From f93c60a6f06d0f9c837a580e6dccf48c5ddf0bcd Mon Sep 17 00:00:00 2001
From: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date: Wed, 12 Jun 2019 17:44:39 -0700
Subject: [PATCH] Bring Sidewinder X1 config up to date (#14271)
---
.../Sidewinder X1/Configuration.h | 53 +++++------
.../Sidewinder X1/Configuration_adv.h | 94 +++++++++++++++++--
2 files changed, 109 insertions(+), 38 deletions(-)
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index e9c409846f..589d25d520 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -137,7 +137,7 @@
// Optional custom name for your RepStrap or other custom machine
// Displayed in the LCD "Ready" message
-//#define CUSTOM_MACHINE_NAME "Sidewinder X1"
+#define CUSTOM_MACHINE_NAME "Sidewinder X1"
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
@@ -359,6 +359,7 @@
* 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
* 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
* 15 : 100k thermistor calibration for JGAurora A5 hotend
+ * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
* 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
@@ -384,7 +385,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
+ * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -511,6 +512,12 @@
#define DEFAULT_bedKi 45.87
#define DEFAULT_bedKd 325.08
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
+
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
//#define DEFAULT_bedKp 97.1
@@ -826,16 +833,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
-
- /**
- * BLTouch V3.0 and newer smart series
- * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
- * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
- */
- //#define BLTOUCH_FORCE_5V_MODE
-#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
@@ -856,23 +853,23 @@
//
/**
- * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
- * X and Y offsets must be integers.
+ * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
+ * X and Y offsets must be integers.
*
- * In the following example the X and Y offsets are both positive:
- * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
- * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ * In the following example the X and Y offsets are both positive:
+ * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
*
- * +-- BACK ---+
- * | |
- * L | (+) P | R <-- probe (20,20)
- * E | | I
- * F | (-) N (+) | G <-- nozzle (10,10)
- * T | | H
- * | (-) | T
- * | |
- * O-- FRONT --+
- * (0,0)
+ * +-- BACK ---+
+ * | |
+ * L | (+) P | R <-- probe (20,20)
+ * E | | I
+ * F | (-) N (+) | G <-- nozzle (10,10)
+ * T | | H
+ * | (-) | T
+ * | |
+ * O-- FRONT --+
+ * (0,0)
*/
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
@@ -1368,7 +1365,7 @@
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
*/
-#define EEPROM_SETTINGS // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
#if ENABLED(EEPROM_SETTINGS)
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index c2d292b038..5a901a5456 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -375,17 +375,14 @@
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
- //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+ //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
+ //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
//#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
#if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
#define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
#endif
#endif
-//===========================================================================
-//============================ Mechanical Settings ==========================
-//===========================================================================
-
// @section homing
// If you want endstops to stay on (by default) even when not homing
@@ -518,7 +515,7 @@
#define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
-#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
+#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing
// When G28 is called, this option will make Y home before X
@@ -527,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
@@ -577,8 +641,11 @@
// @section lcd
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
+ #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 2*60} // Feedrates for manual moves along X, Y, Z, E from panel
+#endif
+
#if ENABLED(ULTIPANEL)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif
@@ -851,7 +918,7 @@
*/
//#define POWER_LOSS_RECOVERY
#if ENABLED(POWER_LOSS_RECOVERY)
- //#define POWER_LOSS_PIN 44 // Pin to detect power loss (optional)
+ //#define POWER_LOSS_PIN 44 // Pin to detect power loss
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
@@ -913,7 +980,7 @@
* This feature must be enabled with "M540 S1" or from the LCD menu.
* To have any effect, endstops must be enabled during SD printing.
*/
- //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+ //#define SD_ABORT_ON_ENDSTOP_HIT
/**
* This option makes it easier to print the same SD Card file again.
@@ -1043,6 +1110,7 @@
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
+ #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
@@ -1129,7 +1197,7 @@
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
- #define LIN_ADVANCE_K 0.08 // Unit: mm compression per 1mm/s extruder speed
+ #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#endif
@@ -1763,6 +1831,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
+ /**
+ * Beta feature!
+ * Create a 50/50 square wave step pulse optimal for stepper drivers.
+ */
+ //#define SQUARE_WAVE_STEPPING
+
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.
--
GitLab