Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
#endif
/**
* 2017 Victor Perez Marlin for stm32f1 test
*/
#define BOARD_INFO_NAME "Chitu3D"
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
#define DISABLE_JTAG
//
// EEPROM
//
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#endif
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
#endif
//
// Limit Switches
//
#define X_STOP_PIN PG10
#define Y_STOP_PIN PA12
#define Z_STOP_PIN PG9
//
// Steppers
//
#define X_ENABLE_PIN PC13
#define X_STEP_PIN PE5
#define X_DIR_PIN PE6
#define Y_ENABLE_PIN PE4
#define Y_STEP_PIN PE2
#define Y_DIR_PIN PE3
#define Z_ENABLE_PIN PE1
#define Z_STEP_PIN PB9
#define Z_DIR_PIN PE0
#define Z2_ENABLE_PIN PF3
#define Z2_STEP_PIN PF5
#define Z2_DIR_PIN PF1
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
#define E0_ENABLE_PIN PB8
#define E0_STEP_PIN PB4
#define E0_DIR_PIN PB5
#define E1_ENABLE_PIN PG8
#define E1_STEP_PIN PC7
#define E1_DIR_PIN PC6
//
// Temperature Sensors
//
#define TEMP_0_PIN PA1 // TH1
#define TEMP_BED_PIN PA0 // TB1
//
// Heaters
//
#define HEATER_0_PIN PG12 // HEATER1
#define HEATER_BED_PIN PG11 // HOT BED
//#define HEATER_BED_INVERTING true
//
// Fans
//
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
#define FAN_PIN PG13 // FAN
#define FAN_PIN_2 PG14
//
// Misc
//
#define BEEPER_PIN PB0
//#define LED_PIN PD3
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
#define FIL_RUNOUT_PIN PA15 // MT_DET
//
// TronXY TFT Support
//
#if ENABLED(FSMC_GRAPHICAL_TFT)
#define FSMC_UPSCALE 3
#define LCD_FULL_PIXEL_WIDTH 480
#define LCD_PIXEL_OFFSET_X 48
#define LCD_FULL_PIXEL_HEIGHT 320
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
#define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
#define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
#define XPT2046_X_CALIBRATION -12316
#define XPT2046_Y_CALIBRATION 8981
#define XPT2046_X_OFFSET 340
#define XPT2046_Y_OFFSET -20
#endif
#endif
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
#define SPI_FLASH_SIZE 0x200000 // 2MB
#if ENABLED(TFT_LVGL_UI)
#define HAS_SPI_FLASH_FONT 0
#define HAS_GCODE_PREVIEW 1
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
#define HAS_LANG_SELECT_SCREEN 0
#define HAS_BAK_VIEW_IN_FLASH 0
//SPI 2
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define TOUCH_CS_PIN PB7 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
// #define TOUCH_INT_PIN PB6
#define SPI_TFT_CS_PIN TOUCH_CS_PIN
#define SPI_TFT_SCK_PIN TOUCH_SCK_PIN
#define SPI_TFT_MISO_PIN TOUCH_MISO_PIN
#define SPI_TFT_MOSI_PIN TOUCH_MOSI_PIN
#define SPI_TFT_DC_PIN PB6
#define SPI_TFT_RST_PIN PF11
#define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13
#define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PD11
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#define LCD_FULL_PIXEL_WIDTH 480
#define LCD_PIXEL_OFFSET_X 48
#define LCD_FULL_PIXEL_HEIGHT 320
#define LCD_PIXEL_OFFSET_Y 48
#define LCD_PIXEL_HEIGHT 320
#define LCD_PIXEL_WIDTH 480
#define XPT2046_X_CALIBRATION -12316
#define XPT2046_Y_CALIBRATION 8981
#define XPT2046_X_OFFSET 340
#define XPT2046_Y_OFFSET -20
#define USE_XPT2046 1
#define XPT2046_XY_SWAP 0
#define XPT2046_X_INV 1
#define XPT2046_Y_INV 0
#define XPT2046_HOR_RES 480
#define XPT2046_VER_RES 320
#define XPT2046_X_MIN 140
#define XPT2046_Y_MIN 200
#define XPT2046_X_MAX 1900
#define XPT2046_Y_MAX 1900
#define XPT2046_AVG 4
#define XPT2046_INV 0
#endif
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// so SPI2 is required.
#define ENABLE_SPI2
#define SCK_PIN PB13
#define MISO_PIN PB14
#define MOSI_PIN PB15
#define SS_PIN PB12
//
// SD Card
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
#define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16