diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h
index 2411500fb2b93e5029afd7564e47d9c08e8d231e..2db6b1bc0b92c97248c29340d1759e2266858631 100644
--- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h
+++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h
@@ -86,7 +86,7 @@
//
#define SDSS -1
#define LED_PIN -1
-#define CASE_LIGHT_PIN 8
+#define CASE_LIGHT_PIN PA8 // 8
#define PS_ON_PIN -1
#define KILL_PIN PD6 // LED strip 24v
@@ -111,8 +111,8 @@
//
// Temperature Sensors
//
-#define TEMP_BED_PIN PA0 // Analog Input
-#define TEMP_0_PIN PA1 // Analog Input
+#define TEMP_BED_PIN PA0 // Analog Input
+#define TEMP_0_PIN PA1 // Analog Input
#define TEMP_1_PIN -1 // Analog Input
#define TEMP_2_PIN -1 // Analog Input
@@ -122,9 +122,9 @@
#if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
- #define LCD_PINS_ENABLE 51 // SID (MOSI)
- #define LCD_PINS_D4 52 // SCK (CLK) clock
+ #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select
+ #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI)
+ #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2
@@ -140,13 +140,13 @@
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if DISABLED(NEWPANEL)
- #define BEEPER_PIN 33
+ #define BEEPER_PIN PC1 // 33
// Buttons attached to a shift register
// Not wired yet
- //#define SHIFT_CLK 38
- //#define SHIFT_LD 42
- //#define SHIFT_OUT 40
- //#define SHIFT_EN 17
+ //#define SHIFT_CLK PC6 // 38
+ //#define SHIFT_LD PC10 // 42
+ //#define SHIFT_OUT PC8 // 40
+ //#define SHIFT_EN PA1 // 17
#endif
#endif
@@ -154,125 +154,125 @@
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
- #define BEEPER_PIN 37
+ #define BEEPER_PIN PC5
- #define BTN_EN1 31
- #define BTN_EN2 33
- #define BTN_ENC 35
+ #define BTN_EN1 PB15 // 31
+ #define BTN_EN2 PC1 // 33
+ #define BTN_ENC PC3 // 35
- #define SD_DETECT_PIN 49
- #define KILL_PIN 41
+ #define SD_DETECT_PIN PD1 // 49
+ #define KILL_PIN PC9 // 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
- #define LCD_BACKLIGHT_PIN 39
+ #define LCD_BACKLIGHT_PIN PC7 // 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
- #define BTN_EN1 64
- #define BTN_EN2 59
- #define BTN_ENC 63
- #define SD_DETECT_PIN 42
+ #define BTN_EN1 PE0 // 64
+ #define BTN_EN2 PD11 // 59
+ #define BTN_ENC PD15 // 63
+ #define SD_DETECT_PIN PC10 // 42
#elif ENABLED(LCD_I2C_PANELOLU2)
- #define BTN_EN1 47
- #define BTN_EN2 43
- #define BTN_ENC 32
- #define LCD_SDSS 53
+ #define BTN_EN1 PC15 // 47
+ #define BTN_EN2 PC11 // 43
+ #define BTN_ENC PC0 // 32
+ #define LCD_SDSS PD5 // 53
#define SD_DETECT_PIN -1
- #define KILL_PIN 41
+ #define KILL_PIN PC9 // 41
#elif ENABLED(LCD_I2C_VIKI)
- #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
- #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
+ #define BTN_EN1 PB6 // 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+ #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
- #define LCD_SDSS 53
- #define SD_DETECT_PIN 49
+ #define LCD_SDSS PD5 // 53
+ #define SD_DETECT_PIN PD1 // 49
#elif ANY(VIKI2, miniVIKI)
- #define BEEPER_PIN 33
+ #define BEEPER_PIN PC1 // 33
// Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 44
- #define DOGLCD_CS 45
+ #define DOGLCD_A0 PC12 // 44
+ #define DOGLCD_CS PC13 // 45
#define LCD_SCREEN_ROT_180
- #define BTN_EN1 22
- #define BTN_EN2 7
- #define BTN_ENC 39
+ #define BTN_EN1 PB6 // 22
+ #define BTN_EN2 PA7 // 7
+ #define BTN_ENC PC7 // 39
- #define SDSS 53
+ #define SDSS PD5 // 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
- #define KILL_PIN 31
+ #define KILL_PIN PB15 // 31
- #define STAT_LED_RED_PIN 32
- #define STAT_LED_BLUE_PIN 35
+ #define STAT_LED_RED_PIN PC0 // 32
+ #define STAT_LED_BLUE_PIN PC3 // 35
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
- #define BTN_EN1 35
- #define BTN_EN2 37
- #define BTN_ENC 31
- #define SD_DETECT_PIN 49
- #define LCD_SDSS 53
- #define KILL_PIN 41
- #define BEEPER_PIN 23
- #define DOGLCD_CS 29
- #define DOGLCD_A0 27
- #define LCD_BACKLIGHT_PIN 33
+ #define BTN_EN1 PC3 // 35
+ #define BTN_EN2 PC5 // 37
+ #define BTN_ENC PB15 // 31
+ #define SD_DETECT_PIN PD1 // 49
+ #define LCD_SDSS PD5 // 53
+ #define KILL_PIN PC9 // 41
+ #define BEEPER_PIN PB7 // 23
+ #define DOGLCD_CS PB13 // 29
+ #define DOGLCD_A0 PB11 // 27
+ #define LCD_BACKLIGHT_PIN PC1 // 33
#elif ENABLED(MINIPANEL)
- #define BEEPER_PIN 42
+ #define BEEPER_PIN PC10 // 42
// Pins for DOGM SPI LCD Support
- #define DOGLCD_A0 44
- #define DOGLCD_CS 66
- #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
- #define SDSS 53
+ #define DOGLCD_A0 PC12 // 44
+ #define DOGLCD_CS PE2 // 66
+ #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65
+ #define SDSS PD5 // 53
- #define KILL_PIN 64
+ #define KILL_PIN PE0 // 64
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// The encoder and click button
- #define BTN_EN1 40
- #define BTN_EN2 63
- #define BTN_ENC 59
+ #define BTN_EN1 PC8 // 40
+ #define BTN_EN2 PD15 // 63
+ #define BTN_ENC PD11 // 59
// not connected to a pin
- #define SD_DETECT_PIN 49
+ #define SD_DETECT_PIN PD1 // 49
#else
// Beeper on AUX-4
- #define BEEPER_PIN 33
+ #define BEEPER_PIN PC1 // 33
// Buttons directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
- #define BTN_EN1 64
- #define BTN_EN2 59
- #define BTN_ENC 63
- #define SHIFT_OUT 40
- #define SHIFT_CLK 44
- #define SHIFT_LD 42
+ #define BTN_EN1 PE0 // 64
+ #define BTN_EN2 PD11 // 59
+ #define BTN_ENC PD15 // 63
+ #define SHIFT_OUT PC8 // 40
+ #define SHIFT_CLK PC12 // 44
+ #define SHIFT_LD PC10 // 42
#elif ENABLED(PANEL_ONE)
- #define BTN_EN1 59 // AUX2 PIN 3
- #define BTN_EN2 63 // AUX2 PIN 4
- #define BTN_ENC 49 // AUX3 PIN 7
+ #define BTN_EN1 PD11 // 59 // AUX2 PIN 3
+ #define BTN_EN2 PD15 // 63 // AUX2 PIN 4
+ #define BTN_ENC PD1 // 49 // AUX3 PIN 7
#else
- #define BTN_EN1 37
- #define BTN_EN2 35
- #define BTN_ENC 31
+ #define BTN_EN1 PC5 // 37
+ #define BTN_EN2 PC3 // 35
+ #define BTN_ENC PB15 // 31
#endif
#if ENABLED(G3D_PANEL)
- #define SD_DETECT_PIN 49
- #define KILL_PIN 41
+ #define SD_DETECT_PIN PD1 // 49
+ #define KILL_PIN PC9 // 41
#else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif