diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index a2f5c5d59531a92b18f21135c456c15863312de6..f8dcb58132e18033712f685515813a0372598e07 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -185,6 +185,8 @@ #define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini #define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard #define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan) +#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed) +#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver) // // SAM3X8E ARM Cortex M3 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index bdc0d34d1ecdd8b28ac849050f036e4ed5b86485..f356e4f4a0f1f971296c4986b8d03fee301ab9e7 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -320,6 +320,10 @@ #include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769 #elif MB(SMOOTHIEBOARD) #include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769 +#elif MB(BIQU_SKR_V1_1) + #include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768 +#elif MB(BIQU_B300_V1_0) + #include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768 // // Other 32-bit Boards diff --git a/Marlin/src/pins/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/pins_BIQU_B300_V1.0.h new file mode 100644 index 0000000000000000000000000000000000000000..821483db2db8927db8c8e4c9e1477eda45e83685 --- /dev/null +++ b/Marlin/src/pins/pins_BIQU_B300_V1.0.h @@ -0,0 +1,183 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +/** + * BIQU BQ111-A4 + * + * Applies to the following boards: + * + * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) + * + */ + +#ifndef TARGET_LPC1768 + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "BIQU Thunder B300 V1.0" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series + + +// +// Steppers +// +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#ifndef X_CS_PIN + #define X_CS_PIN P1_15 // ETH +#endif + + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#ifndef Y_CS_PIN + #define Y_CS_PIN P1_14 // ETH +#endif + +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#ifndef Z_CS_PIN + #define Z_CS_PIN P1_16 // ETH +#endif + +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#ifndef E0_CS_PIN + #define E0_CS_PIN P1_17 // ETH +#endif + + +// +// Software SPI pins for TMC2130 stepper drivers +// +#if ENABLED(TMC_USE_SW_SPI) + #define TMC_SW_MOSI P0_18 // ETH + #define TMC_SW_MISO P0_17 // ETH + #define TMC_SW_SCK P0_15 // ETH +#endif + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_0_PIN 1 // A0 (T0) +#define TEMP_BED_PIN 0 // A1 (T1) + + +// +// Heaters / Fans +// +#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 +#ifndef FAN_PIN + #define FAN_PIN P2_04 +#endif + +// +// Unused +// +//#define PIN_P2_10 P2_10 // IBOOT-1 +//#define PIN_P0_27 P0_27 // Onboard SD Detect + +/** + * LCD / Controller + * + * REPRAP_DISCOUNT_SMART_CONTROLLER is not supported due to the lack of LCD_PINS_D5, + * LCD_PINS_D6 or LCD_PINS_D7 in the EXP1 connector. + * + * A remote SD card is not supported as the pins routed to EXP2 are the same as used + * for the onboard SD card, and a chip select signal is not provided for the remote + * SD card. + */ +#if ENABLED(ULTRA_LCD) + + #define BEEPER_PIN P1_31 // EXP1-1 + + #define BTN_EN1 P3_26 // EXP2-3 + #define BTN_EN2 P3_25 // EXP2-5 + #define BTN_ENC P1_30 // EXP1-2 + + #define SD_DETECT_PIN P0_27 // EXP2-7 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 + #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 + + #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD) + #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" + #endif + + #if ENABLED(SDSUPPORT) + #error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used" + #endif + +#endif // ULTRA_LCD + +/** + * SD Card Reader + * + * Software SPI is used to interface with a stand-alone SD card reader connected to EXP1. + * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board. + */ +#if ENABLED(SDSUPPORT) + + #define SCK_PIN P0_15 // EXP1-5 + #define MISO_PIN P0_16 // EXP1-4 + #define MOSI_PIN P0_18 // EXP1-3 + #define SS_PIN P1_30 // EXP1-2 + #define SDSS SS_PIN + +#endif // SDSUPPORT + +/** + * PWMS + * + * There are 6 PWMS. Each PWM can be assigned to one of two pins. + * + * PWM1.1 P0_18 LCD_PINS_ENABLE + * PWM1.1 P2_0 X_STEP_PIN + * PWM1.2 P1_20 <none> + * PWM1.2 P2_1 Y_STEP_PIN + * PWM1.3 P1_21 <none> + * PWM1.3 P2_2 Z_STEP_PIN + * PWM1.4 P1_23 <none> + * PWM1.4 P2_3 E0_STEP_PIN + * PWM1.5 P1_24 X_MIN_PIN + * PWM1.5 P2_4 FAN_PIN + * PWM1.6 P1_26 Y_MIN_PIN + * PWM1.6 P2_5 HEATER_BED_PIN + */ diff --git a/Marlin/src/pins/pins_BIQU_SKR_V1.1.h b/Marlin/src/pins/pins_BIQU_SKR_V1.1.h new file mode 100644 index 0000000000000000000000000000000000000000..9f1625021fb727577358d6a8ba195b5e222e7f5a --- /dev/null +++ b/Marlin/src/pins/pins_BIQU_SKR_V1.1.h @@ -0,0 +1,194 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef TARGET_LPC1768 + #error "Oops! Make sure you have the LPC1768 environment selected in your IDE." +#endif + +#ifndef BOARD_NAME + #define BOARD_NAME "BIQU SKR V1.1" +#endif + +// +// Limit Switches +// +#define X_MIN_PIN P1_29 +#define X_MAX_PIN P1_28 +#define Y_MIN_PIN P1_27 +#define Y_MAX_PIN P1_26 +#define Z_MIN_PIN P1_25 +#define Z_MAX_PIN P1_24 + +// +// Steppers +// +#define X_STEP_PIN P0_04 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P4_28 + +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P2_02 +#define Y_ENABLE_PIN P2_00 + +#define Z_STEP_PIN P0_20 +#define Z_DIR_PIN P0_21 +#define Z_ENABLE_PIN P0_19 + +#define E0_STEP_PIN P0_11 +#define E0_DIR_PIN P2_13 +#define E0_ENABLE_PIN P2_12 + +#define E1_STEP_PIN P0_01 +#define E1_DIR_PIN P0_00 +#define E1_ENABLE_PIN P0_10 + +// +// Temperature Sensors +// 3.3V max when defined as an analog input +// +#define TEMP_BED_PIN 0 // A0 (T0) - (67) - TEMP_BED_PIN +#define TEMP_0_PIN 1 // A1 (T1) - (68) - TEMP_0_PIN +#define TEMP_1_PIN 2 // A2 (T2) - (69) - TEMP_1_PIN + +// +// Heaters / Fans +// +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_04 +#define FAN_PIN P2_03 +#define HEATER_BED_PIN P2_05 + +// +// Misc. Functions +// +#define SDSS P1_23 // (53) + +/** + * LCD / Controller + * + * All controllers can use J3 and J5 on the Re-ARM board. Custom cabling will be required. + */ + +/** + * Smart LCD adapter + * + * The Smart LCD adapter can be used for the two 10 pin LCD controllers such as + * REPRAP_DISCOUNT_SMART_CONTROLLER. It can't be used for controllers that use + * DOGLCD_A0, DOGLCD_CS, LCD_PINS_D5, LCD_PINS_D6 or LCD_PINS_D7. A custom cable + * is needed to pick up 5V for the EXP1 connection. + * + * SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines + * on the LCD display during accesses of the SD card. The menus/code has been arranged so + * that the garbage/lines are erased immediately after the SD card accesses are completed. + */ + +#if ENABLED(ULTRA_LCD) + + #if ENABLED(CR10_STOCKDISPLAY) + + // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3. + // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one + // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. + // Requires REVERSE_ENCODER_DIRECTION in Configuration.h + + #define BEEPER_PIN P2_11 // J3-3 & AUX-4 + + #define BTN_EN1 P0_16 // J3-7 & AUX-4 + #define BTN_EN2 P1_23 // J3-5 & AUX-4 + #define BTN_ENC P3_25 // J3-4 & AUX-4 + + #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) + #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) + #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) + + #else + + #define BEEPER_PIN P1_30 // (37) not 5V tolerant + + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + + #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 + + #if ENABLED(REPRAPWORLD_KEYPAD) + #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #elif DISABLED(NEWPANEL) + //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + #endif + + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + // #define LCD_SCREEN_ROT_180 + + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + + #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + + #define DOGLCD_CS P0_16 // (16) + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN + + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes + #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #else + #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 + #if ENABLED(ULTIPANEL) + #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO + #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER + #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 + #endif + #endif + + //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 + //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 + //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 + //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS + + #if ENABLED(MINIPANEL) + // GLCD features + //#define LCD_CONTRAST 190 + // Uncomment screen orientation + //#define LCD_SCREEN_ROT_90 + //#define LCD_SCREEN_ROT_180 + //#define LCD_SCREEN_ROT_270 + #endif + + #endif + +#endif // ULTRA_LCD