diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h
index 0409d6bd2dec59ca383324a9342f2cf959322fbb..1e8d5ddb56979db535c537d38f7b172d645dd1f9 100644
--- a/Marlin/pins_AZTEEG_X3.h
+++ b/Marlin/pins_AZTEEG_X3.h
@@ -8,24 +8,24 @@
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
- #define BEEPER_PIN 33
+ #define BEEPER_PIN 33
// Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 31
- #define DOGLCD_CS 32
- #define LCD_SCREEN_ROT_180
-
- //The encoder and click button
- #define BTN_EN1 22
- #define BTN_EN2 7
- #define BTN_ENC 12 //the click switch
-
- #define SDSS 53
- #define SDCARDDETECT -1 // Pin 49 if using display sd interface
-
+ #define DOGLCD_A0 31
+ #define DOGLCD_CS 32
+ #define LCD_SCREEN_ROT_180
+
+ //The encoder and click button
+ #define BTN_EN1 22
+ #define BTN_EN2 7
+ #define BTN_ENC 12 //the click switch
+
+ #define SDSS 53
+ #define SDCARDDETECT -1 // Pin 49 if using display sd interface
+
#if ENABLED(TEMP_STAT_LEDS)
- #define STAT_LED_RED 64
- #define STAT_LED_BLUE 63
+ #define STAT_LED_RED 64
+ #define STAT_LED_BLUE 63
#endif
#elif ENABLED(TEMP_STAT_LEDS)
diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h
index efdac8faf7d5518c3e8e49bf79e0795706478c27..8e12cf2a7adbd315d93ae79baf8509091c3d01ed 100644
--- a/Marlin/pins_MINIRAMBO.h
+++ b/Marlin/pins_MINIRAMBO.h
@@ -3,10 +3,10 @@
*/
#ifndef __AVR_ATmega2560__
-#error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
+ #error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
#endif
-#define LARGE_FLASH true
+#define LARGE_FLASH true
#undef X_MS1_PIN
@@ -20,94 +20,94 @@
#undef E1_MS1_PIN
#undef E1_MS2_PIN
-#define X_STEP_PIN 37
-#define X_DIR_PIN 48
-#define X_MIN_PIN 12
-#define X_MAX_PIN 30
-#define X_ENABLE_PIN 29
-#define X_MS1_PIN 40
-#define X_MS2_PIN 41
-
-#define Y_STEP_PIN 36
-#define Y_DIR_PIN 49
-#define Y_MIN_PIN 11
-#define Y_MAX_PIN 24
-#define Y_ENABLE_PIN 28
-#define Y_MS1_PIN 69
-#define Y_MS2_PIN 39
-
-#define Z_STEP_PIN 35
-#define Z_DIR_PIN 47
-#define Z_MIN_PIN 10
-#define Z_MAX_PIN 23
-#define Z_ENABLE_PIN 27
-#define Z_MS1_PIN 68
-#define Z_MS2_PIN 67
-
-#define HEATER_BED_PIN 4
-#define TEMP_BED_PIN 2
-
-#define HEATER_0_PIN 3
-#define TEMP_0_PIN 0
-
-#define HEATER_1_PIN 7
-#define TEMP_1_PIN 1
+#define X_STEP_PIN 37
+#define X_DIR_PIN 48
+#define X_MIN_PIN 12
+#define X_MAX_PIN 30
+#define X_ENABLE_PIN 29
+#define X_MS1_PIN 40
+#define X_MS2_PIN 41
+
+#define Y_STEP_PIN 36
+#define Y_DIR_PIN 49
+#define Y_MIN_PIN 11
+#define Y_MAX_PIN 24
+#define Y_ENABLE_PIN 28
+#define Y_MS1_PIN 69
+#define Y_MS2_PIN 39
+
+#define Z_STEP_PIN 35
+#define Z_DIR_PIN 47
+#define Z_MIN_PIN 10
+#define Z_MAX_PIN 23
+#define Z_ENABLE_PIN 27
+#define Z_MS1_PIN 68
+#define Z_MS2_PIN 67
+
+#define HEATER_BED_PIN 4
+#define TEMP_BED_PIN 2
+
+#define HEATER_0_PIN 3
+#define TEMP_0_PIN 0
+
+#define HEATER_1_PIN 7
+#define TEMP_1_PIN 1
#if ENABLED(BARICUDA)
- #define HEATER_2_PIN 6
+ #define HEATER_2_PIN 6
#else
- #define HEATER_2_PIN -1
+ #define HEATER_2_PIN -1
#endif
-#define TEMP_2_PIN -1
+#define TEMP_2_PIN -1
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
-#define E0_MS1_PIN 65
-#define E0_MS2_PIN 66
+#define E0_MS1_PIN 65
+#define E0_MS2_PIN 66
#define E1_STEP_PIN -1
#define E1_DIR_PIN -1
#define E1_ENABLE_PIN -1
-#define E1_MS1_PIN -1
-#define E1_MS2_PIN -1
+#define E1_MS1_PIN -1
+#define E1_MS2_PIN -1
#define MOTOR_CURRENT_PWM_XY_PIN 46
-#define MOTOR_CURRENT_PWM_Z_PIN 45
-#define MOTOR_CURRENT_PWM_E_PIN 44
+#define MOTOR_CURRENT_PWM_Z_PIN 45
+#define MOTOR_CURRENT_PWM_E_PIN 44
//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#define MOTOR_CURRENT_PWM_RANGE 2000
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
-#define SDPOWER -1
-#define SDSS 53
-#define LED_PIN 13
-#define FAN_PIN 8
-#define FAN_1_PIN 6
-#define PS_ON_PIN -1
-#define KILL_PIN -1 //80 with Smart Controller LCD
-#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
+#define SDPOWER -1
+#define SDSS 53
+#define LED_PIN 13
+#define FAN_PIN 8
+#define FAN_1_PIN 6
+#define PS_ON_PIN -1
+#define KILL_PIN -1 // 80 with Smart Controller LCD
+#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD)
- #define KILL_PIN 32
+ #define KILL_PIN 32
#if ENABLED(NEWPANEL)
- #define BEEPER_PIN 84 // Beeper on AUX-4
- #define LCD_PINS_RS 82
+ #define BEEPER_PIN 84 // Beeper on AUX-4
+ #define LCD_PINS_RS 82
#define LCD_PINS_ENABLE 18
- #define LCD_PINS_D4 19
- #define LCD_PINS_D5 70
- #define LCD_PINS_D6 85
- #define LCD_PINS_D7 71
+ #define LCD_PINS_D4 19
+ #define LCD_PINS_D5 70
+ #define LCD_PINS_D6 85
+ #define LCD_PINS_D7 71
//buttons are directly attached using AUX-2
- #define BTN_EN1 14
- #define BTN_EN2 72
- #define BTN_ENC 9 //the click
+ #define BTN_EN1 14
+ #define BTN_EN2 72
+ #define BTN_ENC 9 // the click
- #define SDCARDDETECT 15
+ #define SDCARDDETECT 15
#endif //NEWPANEL
#endif //ULTRA_LCD
diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h
index f0ed90c3752dbf284be3cf7626214c0ee4dcbde0..9d0ff9e3f524628a3dfe898b9e431a04405fdcb0 100644
--- a/Marlin/pins_TEENSYLU.h
+++ b/Marlin/pins_TEENSYLU.h
@@ -69,16 +69,16 @@
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
- #define BEEPER_PIN -1
+ #define BEEPER_PIN -1
#if ENABLED(LCD_I2C_PANELOLU2)
- #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
- #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26
- #define BTN_ENC 43 //A3 - fastio.h pin mapping 43
- #define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping)
+ #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
+ #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26
+ #define BTN_ENC 43 //A3 - fastio.h pin mapping 43
+ #define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping)
#endif // LCD_I2C_PANELOLU2
- #define SDCARDDETECT -1
+ #define SDCARDDETECT -1
#endif // ULTRA_LCD && NEWPANEL