From fc89de6d8b92bf13f5390e6918501c832509b6bd Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sat, 10 Jun 2017 16:27:39 -0500
Subject: [PATCH] Followup to German language update
---
Marlin/language_de.h | 114 +++++++++++++++++++++----------------------
1 file changed, 56 insertions(+), 58 deletions(-)
diff --git a/Marlin/language_de.h b/Marlin/language_de.h
index 5aa647b0d7..a765b42fd7 100644
--- a/Marlin/language_de.h
+++ b/Marlin/language_de.h
@@ -221,64 +221,62 @@
#define MSG_CASE_LIGHT _UxGT("Beleuchtung")
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Helligkeit")
-#if ENABLED(AUTO_BED_LEVELING_UBL)
- #define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!")
- #define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen")
- #define MSG_UBL_TOOLS _UxGT("UBL Tools")
- #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
- #define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")
- #define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen")
- #define MSG_UBL_BC_INSERT2 _UxGT("Messen")
- #define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen")
- #define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...")
- #define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren")
- #define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren")
- #define MSG_UBL_SET_BED_TEMP _UxGT("Bett Temp.")
- #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
- #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.")
- #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
- #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.")
- #define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...")
- #define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")
- #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")
- #define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")
- #define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA")
- #define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS")
- #define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
- #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.")
- #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
- #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
- #define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA")
- #define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS")
- #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
- #define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
- #define MSG_UBL_MESH_LEVELING _UxGT("Netz Nivellierung")
- #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt Nivellierung")
- #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz Nivell.")
- #define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren")
- #define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte")
- #define MSG_UBL_MAP_TYPE _UxGT("Kartentyp")
- #define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben")
- #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host")
- #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV")
- #define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben")
- #define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten")
- #define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Fill-in")
- #define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Fill-in")
- #define MSG_UBL_SMART_FILLIN _UxGT("Kluges Fill-in")
- #define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Netz")
- #define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren")
- #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.")
- #define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinstellung Alle")
- #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.")
- #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz")
- #define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
- #define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden")
- #define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern")
- #define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern")
- #define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.")
- #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")
-#endif // AUTO_BED_LEVELING_UBL
+#define MSG_UBL_DOING_G29 _UxGT("G29 UBL läuft!")
+#define MSG_UBL_UNHOMED _UxGT("Erst XYZ homen")
+#define MSG_UBL_TOOLS _UxGT("UBL Tools")
+#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
+#define MSG_UBL_MANUAL_MESH _UxGT("Netz manuell erst.")
+#define MSG_UBL_BC_INSERT _UxGT("Unterlegen & messen")
+#define MSG_UBL_BC_INSERT2 _UxGT("Messen")
+#define MSG_UBL_BC_REMOVE _UxGT("Entfernen & messen")
+#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...")
+#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren")
+#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren")
+#define MSG_UBL_SET_BED_TEMP _UxGT("Bett Temp.")
+#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
+#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp.")
+#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
+#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.")
+#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...")
+#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")
+#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")
+#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")
+#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA")
+#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS")
+#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
+#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netz Höhe einst.")
+#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
+#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
+#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA")
+#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS")
+#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
+#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
+#define MSG_UBL_MESH_LEVELING _UxGT("Netz Nivellierung")
+#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt Nivellierung")
+#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Gitternetz Nivell.")
+#define MSG_UBL_MESH_LEVEL _UxGT("Netz nivellieren")
+#define MSG_UBL_SIDE_POINTS _UxGT("Eckpunkte")
+#define MSG_UBL_MAP_TYPE _UxGT("Kartentyp")
+#define MSG_UBL_OUTPUT_MAP _UxGT("Karte ausgeben")
+#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Ausgabe für Host")
+#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Ausgabe für CSV")
+#define MSG_UBL_INFO_UBL _UxGT("UBL Info ausgeben")
+#define MSG_UBL_EDIT_MESH_MENU _UxGT("Netz bearbeiten")
+#define MSG_UBL_FILLIN_AMOUNT _UxGT("Menge an Fill-in")
+#define MSG_UBL_MANUAL_FILLIN _UxGT("Manuelles Fill-in")
+#define MSG_UBL_SMART_FILLIN _UxGT("Kluges Fill-in")
+#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Netz")
+#define MSG_UBL_INVALIDATE_ALL _UxGT("Alles annullieren")
+#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Nächstlieg. ann.")
+#define MSG_UBL_FINE_TUNE_ALL _UxGT("Feineinstellung Alle")
+#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Feineinst. Nächstl.")
+#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Netz Speicherplatz")
+#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
+#define MSG_UBL_LOAD_MESH _UxGT("Bett Netz laden")
+#define MSG_UBL_SAVE_MESH _UxGT("Bett Netz speichern")
+#define MSG_UBL_SAVE_ERROR _UxGT("ERR:UBL speichern")
+#define MSG_UBL_RESTORE_ERROR _UxGT("ERR:UBL wiederherst.")
+#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT _UxGT("Gesamte Drucke")
--
GitLab