diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index e916b1c0d196b5a9a60c72e6aa42d8438e6fb7a8..f036ef7b2d4f97bd99330c3eba679fe7b194830c 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index e916b1c0d196b5a9a60c72e6aa42d8438e6fb7a8..f036ef7b2d4f97bd99330c3eba679fe7b194830c 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 69e98af9036ce5bc964353e54cfeeb9f52d7c619..24cfdc4a08e298ce0361892a6021da78e483e2e4 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index bfeb7618dda4f0eef49d5c593941965e4499452e..07d4d29dd7577dc964267dd5a824878c00bbf3f4 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 11b6a69ae6658789340844abb35e151167302a7a..1b4bb4e35f8642f115d35e25c569b23e3a2c8656 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 7a2935b0a3d96f001e2a456dcbd941051dfd43eb..8ecb261df4a6fcf7bc7159d769fd211aab977a53 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -508,6 +508,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -582,22 +599,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
index 36efb6bfe605c27732cba8f7bb09e5ce2ea34261..e5a2b9f66b09bf1198880ea4edc185d85da94c97 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 84fec1e824e177da6f8e489701c9248287a1fd60..5245817c3837e7e132dba64a7fc3f2181c2c3e83 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index b29e62741d1a616eb288f8cd411bfc9f0b32a994..4925eea21d31e91b9c0292688f8b83192df6739d 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 84fec1e824e177da6f8e489701c9248287a1fd60..5245817c3837e7e132dba64a7fc3f2181c2c3e83 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index bf221649a18721cd3cf4a79f8f08d8de7690410b..900aea9490c2380c677a140edcbb5d4e11037bfd 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index fbb925f1f838707e244f10b1f9c192369cf89ce2..4a103d5fd78f17fce18dbbe19bd253dc2531190d 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index b9ddd70349a6c13c740fa53ea6aadb136e55a7ee..af30b2a2695cf81c536cc5161326cf88201026d3 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index d443d2dc412e3b9ecf393b72a12b24861d08c45f..331406ff2a97b3ad5717f32b2c85984698f80f9e 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -496,6 +496,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -570,22 +587,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
index 6fc9f337aa36a66322130c17668f55186e23605b..b6f9fe41e0093ce150435524e36d835ee0bfebe9 100644
--- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 0d801da1fe09ad1e533b9b38e018e3b7fe28490f..ac9aad23727e80265e3be7eeaa71eaad3e19e5f5 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 96f13ffd2c6bdf9109ba93bfdaaad1ce820839e2..8a4febbe595b20d6a5640cba420c53e8245a7b44 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ #define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- #define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 5c6d96d7fc0c0c972dd837d0bf912c5b8cf9f8e0..f215c91e3bc4da0b8e0f8801887f6635252de5b5 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index b02cabc981d9391422f81ca8638661c01083f404..1ce35ead0bd4b810fe3846e77076a5148f68b4e8 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 4743a0de8eeaf1974e2d0951584a8e84353fcfe7..45ef50a479b89ba6c1fb55e3d4d5d09f735d8aae 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index ad985d86e5f0f83e651214bc61f4d9b096ed99fc..22e383050cfd269f444af94d8487b128185dea0d 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index 567ddd5526631469d4e28e41b567317a13184e71..dada1cd6cdb2436615a46bcc0f5ba5c6030d0a1d 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 72330b0abfcd473fc0fffc754063f9768f7761cf..616095cb67e22782212c50cbca2831a7e6a2553e 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 8e66b778811a7540d12733882b3e18a063f0b596..887e6e8c380d9e22d1c1a99588a39c32ed6c75c5 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -508,6 +508,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -582,22 +599,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 3eb5ac70fcf9d334718163b07b249e2184f32f9a..2b655772daaa7ede7a475e1ee27fdd4bf99704f8 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index fc5ec71296280efff355c0d6a621a93f3810b21f..b3a6d92e6ffca4f5f38f35eccb3ef6d2c3ff054e 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index f4ef64b2d85ed72d451d2e17f12274eb6087ed1a..5848556d83d338a338e48a6f0e3ecc50cc940379 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 6a206dba90294ab3391302ca9c4f3022408292fc..8936f6290164951f100b369ffff3795589f9681a 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index e1ceb34f28b4343c6638c74fc0f8cf662c80ebfe..4e358ac4814b014d089169bfb958ea52c2c26100 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 0a6644e11344ff5c48f3428d58efa28c837b7ccf..95bb9939c53cd71589f093e2fa63c96767e76e0c 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index f6e585ee394b1615dc8d5ce9229c4daafd45c219..a6106428c94074e89bea9351057a5f08ee57c798 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -520,6 +520,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ #define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -594,22 +611,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- #define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 757b8859eeec1e1d15de2cdc7f8febe9353bd964..449e5fe23e34c399843fad843dcae592d5238f99 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index bf00e027ac6bdb027edc4173615773579ef59024..45a9a89025c2a5d4b7cfc63b735fa9374c9e730a 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 155c2912c46f28e3191d41fa7295e1776888511e..f20d6ef6cf4174a448f87fb3d739dd779a16d2fc 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 84c56751c1b9d1f2425d16f4429edf8be55c9679..d277acb2e4c6d952d348ea475f420f8eb1ed377a 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 3703cbad93f0bd1d312c3ae0b822d6a591c46621..3d0b99d8addb84f9338ae39ec453cab1bdb8b25b 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 3703cbad93f0bd1d312c3ae0b822d6a591c46621..3d0b99d8addb84f9338ae39ec453cab1bdb8b25b 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 3703cbad93f0bd1d312c3ae0b822d6a591c46621..3d0b99d8addb84f9338ae39ec453cab1bdb8b25b 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 4d4ee1b7255ec0da4dfef020cf7cb918fd86dac0..f51a99f3f5fec462822a016e7cd1c26dac17ebf5 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -514,6 +514,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -588,22 +605,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 6c4a8449f899b063c4d4edd3a1d97aa37b5879c4..3ba6e6e04b5fb65656c203d6f1d80b9afa0ff5e5 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -509,6 +509,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -583,22 +600,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index d25e240a72ad8365def0736f4d07e1aa24060dd6..93b4ac527c9237bc3fd643779ac90084ff9e2047 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index ab79ea66dd521b71ba72b257c649bc18eb50d15e..ba450fdffdcb5762557f8f6176a7b9ff19a70681 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 33e048c3e42819082b698f4fc5fac82263756ac3..4795a672bd522a0ff9144a7d86648ca5ece39fdf 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -507,6 +507,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -581,22 +598,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index 1d9bab31ac93527225e7abb8ae136e32cddd7fca..9b3c40046755d014a8306a1e32c7ce78a4fbc3a3 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -508,6 +508,23 @@
// Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ // Show a progress bar on HD44780 LCDs for SD printing
+ //#define LCD_PROGRESS_BAR
+ #if ENABLED(LCD_PROGRESS_BAR)
+ // Amount of time (ms) to show the bar
+ #define PROGRESS_BAR_BAR_TIME 2000
+ // Amount of time (ms) to show the status message
+ #define PROGRESS_BAR_MSG_TIME 3000
+ // Amount of time (ms) to retain the status message (0=forever)
+ #define PROGRESS_MSG_EXPIRE 0
+ // Enable this to show messages for MSG_TIME then hide them
+ //#define PROGRESS_MSG_ONCE
+ // Add a menu item to test the progress bar:
+ //#define LCD_PROGRESS_BAR_TEST
+ #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
/**
* LED Control Menu
* Enable this feature to add LED Control to the LCD menu
@@ -582,22 +599,6 @@
// Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
#endif
- // Show a progress bar on HD44780 LCDs for SD printing
- //#define LCD_PROGRESS_BAR
-
- #if ENABLED(LCD_PROGRESS_BAR)
- // Amount of time (ms) to show the bar
- #define PROGRESS_BAR_BAR_TIME 2000
- // Amount of time (ms) to show the status message
- #define PROGRESS_BAR_MSG_TIME 3000
- // Amount of time (ms) to retain the status message (0=forever)
- #define PROGRESS_MSG_EXPIRE 0
- // Enable this to show messages for MSG_TIME then hide them
- //#define PROGRESS_MSG_ONCE
- // Add a menu item to test the progress bar:
- //#define LCD_PROGRESS_BAR_TEST
- #endif
-
// This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT