From fe0fe184aa769d4ecc23e86259036bf9ce337dbf Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 11 Apr 2016 19:42:20 -0700
Subject: [PATCH] Replace some tabs with spaces
---
Marlin/example_configurations/SCARA/Configuration.h | 4 ++--
Marlin/pins_PRINTRBOARD_REVF.h | 12 ++++++------
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 436bf22909..40e20cfd78 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -85,8 +85,8 @@
#define SCARA_offset_y -56 //mm
#define SCARA_RAD2DEG 57.2957795 // to convert RAD to degrees
-#define THETA_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M360 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073
-#define PSI_HOMING_OFFSET 0 // calculatated from Calibration Guide and command M364 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073
+#define THETA_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M360 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073
+#define PSI_HOMING_OFFSET 0 //calculatated from Calibration Guide and command M364 / M114 see picture in http://reprap.harleystudio.co.za/?page_id=1073
//some helper variables to make kinematics faster
#define L1_2 sq(Linkage_1) // do not change
diff --git a/Marlin/pins_PRINTRBOARD_REVF.h b/Marlin/pins_PRINTRBOARD_REVF.h
index 3120e04e72..bf4e2b4a41 100644
--- a/Marlin/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/pins_PRINTRBOARD_REVF.h
@@ -90,13 +90,13 @@
// uncomment to enable an I2C based DAC like on the Printrboard REVF
#define DAC_STEPPER_CURRENT
// Number of channels available for DAC, For Printrboar REVF there are 4
-#define DAC_STEPPER_ORDER {3,2,1,0}
+#define DAC_STEPPER_ORDER {3,2,1,0}
-#define DAC_STEPPER_SENSE 0.11
-#define DAC_STEPPER_ADDRESS 0
-#define DAC_STEPPER_MAX 3520
-#define DAC_STEPPER_VREF 1 //internal Vref, gain 1x = 2.048V
-#define DAC_STEPPER_GAIN 0
+#define DAC_STEPPER_SENSE 0.11
+#define DAC_STEPPER_ADDRESS 0
+#define DAC_STEPPER_MAX 3520
+#define DAC_STEPPER_VREF 1 //internal Vref, gain 1x = 2.048V
+#define DAC_STEPPER_GAIN 0
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
--
GitLab