diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index df435b970d62cae4903d0b7dfd29bbd0b5e702f4..b28387740a3f665d42f40a7d19f2af6f23ffee87 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/Marlin/src/core/utility.cpp b/Marlin/src/core/utility.cpp
index 4f2cb810793bbb23850663923f230fdc7778c7ac..b224891cad31ecfb3090c70464e406ffc3993d6c 100644
--- a/Marlin/src/core/utility.cpp
+++ b/Marlin/src/core/utility.cpp
@@ -66,6 +66,8 @@ void safe_delay(millis_t ms) {
"BLTOUCH"
#elif HAS_Z_SERVO_PROBE
"SERVO PROBE"
+ #elif ENABLED(TOUCH_MI_PROBE)
+ "TOUCH_MI_PROBE"
#elif ENABLED(Z_PROBE_SLED)
"Z_PROBE_SLED"
#elif ENABLED(Z_PROBE_ALLEN_KEY)
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 69b73a9194141b63b1bc9515aa63ab658ab16382..c876ea46566c3c728f3abb8d7d3d261d1f863583 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -502,7 +502,7 @@
/**
* Set flags for enabled probes
*/
-#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
+#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
#define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
#if HAS_BED_PROBE
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index c237c3226b7321be1e2b2d334542954743d11c24..db7623f74e003b8635f72c56a36534663ed692dc 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -985,11 +985,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
+ ENABLED(FIX_MOUNTED_PROBE) \
+ (HAS_Z_SERVO_PROBE && DISABLED(BLTOUCH)) \
+ ENABLED(BLTOUCH) \
+ + ENABLED(TOUCH_MI_PROBE) \
+ ENABLED(SOLENOID_PROBE) \
+ ENABLED(Z_PROBE_ALLEN_KEY) \
+ ENABLED(Z_PROBE_SLED) \
+ ENABLED(RACK_AND_PINION_PROBE)
- #error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
+ #error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, TOUCH_MI_PROBE, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
#endif
#if HAS_BED_PROBE
@@ -1046,6 +1047,25 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
#endif
+ /**
+ * Touch-MI probe requirements
+ */
+ #if ENABLED(TOUCH_MI_PROBE)
+ #if ENABLED(Z_SAFE_HOMING)
+ #error "TOUCH_MI_PROBE requires Z_SAFE_HOMING."
+ #elif ENABLED(TOUCH_MI_RETRACT_Z)
+ #error "TOUCH_MI_PROBE requires TOUCH_MI_RETRACT_Z."
+ #elif defined(Z_AFTER_PROBING)
+ #error "TOUCH_MI_PROBE requires Z_AFTER_PROBING to be disabled."
+ #elif Z_HOMING_HEIGHT < 10
+ #error "TOUCH_MI_PROBE requires Z_HOMING_HEIGHT >= 10."
+ #elif Z_MIN_PROBE_ENDSTOP_INVERTING
+ #error "TOUCH_MI_PROBE requires Z_MIN_PROBE_ENDSTOP_INVERTING to be set to false."
+ #elif DISABLED(BABYSTEP_ZPROBE_OFFSET)
+ #error "TOUCH_MI_PROBE requires BABYSTEPPING with BABYSTEP_ZPROBE_OFFSET."
+ #endif
+ #endif
+
/**
* Require pin options and pins to be defined
*/
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index df168f053d09602591a9a3732e943959430ec643..5662c4c72c8d08e2aac7e69556306ee6ecf59bf2 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -103,6 +103,26 @@ float zprobe_zoffset; // Initialized by settings.load()
#endif
}
+#elif ENABLED(TOUCH_MI_PROBE)
+
+ // Move to the magnet to unlock the probe
+ void run_deploy_moves_script() {
+ #ifndef TOUCH_MI_DEPLOY_XPOS
+ #define TOUCH_MI_DEPLOY_XPOS 0
+ #elif X_HOME_DIR > 0 && TOUCH_MI_DEPLOY_XPOS > X_MAX_BED
+ TemporaryGlobalEndstopsState unlock_x(false);
+ #endif
+ do_blocking_move_to_x(TOUCH_MI_DEPLOY_XPOS);
+ }
+
+ // Move down to the bed to stow the probe
+ void run_stow_moves_script() {
+ const float old_pos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] };
+ endstops.enable_z_probe(false);
+ do_blocking_move_to_z(TOUCH_MI_RETRACT_Z, MMM_TO_MMS(HOMING_FEEDRATE_Z));
+ do_blocking_move_to(old_pos, MMM_TO_MMS(HOMING_FEEDRATE_Z));
+ }
+
#elif ENABLED(Z_PROBE_ALLEN_KEY)
void run_deploy_moves_script() {
@@ -366,7 +386,7 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
if (deploy) bltouch.deploy(); else bltouch.stow();
#endif
- #elif ENABLED(Z_PROBE_ALLEN_KEY)
+ #elif EITHER(TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY)
deploy ? run_deploy_moves_script() : run_stow_moves_script();
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index df435b970d62cae4903d0b7dfd29bbd0b5e702f4..b28387740a3f665d42f40a7d19f2af6f23ffee87 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 3af58dea1ab6c7fd97b47f04b38980c4e981fda9..4c16348f676d1c11e493b416db1600793a421941 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -835,6 +835,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 0d83bc6fa0a869e41aae84c4746a01c073332caa..229e129098e2400cba3cdd992777365b0cd82a7d 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -849,6 +849,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 5a176a46a245ba022cbe3b148300bc6d66d2608c..ff4362621482639539113b6bd8bb0b4673352f3f 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index dd8b032909e483e494926591c0ef02cc3fef473d..432e28e43262856d54ccb033798eb3a87f974783 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -840,6 +840,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index d0f906a658b6d3de8836cc7869313540332889b5..091bc1f2d82be42a524ed82df6076a83902d975c 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 5f7ba36a8241d7c3d6c8e5c8dc0fa2a485f7fbcb..9d6ad44ab683a11d74b344da3d24db68c98dbbb9 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 9f84b89cb7751a46c4440c01d3bf86a22dfb37d1..825a67c6f6232443470c301fae5395bcf4dcf378 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -876,6 +876,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index df687c95f09eb1f6d62046f8b13088eb5dfa1eaa..f1a65678aad12a7df787841f8c684940a72f54f9 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -842,6 +842,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 5ad6b5d60e9caaa79d5d1375ecf58625d9a9ee7e..09986c472f63bdbf2b2cdff89ae082e3fbd82ae5 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -840,6 +840,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 90fa55db1927928b0d3e2fbe88c4b785d812f8e3..9e512bcbe09194c97273de56b64aab85f5fe402a 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -841,6 +841,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index 1d91086baf65ba086efaf95bdc8e9d5f2ab619b4..98832db255a03cf877053592cb1c6e81de4d6759 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -839,6 +839,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 745eef0e61bb09f6ba4a3f9d44e07050f73ecd72..8c7358750bc4f6fb33c9c190465d44ed555c7b18 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -830,6 +830,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 6319a44a52d948ce31223f88258990110e5bbc79..ce2ceda851f3df594fada6f2fd36c7285bfa3177 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 53bd514bc7ddea187cfdfd76a549c4bcfa4dd8da..545770cbd1379274e86c88b977ced11bab1093a4 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 4f84b61991a7d57835f44467ef8b00b84bb80666..c251a88499d29c7779792e1ef21c87e3527b7fb3 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 7044c4f3c05332f9e7de6d9c3cb3c75ce5e9cf1b..100aa8856af484706937a258e6de83863b75ac91 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -817,6 +817,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index a90e9bde5eb9bd1cc218f58001546ec5abb0cb7e..30102a66753b33712fb8c4c4d5b60d18bdf67e37 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -830,6 +830,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 80f2f675b98b28240257346a3eb94e2422e5dfec..bc595eca5446abb8d7dede83f9b2876074749a7f 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -817,6 +817,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index f07dbd777cdea09e13b1f5a1174b122a008f4310..b8ccfe60ca11a5e7b87f523531d510da8d220630 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -828,6 +828,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index c1131af1984670ceae67a163d4c0bfeb84b6d56b..78e77d1d5ac941f0f657029a9a3ea9a164fc2a87 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -839,6 +839,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 4a9e6ad4a63b8c6c04e61369abb526abdd19e432..1aa8f9e78cfb8725fb0db1421752a4ae21e0aba1 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 58b8c9388772b66245142760c84a1b11270c3319..27e977cbc1b36fdf47fc57f7f7929c95304a1e9b 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -830,6 +830,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index fe2a11c799f715f9e1aa13d8420a3eabadd30ff8..b2e0a95d66d894f484ebb3b6ce5923b571e74d6d 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -848,6 +848,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index a857ba8cffa9dd35cae2d96fe782316c3d186694..e1e62ac3b60db377aa7a597347acaaeeae189b76 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -839,6 +839,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 858e7acdda203a586d5ca0d6b4921036a6c87e0e..c437b2686e8d40d5eca6ba0b5f5bfe82408eafda 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -833,6 +833,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 619b15d7dff9edb96c150c1faa3dffc74fb1d715..f3e3e02f25a4422942f09be999464e41f1b7b959 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -833,6 +833,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 4563046fce5010234dbdecad1907580d78919abd..3b35f0c9d7e7f6c0860526dd9fd19e73425a000f 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -839,6 +839,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index 0116a5b955f6b361b92cf97ef093ddd18c7889d9..971cd10c7b2fdf999fe0b5710b269f627b830a83 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index 589d25d52003294d8cbf9974aad88e2e3e0ad8d7..0d9b31e120b5700cc2cb9f175e5b141a49ac8616 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -834,6 +834,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index 20b8de96660f628c8834388dda54cabb8bfe32ea..5ae414e6ca8586faea8a43a2a60a0066e574edcb 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -838,6 +838,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index c5e2281ee10c4dadd95344de988ffb1d35236f92..c22e212fb171a41cb7ba52208aafd25ca82860dc 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -811,6 +811,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index b53442d1f802f513c45274c41b5db91c8a5d7d35..cd000e54ce7bb4ba74c0a27470ffe0da5e6e46b4 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -811,6 +811,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index 48c50608d163658b5a0d89effc21cf2ada54780d..38c41baad21f32ed6aabf7cb2d374246cc9007b8 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -821,6 +821,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 393f537519c3266b3a07eb7588d52eac5e0f77ff..14a7ac3873b1cc3409e3dc73bca7ac5bdefe1709 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -835,6 +835,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 2a14aa057a530835fe696531ddd8a8dfe9a59ff3..560fa923f13d919cd448088ba8591d7e7a88c540 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -912,6 +912,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index bd7b0c71d5b5c286f558461d69531a3bfe6b8c2f..9e0b47e565cdd8308fdb455c599e6cb4bd148c75 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -858,6 +858,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 6e23032a667113d713b7a2a0aef64f6deb3b58e3..8d62607cd8139242e422a9073eda65c834ffd4d4 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -845,6 +845,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 14743ea17edd745d43ea4b05cafffb2c92eaa835..8934672b5fbb52692b85517e7a63e1e03493e02d 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -812,6 +812,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 2bd10d91c7f8428887f2a8814311137fd6811c6b..71fcc7be6aafcc1657e9a85fd99d0246556727f5 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -812,6 +812,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 9813957f05522e82e89fe633b29f57b3cb5b00eb..8bb9617269867047cdf716b86870ccde439366cc 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -812,6 +812,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 973bbc145bf1ffccae1bda094da628ede03b4863..c946708ab8a30be5031ecbe384f01794dd5eb57f 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -844,6 +844,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 111a37527e621bf3111f7031f56df371d4a89848..1e52b492f916ed53bea8942b13fcb8a4ba14e3dd 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 47f355c89e5556c1db46432fbbd9417613ad1e86..35da347958591ad2528f21bada062ef187eeb840 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -836,6 +836,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 159aea681a652e18679ac117cf89d0cdfa7c2db5..6d119fa17cc58b16cbb448f7d6fd3c96a9face7b 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -849,6 +849,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 110687f3eec1c5e333b2565c5924959388955ab1..4b936d5370c35d2789bf8627826efc9d64de3f6a 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -849,6 +849,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 6e105a185910506c40542e0b908f89bbab1b906c..8eafa049dc1859aebfc63b98f4e3eca04e52aa1e 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 37f0dd81d9c0b7ff8e568cece877b5971b9a6428..9f630aab4a6c83d3f17267ee13649496f7e3a7c1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index a2d002baec87d1c43ecd0d3dc0f8a1dfd53a792d..b639bd1925a51ca15b0258c0c3d524b764bc810e 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -833,6 +833,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 84286b7ee779897edeaae92af3cd51e3fe60493d..d14ec97482e9906c7806ced66879756b028f0ee9 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -841,6 +841,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 8c0672b889afcfb7f760d12f5479d50e94d71be6..ff89e3b2cfdee5e873f69ad2c5485517883cba97 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -849,6 +849,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 3c48103428bfcb7056135f34abb26293e2ed14be..17190eaa8241f4b7c53fa812c3dc47f8768f7414 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -849,6 +849,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 4f1db1c15a18fbb33d05c6be82c29e2675dc6215..99b071ba76398667a938c013051e543b971f370e 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -828,6 +828,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index dea50b5504027dacb118bbe54698134f2529d414..5cd6989639a320e12aa2d002b4d29ce99fa2eb55 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -833,6 +833,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 3d11f711ef8746e2326fcdbfd14ae9bf4df806cf..185f254a4806f47fadfd90510e283eb517ead1e1 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -833,6 +833,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 0ebf3fb8aaad104b04dcb0e454d0a0cd2005246c..c869baa8c7719dac86286cfb244c62fbdb642763 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -830,6 +830,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index db5fc297b96853eafa7e091ea8ff4cca2c4c3abb..80c4d528307e2b2d43316e5abeabb1aa07616199 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index ae5dd7d1df13d2b5d63087fdfab7cba3dd8084a8..693c577b192cf3bb8e0053d3de3826371c8ae448 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -837,6 +837,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index f57848c2777eacd02fbb8b8a0b59589df178b8ee..12b1892d15f53de1d85521da280c1d593cd38a83 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 15d3ed1f81e72b44405d247b7cfe99c018a41dfd..91cdd41e73a9979cef6e1b95a77082eade730eec 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -869,6 +869,22 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 9d83db658e3ace3c71e3454f838728a633971c7a..8c9f112195dc94e7af89ecb713b1a57c093266d1 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 29dce6f9d231a38945da84140ec5dc5713d7b405..a3a6175a0405d388e2870bd062f9da73c1dba726 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -827,6 +827,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 9bc674c28103d8559405cf15bf79b509eaf97971..0a4bb5961af216a46cd91d76871d220a80ecf29e 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -842,6 +842,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index b237ce8b079c29e33ffacc11b4551843bb0157aa..dfb82d2d3f11e112006f51eab86565211b703734 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 03d80f6177c30870dd06edee60ebf3bfd80ede6d..a95ad8581de61dd2bf378cfcab78276a837d1e1d 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -831,6 +831,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index ba63e506f895eea344aa34a64dd52fa39313ea2c..9f8b8e398a4031d43654dbbdb79aa7a02b61f488 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 1a7276a7f1efeabbb955ea8c17820b91c569bdbe..4cda31ff525d6f8c1ddc4e7224dbdb756204904d 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -831,6 +831,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index c87e2c70059794f4251075b17c66bf510731dab8..ab82b5d75761ee806eb99f4e497b9c590353ad3f 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -860,6 +860,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index fd84149ed8a35c9fee869debc8855013ec5c0ed8..afa3df4c288dba39db52f136ea208ee149b8c65c 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 0e2900b32719a280fcf4d14942d04536f24235fe..ce883ce8927f664110e833092313d23a52c23410 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -880,6 +880,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 20bda64b174242a2697120edaeeb23b47b2a3be1..a9ea52f3c3bf4c81b082449dca2bf21f6212f074 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index d939ade6d132a323f41a5c0a254392e6d7053b79..0556e52996a483aa13917941ffd6314391b305d5 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index b94a1810e9c7db6477f756a32c7c5e97cda15cac..bc1cd1c3a9d728aad7fa87ced686d4ecdd062d53 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -850,6 +850,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 3c2b6fb5bfeb19d3ea682352315c84ebe2ef8659..99045676b0eef97f83b91621efaf8616f7ef0a47 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -828,6 +828,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 0cc4f8a6183d270dc0d9e7f492a13d55cbf0fe55..97249c1e072b57e3f1635a1591bad0b9cbeea8ee 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -840,6 +840,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 2b4308954517b0e5af457f0728603f76c3c962b1..c5182d510b1e285e1d13e8db8dea7352c023e8c9 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 557b10fa38950ce8a6b95328830a77b9a5a2b1f8..fc77b8f132f3d3b41bf087e8eb19a6aa596c97df 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 3c4c02821bf2bc60353b259c3191884ca135ee40..87e78fff242c30530c8c07ebb56ea421bd72ad98 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -838,6 +838,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 9db1ccd9c9455e4cff0b07038b2a041a39ee2ea3..f4dc0c7a0281e0c3a521fc506823e85d6328a491 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -858,6 +858,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index ae95f54c2e87b580d6542174b9b8c29dd7aa4ace..9499722fcb2b76757f5cfd27c4002ea7ac1a6ef4 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index f75f207c7237d870540394e699391f4b48728c76..4709bd8ea2fe107767840db3404c405c85cb5db6 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index df74b08b7f4f29fac3e38fb0be8eb7e44d7d942c..6230903a8f0e2cbc7db8a87b3a9209e6de329400 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -848,6 +848,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index fc8b47d54a85c64dedbb056f27f4312b9746f791..5c66a6688b94f8a82722bd656701ab195c9ac27d 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -839,6 +839,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index d054246de43d8ba34ab04753077f9f6fa66a9bc3..c7ceb5d506c50a02d7e14635c5f6efc83087f6bd 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -829,6 +829,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index b9318f52980a89f768a9ed25c245fc81e4309aa3..795f078a3286992d40d8afee56485ed9291745db 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -965,6 +965,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 6d21f025b893bfad1c776d0ae67962a8f80d8720..dd145d6a69cf579977e5829c57060cdd871eedec 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -911,6 +911,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index 0d648a1e996d8e4d08f96722e0b9fb98be5205eb..040749352a47cca8e3321056093bfa5d73cd3142 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -911,6 +911,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index ecd3f24c6eab251b45386d8e2926c584bcad6ed1..4a82bfd35029e29ab0fa132a03bb8954bfbdffa1 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -911,6 +911,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 37d21e6bf4181b357f9cc4eb730e637d5c08e190..8cdda9d1fbcb84f7bc3c0585bcdd80895d57165d 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -901,6 +901,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index f942c3cdc8ab785b2e923c680a2edb924fb5f219..1f8dc206b5a8acd1ef1708f4f5c7a040bda31317 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -916,6 +916,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index f1a065de3be5e5fce518aa9b29693c934f99fd9d..46ba5d6a1f5d34ac203688c7d3d97a40930a3649 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -901,6 +901,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 5b8f22894440da4d11ec1bba6f799ba326f6a456..665e2babdfb405e2dd6a5452a1c8b5bbc4b9c5a6 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -905,6 +905,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index b8151d4c294185d823faf008ac2bf068fd89fd5b..ee345fd9af32c373356627a2f83a6e5df446dd3f 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -901,6 +901,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index 075eecd97327ebb9670161fd066bc19013b7b6b7..38766b7f33ee0f3c139dc14492602778824621da 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -901,6 +901,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 8490c2fd08caa9039eb531b7747dc7fac93696a7..9a95705ba2e213dfebdd36e7057e8c1b9c8e5b68 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -894,6 +894,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index ce240d02b02f04b79e3070abd23a85447f12e1e2..d64901c29009dc6e0292cd00bfd2acd2dc3d87a0 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -904,6 +904,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index a6fc8700f8f591f09bdf784fa68ef139472ce4a0..cf9cdd087975763188d332264bccba5a63025b8c 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -842,6 +842,22 @@
*/
#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 4de7ede07b6ba4e539dc8d69ce0df687af825fda..e22ecbc61ccab39b6bb39e3636573ac0bb8dcca4 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -832,6 +832,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 369bc51d4526b408de5004b2a973598da3ba70b6..ffe88d18c43f7a0b51ceea6d1a28d1e0a3c6ac09 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -824,6 +824,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index f94d34856b1ca07897d2b3858974e6e59803e285..da62bd473c70bb0a0b80bf98298dda8159aa3616 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -834,6 +834,22 @@
*/
//#define BLTOUCH
+/**
+ * Touch-MI Probe by hotends.fr
+ *
+ * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
+ * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
+ * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
+ *
+ * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
+ * MIN_PROBE_EDGE, and a minimum Z_HOMING_HEIGHT of 10.
+ */
+//#define TOUCH_MI_PROBE
+#if ENABLED(TOUCH_MI_PROBE)
+ #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
+ //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
+#endif
+
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE