diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h
index a70c449237f6cc02df32ecdc722ffa679bdb2404..18a3defd81e1505b65cdafb48fea2f2b00c095f2 100644
--- a/Marlin/Conditionals.h
+++ b/Marlin/Conditionals.h
@@ -610,35 +610,33 @@
     #define _XMAX_ 101
     #define _YMAX_ 201
     #define _ZMAX_ 301
-    const bool Z2_MAX_ENDSTOP_INVERTING =
-      #if Z2_USE_ENDSTOP == _XMAX_
-        X_MAX_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN X_MAX_PIN
-        #undef USE_XMAX_PLUG
-      #elif Z2_USE_ENDSTOP == _YMAX_
-        Y_MAX_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Y_MAX_PIN
-        #undef USE_YMAX_PLUG
-      #elif Z2_USE_ENDSTOP == _ZMAX_
-        Z_MAX_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Z_MAX_PIN
-        #undef USE_ZMAX_PLUG
-      #elif Z2_USE_ENDSTOP == _XMIN_
-        X_MIN_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN X_MIN_PIN
-        #undef USE_XMIN_PLUG
-      #elif Z2_USE_ENDSTOP == _YMIN_
-        Y_MIN_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Y_MIN_PIN
-        #undef USE_YMIN_PLUG
-      #elif Z2_USE_ENDSTOP == _ZMIN_
-        Z_MIN_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Z_MIN_PIN
-        #undef USE_ZMIN_PLUG
-      #else
-        0
-      #endif
-    ;
+    #if Z2_USE_ENDSTOP == _XMAX_
+      #define Z2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
+      #define Z2_MAX_PIN X_MAX_PIN
+      #undef USE_XMAX_PLUG
+    #elif Z2_USE_ENDSTOP == _YMAX_
+      #define Z2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
+      #define Z2_MAX_PIN Y_MAX_PIN
+      #undef USE_YMAX_PLUG
+    #elif Z2_USE_ENDSTOP == _ZMAX_
+      #define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
+      #define Z2_MAX_PIN Z_MAX_PIN
+      #undef USE_ZMAX_PLUG
+    #elif Z2_USE_ENDSTOP == _XMIN_
+      #define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
+      #define Z2_MAX_PIN X_MIN_PIN
+      #undef USE_XMIN_PLUG
+    #elif Z2_USE_ENDSTOP == _YMIN_
+      #define Z2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
+      #define Z2_MAX_PIN Y_MIN_PIN
+      #undef USE_YMIN_PLUG
+    #elif Z2_USE_ENDSTOP == _ZMIN_
+      #define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
+      #define Z2_MAX_PIN Z_MIN_PIN
+      #undef USE_ZMIN_PLUG
+    #else
+      #define Z2_MAX_ENDSTOP_INVERTING false
+    #endif
   #endif
 
   /**
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 0a6d774171267426be92705032ea5ead66bbf6e7..10173f97e701bbe5140b5431527475faeed5fc89 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -437,13 +437,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index 5d23fb5373184608690a4306214873e615712c3e..07172d60840a208524be9b4221f7f647cb1a30f7 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -437,13 +437,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 2bb499f0c9458e39189ac448c1673aa91a14dd01..0951d1b9aec1afa7d1785d0568896817ddedc4c9 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -419,13 +419,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index 5fc495f246b69e5d3d27e5604c0cd64b219ce78b..78c7e5045f41d950cca0bd45d6cab036d2d717e9 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -417,13 +417,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index fa58bb394e5b3e998a4659593f6af6c6cffacef4..60431e93aac00c48f8f96934e2b5eb47a9d06b3c 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -429,13 +429,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index ebdd18cb387a9563f38e47a9dd538719b9f50086..e70988552d55e521b70c69179a1d23c23c34b85c 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -431,13 +431,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true;  // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true;  // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true;  // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true;  // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true;  // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index c20173daf7436ed7a20c406a65df04be4b493951..289f16ce1c0ee6c71720eacd465549fc678793e6 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -454,13 +454,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index e9e7a6b54df7835424091a320502309aa44ad64b..edf8466a823125bb25e4639f3768ede3f7512375 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -414,13 +414,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index 48f7f6008d6bfe71ad45ff7c06362e9596375e6b..1e1e2ce9ca087cf2f279e7a3791e025edab4170c 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -414,13 +414,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 11a5a07f715dde3c16a7811942179b3c0e646b91..158dc950ccd50a9f3569c1f002b3690329f4018c 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -437,13 +437,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index c080bd9fc8ac3660cd8bd3c435f2daa45feccb32..e97b60bfa26b42d4f2b930b292ae466540bce12e 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -434,13 +434,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 7a9f0d37c015aba38fadf4cb0317aa1cf3364a45..fecfa05153cf17d108de23c792bf732f7124b8a8 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -445,13 +445,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index f51bc4841e7c6f7f4bf7f7944578b3851d9d9ed0..1509de3a0ccbf9f51007e7d28c4bda69766bc0c8 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -458,13 +458,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 5abe59e1cf9d1991592975b521c1d5da6bdb1842..5470f361e3e848799da414fb8d547ec9c5ff2073 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -429,13 +429,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 9f3fa954a06be75eb404ed210e89debae4ed01a1..59f37347ed429cf558154ab209048163ce4bf56e 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -437,13 +437,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index d599e9a508e44f21cb11216aa9bd755d49a9c02f..c916957db5d713ffc65364c56f0c2bf6103cc895 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -479,13 +479,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index cf5e08126b004fc24aa53ee808c739756ae7b8d9..a27eab20358a0ece9f4138d2e4d5d5a7b634c0fa 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -479,13 +479,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index f2fdc54b04f3a5786bfd62efc72e0650d1394d1b..aabf9a8e15d4276803e2972c8a1da2ee8d5dfcd3 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -479,13 +479,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index aca8ede55d8d49da3fa9f5fe3422e0fd5d21fb2a..5c390a5730d0d88b929bcc09bcee7222900ebcb7 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -468,13 +468,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index b59312fce7e9e45287db91d8cb446b9a1dd90112..df483309a47eb9c7e1ee54008ac52a8155650963 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -477,13 +477,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 4d05e5cb78cb49ea34a24babaaf2a592cc67124c..c3d6cb8c830140a4b39b39f7b2278071188c4347 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -440,13 +440,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 787de288b72538ec050789f56c32e71b1bdbb75d..d2bbc6c708f00ab4f590040ed42ee8bba11622c7 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -427,13 +427,13 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
-const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 
 //===========================================================================
 //============================= Z Probe Options =============================