diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h
index ae7e3b5299f59c8bbe8b9529859b935208a431b7..a41919f91cf39fea607de4275192482d05a60ec3 100644
--- a/Marlin/src/lcd/language/language_fr.h
+++ b/Marlin/src/lcd/language/language_fr.h
@@ -51,7 +51,7 @@
#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant")
#define MSG_LEVEL_BED_DONE _UxGT("Mise a niveau OK!")
-#define MSG_Z_FADE_HEIGHT _UxGT("Adoucir hauteur")
+#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissee")
#define MSG_SET_HOME_OFFSETS _UxGT("Regl. decal. origine")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalages appliques")
#define MSG_SET_ORIGIN _UxGT("Regler origine")
@@ -71,7 +71,7 @@
#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.")
#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.")
#define MSG_EXTRUDE _UxGT("Extrusion")
-#define MSG_RETRACT _UxGT("Retraction")
+#define MSG_RETRACT _UxGT("Retrait")
#define MSG_MOVE_AXIS _UxGT("Deplacer un axe")
#define MSG_BED_LEVELING _UxGT("Regl. Niv. lit")
#define MSG_LEVEL_BED _UxGT("Regl. Niv. lit")
@@ -120,14 +120,14 @@
#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille")
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hote")
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV")
-#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup")
+#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.")
#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL")
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille")
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage")
#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel")
#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto")
#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage")
-#define MSG_UBL_INVALIDATE_ALL _UxGT("Annuler tout")
+#define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler")
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus pres")
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Reglage fin (tous)")
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Reglage fin (proche)")
@@ -140,11 +140,11 @@
#define MSG_NO_STORAGE _UxGT("Pas de memoire")
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL")
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL")
-#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z stoppe")
-#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas-a-pas")
+#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Decal. Z arrete")
+#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas a pas")
-#define MSG_LED_CONTROL _UxGT("Control LED")
-#define MSG_LEDS_ON _UxGT("Lumieres ON")
+#define MSG_LED_CONTROL _UxGT("Controle LED")
+#define MSG_LEDS_ON _UxGT("Lumiere ON")
#define MSG_LEDS_OFF _UxGT("Lumiere OFF")
#define MSG_LED_PRESETS _UxGT("Preregl. LED.")
#define MSG_SET_LEDS_RED _UxGT("Rouge")
@@ -195,23 +195,23 @@
#define MSG_ACC _UxGT("Acceleration")
#define MSG_JERK _UxGT("Jerk")
#if IS_KINEMATIC
- #define MSG_VA_JERK _UxGT("Va-jerk")
- #define MSG_VB_JERK _UxGT("Vb-jerk")
- #define MSG_VC_JERK _UxGT("Vc-jerk")
+ #define MSG_VA_JERK _UxGT("Va jerk")
+ #define MSG_VB_JERK _UxGT("Vb jerk")
+ #define MSG_VC_JERK _UxGT("Vc jerk")
#else
- #define MSG_VA_JERK _UxGT("Vx-jerk")
- #define MSG_VB_JERK _UxGT("Vy-jerk")
- #define MSG_VC_JERK _UxGT("Vz-jerk")
+ #define MSG_VA_JERK _UxGT("Vx jerk")
+ #define MSG_VB_JERK _UxGT("Vy jerk")
+ #define MSG_VC_JERK _UxGT("Vz jerk")
#endif
-#define MSG_VE_JERK _UxGT("Ve-jerk")
+#define MSG_VE_JERK _UxGT("Ve jerk")
#define MSG_VELOCITY _UxGT("Velocite")
#define MSG_VMAX _UxGT("Vmax")
#define MSG_VMIN _UxGT("Vmin")
-#define MSG_VTRAV_MIN _UxGT("Vdepl min")
+#define MSG_VTRAV_MIN _UxGT("V depl. min")
#define MSG_ACCELERATION _UxGT("Acceleration")
#define MSG_AMAX _UxGT("Amax ")
-#define MSG_A_RETRACT _UxGT("A-retract")
-#define MSG_A_TRAVEL _UxGT("A-Depl.")
+#define MSG_A_RETRACT _UxGT("A retrait")
+#define MSG_A_TRAVEL _UxGT("A Depl.")
#define MSG_STEPS_PER_MM _UxGT("Pas/mm")
#if IS_KINEMATIC
#define MSG_ASTEPS _UxGT("A pas/mm")
@@ -235,7 +235,7 @@
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.")
#define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm")
#define MSG_FILAMENT_LOAD _UxGT("Charger mm")
-#define MSG_ADVANCE_K _UxGT("Advance K")
+#define MSG_ADVANCE_K _UxGT("Avance K")
#define MSG_CONTRAST _UxGT("Contraste LCD")
#define MSG_STORE_EEPROM _UxGT("Sauver config")
#define MSG_LOAD_EEPROM _UxGT("Lire config")
@@ -258,22 +258,22 @@
#define MSG_NO_MOVE _UxGT("Moteurs bloques.")
#define MSG_KILLED _UxGT("MORT.")
#define MSG_STOPPED _UxGT("STOPPE.")
-#define MSG_CONTROL_RETRACT _UxGT("Retraction mm")
+#define MSG_CONTROL_RETRACT _UxGT("Retrait mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm")
-#define MSG_CONTROL_RETRACTF _UxGT("Retraction V")
+#define MSG_CONTROL_RETRACTF _UxGT("Retrait V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saut Z mm")
-#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. UnRet mm")
-#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
-#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. UnRet V")
-#define MSG_AUTORETRACT _UxGT("Retract. Auto.")
+#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rapp. mm")
+#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V")
+#define MSG_AUTORETRACT _UxGT("Retrait. Auto.")
#define MSG_FILAMENTCHANGE _UxGT("Changer filament")
#define MSG_FILAMENTLOAD _UxGT("Charger fil.")
#define MSG_FILAMENTUNLOAD _UxGT("Decharger fil.")
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout")
#define MSG_INIT_SDCARD _UxGT("Init. la carte SD")
#define MSG_CNG_SDCARD _UxGT("Changer de carte")
-#define MSG_ZPROBE_OUT _UxGT("Z sonde exte. lit")
+#define MSG_ZPROBE_OUT _UxGT("Z sonde hors lit")
#define MSG_SKEW_FACTOR _UxGT("Facteur ecart")
#define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
diff --git a/Marlin/src/lcd/language/language_fr_utf8.h b/Marlin/src/lcd/language/language_fr_utf8.h
index fcbfdf5fad78a247e3439760910ef05391e36015..9bb3fadff02bba911b650f9e3631d6d2417fde99 100644
--- a/Marlin/src/lcd/language/language_fr_utf8.h
+++ b/Marlin/src/lcd/language/language_fr_utf8.h
@@ -52,8 +52,8 @@
#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant")
#define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!")
-#define MSG_Z_FADE_HEIGHT _UxGT("Adoucir hauteur")
-#define MSG_SET_HOME_OFFSETS _UxGT("Regl. décal. origine")
+#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissée")
+#define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal. origine")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués")
#define MSG_SET_ORIGIN _UxGT("Régler origine")
#define MSG_PREHEAT_1 _UxGT("Préchauffage PLA")
@@ -61,24 +61,24 @@
#define MSG_PREHEAT_1_ALL _UxGT("Préch. PLA Tout")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" fini")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. PLA lit")
-#define MSG_PREHEAT_1_SETTINGS _UxGT("Regl. prech. PLA")
+#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. PLA")
#define MSG_PREHEAT_2 _UxGT("Préchauffage ABS")
#define MSG_PREHEAT_2_N _UxGT("Préchauff. ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Préch. ABS Tout")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" fini")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. ABS lit")
-#define MSG_PREHEAT_2_SETTINGS _UxGT("Regl. prech. ABS")
+#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. ABS")
#define MSG_COOLDOWN _UxGT("Refroidir")
#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.")
-#define MSG_SWITCH_PS_OFF _UxGT("Éteindre alim.")
-#define MSG_EXTRUDE _UxGT("Éxtrusion")
-#define MSG_RETRACT _UxGT("Rétraction")
+#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.")
+#define MSG_EXTRUDE _UxGT("Extrusion")
+#define MSG_RETRACT _UxGT("Retrait")
#define MSG_MOVE_AXIS _UxGT("Déplacer un axe")
-#define MSG_BED_LEVELING _UxGT("Règl. Niv. lit")
-#define MSG_LEVEL_BED _UxGT("Règl. Niv. lit")
+#define MSG_BED_LEVELING _UxGT("Régl. Niv. lit")
+#define MSG_LEVEL_BED _UxGT("Régl. Niv. lit")
#define MSG_LEVEL_CORNERS _UxGT("Niveau coins")
#define MSG_NEXT_CORNER _UxGT("Coin suivant")
-#define MSG_EDITING_STOPPED _UxGT("Arrêt edit. maillage")
+#define MSG_EDITING_STOPPED _UxGT("Arrêt édit. maillage")
#define MSG_USER_MENU _UxGT("Commandes perso")
#define MSG_UBL_DOING_G29 _UxGT("G29 en cours")
@@ -96,7 +96,7 @@
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
-#define MSG_UBL_MESH_EDIT _UxGT("Éditer maille")
+#define MSG_UBL_MESH_EDIT _UxGT("Editer maille")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille")
@@ -121,14 +121,14 @@
#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille")
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hôte")
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV")
-#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup")
+#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.")
#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL")
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille")
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage")
#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel")
#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto")
#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage")
-#define MSG_UBL_INVALIDATE_ALL _UxGT("Annuler tout")
+#define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler")
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus près")
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Réglage fin (tous)")
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Réglage fin (proche)")
@@ -141,13 +141,13 @@
#define MSG_NO_STORAGE _UxGT("Pas de mémoire")
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL")
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL")
-#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z arrêté")
-#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas-à-pas")
+#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Décal. Z arrêté")
+#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas à pas")
-#define MSG_LED_CONTROL _UxGT("Control LED")
-#define MSG_LEDS_ON _UxGT("Lumières ON")
+#define MSG_LED_CONTROL _UxGT("Contrôle LED")
+#define MSG_LEDS_ON _UxGT("Lumière ON")
#define MSG_LEDS_OFF _UxGT("Lumière OFF")
-#define MSG_LED_PRESETS _UxGT("Preregl. LED.")
+#define MSG_LED_PRESETS _UxGT("Préregl. LED")
#define MSG_SET_LEDS_RED _UxGT("Rouge")
#define MSG_SET_LEDS_ORANGE _UxGT("Orange")
#define MSG_SET_LEDS_YELLOW _UxGT("Jaune")
@@ -196,23 +196,23 @@
#define MSG_ACC _UxGT("Accélération")
#define MSG_JERK _UxGT("Jerk")
#if IS_KINEMATIC
- #define MSG_VA_JERK _UxGT("Va-jerk")
- #define MSG_VB_JERK _UxGT("Vb-jerk")
- #define MSG_VC_JERK _UxGT("Vc-jerk")
+ #define MSG_VA_JERK _UxGT("Va jerk")
+ #define MSG_VB_JERK _UxGT("Vb jerk")
+ #define MSG_VC_JERK _UxGT("Vc jerk")
#else
- #define MSG_VA_JERK _UxGT("Vx-jerk")
- #define MSG_VB_JERK _UxGT("Vy-jerk")
- #define MSG_VC_JERK _UxGT("Vz-jerk")
+ #define MSG_VA_JERK _UxGT("Vx jerk")
+ #define MSG_VB_JERK _UxGT("Vy jerk")
+ #define MSG_VC_JERK _UxGT("Vz jerk")
#endif
-#define MSG_VE_JERK _UxGT("Ve-jerk")
+#define MSG_VE_JERK _UxGT("Ve jerk")
#define MSG_VELOCITY _UxGT("Vélocité")
#define MSG_VMAX _UxGT("Vmax")
#define MSG_VMIN _UxGT("Vmin")
-#define MSG_VTRAV_MIN _UxGT("Vdepl min")
+#define MSG_VTRAV_MIN _UxGT("V dépl. min")
#define MSG_ACCELERATION _UxGT("Accélération")
#define MSG_AMAX _UxGT("Amax ")
-#define MSG_A_RETRACT _UxGT("A-retract")
-#define MSG_A_TRAVEL _UxGT("A-Dépl.")
+#define MSG_A_RETRACT _UxGT("A retrait")
+#define MSG_A_TRAVEL _UxGT("A Dépl.")
#define MSG_STEPS_PER_MM _UxGT("Pas/mm")
#if IS_KINEMATIC
#define MSG_ASTEPS _UxGT("A pas/mm")
@@ -234,9 +234,9 @@
#define MSG_FILAMENT _UxGT("Filament")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.")
-#define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm")
+#define MSG_FILAMENT_UNLOAD _UxGT("Décharger mm")
#define MSG_FILAMENT_LOAD _UxGT("Charger mm")
-#define MSG_ADVANCE_K _UxGT("Advance K")
+#define MSG_ADVANCE_K _UxGT("Avance K")
#define MSG_CONTRAST _UxGT("Contraste LCD")
#define MSG_STORE_EEPROM _UxGT("Sauver config")
#define MSG_LOAD_EEPROM _UxGT("Lire config")
@@ -259,23 +259,23 @@
#define MSG_NO_MOVE _UxGT("Moteurs bloqués.")
#define MSG_KILLED _UxGT("MORT.")
#define MSG_STOPPED _UxGT("STOPPÉ.")
-#define MSG_CONTROL_RETRACT _UxGT("Retraction mm")
+#define MSG_CONTROL_RETRACT _UxGT("Retrait mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm")
-#define MSG_CONTROL_RETRACTF _UxGT("Rétraction V")
+#define MSG_CONTROL_RETRACTF _UxGT("Retrait V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Saut Z mm")
-#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. UnRet mm")
-#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
-#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. UnRet V")
-#define MSG_AUTORETRACT _UxGT("Rétract. Auto.")
+#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rappel mm")
+#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V")
+#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Retour V")
+#define MSG_AUTORETRACT _UxGT("Retrait. Auto.")
#define MSG_FILAMENTCHANGE _UxGT("Changer filament")
#define MSG_FILAMENTLOAD _UxGT("Charger fil.")
-#define MSG_FILAMENTUNLOAD _UxGT("Decharger fil.")
-#define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout")
+#define MSG_FILAMENTUNLOAD _UxGT("Décharger fil.")
+#define MSG_FILAMENTUNLOAD_ALL _UxGT("Décharger tout")
#define MSG_INIT_SDCARD _UxGT("Init. la carte SD")
#define MSG_CNG_SDCARD _UxGT("Changer de carte")
-#define MSG_ZPROBE_OUT _UxGT("Z sonde extè. lit")
-#define MSG_SKEW_FACTOR _UxGT("Facteur ecart")
+#define MSG_ZPROBE_OUT _UxGT("Z sonde hors lit")
+#define MSG_SKEW_FACTOR _UxGT("Facteur écart")
#define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch")
#define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch")
@@ -289,7 +289,7 @@
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Butée abandon")
#define MSG_HEATING_FAILED_LCD _UxGT("Erreur de chauffe")
-#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANT")
+#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANTE")
#define MSG_THERMAL_RUNAWAY _UxGT("EMBALLEMENT THERM.")
#define MSG_ERR_MAXTEMP _UxGT("Err: TEMP. MAX")
#define MSG_ERR_MINTEMP _UxGT("Err: TEMP. MIN")
@@ -298,14 +298,14 @@
#define MSG_ERR_Z_HOMING _UxGT("G28 Z interdit")
#define MSG_HALTED _UxGT("IMPR. STOPPÉE")
-#define MSG_PLEASE_RESET _UxGT("RaZ. SVP")
+#define MSG_PLEASE_RESET _UxGT("RàZ. SVP")
#define MSG_SHORT_DAY _UxGT("j") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("En chauffe...")
#define MSG_HEATING_COMPLETE _UxGT("Chauffe terminée")
-#define MSG_BED_HEATING _UxGT("Lit en chauffe..")
+#define MSG_BED_HEATING _UxGT("Lit en chauffe...")
#define MSG_BED_DONE _UxGT("Chauffe lit terminée")
#define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta")
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X")