- C++ 84.2%
- Python 12%
- JavaScript 3.8%
| .vscode | ||
| img | ||
| include | ||
| lib | ||
| scripts | ||
| src | ||
| test | ||
| .gitignore | ||
| payload_formatter_v3.js | ||
| platformio.ini | ||
| README.md | ||
TTN Mapper T-beam
Energy efficient mapping software for ttnmapper using a T-beam.
Send your GPS-Location over TTS. The Location can be viewed on the advanced maps when the integration is activated.
Features
- deep sleep ESP32 to save energy
- geofence for location upload
- detect no movement
- sleep-mode while not in use
Usage
LED IO4(red):
- off: device in permanent sleep or off
- gliming: device is in deep sleep waiting for the next transmission time
- on: device is active either joining or has woken up to send the next message
LED CHG(blue):
- off: everything ok
- on: battery is charging
LED GPS(red,next to the GPS-Module):
- off: GPS off or no fix
- blinking: GPS has fix
Button Power(PWR):
- short press(1 sec) to turn the device on or if already powered wake up, send the current location and go back to sleep again
- long press(2 sec/wait until IO4 LED goes off) put the device into permanent sleep mode turning off the GPS and radio while preserving LoraWAN credentials
- very long press(10 sec) completely turn off the ESP loosing all credentials
Hardware
I'm using the TTGO-T-beam v1.1(with the axp power management chip onboard)
But the software can easily be modified to run on any ESP32-Board with a GPS and a LoRa module attached.
Compiling
Software
Clone this repository and open it with Visual Studio Code(vscode). This code editor automaticly downloads the extension platformio to compile and upload the program.
Modification
| ⚠️ Modify the config file with your own data! |
|---|
You have to copy config.hpp.example. Insert your own TTS-keys and use or disable the geofencing option
Upload
For uploading just hit the upload-button at the bottom of the vscode window