Consolidate pause, apply to M125, M600, M24

Marlin/src/Marlin.cpp

@@ -125,6 +125,9 @@
   #include "feature/tmc2130.h"
 #endif
 
+#if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
+  #include "feature/pause.h"
+#endif
 
 bool Running = true;
 
@@ -357,11 +360,6 @@ void suicide() {
  ***************** GCode Handlers *****************
  **************************************************/
 
-#if ENABLED(ADVANCED_PAUSE_FEATURE)
-  // For M125, M600, M24
-  #include "gcode/feature/pause/common.h"
-#endif
-
 #if ENABLED(SDSUPPORT)
   #include "gcode/sdcard/M20.h"           // M20  - List SD card. (Requires SDSUPPORT)
   #include "gcode/sdcard/M21.h"           // M21  - Init SD card. (Requires SDSUPPORT)
@@ -508,10 +506,6 @@ static bool pin_is_protected(const int8_t pin) {
 
 #include "gcode/control/M120_M121.h"
 
-#if ENABLED(PARK_HEAD_ON_PAUSE)
-  #include "gcode/feature/pause/M125.h"
-#endif
-
 #if HAS_COLOR_LEDS
   #include "gcode/feature/leds/M150.h"
 #endif
@@ -612,10 +606,6 @@ void quickstop_stepper() {
   #include "gcode/config/M540.h"
 #endif
 
-#if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #include "gcode/feature/pause/M600.h"
-#endif
-
 #if ENABLED(MK2_MULTIPLEXER)
   #include "gcode/feature/snmm/M702.h"
 #endif

Marlin/src/gcode/feature/pause/common.h → Marlin/src/feature/pause.cpp

@@ -21,21 +21,34 @@
  */
 
 /**
- * feature/pause/common.h - Merge this with its G-codes in the refactor
+ * feature/pause.cpp - Pause feature support functions
+ * This may be combined with related G-codes if features are consolidated.
  */
 
-#ifndef PAUSE_COMMON_H
-#define PAUSE_COMMON_H
+#include "../inc/MarlinConfig.h"
 
-#if IS_KINEMATIC
-  #define RUNPLAN(RATE_MM_S) planner.buffer_line_kinematic(destination, RATE_MM_S, active_extruder)
-#else
-  #define RUNPLAN(RATE_MM_S) line_to_destination(RATE_MM_S)
+#if ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PARK_HEAD_ON_PAUSE)
+
+#include "../Marlin.h"
+#include "../gcode/gcode.h"
+#include "../module/motion.h"
+#include "../module/planner.h"
+#include "../module/stepper.h"
+#include "../module/printcounter.h"
+#include "../module/temperature.h"
+
+#if ENABLED(ULTIPANEL)
+  #include "../lcd/ultralcd.h"
 #endif
 
+#include "../libs/buzzer.h"
+
+// private:
+
 static float resume_position[XYZE];
-static bool move_away_flag = false;
+
 #if ENABLED(SDSUPPORT)
+  #include "../sd/cardreader.h"
   static bool sd_print_paused = false;
 #endif
 
@@ -74,8 +87,18 @@ static void ensure_safe_temperature() {
   }
 }
 
-static bool pause_print(const float &retract, const float &z_lift, const float &x_pos, const float &y_pos,
-                        const float &unload_length = 0 , const int8_t max_beep_count = 0, const bool show_lcd = false
+// public:
+
+bool move_away_flag = false;
+
+#if IS_KINEMATIC
+  #define RUNPLAN(RATE_MM_S) planner.buffer_line_kinematic(destination, RATE_MM_S, active_extruder)
+#else
+  #define RUNPLAN(RATE_MM_S) line_to_destination(RATE_MM_S)
+#endif
+
+bool pause_print(const float &retract, const float &z_lift, const float &x_pos, const float &y_pos,
+                        const float &unload_length/*=0*/ , const int8_t max_beep_count/*=0*/, const bool show_lcd/*=false*/
 ) {
   if (move_away_flag) return false; // already paused
 
@@ -172,7 +195,7 @@ static bool pause_print(const float &retract, const float &z_lift, const float &
   return true;
 }
 
-static void wait_for_filament_reload(const int8_t max_beep_count = 0) {
+void wait_for_filament_reload(const int8_t max_beep_count/*=0*/) {
   bool nozzle_timed_out = false;
 
   // Wait for filament insert by user and press button
@@ -226,7 +249,7 @@ static void wait_for_filament_reload(const int8_t max_beep_count = 0) {
   KEEPALIVE_STATE(IN_HANDLER);
 }
 
-static void resume_print(const float &load_length = 0, const float &initial_extrude_length = 0, const int8_t max_beep_count = 0) {
+void resume_print(const float &load_length/*=0*/, const float &initial_extrude_length/*=0*/, const int8_t max_beep_count/*=0*/) {
   bool nozzle_timed_out = false;
 
   if (!move_away_flag) return;
@@ -332,4 +355,4 @@ static void resume_print(const float &load_length = 0, const float &initial_extr
   move_away_flag = false;
 }
 
-#endif // PAUSE_COMMON_H
+#endif // ADVANCED_PAUSE_FEATURE || PARK_HEAD_ON_PAUSE

Marlin/src/feature/pause.h

+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * feature/pause.h - Pause feature support functions
+ * This may be combined with related G-codes if features are consolidated.
+ */
+
+#ifndef _PAUSE_H_
+#define _PAUSE_H_
+
+extern bool move_away_flag;
+
+bool pause_print(const float &retract, const float &z_lift, const float &x_pos, const float &y_pos,
+                        const float &unload_length=0 , const int8_t max_beep_count=0, const bool show_lcd=false
+);
+
+void wait_for_filament_reload(const int8_t max_beep_count=0);
+
+void resume_print(const float &load_length=0, const float &initial_extrude_length=0, const int8_t max_beep_count=0);
+
+#endif // _PAUSE_H_

Marlin/src/gcode/feature/pause/M125.h → Marlin/src/gcode/feature/pause/M125.cpp

@@ -20,7 +20,13 @@
  *
  */
 
-#include "common.h"
+#include "../../../inc/MarlinConfig.h"
+
+#if ENABLED(PARK_HEAD_ON_PAUSE)
+
+#include "../../gcode.h"
+#include "../../parser.h"
+#include "../../../feature/pause.h"
 
 /**
  * M125: Store current position and move to filament change position.
@@ -37,7 +43,7 @@
  *    Y = override Y
  *    Z = override Z raise
  */
-void gcode_M125() {
+void GcodeSuite::M125() {
 
   // Initial retract before move to filament change position
   const float retract = parser.seen('L') ? parser.value_axis_units(E_AXIS) : 0
@@ -87,3 +93,5 @@ void gcode_M125() {
     #endif
   }
 }
+
+#endif // PARK_HEAD_ON_PAUSE

Marlin/src/gcode/feature/pause/M600.h → Marlin/src/gcode/feature/pause/M600.cpp

@@ -20,7 +20,16 @@
  *
  */
 
-#include "common.h"
+#include "../../../inc/MarlinConfig.h"
+
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+
+#include "../../../feature/pause.h"
+
+#include "../../gcode.h"
+#include "../../parser.h"
+
+#include "../../../module/printcounter.h"
 
 /**
  * M600: Pause for filament change
@@ -36,7 +45,7 @@
  *  Default values are used for omitted arguments.
  *
  */
-void gcode_M600() {
+void GcodeSuite::M600() {
 
   #if ENABLED(HOME_BEFORE_FILAMENT_CHANGE)
     // Don't allow filament change without homing first
@@ -101,3 +110,5 @@ void gcode_M600() {
   // Resume the print job timer if it was running
   if (job_running) print_job_timer.start();
 }
+
+#endif // ADVANCED_PAUSE_FEATURE

Marlin/src/gcode/gcode.cpp

@@ -121,7 +121,6 @@ extern void gcode_M20();
 extern void gcode_M21();
 extern void gcode_M22();
 extern void gcode_M23();
-extern void gcode_M24();
 extern void gcode_M25();
 extern void gcode_M26();
 extern void gcode_M27();
@@ -212,7 +211,6 @@ extern void gcode_M501();
 extern void gcode_M502();
 extern void gcode_M503();
 extern void gcode_M540();
-extern void gcode_M600();
 extern void gcode_M605();
 extern void gcode_M665();
 extern void gcode_M666();
@@ -434,7 +432,7 @@ void GcodeSuite::process_next_command() {
         case 23: // M23: Select file
           gcode_M23(); break;
         case 24: // M24: Start SD print
-          gcode_M24(); break;
+          M24(); break;
         case 25: // M25: Pause SD print
           gcode_M25(); break;
         case 26: // M26: Set SD index
@@ -570,7 +568,7 @@ void GcodeSuite::process_next_command() {
 
       #if ENABLED(PARK_HEAD_ON_PAUSE)
         case 125: // M125: Store current position and move to filament change position
-          gcode_M125(); break;
+          M125(); break;
       #endif
 
       #if ENABLED(BARICUDA)
@@ -911,7 +909,7 @@ void GcodeSuite::process_next_command() {
 
       #if ENABLED(ADVANCED_PAUSE_FEATURE)
         case 600: // M600: Pause for filament change
-          gcode_M600();
+          M600();
           break;
       #endif // ADVANCED_PAUSE_FEATURE
 

Marlin/src/gcode/sdcard/M24.h → Marlin/src/gcode/sdcard/M24.cpp

@@ -20,14 +20,22 @@
  *
  */
 
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
+
+#include "../gcode.h"
+#include "../../sd/cardreader.h"
+#include "../../module/printcounter.h"
+
 #if ENABLED(PARK_HEAD_ON_PAUSE)
-  #include "../feature/pause/common.h"
+  #include "../../feature/pause.h"
 #endif
 
 /**
  * M24: Start or Resume SD Print
  */
-void gcode_M24() {
+void GcodeSuite::M24() {
   #if ENABLED(PARK_HEAD_ON_PAUSE)
     resume_print();
   #endif
@@ -35,3 +43,5 @@ void gcode_M24() {
   card.startFileprint();
   print_job_timer.start();
 }
+
+#endif // SDSUPPORT