diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 5935f992691eb164b9820e8fc9b08bc1788d3ed2..16f1ca68005cc7e6ee42f61ded2bc44035f08382 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
index 253c9159adb720266ab8c03ad38356c4b399f97f..9e2904277899ffd4b5627425d41b5f5327201956 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -1381,6 +1381,8 @@
#if HAS_BED_PROBE
+ //#define VALIDATE_MESH_TILT
+
#include "../../../libs/vector_3.h"
void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_3_pt_leveling) {
@@ -1392,7 +1394,9 @@
float measured_z;
bool abort_flag = false;
- //float z1, z2, z3; // Needed for algorithm validation below
+ #ifdef VALIDATE_MESH_TILT
+ float z1, z2, z3; // Needed for algorithm validation below
+ #endif
struct linear_fit_data lsf_results;
incremental_LSF_reset(&lsf_results);
@@ -1403,17 +1407,19 @@
ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " 1/3"));
#endif
- measured_z = probe_at_point(PROBE_PT_1_X, PROBE_PT_1_Y, PROBE_PT_RAISE, g29_verbose_level);
+ measured_z = probe_at_point(x_min, y_min, PROBE_PT_RAISE, g29_verbose_level);
if (isnan(measured_z))
abort_flag = true;
else {
- measured_z -= get_z_correction(PROBE_PT_1_X, PROBE_PT_1_Y);
- //z1 = measured_z;
+ measured_z -= get_z_correction(x_min, y_min);
+ #ifdef VALIDATE_MESH_TILT
+ z1 = measured_z;
+ #endif
if (g29_verbose_level > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
}
- incremental_LSF(&lsf_results, PROBE_PT_1_X, PROBE_PT_1_Y, measured_z);
+ incremental_LSF(&lsf_results, x_min, y_min, measured_z);
}
if (!abort_flag) {
@@ -1422,17 +1428,19 @@
ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " 2/3"));
#endif
- measured_z = probe_at_point(PROBE_PT_2_X, PROBE_PT_2_Y, PROBE_PT_RAISE, g29_verbose_level);
- //z2 = measured_z;
+ measured_z = probe_at_point(x_max, y_min, PROBE_PT_RAISE, g29_verbose_level);
+ #ifdef VALIDATE_MESH_TILT
+ z2 = measured_z;
+ #endif
if (isnan(measured_z))
abort_flag = true;
else {
- measured_z -= get_z_correction(PROBE_PT_2_X, PROBE_PT_2_Y);
+ measured_z -= get_z_correction(x_max, y_min);
if (g29_verbose_level > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
}
- incremental_LSF(&lsf_results, PROBE_PT_2_X, PROBE_PT_2_Y, measured_z);
+ incremental_LSF(&lsf_results, x_max, y_min, measured_z);
}
}
@@ -1442,17 +1450,20 @@
ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " 3/3"));
#endif
- measured_z = probe_at_point(PROBE_PT_3_X, PROBE_PT_3_Y, PROBE_PT_STOW, g29_verbose_level);
- //z3 = measured_z;
+ const float center_probe = (x_max - x_min) / 2;
+ measured_z = probe_at_point(center_probe, y_max, PROBE_PT_STOW, g29_verbose_level);
+ #ifdef VALIDATE_MESH_TILT
+ z3 = measured_z;
+ #endif
if (isnan(measured_z))
abort_flag = true;
else {
- measured_z -= get_z_correction(PROBE_PT_3_X, PROBE_PT_3_Y);
+ measured_z -= get_z_correction(center_probe, y_max);
if (g29_verbose_level > 3) {
serial_spaces(16);
SERIAL_ECHOLNPAIR("Corrected_Z=", measured_z);
}
- incremental_LSF(&lsf_results, PROBE_PT_3_X, PROBE_PT_3_Y, measured_z);
+ incremental_LSF(&lsf_results, center_probe, y_max, measured_z);
}
}
@@ -1598,34 +1609,34 @@
* is calculated. The Z error between the probed point locations and the get_z_correction()
* numbers for those locations should be 0.
*/
- #if 0
- float t, t1, d;
- t = normal.x * (PROBE_PT_1_X) + normal.y * (PROBE_PT_1_Y);
- d = t + normal.z * z1;
- DEBUG_ECHOPAIR_F("D from 1st point: ", d, 6);
- DEBUG_ECHOLNPAIR_F(" Z error: ", normal.z*z1-get_z_correction(PROBE_PT_1_X, PROBE_PT_1_Y), 6);
-
- t = normal.x * (PROBE_PT_2_X) + normal.y * (PROBE_PT_2_Y);
- d = t + normal.z * z2;
- DEBUG_EOL();
- DEBUG_ECHOPAIR_F("D from 2nd point: ", d, 6);
- DEBUG_ECHOLNPAIR_F(" Z error: ", normal.z*z2-get_z_correction(PROBE_PT_2_X, PROBE_PT_2_Y), 6);
-
- t = normal.x * (PROBE_PT_3_X) + normal.y * (PROBE_PT_3_Y);
- d = t + normal.z * z3;
- DEBUG_ECHOPAIR_F("D from 3rd point: ", d, 6);
- DEBUG_ECHOLNPAIR_F(" Z error: ", normal.z*z3-get_z_correction(PROBE_PT_3_X, PROBE_PT_3_Y), 6);
-
- t = normal.x * (Z_SAFE_HOMING_X_POINT) + normal.y * (Z_SAFE_HOMING_Y_POINT);
- d = t + normal.z * 0;
- DEBUG_ECHOLNPAIR_F("D from home location with Z=0 : ", d, 6);
-
- t = normal.x * (Z_SAFE_HOMING_X_POINT) + normal.y * (Z_SAFE_HOMING_Y_POINT);
- d = t + get_z_correction(Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT); // normal.z * 0;
- DEBUG_ECHOPAIR_F("D from home location using mesh value for Z: ", d, 6);
-
- DEBUG_ECHOPAIR(" Z error: (", Z_SAFE_HOMING_X_POINT, ",", Z_SAFE_HOMING_Y_POINT);
- DEBUG_ECHOLNPAIR_F(") = ", get_z_correction(Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT), 6);
+ #ifdef VALIDATE_MESH_TILT
+ float t, t1, d;
+ t = normal.x * x_min + normal.y * y_min;
+ d = t + normal.z * z1;
+ DEBUG_ECHOPAIR_F("D from 1st point: ", d, 6);
+ DEBUG_ECHOLNPAIR_F(" Z error: ", normal.z * z1 - get_z_correction(x_min, y_min), 6);
+
+ t = normal.x * x_max + normal.y * y_min;
+ d = t + normal.z * z2;
+ DEBUG_EOL();
+ DEBUG_ECHOPAIR_F("D from 2nd point: ", d, 6);
+ DEBUG_ECHOLNPAIR_F(" Z error: ", normal.z * z2 - get_z_correction(x_max, y_min), 6);
+
+ t = normal.x * ((x_max - x_min) / 2) + normal.y * (y_min);
+ d = t + normal.z * z3;
+ DEBUG_ECHOPAIR_F("D from 3rd point: ", d, 6);
+ DEBUG_ECHOLNPAIR_F(" Z error: ", normal.z * z3 - get_z_correction((x_max - x_min) / 2, y_max), 6);
+
+ t = normal.x * (Z_SAFE_HOMING_X_POINT) + normal.y * (Z_SAFE_HOMING_Y_POINT);
+ d = t + normal.z * 0;
+ DEBUG_ECHOLNPAIR_F("D from home location with Z=0 : ", d, 6);
+
+ t = normal.x * (Z_SAFE_HOMING_X_POINT) + normal.y * (Z_SAFE_HOMING_Y_POINT);
+ d = t + get_z_correction(Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT); // normal.z * 0;
+ DEBUG_ECHOPAIR_F("D from home location using mesh value for Z: ", d, 6);
+
+ DEBUG_ECHOPAIR(" Z error: (", Z_SAFE_HOMING_X_POINT, ",", Z_SAFE_HOMING_Y_POINT);
+ DEBUG_ECHOLNPAIR_F(") = ", get_z_correction(Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT), 6);
#endif
} // DEBUGGING(LEVELING)
diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp
index 01c0cd19b4780da45360345cd2cd6f602e85b49f..584d3a11c63a780a0785df31cb5c2365fe8eb7d6 100644
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -266,10 +266,11 @@ G29_TYPE GcodeSuite::G29() {
#endif
// Probe at 3 arbitrary points
+ const float x_min = probe_min_x(), x_max = probe_max_x(), y_min = probe_min_y(), y_max = probe_max_y();
ABL_VAR vector_3 points[3] = {
- vector_3(PROBE_PT_1_X, PROBE_PT_1_Y, 0),
- vector_3(PROBE_PT_2_X, PROBE_PT_2_Y, 0),
- vector_3(PROBE_PT_3_X, PROBE_PT_3_Y, 0)
+ vector_3(x_min, y_min, 0),
+ vector_3(x_max, y_min, 0),
+ vector_3((x_max - x_min) / 2, y_max, 0)
};
#endif // AUTO_BED_LEVELING_3POINT
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index fb769149530cffd9c6dd81f3759e89ae63be737f..440ff4e6a909d6fb514d4c450ab4984f17f5dfd6 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -200,6 +200,10 @@
#undef SLOWDOWN
#endif
+#ifndef MESH_INSET
+ #define MESH_INSET 0
+#endif
+
/**
* Safe Homing Options
*/
@@ -1490,15 +1494,6 @@ constexpr float nozzle_to_probe_offset[XYZ] = NOZZLE_TO_PROBE_OFFSET;
#define PROBE_Y_MIN (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MIN_PROBE_EDGE)
#define PROBE_X_MAX (X_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
#define PROBE_Y_MAX (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MIN_PROBE_EDGE))
-
-#else
-
- // Boundaries for Cartesian probing based on bed limits
- #define PROBE_X_MIN (_MAX(X_MIN_BED + MIN_PROBE_EDGE, X_MIN_POS + nozzle_to_probe_offset[X_AXIS]))
- #define PROBE_Y_MIN (_MAX(Y_MIN_BED + MIN_PROBE_EDGE, Y_MIN_POS + nozzle_to_probe_offset[Y_AXIS]))
- #define PROBE_X_MAX (_MIN(X_MAX_BED - (MIN_PROBE_EDGE), X_MAX_POS + nozzle_to_probe_offset[X_AXIS]))
- #define PROBE_Y_MAX (_MIN(Y_MAX_BED - (MIN_PROBE_EDGE), Y_MAX_POS + nozzle_to_probe_offset[Y_AXIS]))
-
#endif
#if ENABLED(SEGMENT_LEVELED_MOVES) && !defined(LEVELED_SEGMENT_LENGTH)
@@ -1508,7 +1503,7 @@ constexpr float nozzle_to_probe_offset[XYZ] = NOZZLE_TO_PROBE_OFFSET;
/**
* Default mesh area is an area with an inset margin on the print area.
*/
-#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_BILINEAR)
#if IS_KINEMATIC
// Probing points may be verified at compile time within the radius
// using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
@@ -1548,54 +1543,6 @@ constexpr float nozzle_to_probe_offset[XYZ] = NOZZLE_TO_PROBE_OFFSET;
#endif // MESH_BED_LEVELING || AUTO_BED_LEVELING_UBL
-#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
- #if IS_KINEMATIC
- #define SIN0 0.0
- #define SIN120 0.866025
- #define SIN240 -0.866025
- #define COS0 1.0
- #define COS120 -0.5
- #define COS240 -0.5
- #ifndef PROBE_PT_1_X
- #define PROBE_PT_1_X (X_CENTER + (_PROBE_RADIUS) * COS0)
- #endif
- #ifndef PROBE_PT_1_Y
- #define PROBE_PT_1_Y (Y_CENTER + (_PROBE_RADIUS) * SIN0)
- #endif
- #ifndef PROBE_PT_2_X
- #define PROBE_PT_2_X (X_CENTER + (_PROBE_RADIUS) * COS120)
- #endif
- #ifndef PROBE_PT_2_Y
- #define PROBE_PT_2_Y (Y_CENTER + (_PROBE_RADIUS) * SIN120)
- #endif
- #ifndef PROBE_PT_3_X
- #define PROBE_PT_3_X (X_CENTER + (_PROBE_RADIUS) * COS240)
- #endif
- #ifndef PROBE_PT_3_Y
- #define PROBE_PT_3_Y (Y_CENTER + (_PROBE_RADIUS) * SIN240)
- #endif
- #else
- #ifndef PROBE_PT_1_X
- #define PROBE_PT_1_X PROBE_X_MIN
- #endif
- #ifndef PROBE_PT_1_Y
- #define PROBE_PT_1_Y PROBE_Y_MIN
- #endif
- #ifndef PROBE_PT_2_X
- #define PROBE_PT_2_X PROBE_X_MAX
- #endif
- #ifndef PROBE_PT_2_Y
- #define PROBE_PT_2_Y PROBE_Y_MIN
- #endif
- #ifndef PROBE_PT_3_X
- #define PROBE_PT_3_X X_CENTER
- #endif
- #ifndef PROBE_PT_3_Y
- #define PROBE_PT_3_Y PROBE_Y_MAX
- #endif
- #endif
-#endif
-
/**
* Buzzer/Speaker
*/
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 02d3b5ad89ad0204bdd622c29a9ddcd3db38e8d0..55ff76efb675cc7ec300f12fb689135ded777200 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -248,9 +248,11 @@
#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y)
#error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration."
#elif defined(ABL_PROBE_PT_1_X) || defined(ABL_PROBE_PT_1_Y) || defined(ABL_PROBE_PT_2_X) || defined(ABL_PROBE_PT_2_Y) || defined(ABL_PROBE_PT_3_X) || defined(ABL_PROBE_PT_3_Y)
- #error "ABL_PROBE_PT_[123]_[XY] is now PROBE_PT_[123]_[XY]. Please update your configuration."
+ #error "ABL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
#elif defined(UBL_PROBE_PT_1_X) || defined(UBL_PROBE_PT_1_Y) || defined(UBL_PROBE_PT_2_X) || defined(UBL_PROBE_PT_2_Y) || defined(UBL_PROBE_PT_3_X) || defined(UBL_PROBE_PT_3_Y)
- #error "UBL_PROBE_PT_[123]_[XY] is now PROBE_PT_[123]_[XY]. Please update your configuration."
+ #error "UBL_PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
+#elif defined(PROBE_PT_1_X) || defined(PROBE_PT_1_Y) || defined(PROBE_PT_2_X) || defined(PROBE_PT_2_Y) || defined(PROBE_PT_3_X) || defined(PROBE_PT_3_Y)
+ #error "PROBE_PT_[123]_[XY] is no longer required. Please remove it from Configuration.h."
#elif defined(ENABLE_MESH_EDIT_GFX_OVERLAY)
#error "ENABLE_MESH_EDIT_GFX_OVERLAY is now MESH_EDIT_GFX_OVERLAY. Please update your configuration."
#elif defined(BABYSTEP_ZPROBE_GFX_REVERSE)
@@ -1206,19 +1208,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Bed Leveling Requirements
*/
-//
-// !! TODO: REPLACE WITH TESTS IN THE 3-POINT LEVELING CODE !!
-//
-
-//#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
-// static_assert(WITHIN(PROBE_PT_1_X, PROBE_X_MIN, PROBE_X_MAX), "PROBE_PT_1_X is outside the probe region.");
-// static_assert(WITHIN(PROBE_PT_2_X, PROBE_X_MIN, PROBE_X_MAX), "PROBE_PT_2_X is outside the probe region.");
-// static_assert(WITHIN(PROBE_PT_3_X, PROBE_X_MIN, PROBE_X_MAX), "PROBE_PT_3_X is outside the probe region.");
-// static_assert(WITHIN(PROBE_PT_1_Y, PROBE_Y_MIN, PROBE_Y_MAX), "PROBE_PT_1_Y is outside the probe region.");
-// static_assert(WITHIN(PROBE_PT_2_Y, PROBE_Y_MIN, PROBE_Y_MAX), "PROBE_PT_2_Y is outside the probe region.");
-// static_assert(WITHIN(PROBE_PT_3_Y, PROBE_Y_MIN, PROBE_Y_MAX), "PROBE_PT_3_Y is outside the probe region.");
-//#endif
-
#if ENABLED(AUTO_BED_LEVELING_UBL)
/**
@@ -1318,12 +1307,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
* Make sure Z_SAFE_HOMING point is reachable
*/
#if ENABLED(Z_SAFE_HOMING)
- #if HAS_BED_PROBE
- //
- // !! TODO: REPLACE WITH TESTS IN THE Z_SAFE_HOMING CODE !!
- //
- //static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, PROBE_X_MIN, PROBE_X_MAX), "Z_SAFE_HOMING_X_POINT is outside the probe region.");
- //static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, PROBE_Y_MIN, PROBE_Y_MAX), "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
+ #if HAS_BED_PROBE && (ENABLED(DELTA) || IS_SCARA)
+ static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, PROBE_X_MIN, PROBE_X_MAX), "Z_SAFE_HOMING_X_POINT is outside the probe region.");
+ static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, PROBE_Y_MIN, PROBE_Y_MAX), "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
#else
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
diff --git a/buildroot/share/tests/LPC1769-tests b/buildroot/share/tests/LPC1769-tests
index e993f864921ea9e69bb51ca728cdb2a617c0c5a1..8e23551dd4cb5dcd9293536a1d73c1a8f3416c9e 100755
--- a/buildroot/share/tests/LPC1769-tests
+++ b/buildroot/share/tests/LPC1769-tests
@@ -44,13 +44,13 @@ exec_test $1 $2 "Smoothieboard with many features"
restore_configs
use_example_configs delta/generic
opt_set MOTHERBOARD BOARD_COHESION3D_REMIX
-opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT BAUD_RATE_GCODE
-opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
opt_set X_DRIVER_TYPE TMC2130
opt_set Y_DRIVER_TYPE TMC2130
opt_set Z_DRIVER_TYPE TMC2130
-opt_enable TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD TMC_DEBUG \
- SENSORLESS_PROBING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY
+opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT BAUD_RATE_GCODE \
+ TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
+ SENSORLESS_PROBING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG
+opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
exec_test $1 $2 "Cohesion3D Remix DELTA + ABL Bilinear + EEPROM + SENSORLESS_PROBING"
# clean up
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index 5935f992691eb164b9820e8fc9b08bc1788d3ed2..16f1ca68005cc7e6ee42f61ded2bc44035f08382 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 544e4f3de3b359029eb8983593693ae70cad7d0e..02e2735ec095e82d3145b49c98531495a73982d2 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1257,19 +1257,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
index 59e3078ee9717561843623ee06d0afdd32507e18..9456800d83efa98d09a5fe5aa9a286154b0e1411 100644
--- a/config/examples/ADIMLab/Gantry v1/Configuration.h
+++ b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1252,19 +1252,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
index d04e81725e74778295c7aa5c075dafb76db52b62..9be12ff0cad73e0744f6fdfffa432829a4cb3da7 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration.h
+++ b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1252,19 +1252,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 15369a2f849b13f507625d8bab1f1162b0443fac..777eb8e5ff48177c4ab34882dac9c6a10e2caaac 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -1271,19 +1271,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
index 3ef58dd294c37b88c6b873fa31001a71019665a8..00f1ece40f7609677534f78e1e46af8369bb6fad 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1330,19 +1330,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index ccba80b6fd188817e675336e29c8870007dad380..9186d0c843c3fded5a91b6076292da6c18718d91 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -1330,19 +1330,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 2fe1207031249a1052dab9af38920492eddf96ad..342b6b94ee77a5504f2b34f8a04a2155b1f5124f 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index f54ba9cf9bb1149d97bae277d7a8169a623d8c2b..d24c75cdc92af1e027bc9566586b5478bb698c2e 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1262,19 +1262,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index ef7e44b66c74110564c2c1f14128c9beb6d5b348..1a6c4b37f014e8e6243a131baee6fa448dec72b2 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 35b21bc2d0a32ce2ee20f7f673a85039d648586b..8ef0e7b11b2519b37386ab9472102c56148acc5d 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 3de2a9b466b13577cb78f959ee81b834fcd9b5c9..8122d4cd19c78601c4309e81cf0d99912a7a5b6c 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -1356,19 +1356,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 188a3a1de42b84e9627a6f2e787baad495ba80bb..06aee7111b2a2ca10d03576b996cfedc7a81f9b5 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -1262,19 +1262,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 2c39c847c011cd0e0e3bb23871923b855dd3041e..487ab36a57e8c998702b8852c08ebb38ec5d50ba 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -1263,19 +1263,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index a3a085700641efb9f84f9130a197e80cdb0796bf..e5f96e0d975bc29225945c9774aa082873a8dd85 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -1261,19 +1261,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 8521531a0e3704e24d02cf3e54661b675149f170..05436cb482debad54455162540c701d66b21cbc6 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -1252,19 +1252,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 695392815b883af96c0116ad6fa77a52e899d066..12574f07b8832517218fd6cdff46f497a6c4245a 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index bbd7bd15bb13d011398131e2c730460a5a218e10..e9995f707a68d7407dd1a22406f2861acaa72d68 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index dc4ec233411903516c46823bf20a54b6b2205db0..3cde043a460d1b0d3b0e08fc80fb43b37c345d17 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index b39ed5eca146e49088f2e46f3818da10669e675d..045c0698d51206553e37541ca4c4cc81553cb411 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -1239,19 +1239,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 41ec72637f05f303b2f8245c243ea80138138fe2..ae0d1771e0c7053b9ca95b019047f54a8e5f7066 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 3c99137eabe484bd2177cc961f511eb031929e25..520538fb870eb925fb539f03c1fbf49dc2af4844 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -1239,19 +1239,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 0cb76438011ed2af011520406ac334a53f7846ed..2a059914abb6ac7630bfb42ab994430d8b51e4e2 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -1250,19 +1250,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index b8844e05ed4cf46a602a20673354846a11f1dcce..f107cfcfbb964e9a84eab319348ec6d71565ee72 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -1261,19 +1261,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 50d596d88b7545df9f6c4650ca16a0840b2398f2..30904e3d1a45fce972273b3a766f5e9c6fe7bc47 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -1252,19 +1252,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 496fb80b79133160e2fe03a8b6f282e02d5c2b7f..03037f5a8a79f88c29fd6c93a44d2f7c3804030f 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -1254,19 +1254,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index 869a99f3605701b680d7f986fde5e3ba60de2220..f6124787b00ede4de8770a4a109a3399957e4e3e 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -1270,19 +1270,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index 751e5465c65e914e3bd5619ac9a2e1a1c0cd9276..c7962db100956af45b22c6e5bb7a73b7df27eeb3 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h
@@ -1254,19 +1254,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index cc4ad8449824f6ec5353fa0a05bfc6d68c09848e..d1166cb47553c7ff47b9e59876c19b71da12f12d 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -1254,19 +1254,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index b43986e0c6fa3fb0a8001504029e00df8aca55b1..571758dbdeba1b55898ec373b202e9163e500bd5 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -1261,19 +1261,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 7828c174ccce1ded50fc75dc098d8c3ebb9138b4..4ffdada6b45ca40a4d9c2b709e03c43e3f6edf04 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -1255,19 +1255,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index b3e6954958e063e81a1317a2af2c8e3c6621d7f2..a0c7888788cf2081d8a22fe1d8ffece7f7f91a15 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -1255,19 +1255,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 8e0fc2b4ff2defc905456775ef37fc81c2f56bc6..3015b746908e256c2caf213e9888e6986b261ed3 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -1261,19 +1261,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index 7e6e7bb43e15c5c2f1d5f982fcf6496d22a0ba2b..204be000bfef9e2a265adbaf7abab2f311e829e0 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -1254,19 +1254,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index c3bace97c189e3ce98f33c308dde38882c22f1ec..732cce94c7239fa5b1d2e4f850cab8f228659f5c 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index bd37b61aa338dd9187fc29f1878cea368439ceed..e9224face559255708554d5b30c407758829d491 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index 3f1b7f8968b76afe1165e708cc99bb98d5b5a728..255b3b620072a9dd8841c5ff692279f42dbb7998 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -1261,19 +1261,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index 5b32c7547cd4f961685f2bb6d24a818a2240c2a7..a9c1d348291943f346c1a7e67d9a6280a990aacb 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
index 5939e0b1ac6ba4f6b0cb1e62f26c2d6bd0e44047..7bb62ab321f34f017a7af75d3d419b08910b87b8 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
index 08d5bf296ba24cd2f9adadcc389670334d347bf9..be0410520425d4f44cc12a4ce258da89e17a8f51 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
index a7ed41f40cd84737fcffe00e3b209b5bbbd99ff1..39b146d9da17f68ddd9324ba96933595a5037b6e 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h
index b1d355bc0e67c8d677570c03207f28f245af7910..67fbd1ed3077ab2e89e03a482f20b82f8b0bc7f3 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index 1836ff42b299fefeffa33bafcccae4cf694c1742..3c0eeaee0ed06976bc6ec0fb12bd95983fd25dda 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -1253,19 +1253,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index 9e2afbe7ee31dc9154e4e108608c86d546a0fac8..f379d63cff32295bc92f955b581722c80288b444 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -1233,19 +1233,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index b7222bf7f1df38635f35f1a4f8d4e62a3ef6f79d..9adfb27ad24b423ab9cf1b1207376898de4d11e3 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -1233,19 +1233,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index bf5e797247b74ef2d2132f9ba0280b1279f79499..d8000b4d4adb6d6e0a1b4005f844e2d38ac0f007 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -1244,19 +1244,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 724fa5a6e53c65858a05869fb36f2fcde86a88be..51aaa489a873ce8fb2a40bc64734204dfc4e062a 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -1236,19 +1236,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index eb29b27d79f2abecaa8b009b852b3c8d5d7c2a4a..ab3f2578254862497ecf4faa95a7d80612fb44b5 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -1236,19 +1236,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 7da452b2709c021b38bc029d15dddd0af2b63c8e..1bcec7ac72a5e354379edb41a5bd4b2b17162468 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -1236,19 +1236,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 7126a9060a19e64385aff1d122920c874f8edfea..44f5939b5e0f4bb4ccb00acd1b98f1b80ac58750 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -1266,19 +1266,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index d2230d9c5c081d1733990a94e750ff96ad5a0eb0..7b26ebec7a65e8b24d4db7727acaf9f107d3b3d1 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 0c35f3d069d84afdbdb1087d4c11be53fada44de..edfd2c9179a919e3765de9a3458e1952d4aa942b 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -1258,19 +1258,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 2ec9c32afec929435e6cd1f1d85f832158f09694..02d543fa1bf770805592c0edef617119dd7c5efe 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -1272,19 +1272,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index fa131b25e1b211cbf1187b5810bdee137b38d966..bae11398aa554bcda2c388628a0eb44c6ff87025 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -1271,19 +1271,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 702bccde089a11661ce3762c7f67e8c18095f871..3ad7d31902b453b3ddf59eebd94f2182d700cd77 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index da6501543d86b9cf31f7d0d59bca0cb8c814eb5e..c7c00987b038fe70249e3a4a17950f753a3dce16 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h
index c408fa8d656e81840b581962337c8f9d3ccf5a93..463585eae22e54e9754d3dcba397ee3daca9e246 100644
--- a/config/examples/HMS434/Configuration.h
+++ b/config/examples/HMS434/Configuration.h
@@ -1238,19 +1238,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 962688e6503ae7bd6c28df84ab494d009a7dedf9..9f193679103d2468b57a04d56431469b16233512 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -1255,19 +1255,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 53cf30efb31494d1ee89f8a29efe9c2311e6f88d..8445110af11ee84e62483b6d517a2413f5dea2d7 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -1258,19 +1258,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 72150ab1da0ce6a790d2bf9fed32c7390ceb8681..8e2c31a08ef99bde44df5361100cb33358adcee2 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -1263,19 +1263,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 9c231a7c7a0c384b6b4151d908596862cb5754c0..09f34afe2cb618d33b2e5ec437e2aa6c4fc4abfc 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -1258,19 +1258,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 553882ae8da8b856426fa7dbfad84bcef831cbf1..b5ed76af0688e31202c97e3c21f384fe7dacdff2 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -1271,19 +1271,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index b5434599fdca4ae25d78f63c6718323ce790bd8e..179d0cdfa78be4d5b931c5cb8bcad6fdeba57cfe 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -1250,19 +1250,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 4c26a75b7e36d6ec1df09c1ecf1623827a126cd1..93489b0516efb62910d6b66396a316b463fd8e3d 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -1255,19 +1255,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 90dab802673e66ea738783ff5bab800731ca9514..d4dcbb6698f60f347bf3c9e885cad62e86ceea0d 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -1255,19 +1255,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 542718989d1fe1e813d93e2db993bea2222d824d..07cb10d359469f967173259fa2f83c57850ac9fc 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -1252,19 +1252,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index 520369a6f85de0c227047468ab8a441bed495fe4..f144b1ddb6132f7cd5e79044c2e300e69aefc035 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 834604a6332e012b5cbf8ea0f37b5513953d7c00..4dfeefb576b8fabb3bfc6e1f0ebbca490dba02cc 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -1259,19 +1259,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index cbf90f256209e06a651edd3867428e329c2bce23..91bddbf06f17f28263b14dfe2a4b0d3980be26b5 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 2f8f932b07dddba8140fd4185df297e808f98534..f250870d23966d58c6dbc7f1ee2e058c747a5538 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -1300,19 +1300,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 04d1bae81bd283ab3d78dff706a841e5cd9d6b94..39561c347b4637ab50044b5e25ae45fe57589c14 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index a160e8a07bf8c482ae3b7b7c5f0feff63b04d3c3..3a85d9f86d56a338d1c86cd05ff5793699817195 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -1249,19 +1249,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 99341e6eec9f7ef178a138b1ef227f5fca3b4567..64b2191134643d193b34805fbb38fcd6864a520c 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -1260,19 +1260,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index dba17c39b8f56539c1b7636fa90e0e9b284776b0..2f772633dfc7e13148a1d1b1f6d6e523822c4f86 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/STM32/STM32F103R/Configuration.h b/config/examples/STM32/STM32F103R/Configuration.h
index f36d9df7041b35d56c1d7359d0fdc69831964306..f31ac7831bfebf450f30289c52a1b5c7ec12fd84 100644
--- a/config/examples/STM32/STM32F103R/Configuration.h
+++ b/config/examples/STM32/STM32F103R/Configuration.h
@@ -1253,19 +1253,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 99e7a1fc73d56a4a34b1670275945792370ac0f6..2c303616f8de12c85174087366caa7183ce3ab57 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 460d8b0977d2e43bbe247c688a0c622212883dcd..16b6cd70205f9657bafabbfb5e001adc0a287c16 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -1253,19 +1253,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index 93a09df42a3dbe333d3821e6c30cc6a27f78d326..64b533ad9dbfe2071e0df76d7fc80f63fc999ab5 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -1282,19 +1282,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index 344d0d9670fc2cb6e246cc463a958aa9ad5c1652..4168fbe0fb358ccd3df4ada83ca845d726f2074c 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index 4ead70ff16c4ae473cb583312a77739ea11b59d3..c9876e93772faf31e880dbf47172aabd5ef1c7c9 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h
@@ -1249,19 +1249,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index c4a695522426395e2a60aa2ad555f459ed365841..2ae9e405c97c62cc4361fc3d675f27a7c75386f3 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
index 124e66d93701203e7698672b7cb48a0945e145a5..37401fdfdcdbb9dd65ec73fb84c809468706b491 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 7390f93829b1db7f8f28c3ca850b8c615b194c00..4286c6f8a4c88bdcf6146fdfaf8639cf96e4008b 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index e2439f045cbe5b750923201c0acaf4afdffc0999..78f5b78be613130c82ab2c0ac3e020afd556fbb6 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -1307,19 +1307,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index d1be9b3b496a561809eaf44983dead2bc81a7e81..5f3a4ce8238ab722cf1681b0052e3b338692cb0c 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index b54cf690695565fe4cfbb036d41436f1370f4522..75b15511136ad522e5fe6426660e90f970705518 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -1255,19 +1255,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index cc51f465eb8b9b63f93a98e8527276666fee079d..ce81d16bd176c8e5eb577a1e1c192320478f2d3c 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -1272,19 +1272,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 65c9ec39497d919281fb9ed6fde8b88152295c4e..0f468a7b4d876a04c135ee0fdaa8cbc7474e66ac 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index dd36e80209f31c5dc70f80db23696e799f44eee7..6152d482845c4f3b4d05dd0b6951631999ce8111 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -1262,19 +1262,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 89ca880455e399728052908287140322d6bde0e3..26b09c64bb39f350f7a3a31fe3748fa13d50c018 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index b56508e2f0736bf42decc5cfc1999538f47dce23..a6baaec3d6134d1a477b5e0b733d63f0919739a9 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 1532acddd872cb21e1897ee2373915ea2ba4a5e9..96abead88904c208f8f57175c1b8a7050471c4bf 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -1260,19 +1260,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 5fb409197ed08fa84cf640980e0b1ba59b67b3e2..4537da2122d555cbdfb2caf8eda04d7b3ddc25ce 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -1281,19 +1281,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index 14195d73ac8c2fb089890598a7aa8df1fd099594..7a16004c50128d4da61f0efc9c46298b17ddaf91 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 2c4355a9390508437bb5be9135f7f4d8e5234252..6b0ffb799851107e39a1078ae85549270a4fdf54 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 4ac36552f963f3fb8af9b6321416a95170c5a550..8e1e3ba1fb387a7dcf08b8923da12ff53a426aca 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -1270,19 +1270,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 704351a45af01500bed1020530c798432eaaf174..9bf46181bb0116fc9bbcee8c8d40f33060022ec5 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -1261,19 +1261,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index 37f88b457bda9d301330e231dbd7c8c4ae169ff3..6a256a95fb0de20e30fe58fa6e58661a8171bce1 100755
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index 25174cf7007601428e938619d6ba37837c17c582..8ed568a92deac93de081a484ba0a7807c5437e80 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -1251,19 +1251,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h
index f4cdcc0d2319006d2df9f876bbb2e13f9b0a54af..4bb023181d81167c0486b9e9928441b80edc5768 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h
@@ -1361,19 +1361,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
index bb66e3a0249e25fa112e5b134f7bbc142f717dd9..c69a173ed1c127f722e16e847b0a9df062ba0d67 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
@@ -1373,19 +1373,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 36ac9143bb6f4888125d8a80735ac4d646b1cfef..0fe1da99252c1388a7f636f87d8f442ce0380ca4 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -1366,19 +1366,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index bdfabc0068e5fd750a09e484f476eedf0dd5355f..74bd37da761eb83423dddae44fa52cb688e4ec6f 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -1365,19 +1365,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 3c379b4c71d4231960ea1e0255492a6d1359c876..5c81e5f1f86d1e7f5bfe2e3884ce4cbe6b1567f2 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -1365,19 +1365,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 9308fde289dcadbe47bc04804b30ec4b0adef7e6..1eedcf2e06ac3cd09a1c11bbe4741eb5bec21ecd 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -1353,19 +1353,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 8724606a083036564f7c44f84484a0dcb829c3f8..915c069efbf25919f1652e06cdaf5ecccf418b60 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -1353,19 +1353,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index 9a6aa048bcf2e226bc2a7d57ada81fcd61068ab5..1c894ce327a46e29285c29ac788389b06279bf5c 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -1357,19 +1357,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index b5656b333ad4b73a96b324a7ee0ac23206e5383c..34e68585ba2c8c7188ebf995031e03c163cacfb2 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -1353,19 +1353,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index dfaf41259c7fe9ac135a1f07179bcbcbe5fbb8ab..6f32e89d80c070c7adaddda6344cdf7d36fa196d 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -1355,19 +1355,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 1423db2adf28d768e73f5b39c7e2f3fca23fb3dd..8920710d8415f9964b943e9ce2c2280f0fccbc36 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -1355,19 +1355,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 4d19fdc90a8f68ad84a68cd240db19a130b3fbeb..2e11a8c99159341aa3b27d2c574602dd059ee49c 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -1356,19 +1356,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 3fe46fc03cef6822054ed626690d7bca23af0b57..4db20e066e66c82dfaaf42ab355fdc2293c51992 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -1254,19 +1254,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index b565511f3d59ec9cf6d2bafd763b785491788695..7c193cff3cc4a2b6ef3051c5deb7b534cc37e6b2 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -1246,19 +1246,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index ff6bba598e06e01ff522af464370e7b0b071fc37..ff3a7c38d2066e071500a738dce1e74a632a3e9d 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -1256,19 +1256,6 @@
#endif // BED_LEVELING
-/**
- * Points to probe for all 3-point Leveling procedures.
- * Override if the automatically selected points are inadequate.
- */
-#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
-#endif
-
/**
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.