diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 001c489b0ecb105f4f9152b43faa7f6d184c9207..75feb74fccea93efd7214adfed87f2fbc09d773c 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 0aeb9d7bc658e2dc86bcbc75dc709797d17aa2ba..8eaa9d26215394f0a87269ca329a0aa7b41a7e5b 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 5a387b3bab2d03953524c7718f5a5aea38d1b958..a08b81bd7b8adc188bdab339f6a96671f070c449 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 7f63b0664e47f5f33fa983b8b6ede8272b555133..ee047657eee238e96053fa804272e883a5b502bf 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 022d74b88104ab4b4df00ab72a25603cd057b12e..67fc0d7f7f28c13452e9ad67d4a3a8f99434ee57 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 8ef2b8aebd9368c2bba4da80b61b04c19e6d9235..48b7d601484e5771a660f106e98529e1bbaad15e 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 8ef2b8aebd9368c2bba4da80b61b04c19e6d9235..48b7d601484e5771a660f106e98529e1bbaad15e 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 7d95faeeb2963810c27ac4efab2a63c548003a62..e3506563a5bd1e5acd0264a3e77a25a50e63c081 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 094c24648467552fd17ca9caeb57876ac8e588b8..4af989d621c722ba57cc7549ee517ae88eeaafb6 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 6bb50a7adb4d4e322f9236e4bb7723f83119726b..2b561075c33cfee31fea664f9ea57e42d3bee5ae 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index f692bfe94cb3c0aeb61c4a93ec32a73fbee8a373..f0d3f6a4d4f966681f9113bc198445781e7e0d1a 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index ed9a3717e85ca0a2ec4eb01784b333d3c5ae3679..2139ad2edae00e5868c4ad5e7e88fe947a2ca40b 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 018dbd8501bbe83e47b1a1a30ce08adddfda7f34..43ff189356d331cc3c56c817f2712273c5c347c0 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -646,12 +646,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b713fae1ab3277d9cf91e29877201034a692995f..5d56a069ff398c40573d211d935f35c8669cc9c4 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 44600b3223963b0a239d6634390aead9727bfe4d..a7e35750fac09889de63da23dfb289fa02e4f32a 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 37bbcf4c98cdba953c52f6c144834d17870e6de4..8c5ce1197b3071ee36eda4d5bac0138eeedd3754 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 505ffe1194d21fca740bf6ed30fd7f9410c4c66a..977d44f98b951109006b17f6ca0a6de1ea682230 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 37bbcf4c98cdba953c52f6c144834d17870e6de4..8c5ce1197b3071ee36eda4d5bac0138eeedd3754 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index c07cbf275b1694de1fdfc7f5724552a8be55456a..f214483c0066012adaa810e9109673941fbed674 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index e60caac4b7fa865b8b7685d81f50d9e0373cb836..1c9ffbe89ed5731a614b544dc0040e8412e2ab51 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index cbae8fdca9754db2efb6d314bdae4dac3a7fc272..28f7e846de58a8665412e44f40a26df750429143 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index b12adcf0e30cc65775115b05b8195b9c2d7bc621..ba86d6cda476a61c87fc7f819f27754631357b2c 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index cc9450f1ebf4a4f16247a82ac79115a9c5f27851..e3d62adcf6b7b5ba019960b3d9f32b5948f098ef 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 8f07338e2a0fe492affbbb3d7ddf83933d813afc..4394b87a2f02037e97b76956228a1ea79f334fd4 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 206c19367e55bcc5809b27d72d1e464be96e536f..676731e558e3f85c2ba067368ee7b9b3c64c7e88 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 0} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 0 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index 4d9b11ef4ebe25ce7b8d25e99e0126f76d1bdc99..cfce63e1b8f6c123e6a5dd8f04614f69a15c06af 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 2*60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 5a6c5de640cdd15ce62c7255995a5c36c2a3846a..b3726ed45d464f170f8c1305ba1ce3f4738daf2d 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 7f105968d6e2134ca03df2516f961be10843d575..8004f9099352cdb023771217195e6f27d878ef6c 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 5a901a54564742393b86cd9e030309090cfaeb12..57af2cb85e6b9c43de2ce0c88305a8e510ec2c00 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 2*60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 04f852045b2b88c577c2a951efc68a89bbfe71d0..e7c6628010ca2ae65d9cf71f20d8b8239faa8bba 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 34f3f8d78618baad1e62b5b84421d9a0dcdb79c6..fa442a2a9d601fa5b96b32ac84b738bd04f3a74d 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 032453f83dcdda77ec11ba084f114ee0bb1be9ae..f1d4b2324096f3c668bc01cf7ff3b2b015b13194 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index a93d4344cb902f9db2dc3942f909a0ccada11f83..94d5d01d503e918d302dad16da7f29fac5ec0008 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index d87d0f931ad6ce5dd63aa0a721e06f920d827fb8..dfa38b346ea35863b2243144ded5e17a501331c1 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index bb493ed87f54a40be591efa28f2aa4393f68e4d2..33926e0f67d5e1e9a4276b1c4664b9080e21a76d 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -646,12 +646,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index c73a1965bc24e7e6b51211e16c49235a75e96721..72e947053511a154de35e41b9bf9004ba0611625 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -646,12 +646,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index a5e4f7f2d6e8c150393e855a91efb9eb8c71a362..f6d58ad7d64ffc722b1d4ef7962f02765bace1c6 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 3aad3425f0ce3336e50c7ad89161da27f79bb770..fb4adacbbf580ba8cc4c8a37a1860c1fe51fe02e 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index cc0e84a1927665b09f400ac5b998872bc5098d07..7272929c1ec9072b046729940978467d24d719ff 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index cedc32050c511e039e808acf571dc842948bd748..eee27b52692400c6a9895a448858a6c62e783987 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index f8cf2818974b574d625d2c7111c80a62b86697b2..1da227c579d01c25a03757df0fccb085e5400bc8 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index f8cf2818974b574d625d2c7111c80a62b86697b2..1da227c579d01c25a03757df0fccb085e5400bc8 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 4eb1b60f0717290835614ce807898024b4f30f96..ed999aa442f5874b697fca2415d5316301191eef 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index d006fd2e3135c844849aba49d2bb95d199c98b5f..5cdd68190d58c1ae627c4f53404273222f8df111 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {80*60, 80*60, 12*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 80*60, 80*60, 12*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 2084db76547db0a88c7945873ab26b0b37d1811d..452bdd21943b46765c373c92d3fd1328724a62aa 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 2c5d654a3e40f2094a2f1fb070276dc8e62a1760..4e53372d651dd802d3d7ff9615f350f914d4dd01 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 1e1dcd467c066b35321b6e685deb5684ef6735a7..8b6620cf6ea40b5a96329b00b4c0cc8156e2283a 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 15b9fe421c8849d79419084a4ef4792c0af4ac1c..e171234ec24182c876ab63ec0c0d2670b520b520 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index a192a0403ca49f285e39e702091b44c3ec3f7766..d4d1c1b4dbe9166d5d96fbf0791f6e670303ed04 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 0e2b37d6e7709c66096bdabb46ac9f32ea7eb66a..9fa8599cf0fdfcf9a367f641ab4933f2df381dd7 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 0dd2cf03784f575b95724faf92b85050277b45f7..62f67bf4d430be1b0a3bd47915adf03f5adabd20 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 442c6621b9594fe732f4b647b361c67623be5431..897bab92909d7d9349c098df57692316fde88b96 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 6f2118cdc7335748b295dd21acf7aceb57e14fd6..06a92bae5f7b733cb21a9c932f466bc54d3c1913 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 3343a9693c2ece74819cdcafad2752d21f62f257..3a34babc037b28dcaffe4e8c35043e377293e68f 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index bfcea341ca170f3ff847cc24614d3b32a8265d43..c03420692dbc0ca856e90ac2e5e5498f4e3a4011 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 34bed41feb48197f8800bc0ba14107456cd8ec95..971abbc0224eb95ceadf454e3fec246a267aaa28 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 3ff072b453e86622a45a84298714456b6dba8427..5bda91343c8e2f54df2edf1404e851fa59d56468 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 617dc27c8e90832a73fcab59df461ed47dacb789..ec19076325726cdd1501a236fbaa9f86ee311820 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 5087f94dfb0f9f18efa7de20bfaf90ed3e444532..2ec474a8844055bd7ff5a5e666a77fe51071c8dd 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 3209a539cfda67d3c9f40c53131d409fb363d25e..666ee419ac653db2d0146a1d9e0e5c92ca157265 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 0f3e454f5f3c4a1305d547061ecb1653f44fd665..6a9f880154ab97fcce831ff19ebf9020063177d6 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 2666021281264d63bfe6ba22333594d00079885c..fe2c87b14e88a72970b7ed6433fdf40977fc4628 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 1e684f064221f0f92fa811eba131b60f175886af..b011155c8ffbe0d4e461d0188194df5dd9e18c74 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -655,12 +655,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index d6f300574b080af6d81fd032f70730ae8f61949e..892f3720727ec1cd07028b87aa50529058e83b33 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index e9aa90468c8f83c4cc2c72c22de3f8b3b81726d9..f5abd3d22a6f89248d736d12b4efaee58756389d 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 17bbf4a5308f24f19bd6d452e1c165714486d66d..006d34b46f9764f4fd638d4f84f61197ab819ca3 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {70*60, 70*60, 15*60, 6*60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 70*60, 70*60, 15*60, 6*60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index f60c9e66ac5d99732271478642d5581437d62283..2e4077946991209b103178a75fd209191741e7ab 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 36dc5502ffcdce2aa1bf2a39ead5bd5d1a24fd1e..71ba2e9e39cd7fc7f8402a8ab4a6a9022f30a01c 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 36dc5502ffcdce2aa1bf2a39ead5bd5d1a24fd1e..71ba2e9e39cd7fc7f8402a8ab4a6a9022f30a01c 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 91d596150056e1224ce40b02d45325fbbc72bb60..e4bbdeedf615a2461de49357b101be89509fc9d6 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 91d596150056e1224ce40b02d45325fbbc72bb60..e4bbdeedf615a2461de49357b101be89509fc9d6 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 558a41efc065ce40f58a15ed0bf36c0aee88bad2..ac0223470f179c8dc3051db715c7c8aa6e98765f 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 5604e281b5d53674c34925d2a6c1057359fda479..9dad3e393c68854155f6c18f3f098e8654d92798 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 91d596150056e1224ce40b02d45325fbbc72bb60..e4bbdeedf615a2461de49357b101be89509fc9d6 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 242e29b63ef0d3e90dde0583262a79aedae402ec..72b6b8b9936502ff7e77e1e6d004e80e1faff5db 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index cf397f07a83c067235c6a3e766889180df307630..12a2d1913ea74be05b57ee5be5f03c1218d16c17 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -641,11 +641,13 @@
// @section lcd
-#if ENABLED(ULTIPANEL)
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE_XYZ 50*60
#define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 96f19d7d7cd91aa90956492c9b68eebbfdc34a93..eeacf34c1b59108f10d8e8d012bbfb0e3b7a5617 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 02a97ff9cf8860b1f73afc8a91032bd3d5dbd151..1006f155267b79dcfc438f2511f7302089a63145 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 322c4982615c2870390706150f4aa1c24693e50f..0b28c5faf3bca393af1633c1154ed48f695a6c9b 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index af6bcaf7d0f0505db589581f09033ea844dba336..edf7127228b245d33eb49311f3e6b64ae49d7d5a 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -642,12 +642,11 @@
// @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
- #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
-#endif
-
-#if ENABLED(ULTIPANEL)
- #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
- #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+ #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+ #if ENABLED(ULTIPANEL)
+ #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+ #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
+ #endif
#endif
// @section extras