From eb6dec03bd8d5f6a99b594c933f0934c348f5034 Mon Sep 17 00:00:00 2001
From: Tim Moore <tim@youngmoores.com>
Date: Thu, 4 Jul 2019 23:58:34 -0700
Subject: [PATCH] Simplify power supply naming logic (#14488)
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
---
Marlin/Configuration.h | 23 +++++++--------
Marlin/src/Marlin.h | 4 +--
Marlin/src/gcode/gcode.h | 4 +--
Marlin/src/inc/Conditionals_LCD.h | 2 +-
Marlin/src/inc/Conditionals_post.h | 29 ++++++++++---------
Marlin/src/inc/SanityCheck.h | 15 +++++++++-
Marlin/src/lcd/menu/menu_info.cpp | 8 +----
Marlin/src/pins/pins.h | 2 +-
Marlin/src/pins/pins_MKS_GEN_13.h | 4 +--
buildroot/share/tests/megaatmega2560-tests | 3 +-
config/default/Configuration.h | 23 +++++++--------
.../examples/3DFabXYZ/Migbot/Configuration.h | 23 +++++++--------
.../AlephObjects/TAZ4/Configuration.h | 23 +++++++--------
.../AliExpress/CL-260/Configuration.h | 23 +++++++--------
.../AliExpress/UM2pExt/Configuration.h | 23 +++++++--------
config/examples/Anet/A2/Configuration.h | 23 +++++++--------
config/examples/Anet/A2plus/Configuration.h | 23 +++++++--------
config/examples/Anet/A6/Configuration.h | 23 +++++++--------
config/examples/Anet/A8/Configuration.h | 23 +++++++--------
config/examples/Anet/A8plus/Configuration.h | 23 +++++++--------
config/examples/Anet/E16/Configuration.h | 23 +++++++--------
config/examples/AnyCubic/i3/Configuration.h | 23 +++++++--------
config/examples/ArmEd/Configuration.h | 23 +++++++--------
config/examples/Azteeg/X5GT/Configuration.h | 23 +++++++--------
.../BIBO/TouchX/cyclops/Configuration.h | 23 +++++++--------
.../BIBO/TouchX/default/Configuration.h | 23 +++++++--------
config/examples/BQ/Hephestos/Configuration.h | 23 +++++++--------
.../examples/BQ/Hephestos_2/Configuration.h | 23 +++++++--------
config/examples/BQ/WITBOX/Configuration.h | 23 +++++++--------
config/examples/Cartesio/Configuration.h | 23 +++++++--------
.../examples/Creality/CR-10/Configuration.h | 23 +++++++--------
.../examples/Creality/CR-10S/Configuration.h | 23 +++++++--------
.../Creality/CR-10_5S/Configuration.h | 23 +++++++--------
.../Creality/CR-10mini/Configuration.h | 23 +++++++--------
.../Creality/CR-20 Pro/Configuration.h | 23 +++++++--------
.../examples/Creality/CR-20/Configuration.h | 23 +++++++--------
config/examples/Creality/CR-8/Configuration.h | 23 +++++++--------
.../examples/Creality/Ender-2/Configuration.h | 23 +++++++--------
.../examples/Creality/Ender-3/Configuration.h | 23 +++++++--------
.../examples/Creality/Ender-4/Configuration.h | 23 +++++++--------
.../examples/Creality/Ender-5/Configuration.h | 25 ++++++++--------
.../Dagoma/Disco Ultimate/Configuration.h | 23 +++++++--------
.../Sidewinder X1/Configuration.h | 23 +++++++--------
config/examples/Einstart-S/Configuration.h | 23 +++++++--------
config/examples/Felix/Configuration.h | 23 +++++++--------
config/examples/Felix/DUAL/Configuration.h | 23 +++++++--------
.../FlashForge/CreatorPro/Configuration.h | 23 +++++++--------
.../FolgerTech/i3-2020/Configuration.h | 23 +++++++--------
.../examples/Formbot/Raptor/Configuration.h | 23 +++++++--------
.../examples/Formbot/T_Rex_2+/Configuration.h | 23 +++++++--------
.../examples/Formbot/T_Rex_3/Configuration.h | 23 +++++++--------
config/examples/Fysetc/AIO_II/Configuration.h | 23 +++++++--------
.../examples/Fysetc/CHEETAH/Configuration.h | 23 +++++++--------
config/examples/Fysetc/F6_13/Configuration.h | 23 +++++++--------
config/examples/Geeetech/A10/Configuration.h | 23 +++++++--------
config/examples/Geeetech/A10M/Configuration.h | 23 +++++++--------
config/examples/Geeetech/A20M/Configuration.h | 23 +++++++--------
.../examples/Geeetech/GT2560/Configuration.h | 23 +++++++--------
.../Geeetech/I3_Pro_X-GT2560/Configuration.h | 23 +++++++--------
.../Geeetech/MeCreator2/Configuration.h | 23 +++++++--------
.../Prusa i3 Pro B/bltouch/Configuration.h | 23 +++++++--------
.../Prusa i3 Pro B/noprobe/Configuration.h | 23 +++++++--------
.../Geeetech/Prusa i3 Pro C/Configuration.h | 23 +++++++--------
.../Geeetech/Prusa i3 Pro W/Configuration.h | 23 +++++++--------
.../examples/Infitary/i3-M508/Configuration.h | 23 +++++++--------
config/examples/JGAurora/A1/Configuration.h | 23 +++++++--------
config/examples/JGAurora/A5/Configuration.h | 23 +++++++--------
config/examples/JGAurora/A5S/Configuration.h | 23 +++++++--------
config/examples/MakerParts/Configuration.h | 23 +++++++--------
config/examples/Malyan/M150/Configuration.h | 23 +++++++--------
config/examples/Malyan/M200/Configuration.h | 23 +++++++--------
.../Micromake/C1/basic/Configuration.h | 23 +++++++--------
.../Micromake/C1/enhanced/Configuration.h | 23 +++++++--------
config/examples/Mks/Robin/Configuration.h | 23 +++++++--------
config/examples/Mks/Sbase/Configuration.h | 23 +++++++--------
.../Printrbot/PrintrboardG2/Configuration.h | 23 +++++++--------
.../examples/RapideLite/RL200/Configuration.h | 23 +++++++--------
.../examples/RepRapPro/Huxley/Configuration.h | 23 +++++++--------
.../RepRapWorld/Megatronics/Configuration.h | 23 +++++++--------
config/examples/RigidBot/Configuration.h | 23 +++++++--------
config/examples/SCARA/Configuration.h | 23 +++++++--------
.../STM32/Black_STM32F407VET6/Configuration.h | 23 +++++++--------
.../examples/STM32/STM32F10/Configuration.h | 23 +++++++--------
config/examples/STM32/STM32F4/Configuration.h | 23 +++++++--------
.../STM32/stm32f103ret6/Configuration.h | 23 +++++++--------
config/examples/Sanguinololu/Configuration.h | 23 +++++++--------
.../Tevo/Tarantula Pro/Configuration.h | 23 +++++++--------
config/examples/TheBorg/Configuration.h | 23 +++++++--------
config/examples/TinyBoy2/Configuration.h | 23 +++++++--------
config/examples/Tronxy/X1/Configuration.h | 23 +++++++--------
config/examples/Tronxy/X3A/Configuration.h | 23 +++++++--------
config/examples/Tronxy/X5S-2E/Configuration.h | 23 +++++++--------
config/examples/Tronxy/X5S/Configuration.h | 23 +++++++--------
config/examples/Tronxy/XY100/Configuration.h | 23 +++++++--------
.../UltiMachine/Archim1/Configuration.h | 23 +++++++--------
.../UltiMachine/Archim2/Configuration.h | 23 +++++++--------
config/examples/VORONDesign/Configuration.h | 23 +++++++--------
.../examples/Velleman/K8200/Configuration.h | 23 +++++++--------
.../examples/Velleman/K8400/Configuration.h | 23 +++++++--------
.../Velleman/K8400/Dual-head/Configuration.h | 23 +++++++--------
.../examples/WASP/PowerWASP/Configuration.h | 23 +++++++--------
.../Wanhao/Duplicator 6/Configuration.h | 23 +++++++--------
.../examples/adafruit/ST7565/Configuration.h | 23 +++++++--------
.../delta/Anycubic/Kossel/Configuration.h | 23 +++++++--------
.../FLSUN/auto_calibrate/Configuration.h | 23 +++++++--------
.../delta/FLSUN/kossel/Configuration.h | 23 +++++++--------
.../delta/FLSUN/kossel_mini/Configuration.h | 23 +++++++--------
.../Geeetech/Rostock 301/Configuration.h | 23 +++++++--------
.../delta/Hatchbox_Alpha/Configuration.h | 23 +++++++--------
.../examples/delta/MKS/SBASE/Configuration.h | 23 +++++++--------
.../delta/Tevo Little Monster/Configuration.h | 23 +++++++--------
config/examples/delta/generic/Configuration.h | 23 +++++++--------
.../delta/kossel_mini/Configuration.h | 23 +++++++--------
.../examples/delta/kossel_pro/Configuration.h | 23 +++++++--------
.../examples/delta/kossel_xl/Configuration.h | 23 +++++++--------
.../examples/gCreate/gMax1.5+/Configuration.h | 23 +++++++--------
config/examples/makibox/Configuration.h | 23 +++++++--------
config/examples/tvrrug/Round2/Configuration.h | 23 +++++++--------
config/examples/wt150/Configuration.h | 23 +++++++--------
119 files changed, 1142 insertions(+), 1461 deletions(-)
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 87146750ba..f0a826ac6d 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/Marlin/src/Marlin.h b/Marlin/src/Marlin.h
index 1e3dd35797..cef5950b99 100644
--- a/Marlin/src/Marlin.h
+++ b/Marlin/src/Marlin.h
@@ -349,8 +349,8 @@ extern millis_t max_inactive_time, stepper_inactive_time;
#if HAS_POWER_SWITCH
extern bool powersupply_on;
- #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0)
- #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0)
+ #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
+ #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_HIGH); powersupply_on = false; }while(0)
#if ENABLED(AUTO_POWER_CONTROL)
#define PSU_ON() powerManager.power_on()
#define PSU_OFF() powerManager.power_off()
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 4531616437..1f283c6453 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -111,8 +111,8 @@
* M76 - Pause the print job timer.
* M77 - Stop the print job timer.
* M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
- * M80 - Turn on Power Supply. (Requires POWER_SUPPLY > 0)
- * M81 - Turn off Power Supply. (Requires POWER_SUPPLY > 0)
+ * M80 - Turn on Power Supply. (Requires PSU_CONTROL)
+ * M81 - Turn off Power Supply. (Requires PSU_CONTROL)
* M82 - Set E codes absolute (default).
* M83 - Set E codes relative while in Absolute (G90) mode.
* M84 - Disable steppers until next move, or use S<seconds> to specify an idle
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 18713e462b..b55c658024 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -148,7 +148,7 @@
#define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 220
#define LED_COLORS_REDUCE_GREEN
- #if POWER_SUPPLY > 0 && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
+ #if (HAS_POWER_SWITCH && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1))
#define LED_BACKLIGHT_TIMEOUT 10000
#endif
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index af1a95138d..5fc46fa0d5 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -269,19 +269,22 @@
#define DISABLE_INACTIVE_E DISABLE_E
#endif
-// Power Signal Control Definitions
-// By default use ATX definition
-#ifndef POWER_SUPPLY
- #define POWER_SUPPLY 1
-#endif
-#if (POWER_SUPPLY == 1) // 1 = ATX
- #define PS_ON_AWAKE LOW
- #define PS_ON_ASLEEP HIGH
-#elif (POWER_SUPPLY == 2) // 2 = X-Box 360 203W
- #define PS_ON_AWAKE HIGH
- #define PS_ON_ASLEEP LOW
-#endif
-#define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
+/**
+ * Power Supply Control
+ */
+#ifndef PSU_NAME
+ #if ENABLED(PSU_CONTROL)
+ #if PSU_ACTIVE_HIGH
+ #define PSU_NAME "XBox" // X-Box 360 (203W)
+ #else
+ #define PSU_NAME "ATX" // ATX style
+ #endif
+ #else
+ #define PSU_NAME "Generic" // No control
+ #endif
+#endif
+
+#define HAS_POWER_SWITCH (ENABLED(PSU_CONTROL) && PIN_EXISTS(PS_ON))
/**
* Temp Sensor defines
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index b8b3ec5ec4..1f2498b8a2 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -376,6 +376,12 @@
#error "USB_SD_DISABLED is now NO_SD_HOST_DRIVE. Please update your Configuration_adv.h."
#elif defined(USB_SD_ONBOARD)
#error "USB_SD_ONBOARD is obsolete. Disable NO_SD_HOST_DRIVE instead."
+#elif POWER_SUPPLY == 1
+ #error "Replace POWER_SUPPLY 1 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'false'."
+#elif POWER_SUPPLY == 2
+ #error "Replace POWER_SUPPLY 2 by enabling PSU_CONTROL and setting PSU_ACTIVE_HIGH to 'true'."
+#elif defined(POWER_SUPPLY)
+ #error "POWER_SUPPLY is now obsolete. Please remove it from Configuration.h."
#endif
#define BOARD_MKS_13 -47
@@ -1548,7 +1554,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
/**
* LED Backlight Timeout
*/
-#if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && POWER_SUPPLY > 0)
+#if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && HAS_POWER_SWITCH)
#error "LED_BACKLIGHT_TIMEOUT requires a Fysetc Mini Panel and a Power Switch."
#endif
@@ -2297,6 +2303,13 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif
#endif
+/**
+ * Ensure this option is set intentionally
+ */
+#if ENABLED(PSU_CONTROL) && !defined(PSU_ACTIVE_HIGH)
+ #error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
+#endif
+
#if HAS_CUTTER
#define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN)
#if BOTH(SPINDLE_FEATURE, LASER_FEATURE)
diff --git a/Marlin/src/lcd/menu/menu_info.cpp b/Marlin/src/lcd/menu/menu_info.cpp
index d621711c69..f7b6f3a491 100644
--- a/Marlin/src/lcd/menu/menu_info.cpp
+++ b/Marlin/src/lcd/menu/menu_info.cpp
@@ -176,13 +176,7 @@ void menu_info_board() {
STATIC_ITEM(BOARD_NAME, true, true); // MyPrinterController
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE), true); // Baud: 250000
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION, true); // Protocol: 1.0
- #if POWER_SUPPLY == 0
- STATIC_ITEM(MSG_INFO_PSU ": Generic", true);
- #elif POWER_SUPPLY == 1
- STATIC_ITEM(MSG_INFO_PSU ": ATX", true); // Power Supply: ATX
- #elif POWER_SUPPLY == 2
- STATIC_ITEM(MSG_INFO_PSU ": XBox", true); // Power Supply: XBox
- #endif
+ STATIC_ITEM(MSG_INFO_PSU ": " PSU_NAME, true);
END_SCREEN();
}
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index d62e833d44..4651faec45 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -741,7 +741,7 @@
#ifndef LED_PIN
#define LED_PIN -1
#endif
-#if POWER_SUPPLY == 0 || !defined(PS_ON_PIN)
+#if DISABLED(PSU_CONTROL) || !defined(PS_ON_PIN)
#undef PS_ON_PIN
#define PS_ON_PIN -1
#endif
diff --git a/Marlin/src/pins/pins_MKS_GEN_13.h b/Marlin/src/pins/pins_MKS_GEN_13.h
index b5fb85feca..2040489119 100644
--- a/Marlin/src/pins/pins_MKS_GEN_13.h
+++ b/Marlin/src/pins/pins_MKS_GEN_13.h
@@ -44,9 +44,9 @@
//
// PSU / SERVO
//
-// If POWER_SUPPLY is specified, always hijack Servo 3
+// If PSU_CONTROL is specified, always hijack Servo 3
//
-#if POWER_SUPPLY > 0
+#if ENABLED(PSU_CONTROL)
#define SERVO3_PIN -1
#define PS_ON_PIN 4
#endif
diff --git a/buildroot/share/tests/megaatmega2560-tests b/buildroot/share/tests/megaatmega2560-tests
index 119438af09..2e2bc4442d 100755
--- a/buildroot/share/tests/megaatmega2560-tests
+++ b/buildroot/share/tests/megaatmega2560-tests
@@ -27,7 +27,6 @@ opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_1 1
opt_set TEMP_SENSOR_BED 2
-opt_set POWER_SUPPLY 1
opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53
opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
@@ -37,7 +36,7 @@ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE \
FWRETRACT ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
- AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
+ PSU_CONTROL AUTO_POWER_CONTROL POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE \
LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST PINS_DEBUGGING \
MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE
opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index 87146750ba..f0a826ac6d 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 76a27afc29..e89fce346c 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index cf02913780..67d81e9822 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 35d77f9fa2..27fb4e25c3 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 24547ee1ca..e78d7833d9 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 2df542e066..d958224023 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index a07bb04eb2..c3e7e28402 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 57f46c5f16..0c51b283bf 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 630f9142de..d5da9d2569 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -313,22 +313,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 9f30d73305..13dffd5c6b 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -313,22 +313,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index fbf5b9c79c..031fe518d4 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index a931f8aef3..ba2792fbbc 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 254e0cf2cf..1c74b9ca0f 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index b67f1eebd2..1fa040695e 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index b18b7d1839..89e46bea99 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 20315662e1..c144505dc5 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 70a4a55a38..bc7e212da8 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index f859e4e045..ab241ac0fa 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -320,22 +320,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -345,7 +343,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 0ac0f94910..34856d9246 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 9be1e8474c..d8b2f4fcaa 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -313,22 +313,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 358cb17e1a..eab96aa71d 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index e7dbee1ae5..fb53d1e996 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 32c2f7b3ae..1f993b4111 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index fbe4b1b192..08a46ec9ef 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -321,22 +321,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -346,7 +344,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index c635c075fa..c284920f05 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index fb9ff5e8e7..9ca659e5b9 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index a81f4604d8..62695f0ba7 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 00b2ec26af..84528aa9e6 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 17e0513288..32637c7ea8 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 80a9ad7764..b133785a14 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index 8fb8e93b20..fd0021b77d 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -312,30 +312,29 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
#define AUTO_POWER_CONTROLLERFAN
#define AUTO_POWER_CHAMBER_FAN
+ //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
+ //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index 2e58ba81f4..7ffeb6ff62 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index 2127385df4..9a788a0b39 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index e083805b44..35b61755f3 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index 5ecaadb73f..710143f880 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- #define PS_DEFAULT_OFF
+ #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index d7d62565d0..25b549fa3b 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- #define PS_DEFAULT_OFF
+ #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index e9d5833e67..cdc0feba23 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index f33cbef3ab..3261d4a679 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 946aeedc7a..27185602bd 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -353,22 +353,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -378,7 +376,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 331aa1a8c3..2c4911259a 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -321,22 +321,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -346,7 +344,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 128d606da4..be198e7f4c 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -316,22 +316,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -341,7 +339,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Fysetc/AIO_II/Configuration.h b/config/examples/Fysetc/AIO_II/Configuration.h
index 155921f20e..6fd40430e6 100644
--- a/config/examples/Fysetc/AIO_II/Configuration.h
+++ b/config/examples/Fysetc/AIO_II/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Fysetc/CHEETAH/Configuration.h b/config/examples/Fysetc/CHEETAH/Configuration.h
index 8c71da871f..ad7a948c91 100644
--- a/config/examples/Fysetc/CHEETAH/Configuration.h
+++ b/config/examples/Fysetc/CHEETAH/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Fysetc/F6_13/Configuration.h b/config/examples/Fysetc/F6_13/Configuration.h
index 85007d4f2f..9e314b8672 100644
--- a/config/examples/Fysetc/F6_13/Configuration.h
+++ b/config/examples/Fysetc/F6_13/Configuration.h
@@ -314,22 +314,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -339,7 +337,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 9d2e996e59..1038ab9691 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 97a14c5539..6c976b0840 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index bac5dc6006..6a3ecfa18c 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 5676269436..3da73e70cd 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index a82215a783..886c86b18d 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 19c1f4387a..69ed2d490b 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 07cbe68880..43d7306b12 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index e3281a660b..53597ea441 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 3c3c0a097e..3fb2e1e5fa 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index a5dad4facc..4fcc8fc5bb 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index b495c5823e..ecf3d1927b 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 98e7d37f8c..d6fe90c179 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 46f4928d6c..777ccc93bb 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -317,22 +317,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 3dcdb0d397..c1a5f6de0d 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 58a3838f4d..8a36536bae 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -332,22 +332,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -357,7 +355,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 7f121d3f37..6b3bab02ea 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -317,22 +317,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index d1ff509eb3..dedb485e16 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index dd36127e67..936fd72929 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index a86c0ddccf..e16c1ba62d 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 6fc05643fa..96a6bb7fbd 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -313,22 +313,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index f739c44b29..f004854d6c 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
-#define PS_DEFAULT_OFF
+ #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 3af9215674..7dbe27cd27 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -313,22 +313,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -338,7 +336,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index 131be8fcd8..ded24473d2 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 2fc377d76e..11f5e394ab 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index c621253a4d..354f62b614 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index dad1fe9c81..74db97820b 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -315,22 +315,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -340,7 +338,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 4f069a670b..a563b4e2d6 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -339,22 +339,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -364,7 +362,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index f4fc9aa93e..706db8c9a2 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index a0012d471e..6e2a08abc8 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 718e41e863..92715a362c 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 2078e53f57..607ca8cb4b 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index 2f66ba246f..38746e2b7d 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index f102c100a6..0995a15e69 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index d90f111b47..f0adb0908b 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 868a2fe4d5..e810771811 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -334,22 +334,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -359,7 +357,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 664f077a6a..6979cde44a 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index a304099637..6b39b8d13f 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index a782053249..caa7d9dee8 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -314,22 +314,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -339,7 +337,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 24a16a0040..0f57f82223 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 4458f6e8a8..bca3d4195d 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index c9a0e4f61b..16e6662b26 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index b8d16958c6..b0b32750e1 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index b5b6f6bb66..8585a80109 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 80ffc83076..4efe30bc46 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -332,22 +332,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -357,7 +355,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index cd61a6d2c6..1e6550e5d7 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index fd730158aa..7e41e8ba87 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 5969076fcc..937e1ef51a 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -331,22 +331,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -356,7 +354,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 04b2c23964..ca6554229d 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index 34be2875d7..bca7de92dd 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index 535ed74a63..919f5ce234 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -327,22 +327,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -352,7 +350,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index c889bb4b8a..cf250bc3f3 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index 1f4f347e7e..e749f0def9 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 6304993e67..e472a9889f 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index ae0e194a11..364264804a 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 23e595630f..a93d2edb74 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -317,22 +317,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 79cfebbe17..df2d9558a2 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- #define PS_DEFAULT_OFF
+ #define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 74f45c70f6..e134b4dc2f 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 3aff0ccdd8..f7eb796d08 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index f316cb43f9..103cfe52f1 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 0b4f4a1882..ad56cf4fd0 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -316,22 +316,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -341,7 +339,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index b33e3924d9..16fc46fd4a 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 2
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH true // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- #define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 6d872909bd..f9870b6967 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -317,22 +317,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -342,7 +340,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 6148b640c3..09a9cc3aee 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 80308e6ebe..c19a991365 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 1
+#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index 46e5458cd5..a144fe7a9b 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -312,22 +312,20 @@
// @section machine
/**
- * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ * Power Supply Control
*
- * 0 = No Power Switch
- * 1 = ATX
- * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
- *
- * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ * Enable and connect the power supply to the PS_ON_PIN.
+ * Specify whether the power supply is active HIGH or active LOW.
*/
-#define POWER_SUPPLY 0
+//#define PSU_CONTROL
+//#define PSU_NAME "Power Supply"
+
+#if ENABLED(PSU_CONTROL)
+ #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
-#if POWER_SUPPLY > 0
- // Enable this option to leave the PSU off at startup.
- // Power to steppers and heaters will need to be turned on with M80.
- //#define PS_DEFAULT_OFF
+ //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
- //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
#if ENABLED(AUTO_POWER_CONTROL)
#define AUTO_POWER_FANS // Turn on PSU if fans need power
#define AUTO_POWER_E_FANS
@@ -337,7 +335,6 @@
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
#define POWER_TIMEOUT 30
#endif
-
#endif
// @section temperature
--
GitLab