From e3c88a5120eed5eb334fe15352e450c433d73e97 Mon Sep 17 00:00:00 2001 From: Filip Mulier <filipmulier@q.com> Date: Sat, 16 Aug 2014 07:08:09 -0500 Subject: [PATCH] Filament sensor changes to config file Update the config file for improvements and clarifying what diameter to use in the slicer software. --- Marlin/Configuration.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 45c6ea4864..c877eec90a 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -770,14 +770,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define FILAMENT_SENSOR_EXTRUDER_NUM 0 //The number of the extruder that has the filament sensor (0,1,2) #define MEASUREMENT_DELAY_CM 14 //measurement delay in cm. This is the distance from filament sensor to middle of barrel -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm). Used for sensor reading validation +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software. Used for sensor reading validation #define MEASURED_UPPER_LIMIT 3.30 //upper limit factor used for sensor reading validation in mm #define MEASURED_LOWER_LIMIT 1.90 //lower limit factor for sensor reading validation in mm #define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially -#define STANDARD_DIA 1.12837915 //The diameter of filament that has a cross sectional area of 1 square mm. This dia should be used in the slicer software settings -- GitLab