From f7792c01929ae10f460fe1de35f7cdde468f91ec Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Wed, 12 Jun 2019 19:48:35 -0500
Subject: [PATCH] Group manual move options
---
Marlin/Configuration_adv.h | 11 +++++------
config/default/Configuration_adv.h | 11 +++++------
config/examples/3DFabXYZ/Migbot/Configuration_adv.h | 11 +++++------
config/examples/AlephObjects/TAZ4/Configuration_adv.h | 11 +++++------
.../examples/AliExpress/UM2pExt/Configuration_adv.h | 11 +++++------
config/examples/Anet/A2/Configuration_adv.h | 11 +++++------
config/examples/Anet/A2plus/Configuration_adv.h | 11 +++++------
config/examples/Anet/A6/Configuration_adv.h | 11 +++++------
config/examples/Anet/A8/Configuration_adv.h | 11 +++++------
config/examples/Anet/A8plus/Configuration_adv.h | 11 +++++------
config/examples/Anet/E16/Configuration_adv.h | 11 +++++------
config/examples/AnyCubic/i3/Configuration_adv.h | 11 +++++------
config/examples/ArmEd/Configuration_adv.h | 11 +++++------
.../examples/BIBO/TouchX/cyclops/Configuration_adv.h | 11 +++++------
.../examples/BIBO/TouchX/default/Configuration_adv.h | 11 +++++------
config/examples/BQ/Hephestos/Configuration_adv.h | 11 +++++------
config/examples/BQ/Hephestos_2/Configuration_adv.h | 11 +++++------
config/examples/BQ/WITBOX/Configuration_adv.h | 11 +++++------
config/examples/Cartesio/Configuration_adv.h | 11 +++++------
config/examples/Creality/CR-10/Configuration_adv.h | 11 +++++------
config/examples/Creality/CR-10S/Configuration_adv.h | 11 +++++------
config/examples/Creality/CR-10_5S/Configuration_adv.h | 11 +++++------
.../examples/Creality/CR-10mini/Configuration_adv.h | 11 +++++------
config/examples/Creality/CR-8/Configuration_adv.h | 11 +++++------
config/examples/Creality/Ender-2/Configuration_adv.h | 11 +++++------
config/examples/Creality/Ender-3/Configuration_adv.h | 11 +++++------
config/examples/Creality/Ender-4/Configuration_adv.h | 11 +++++------
.../Dagoma/Disco Ultimate/Configuration_adv.h | 11 +++++------
.../Sidewinder X1/Configuration_adv.h | 11 +++++------
config/examples/Einstart-S/Configuration_adv.h | 11 +++++------
config/examples/Felix/Configuration_adv.h | 11 +++++------
.../FlashForge/CreatorPro/Configuration_adv.h | 11 +++++------
.../examples/FolgerTech/i3-2020/Configuration_adv.h | 11 +++++------
config/examples/Formbot/Raptor/Configuration_adv.h | 11 +++++------
config/examples/Formbot/T_Rex_2+/Configuration_adv.h | 11 +++++------
config/examples/Formbot/T_Rex_3/Configuration_adv.h | 11 +++++------
config/examples/Geeetech/A10/Configuration_adv.h | 11 +++++------
config/examples/Geeetech/A10M/Configuration_adv.h | 11 +++++------
config/examples/Geeetech/A20M/Configuration_adv.h | 11 +++++------
.../examples/Geeetech/MeCreator2/Configuration_adv.h | 11 +++++------
.../Geeetech/Prusa i3 Pro C/Configuration_adv.h | 11 +++++------
.../Geeetech/Prusa i3 Pro W/Configuration_adv.h | 11 +++++------
config/examples/Infitary/i3-M508/Configuration_adv.h | 11 +++++------
config/examples/JGAurora/A5/Configuration_adv.h | 11 +++++------
config/examples/MakerParts/Configuration_adv.h | 11 +++++------
config/examples/Malyan/M150/Configuration_adv.h | 11 +++++------
config/examples/Malyan/M200/Configuration_adv.h | 11 +++++------
.../Micromake/C1/enhanced/Configuration_adv.h | 11 +++++------
config/examples/Mks/Robin/Configuration_adv.h | 11 +++++------
config/examples/Mks/Sbase/Configuration_adv.h | 11 +++++------
config/examples/RapideLite/RL200/Configuration_adv.h | 11 +++++------
config/examples/RigidBot/Configuration_adv.h | 11 +++++------
config/examples/SCARA/Configuration_adv.h | 11 +++++------
.../STM32/Black_STM32F407VET6/Configuration_adv.h | 11 +++++------
config/examples/Sanguinololu/Configuration_adv.h | 11 +++++------
config/examples/TheBorg/Configuration_adv.h | 11 +++++------
config/examples/TinyBoy2/Configuration_adv.h | 11 +++++------
config/examples/Tronxy/X3A/Configuration_adv.h | 11 +++++------
config/examples/Tronxy/X5S-2E/Configuration_adv.h | 11 +++++------
.../examples/UltiMachine/Archim1/Configuration_adv.h | 11 +++++------
.../examples/UltiMachine/Archim2/Configuration_adv.h | 11 +++++------
config/examples/VORONDesign/Configuration_adv.h | 11 +++++------
config/examples/Velleman/K8200/Configuration_adv.h | 11 +++++------
config/examples/Velleman/K8400/Configuration_adv.h | 11 +++++------
config/examples/WASP/PowerWASP/Configuration_adv.h | 11 +++++------
.../examples/Wanhao/Duplicator 6/Configuration_adv.h | 11 +++++------
.../delta/Anycubic/Kossel/Configuration_adv.h | 8 +++++---
.../delta/FLSUN/auto_calibrate/Configuration_adv.h | 8 +++++---
.../examples/delta/FLSUN/kossel/Configuration_adv.h | 8 +++++---
.../delta/FLSUN/kossel_mini/Configuration_adv.h | 8 +++++---
.../delta/Geeetech/Rostock 301/Configuration_adv.h | 8 +++++---
config/examples/delta/MKS/SBASE/Configuration_adv.h | 8 +++++---
.../delta/Tevo Little Monster/Configuration_adv.h | 8 +++++---
config/examples/delta/generic/Configuration_adv.h | 8 +++++---
config/examples/delta/kossel_mini/Configuration_adv.h | 8 +++++---
config/examples/delta/kossel_xl/Configuration_adv.h | 8 +++++---
config/examples/gCreate/gMax1.5+/Configuration_adv.h | 11 +++++------
config/examples/makibox/Configuration_adv.h | 11 +++++------
config/examples/tvrrug/Round2/Configuration_adv.h | 11 +++++------
config/examples/wt150/Configuration_adv.h | 11 +++++------
80 files changed, 400 insertions(+), 450 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 001c489b0e..75feb74fcc 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 0aeb9d7bc6..8eaa9d2621 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 5a387b3bab..a08b81bd7b 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 7f63b0664e..ee047657ee 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 022d74b881..67fc0d7f7f 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 8ef2b8aebd..48b7d60148 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 8ef2b8aebd..48b7d60148 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 7d95faeeb2..e3506563a5 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 094c246484..4af989d621 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 6bb50a7adb..2b561075c3 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index f692bfe94c..f0d3f6a4d4 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index ed9a3717e8..2139ad2eda 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 018dbd8501..43ff189356 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -646,12 +646,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b713fae1ab..5d56a069ff 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 44600b3223..a7e35750fa 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 37bbcf4c98..8c5ce1197b 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 505ffe1194..977d44f98b 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 37bbcf4c98..8c5ce1197b 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index c07cbf275b..f214483c00 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index e60caac4b7..1c9ffbe89e 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index cbae8fdca9..28f7e846de 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index b12adcf0e3..ba86d6cda4 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index cc9450f1eb..e3d62adcf6 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 8f07338e2a..4394b87a2f 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 206c19367e..676731e558 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 0} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 0 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 4d9b11ef4e..cfce63e1b8 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 2*60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 5a6c5de640..b3726ed45d 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 7f105968d6..8004f90993 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 5a901a5456..57af2cb85e 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 2*60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 04f852045b..e7c6628010 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 34f3f8d786..fa442a2a9d 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 032453f83d..f1d4b23240 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index a93d4344cb..94d5d01d50 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index d87d0f931a..dfa38b346e 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index bb493ed87f..33926e0f67 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -646,12 +646,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index c73a1965bc..72e9470535 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -646,12 +646,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index a5e4f7f2d6..f6d58ad7d6 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 3aad3425f0..fb4adacbbf 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index cc0e84a192..7272929c1e 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index cedc32050c..eee27b5269 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index f8cf281897..1da227c579 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index f8cf281897..1da227c579 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 4eb1b60f07..ed999aa442 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index d006fd2e31..5cdd68190d 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {80*60, 80*60, 12*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 80*60, 80*60, 12*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 2084db7654..452bdd2194 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 2c5d654a3e..4e53372d65 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 1e1dcd467c..8b6620cf6e 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 15b9fe421c..e171234ec2 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index a192a0403c..d4d1c1b4db 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 0e2b37d6e7..9fa8599cf0 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 0dd2cf0378..62f67bf4d4 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 442c6621b9..897bab9290 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 6f2118cdc7..06a92bae5f 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 3343a9693c..3a34babc03 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index bfcea341ca..c03420692d 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 34bed41feb..971abbc022 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 3ff072b453..5bda91343c 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 617dc27c8e..ec19076325 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 5087f94dfb..2ec474a884 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 3209a539cf..666ee419ac 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 0f3e454f5f..6a9f880154 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 2666021281..fe2c87b14e 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 1e684f0642..b011155c8f 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -655,12 +655,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index d6f300574b..892f372072 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index e9aa90468c..f5abd3d22a 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 17bbf4a530..006d34b46f 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {70*60, 70*60, 15*60, 6*60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 70*60, 70*60, 15*60, 6*60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index f60c9e66ac..2e40779469 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 36dc5502ff..71ba2e9e39 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 36dc5502ff..71ba2e9e39 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 91d5961500..e4bbdeedf6 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 91d5961500..e4bbdeedf6 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 558a41efc0..ac0223470f 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 5604e281b5..9dad3e393c 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 91d5961500..e4bbdeedf6 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 242e29b63e..72b6b8b993 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index cf397f07a8..12a2d1913e 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 96f19d7d7c..eeacf34c1b 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 02a97ff9cf..1006f15526 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 322c498261..0b28c5faf3 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index af6bcaf7d0..edf7127228 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
--
GitLab