Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#if NONE(__STM32F1__, STM32F1xx, STM32F0xx)
#error "Oops! Select a 'Malyan M300' board in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "Malyan M300"
//
// EEPROM Emulation
//
#define FLASH_EEPROM_EMULATION
//
// SD CARD SPI
//
#define SDSS SS_PIN
//
// Timers
//
#undef STEP_TIMER
#undef TEMP_TIMER
#define STEP_TIMER 6
#define TEMP_TIMER 7
//
// Limit Switches
//
#define X_MAX_PIN PC13
#define Y_MAX_PIN PC14
#define Z_MAX_PIN PC15
#define Z_MIN_PIN PB7
//
// Steppers
//
#define X_STEP_PIN PB14
#define X_DIR_PIN PB13
#define X_ENABLE_PIN PB10
#define Y_STEP_PIN PB12
#define Y_DIR_PIN PB11
#define Y_ENABLE_PIN PB10
#define Z_STEP_PIN PB2
#define Z_DIR_PIN PB1
#define Z_ENABLE_PIN PB10
#define E0_STEP_PIN PA7
#define E0_DIR_PIN PA6
#define E0_ENABLE_PIN PB0
//
// Temperature Sensors
//
#define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor)
#define TEMP_BED_PIN PA4 // Analog Input (BED thermistor)
//
// Heaters / Fans
//
#define HEATER_0_PIN PA1 // HOTEND0 MOSFET
#define HEATER_BED_PIN PA5 // BED MOSFET
#define AUTO_FAN_PIN PA8