From d7d80418aedad1c89e27fcba6aab9aa48187b5cc Mon Sep 17 00:00:00 2001
From: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Thu, 27 Jun 2019 23:06:49 -0500
Subject: [PATCH] Singleton for cutting tools (#14429)
---
Marlin/Configuration_adv.h | 52 ++++----
Marlin/src/HAL/HAL_AVR/SanityCheck.h | 66 ++--------
Marlin/src/HAL/HAL_LINUX/SanityCheck.h | 47 +------
Marlin/src/HAL/HAL_LPC1768/SanityCheck.h | 46 +------
Marlin/src/HAL/HAL_STM32/SanityCheck.h | 46 +------
Marlin/src/HAL/HAL_STM32F1/SanityCheck.h | 45 +------
Marlin/src/HAL/HAL_STM32F4/SanityCheck.h | 46 +------
Marlin/src/HAL/HAL_STM32F7/SanityCheck.h | 48 +------
Marlin/src/Marlin.cpp | 15 +--
Marlin/src/feature/spindle_laser.cpp | 99 ++++++++++++++
Marlin/src/feature/spindle_laser.h | 83 ++++++++++++
Marlin/src/gcode/control/M3-M5.cpp | 124 +++---------------
Marlin/src/gcode/gcode.cpp | 2 +-
Marlin/src/gcode/gcode.h | 8 +-
Marlin/src/inc/Conditionals_adv.h | 2 +
Marlin/src/inc/Conditionals_post.h | 2 +-
Marlin/src/inc/SanityCheck.h | 70 +++++++++-
Marlin/src/lcd/language/language_en.h | 12 ++
Marlin/src/lcd/menu/menu.cpp | 3 +-
Marlin/src/lcd/menu/menu.h | 11 +-
Marlin/src/lcd/menu/menu_main.cpp | 9 ++
Marlin/src/lcd/menu/menu_spindle_laser.cpp | 54 ++++++++
Marlin/src/lcd/menu/menu_temperature.cpp | 46 -------
Marlin/src/libs/numtostr.cpp | 23 ++--
Marlin/src/libs/numtostr.h | 7 +-
Marlin/src/pins/pins_3DRAG.h | 2 +-
Marlin/src/pins/pins_AZTEEG_X3.h | 2 +-
Marlin/src/pins/pins_AZTEEG_X3_PRO.h | 2 +-
Marlin/src/pins/pins_COHESION3D_MINI.h | 2 +-
Marlin/src/pins/pins_COHESION3D_REMIX.h | 2 +-
Marlin/src/pins/pins_FORMBOT_RAPTOR2.h | 2 +-
Marlin/src/pins/pins_MINITRONICS.h | 2 +-
Marlin/src/pins/pins_RAMPS.h | 10 +-
Marlin/src/pins/pins_RAMPS_FD_V1.h | 2 +-
Marlin/src/pins/pins_RAMPS_LINUX.h | 2 +-
Marlin/src/pins/pins_RAMPS_RE_ARM.h | 8 +-
Marlin/src/pins/pins_SANGUINOLOLU_11.h | 6 +-
Marlin/src/pins/pins_STM3R_MINI.h | 2 +-
Marlin/src/pins/pins_ULTIMAIN_2.h | 2 +-
Marlin/src/pins/pins_ULTIMAKER_OLD.h | 8 +-
Marlin/src/pins/pins_Z_BOLT_X_SERIES.h | 2 +-
buildroot/share/tests/megaatmega2560-tests | 6 +-
config/default/Configuration_adv.h | 52 ++++----
.../3DFabXYZ/Migbot/Configuration_adv.h | 52 ++++----
.../AlephObjects/TAZ4/Configuration_adv.h | 52 ++++----
.../AliExpress/UM2pExt/Configuration_adv.h | 52 ++++----
config/examples/Anet/A2/Configuration_adv.h | 52 ++++----
.../examples/Anet/A2plus/Configuration_adv.h | 52 ++++----
config/examples/Anet/A6/Configuration_adv.h | 52 ++++----
config/examples/Anet/A8/Configuration_adv.h | 52 ++++----
.../examples/Anet/A8plus/Configuration_adv.h | 52 ++++----
config/examples/Anet/E16/Configuration_adv.h | 52 ++++----
.../examples/AnyCubic/i3/Configuration_adv.h | 52 ++++----
config/examples/ArmEd/Configuration_adv.h | 52 ++++----
.../BIBO/TouchX/cyclops/Configuration_adv.h | 52 ++++----
.../BIBO/TouchX/default/Configuration_adv.h | 52 ++++----
.../examples/BQ/Hephestos/Configuration_adv.h | 52 ++++----
.../BQ/Hephestos_2/Configuration_adv.h | 52 ++++----
config/examples/BQ/WITBOX/Configuration_adv.h | 52 ++++----
config/examples/Cartesio/Configuration_adv.h | 52 ++++----
.../Creality/CR-10/Configuration_adv.h | 52 ++++----
.../Creality/CR-10S/Configuration_adv.h | 52 ++++----
.../Creality/CR-10_5S/Configuration_adv.h | 52 ++++----
.../Creality/CR-10mini/Configuration_adv.h | 52 ++++----
.../Creality/CR-8/Configuration_adv.h | 52 ++++----
.../Creality/Ender-2/Configuration_adv.h | 52 ++++----
.../Creality/Ender-3/Configuration_adv.h | 52 ++++----
.../Creality/Ender-4/Configuration_adv.h | 52 ++++----
.../Dagoma/Disco Ultimate/Configuration_adv.h | 52 ++++----
.../Sidewinder X1/Configuration_adv.h | 52 ++++----
.../examples/Einstart-S/Configuration_adv.h | 52 ++++----
config/examples/Felix/Configuration_adv.h | 52 ++++----
.../FlashForge/CreatorPro/Configuration_adv.h | 52 ++++----
.../FolgerTech/i3-2020/Configuration_adv.h | 52 ++++----
.../Formbot/Raptor/Configuration_adv.h | 52 ++++----
.../Formbot/T_Rex_2+/Configuration_adv.h | 52 ++++----
.../Formbot/T_Rex_3/Configuration_adv.h | 52 ++++----
.../Fysetc/AIO_II/Configuration_adv.h | 52 ++++----
.../Fysetc/CHEETAH/Configuration_adv.h | 52 ++++----
.../examples/Fysetc/F6_13/Configuration_adv.h | 52 ++++----
.../examples/Geeetech/A10/Configuration_adv.h | 52 ++++----
.../Geeetech/A10M/Configuration_adv.h | 52 ++++----
.../Geeetech/A20M/Configuration_adv.h | 52 ++++----
.../Geeetech/MeCreator2/Configuration_adv.h | 52 ++++----
.../Prusa i3 Pro C/Configuration_adv.h | 52 ++++----
.../Prusa i3 Pro W/Configuration_adv.h | 52 ++++----
.../Infitary/i3-M508/Configuration_adv.h | 52 ++++----
.../examples/JGAurora/A1/Configuration_adv.h | 52 ++++----
.../examples/JGAurora/A5/Configuration_adv.h | 52 ++++----
.../examples/JGAurora/A5S/Configuration_adv.h | 52 ++++----
.../examples/MakerParts/Configuration_adv.h | 52 ++++----
.../examples/Malyan/M150/Configuration_adv.h | 52 ++++----
.../examples/Malyan/M200/Configuration_adv.h | 52 ++++----
.../Micromake/C1/enhanced/Configuration_adv.h | 52 ++++----
config/examples/Mks/Robin/Configuration_adv.h | 52 ++++----
config/examples/Mks/Sbase/Configuration_adv.h | 52 ++++----
.../RapideLite/RL200/Configuration_adv.h | 52 ++++----
config/examples/RigidBot/Configuration_adv.h | 52 ++++----
config/examples/SCARA/Configuration_adv.h | 52 ++++----
.../Black_STM32F407VET6/Configuration_adv.h | 52 ++++----
.../examples/Sanguinololu/Configuration_adv.h | 52 ++++----
.../Tevo/Tarantula Pro/Configuration_adv.h | 52 ++++----
config/examples/TheBorg/Configuration_adv.h | 52 ++++----
config/examples/TinyBoy2/Configuration_adv.h | 52 ++++----
.../examples/Tronxy/X3A/Configuration_adv.h | 52 ++++----
.../Tronxy/X5S-2E/Configuration_adv.h | 52 ++++----
.../UltiMachine/Archim1/Configuration_adv.h | 52 ++++----
.../UltiMachine/Archim2/Configuration_adv.h | 52 ++++----
.../examples/VORONDesign/Configuration_adv.h | 52 ++++----
.../Velleman/K8200/Configuration_adv.h | 52 ++++----
.../Velleman/K8400/Configuration_adv.h | 52 ++++----
.../WASP/PowerWASP/Configuration_adv.h | 52 ++++----
.../Wanhao/Duplicator 6/Configuration_adv.h | 52 ++++----
.../delta/Anycubic/Kossel/Configuration_adv.h | 52 ++++----
.../FLSUN/auto_calibrate/Configuration_adv.h | 52 ++++----
.../delta/FLSUN/kossel/Configuration_adv.h | 52 ++++----
.../FLSUN/kossel_mini/Configuration_adv.h | 52 ++++----
.../Geeetech/Rostock 301/Configuration_adv.h | 52 ++++----
.../delta/MKS/SBASE/Configuration_adv.h | 52 ++++----
.../Tevo Little Monster/Configuration_adv.h | 52 ++++----
.../delta/generic/Configuration_adv.h | 52 ++++----
.../delta/kossel_mini/Configuration_adv.h | 52 ++++----
.../delta/kossel_xl/Configuration_adv.h | 52 ++++----
.../gCreate/gMax1.5+/Configuration_adv.h | 52 ++++----
config/examples/makibox/Configuration_adv.h | 52 ++++----
.../tvrrug/Round2/Configuration_adv.h | 52 ++++----
config/examples/wt150/Configuration_adv.h | 52 ++++----
127 files changed, 2773 insertions(+), 2675 deletions(-)
create mode 100644 Marlin/src/feature/spindle_laser.cpp
create mode 100644 Marlin/src/feature/spindle_laser.h
create mode 100644 Marlin/src/lcd/menu/menu_spindle_laser.cpp
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 8339e7ab74..454bcbe20f 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/Marlin/src/HAL/HAL_AVR/SanityCheck.h b/Marlin/src/HAL/HAL_AVR/SanityCheck.h
index 68bfdc16a0..3bcd2f7c20 100644
--- a/Marlin/src/HAL/HAL_AVR/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_AVR/SanityCheck.h
@@ -22,7 +22,7 @@
#pragma once
/**
- * Test AVR specific configuration values for errors at compile-time.
+ * Test AVR-specific configuration values for errors at compile-time.
*/
/**
@@ -43,65 +43,15 @@
#endif
/**
- * Sanity checks for Spindle / Laser
+ * Sanity checks for Spindle / Laser PWM
*/
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !(WITHIN(SPINDLE_LASER_PWM_PIN, 2, 13) || WITHIN(SPINDLE_LASER_PWM_PIN, 44, 46))
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
- #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
- #elif PIN_EXISTS(X_MAX) && X_MAX_PIN == SPINDLE_LASER_PWM_PIN
- #error "SPINDLE_LASER_PWM pin is in use by X_MAX endstop."
- #elif PIN_EXISTS(X_MIN) && X_MIN_PIN == SPINDLE_LASER_PWM_PIN
- #error "SPINDLE_LASER_PWM pin is in use by X_MIN endstop."
- #elif PIN_EXISTS(Z_STEP) && Z_STEP_PIN == SPINDLE_LASER_PWM_PIN
- #error "SPINDLE_LASER_PWM pin in use by Z_STEP."
- #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
- #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E5_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E5_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E5_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_XY."
- #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_Z_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_Z."
- #elif PIN_EXISTS(MOTOR_CURRENT_PWM_E) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_E_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by MOTOR_CURRENT_PWM_E."
- #endif
+#if ENABLED(SPINDLE_LASER_PWM)
+ #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
+ #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
+ #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+ #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
#endif
-#endif // SPINDLE_LASER_ENABLE
+#endif
/**
* The Trinamic library includes SoftwareSerial.h, leading to a compile error.
diff --git a/Marlin/src/HAL/HAL_LINUX/SanityCheck.h b/Marlin/src/HAL/HAL_LINUX/SanityCheck.h
index 0b4322512f..bb65bed6cc 100644
--- a/Marlin/src/HAL/HAL_LINUX/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_LINUX/SanityCheck.h
@@ -21,50 +21,13 @@
*/
/**
- * Test X86_64 configuration values for errors at compile-time.
+ * Test X86_64-specific configuration values for errors at compile-time.
*/
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
- #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #endif
- #endif
-#endif // SPINDLE_LASER_ENABLE
+// Emulating RAMPS
+#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+ #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+#endif
#if ENABLED(FAST_PWM_FAN)
#error "FAST_PWM_FAN is not yet implemented for this platform."
diff --git a/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h b/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
index c0ba833f25..4813be28f7 100644
--- a/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
@@ -21,50 +21,12 @@
*/
/**
- * Test Re-ARM specific configuration values for errors at compile-time.
+ * Test LPC176x-specific configuration values for errors at compile-time.
*/
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
- #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #endif
- #endif
-#endif // SPINDLE_LASER_ENABLE
+//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+//#endif
#if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
#error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI"
diff --git a/Marlin/src/HAL/HAL_STM32/SanityCheck.h b/Marlin/src/HAL/HAL_STM32/SanityCheck.h
index 6c6ede24b4..8188c87471 100644
--- a/Marlin/src/HAL/HAL_STM32/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_STM32/SanityCheck.h
@@ -22,49 +22,11 @@
#pragma once
/**
- * Test Re-ARM specific configuration values for errors at compile-time.
+ * Test STM32-specific configuration values for errors at compile-time.
*/
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
- #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #endif
- #endif
-#endif // SPINDLE_LASER_ENABLE
+//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+//#endif
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32. Disable EMERGENCY_PARSER to continue."
diff --git a/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h b/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
index c1470ca51e..483ee9f393 100644
--- a/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
@@ -21,52 +21,9 @@
*/
/**
- * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ * Test STM32F1-specific configuration values for errors at compile-time.
*/
-/**
- * Test Re-ARM specific configuration values for errors at compile-time.
- */
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif SPINDLE_LASER_POWERUP_DELAY < 0
- #error "SPINDLE_LASER_POWERUP_DELAY must be positive"
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 0
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be positive"
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #endif
- #endif
-#endif // SPINDLE_LASER_ENABLE
-
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F1. Disable EMERGENCY_PARSER to continue."
#endif
diff --git a/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h b/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h
index 441daf9257..7b1629bb28 100644
--- a/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_STM32F4/SanityCheck.h
@@ -21,49 +21,11 @@
*/
/**
- * Test Re-ARM specific configuration values for errors at compile-time.
+ * Test STM32F4-specific configuration values for errors at compile-time.
*/
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
- #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #endif
- #endif
-#endif // SPINDLE_LASER_ENABLE
+//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+//#endif
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F4. Disable EMERGENCY_PARSER to continue."
diff --git a/Marlin/src/HAL/HAL_STM32F7/SanityCheck.h b/Marlin/src/HAL/HAL_STM32F7/SanityCheck.h
index 8ba1f870c2..cb999ef97d 100644
--- a/Marlin/src/HAL/HAL_STM32F7/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_STM32F7/SanityCheck.h
@@ -21,51 +21,11 @@
*/
/**
- * Test Re-ARM specific configuration values for errors at compile-time.
+ * Test STM32F7-specific configuration values for errors at compile-time.
*/
-#if ENABLED(SPINDLE_LASER_ENABLE)
- #if !PIN_EXISTS(SPINDLE_LASER_ENA)
- #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
- #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
- #error "SPINDLE_DIR_PIN not defined."
- #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
- #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
- #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
- #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
- #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
- #elif SPINDLE_LASER_POWERUP_DELAY < 1
- #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
- #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
- #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
- #elif !defined(SPINDLE_LASER_PWM_INVERT)
- #error "SPINDLE_LASER_PWM_INVERT missing."
- #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
- #error "SPINDLE_LASER_PWM equation constant(s) missing."
- #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
- #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
- #elif PIN_EXISTS(E5_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E5_AUTO_FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by E5_AUTO_FAN_PIN."
- #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
- #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
- #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
- #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
- #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
- #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
- #endif
- #endif
-#endif // SPINDLE_LASER_ENABLE
+//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+//#endif
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F7. Disable EMERGENCY_PARSER to continue."
diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 4ec88d8aef..cd02fc38e9 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -106,6 +106,10 @@
#include "feature/tmc_util.h"
#endif
+#if HAS_CUTTER
+ #include "feature/spindle_laser.h"
+#endif
+
#if ENABLED(SDSUPPORT)
CardReader card;
#endif
@@ -967,15 +971,8 @@ void setup() {
OUT_WRITE(PHOTOGRAPH_PIN, LOW);
#endif
- #if ENABLED(SPINDLE_LASER_ENABLE)
- OUT_WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ENABLE_INVERT); // init spindle to off
- #if SPINDLE_DIR_CHANGE
- OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // init rotation to clockwise (M3)
- #endif
- #if ENABLED(SPINDLE_LASER_PWM) && defined(SPINDLE_LASER_PWM_PIN) && SPINDLE_LASER_PWM_PIN >= 0
- SET_PWM(SPINDLE_LASER_PWM_PIN);
- analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // set to lowest speed
- #endif
+ #if HAS_CUTTER
+ cutter.init();
#endif
#if ENABLED(COOLANT_MIST)
diff --git a/Marlin/src/feature/spindle_laser.cpp b/Marlin/src/feature/spindle_laser.cpp
new file mode 100644
index 0000000000..8c0316c785
--- /dev/null
+++ b/Marlin/src/feature/spindle_laser.cpp
@@ -0,0 +1,99 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * feature/spindle_laser.cpp
+ */
+
+#include "../inc/MarlinConfig.h"
+
+#if HAS_CUTTER
+
+#include "spindle_laser.h"
+
+SpindleLaser cutter;
+
+cutter_power_t SpindleLaser::power; // = 0
+
+void SpindleLaser::init() {
+ OUT_WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Init spindle to off
+ #if ENABLED(SPINDLE_CHANGE_DIR)
+ OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // Init rotation to clockwise (M3)
+ #endif
+ #if ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
+ SET_PWM(SPINDLE_LASER_PWM_PIN);
+ analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // set to lowest speed
+ #endif
+}
+
+#if ENABLED(SPINDLE_LASER_PWM)
+
+ /**
+ * ocr_val_mode() is used for debugging and to get the points needed to compute the RPM vs ocr_val line
+ *
+ * it accepts inputs of 0-255
+ */
+ void SpindleLaser::set_ocr(const uint8_t ocr) {
+ WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ACTIVE_HIGH); // turn spindle on (active low)
+ #if ENABLED(SPINDLE_LASER_PWM)
+ analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
+ #endif
+ }
+
+#endif
+
+void SpindleLaser::update_output() {
+ const bool ena = enabled();
+ #if ENABLED(SPINDLE_LASER_PWM)
+ if (ena) {
+ constexpr float inv_slope = RECIPROCAL(SPEED_POWER_SLOPE),
+ min_ocr = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * inv_slope, // Minimum allowed
+ max_ocr = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * inv_slope; // Maximum allowed
+ int16_t ocr_val;
+ if (power <= SPEED_POWER_MIN) ocr_val = min_ocr; // Use minimum if set below
+ else if (power >= SPEED_POWER_MAX) ocr_val = max_ocr; // Use maximum if set above
+ else ocr_val = (power - (SPEED_POWER_INTERCEPT)) * inv_slope; // Use calculated OCR value
+ set_ocr(ocr_val & 0xFF); // ...limited to Atmel PWM max
+ }
+ else { // Convert RPM to PWM duty cycle
+ WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Turn spindle off (active low)
+ analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // Only write low byte
+ }
+ #else
+ WRITE(SPINDLE_LASER_ENA_PIN, ena ? SPINDLE_LASER_ACTIVE_HIGH : !SPINDLE_LASER_ACTIVE_HIGH);
+ #endif
+ power_delay(ena);
+}
+
+#if ENABLED(SPINDLE_CHANGE_DIR)
+
+ void SpindleLaser::set_direction(const bool reverse) {
+ const bool dir_state = (reverse == SPINDLE_INVERT_DIR); // Forward (M3) HIGH when not inverted
+ #if ENABLED(SPINDLE_STOP_ON_DIR_CHANGE)
+ if (enabled() && READ(SPINDLE_DIR_PIN) != dir_state) disable();
+ #endif
+ WRITE(SPINDLE_DIR_PIN, dir_state);
+ }
+
+#endif
+
+#endif // HAS_CUTTER
diff --git a/Marlin/src/feature/spindle_laser.h b/Marlin/src/feature/spindle_laser.h
new file mode 100644
index 0000000000..cb514d5f3e
--- /dev/null
+++ b/Marlin/src/feature/spindle_laser.h
@@ -0,0 +1,83 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * feature/spindle_laser.h
+ * Support for Laser Power or Spindle Power & Direction
+ */
+
+#include "../inc/MarlinConfig.h"
+
+#if ENABLED(SPINDLE_FEATURE)
+ #define _MSG_CUTTER(M) MSG_SPINDLE_##M
+#else
+ #define _MSG_CUTTER(M) MSG_LASER_##M
+#endif
+#define MSG_CUTTER(M) _MSG_CUTTER(M)
+
+#if SPEED_POWER_MAX > 255
+ #define cutter_power_t uint16_t
+ #define CUTTER_MENU_TYPE uint16_5
+#else
+ #define cutter_power_t uint8_t
+ #define CUTTER_MENU_TYPE uint8
+#endif
+
+class SpindleLaser {
+public:
+ static cutter_power_t power;
+
+ static void init();
+
+ static inline bool enabled() { return !!power; }
+
+ static inline void set_power(const uint8_t pwr) { power = pwr; update_output(); }
+
+ static inline void set_enabled(const bool enable) { set_power(enable ? 255 : 0); }
+
+ //static bool active() { return READ(SPINDLE_LASER_ENA_PIN) == SPINDLE_LASER_ACTIVE_HIGH; }
+
+ #if ENABLED(SPINDLE_LASER_PWM)
+ static void update_output();
+ static void set_ocr(const uint8_t ocr);
+ static inline void set_ocr_power(const uint8_t pwr) { power = pwr; set_ocr(pwr); }
+ #else
+ static inline void update_output() { }
+ #endif
+
+ // Wait for spindle to spin up or spin down
+ static inline void power_delay(const bool on) { safe_delay(on ? SPINDLE_LASER_POWERUP_DELAY : SPINDLE_LASER_POWERDOWN_DELAY); }
+
+ #if ENABLED(SPINDLE_CHANGE_DIR)
+ static void set_direction(const bool reverse);
+ #else
+ static inline void set_direction(const bool reverse) { UNUSED(reverse); }
+ #endif
+
+ static inline void disable() { set_enabled(false); }
+ static inline void enable_forward() { set_direction(false); set_enabled(true); }
+ static inline void enable_reverse() { set_direction(true); set_enabled(true); }
+
+};
+
+extern SpindleLaser cutter;
diff --git a/Marlin/src/gcode/control/M3-M5.cpp b/Marlin/src/gcode/control/M3-M5.cpp
index 132f7bb399..6b8497ea40 100644
--- a/Marlin/src/gcode/control/M3-M5.cpp
+++ b/Marlin/src/gcode/control/M3-M5.cpp
@@ -22,23 +22,23 @@
#include "../../inc/MarlinConfig.h"
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#include "../gcode.h"
+#include "../../feature/spindle_laser.h"
#include "../../module/stepper.h"
-uint8_t spindle_laser_power; // = 0
-
/**
- * M3: Spindle Clockwise
- * M4: Spindle Counter-clockwise
+ * M3 - Cutter ON (Clockwise)
+ * M4 - Cutter ON (Counter-clockwise)
*
- * S0 turns off spindle.
+ * S<power> - Set power. S0 turns it off.
+ * O<ocr> - Set power and OCR
*
- * If no speed PWM output is defined then M3/M4 just turns it on.
+ * If no PWM pin is defined then M3/M4 just turns it on.
*
- * At least 12.8KHz (50Hz * 256) is needed for spindle PWM.
- * Hardware PWM is required. ISRs are too slow.
+ * At least 12.8KHz (50Hz * 256) is needed for Spindle PWM.
+ * Hardware PWM is required on AVR. ISRs are too slow.
*
* NOTE: WGM for timers 3, 4, and 5 must be either Mode 1 or Mode 5.
* No other settings give a PWM signal that goes from 0 to 5 volts.
@@ -59,114 +59,28 @@ uint8_t spindle_laser_power; // = 0
*
* PWM duty cycle goes from 0 (off) to 255 (always on).
*/
-
-// Wait for spindle to come up to speed
-inline void delay_for_power_up() { safe_delay(SPINDLE_LASER_POWERUP_DELAY); }
-
-// Wait for spindle to stop turning
-inline void delay_for_power_down() { safe_delay(SPINDLE_LASER_POWERDOWN_DELAY); }
-
-/**
- * ocr_val_mode() is used for debugging and to get the points needed to compute the RPM vs ocr_val line
- *
- * it accepts inputs of 0-255
- */
-
-inline void set_spindle_laser_ocr(const uint8_t ocr) {
- WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low)
- #if ENABLED(SPINDLE_LASER_PWM)
- analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
- #endif
-}
-
-#if ENABLED(SPINDLE_LASER_PWM)
-
- void update_spindle_laser_power() {
- if (spindle_laser_power == 0) {
- WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ENABLE_INVERT); // turn spindle off (active low)
- analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // only write low byte
- delay_for_power_down();
- }
- else { // Convert RPM to PWM duty cycle
- constexpr float inv_slope = 1.0f / (SPEED_POWER_SLOPE),
- min_ocr = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * inv_slope, // Minimum allowed
- max_ocr = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * inv_slope; // Maximum allowed
- int16_t ocr_val;
- if (spindle_laser_power <= SPEED_POWER_MIN) ocr_val = min_ocr; // Use minimum if set below
- else if (spindle_laser_power >= SPEED_POWER_MAX) ocr_val = max_ocr; // Use maximum if set above
- else ocr_val = (spindle_laser_power - (SPEED_POWER_INTERCEPT)) * inv_slope; // Use calculated OCR value
- set_spindle_laser_ocr(ocr_val & 0xFF); // ...limited to Atmel PWM max
- delay_for_power_up();
- }
- }
-
-#endif // SPINDLE_LASER_PWM
-
-bool spindle_laser_enabled() {
- return !!spindle_laser_power; // READ(SPINDLE_LASER_ENA_PIN) == SPINDLE_LASER_ENABLE_INVERT;
-}
-
-void set_spindle_laser_enabled(const bool enable) {
- // Enabled by PWM setting elsewhere
- spindle_laser_power = enable ? 255 : 0;
- #if ENABLED(SPINDLE_LASER_PWM)
- update_spindle_laser_power();
- #else
- if (enable) {
- WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT);
- delay_for_power_up();
- }
- else {
- WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ENABLE_INVERT);
- delay_for_power_down();
- }
- #endif
-}
-
-#if SPINDLE_DIR_CHANGE
-
- void set_spindle_direction(const bool reverse_dir) {
- const bool dir_state = (reverse_dir == SPINDLE_INVERT_DIR); // Forward (M3) HIGH when not inverted
- if (SPINDLE_STOP_ON_DIR_CHANGE && spindle_laser_enabled() && READ(SPINDLE_DIR_PIN) != dir_state)
- set_spindle_laser_enabled(false);
- WRITE(SPINDLE_DIR_PIN, dir_state);
- }
-
-#endif
-
void GcodeSuite::M3_M4(const bool is_M4) {
- planner.synchronize(); // wait until previous movement commands (G0/G0/G2/G3) have completed before playing with the spindle
+ planner.synchronize(); // Wait for previous movement commands (G0/G0/G2/G3) to complete before changing power
- #if SPINDLE_DIR_CHANGE
- set_spindle_direction(is_M4);
- #endif
+ cutter.set_direction(is_M4);
- /**
- * Our final value for ocr_val is an unsigned 8 bit value between 0 and 255 which usually means uint8_t.
- * Went to uint16_t because some of the uint8_t calculations would sometimes give 1000 0000 rather than 1111 1111.
- * Then needed to AND the uint16_t result with 0x00FF to make sure we only wrote the byte of interest.
- */
#if ENABLED(SPINDLE_LASER_PWM)
- if (parser.seen('O')) {
- spindle_laser_power = parser.value_byte();
- set_spindle_laser_ocr(spindle_laser_power);
- }
- else {
- spindle_laser_power = parser.intval('S', 255);
- update_spindle_laser_power();
- }
+ if (parser.seen('O'))
+ cutter.set_ocr_power(parser.value_byte()); // The OCR is a value from 0 to 255 (uint8_t)
+ else
+ cutter.set_power(parser.intval('S', 255));
#else
- set_spindle_laser_enabled(true);
+ cutter.set_enabled(true);
#endif
}
/**
- * M5 turn off spindle
+ * M5 - Cutter OFF
*/
void GcodeSuite::M5() {
planner.synchronize();
- set_spindle_laser_enabled(false);
+ cutter.set_enabled(false);
}
-#endif // SPINDLE_LASER_ENABLE
+#endif // HAS_CUTTER
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 98091f78fd..4b4bc70a23 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -322,7 +322,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 1: M0_M1(); break; // M1: Conditional stop - Wait for user button press on LCD
#endif
- #if ENABLED(SPINDLE_LASER_ENABLE)
+ #if HAS_CUTTER
case 3: M3_M4(false); break; // M3: Turn ON Laser | Spindle (clockwise), set Power | Speed
case 4: M3_M4(true ); break; // M4: Turn ON Laser | Spindle (counter-clockwise), set Power | Speed
case 5: M5(); break; // M5: Turn OFF Laser | Spindle
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index d5656c7a43..8878cf9abf 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -75,9 +75,9 @@
*
* M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
* M1 -> M0
- * M3 - Turn ON Laser | Spindle (clockwise), set Power | Speed. (Requires SPINDLE_LASER_ENABLE)
- * M4 - Turn ON Laser | Spindle (counter-clockwise), set Power | Speed. (Requires SPINDLE_LASER_ENABLE)
- * M5 - Turn OFF Laser | Spindle. (Requires SPINDLE_LASER_ENABLE)
+ * M3 - Turn ON Laser | Spindle (clockwise), set Power | Speed. (Requires SPINDLE_FEATURE or LASER_FEATURE)
+ * M4 - Turn ON Laser | Spindle (counter-clockwise), set Power | Speed. (Requires SPINDLE_FEATURE or LASER_FEATURE)
+ * M5 - Turn OFF Laser | Spindle. (Requires SPINDLE_FEATURE or LASER_FEATURE)
* M7 - Turn mist coolant ON. (Requires COOLANT_CONTROL)
* M8 - Turn flood coolant ON. (Requires COOLANT_CONTROL)
* M9 - Turn coolant OFF. (Requires COOLANT_CONTROL)
@@ -453,7 +453,7 @@ private:
static void M0_M1();
#endif
- #if ENABLED(SPINDLE_LASER_ENABLE)
+ #if HAS_CUTTER
static void M3_M4(const bool is_M4);
static void M5();
#endif
diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
index 0e2295cbaa..f4b0c3fb10 100644
--- a/Marlin/src/inc/Conditionals_adv.h
+++ b/Marlin/src/inc/Conditionals_adv.h
@@ -26,6 +26,8 @@
* Defines that depend on advanced configuration.
*/
+#define HAS_CUTTER EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+
#if !defined(__AVR__) || !defined(USBCON)
// Define constants and variables for buffering serial data.
// Use only 0 or powers of 2 greater than 1
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 83d081d932..06f51920f5 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -1692,7 +1692,7 @@
#endif
#endif
-// needs to be here so that we catch the above changes to our defines
+// Defined here to catch the above defines
#if ENABLED(SDCARD_SORT_ALPHA)
#define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
#endif
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index a0a416e3e2..37174c9b71 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -348,8 +348,16 @@
#error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins."
#elif defined(MAX6675_SS2)
#error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
+#elif defined(SPINDLE_LASER_ENABLE)
+ #error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h."
#elif defined(SPINDLE_LASER_ENABLE_PIN)
- #error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your configuration and/or pins."
+ #error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your Configuration_adv.h and/or pins."
+#elif defined(SPINDLE_DIR_CHANGE)
+ #error "SPINDLE_DIR_CHANGE is now SPINDLE_CHANGE_DIR. Please update your Configuration_adv.h."
+#elif defined(SPINDLE_STOP_ON_DIR_CHANGE)
+ #error "SPINDLE_STOP_ON_DIR_CHANGE is now SPINDLE_CHANGE_DIR_STOP. Please update your Configuration_adv.h."
+#elif defined(SPINDLE_LASER_ENABLE_INVERT)
+ #error "SPINDLE_LASER_ENABLE_INVERT is now SPINDLE_LASER_ACTIVE_HIGH. Please update your Configuration_adv.h."
#elif defined(CHAMBER_HEATER_PIN)
#error "CHAMBER_HEATER_PIN is now HEATER_CHAMBER_PIN. Please update your configuration and/or pins."
#elif defined(TMC_Z_CALIBRATION)
@@ -2284,3 +2292,63 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "MIN_ and MAX_SOFTWARE_ENDSTOPS are both required with offset hotends."
#endif
#endif
+
+#if HAS_CUTTER
+ #define _PIN_CONFLICT(P) (PIN_EXISTS(P) && P##_PIN == SPINDLE_LASER_PWM_PIN)
+ #if BOTH(SPINDLE_FEATURE, LASER_FEATURE)
+ #error "Enable only one of SPINDLE_FEATURE or LASER_FEATURE."
+ #elif !PIN_EXISTS(SPINDLE_LASER_ENA)
+ #error "(SPINDLE|LASER)_FEATURE requires SPINDLE_LASER_ENA_PIN."
+ #elif ENABLED(SPINDLE_CHANGE_DIR) && !PIN_EXISTS(SPINDLE_DIR)
+ #error "SPINDLE_DIR_PIN is required for SPINDLE_CHANGE_DIR."
+ #elif ENABLED(SPINDLE_LASER_PWM)
+ #if !defined(SPINDLE_LASER_PWM_PIN) || SPINDLE_LASER_PWM_PIN < 0
+ #error "SPINDLE_LASER_PWM_PIN is required for SPINDLE_LASER_PWM."
+ #elif !PWM_PIN(SPINDLE_LASER_PWM_PIN)
+ #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
+ #elif SPINDLE_LASER_POWERUP_DELAY < 1
+ #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
+ #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
+ #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
+ #elif !defined(SPINDLE_LASER_PWM_INVERT)
+ #error "SPINDLE_LASER_PWM_INVERT is required for (SPINDLE|LASER)_FEATURE."
+ #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
+ #error "SPINDLE_LASER_PWM equation constant(s) missing."
+ #elif _PIN_CONFLICT(X_MIN)
+ #error "SPINDLE_LASER_PWM pin conflicts with X_MIN_PIN."
+ #elif _PIN_CONFLICT(X_MAX)
+ #error "SPINDLE_LASER_PWM pin conflicts with X_MAX_PIN."
+ #elif _PIN_CONFLICT(Z_STEP)
+ #error "SPINDLE_LASER_PWM pin conflicts with Z_STEP_PIN."
+ #elif _PIN_CONFLICT(CASE_LIGHT)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with CASE_LIGHT_PIN."
+ #elif _PIN_CONFLICT(E0_AUTO_FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with E0_AUTO_FAN_PIN."
+ #elif _PIN_CONFLICT(E1_AUTO_FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with E1_AUTO_FAN_PIN."
+ #elif _PIN_CONFLICT(E2_AUTO_FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with E2_AUTO_FAN_PIN."
+ #elif _PIN_CONFLICT(E3_AUTO_FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with E3_AUTO_FAN_PIN."
+ #elif _PIN_CONFLICT(E4_AUTO_FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with E4_AUTO_FAN_PIN."
+ #elif _PIN_CONFLICT(E5_AUTO_FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with E5_AUTO_FAN_PIN."
+ #elif _PIN_CONFLICT(FAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN."
+ #elif _PIN_CONFLICT(FAN1)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN."
+ #elif _PIN_CONFLICT(FAN2)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with FAN2_PIN."
+ #elif _PIN_CONFLICT(CONTROLLERFAN)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with CONTROLLERFAN_PIN."
+ #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_XY)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_XY."
+ #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_Z)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_Z."
+ #elif _PIN_CONFLICT(MOTOR_CURRENT_PWM_E)
+ #error "SPINDLE_LASER_PWM_PIN conflicts with MOTOR_CURRENT_PWM_E."
+ #endif
+ #endif
+ #undef _PIN_CONFLICT
+#endif
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 2fee46b2fe..dcb96e6d76 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -190,6 +190,18 @@
#ifndef MSG_LASER_POWER
#define MSG_LASER_POWER _UxGT("Laser power")
#endif
+#ifndef MSG_SPINDLE_MENU
+ #define MSG_SPINDLE_MENU _UxGT("Spindle Control")
+#endif
+#ifndef MSG_SPINDLE_OFF
+ #define MSG_SPINDLE_OFF _UxGT("Spindle Off")
+#endif
+#ifndef MSG_SPINDLE_ON
+ #define MSG_SPINDLE_ON _UxGT("Spindle On")
+#endif
+#ifndef MSG_SPINDLE_POWER
+ #define MSG_SPINDLE_POWER _UxGT("Spindle power")
+#endif
#ifndef MSG_SPINDLE_REVERSE
#define MSG_SPINDLE_REVERSE _UxGT("Spindle Reverse")
#endif
diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp
index f13b370d29..16dfd22a43 100644
--- a/Marlin/src/lcd/menu/menu.cpp
+++ b/Marlin/src/lcd/menu/menu.cpp
@@ -162,7 +162,8 @@ DEFINE_MENU_EDIT_ITEM(int4); // 1234, -123 right-justified
DEFINE_MENU_EDIT_ITEM(int8); // 123, -12 right-justified
DEFINE_MENU_EDIT_ITEM(uint8); // 123 right-justified
DEFINE_MENU_EDIT_ITEM(uint16_3); // 123, -12 right-justified
-DEFINE_MENU_EDIT_ITEM(uint16_4); // 1234, -123 right-justified
+DEFINE_MENU_EDIT_ITEM(uint16_4); // 1234 right-justified
+DEFINE_MENU_EDIT_ITEM(uint16_5); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM(float3); // 123 right-justified
DEFINE_MENU_EDIT_ITEM(float52); // 123.45
DEFINE_MENU_EDIT_ITEM(float43); // 1.234
diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h
index 8135d2a973..fb1e45474b 100644
--- a/Marlin/src/lcd/menu/menu.h
+++ b/Marlin/src/lcd/menu/menu.h
@@ -51,8 +51,9 @@ DECLARE_MENU_EDIT_TYPE(int16_t, int3, i16tostr3, 1 ); // 123
DECLARE_MENU_EDIT_TYPE(int16_t, int4, i16tostr4sign, 1 ); // 1234, -123 right-justified
DECLARE_MENU_EDIT_TYPE(int8_t, int8, i8tostr3, 1 ); // 123, -12 right-justified
DECLARE_MENU_EDIT_TYPE(uint8_t, uint8, ui8tostr3, 1 ); // 123 right-justified
-DECLARE_MENU_EDIT_TYPE(uint16_t, uint16_3, ui16tostr3, 1 ); // 123, -12 right-justified
-DECLARE_MENU_EDIT_TYPE(uint16_t, uint16_4, ui16tostr4, 0.1 ); // 1234, -123 right-justified
+DECLARE_MENU_EDIT_TYPE(uint16_t, uint16_3, ui16tostr3, 1 ); // 123 right-justified
+DECLARE_MENU_EDIT_TYPE(uint16_t, uint16_4, ui16tostr4, 0.1 ); // 1234 right-justified
+DECLARE_MENU_EDIT_TYPE(uint16_t, uint16_5, ui16tostr5, 0.01 ); // 12345 right-justified
DECLARE_MENU_EDIT_TYPE(float, float3, ftostr3, 1 ); // 123 right-justified
DECLARE_MENU_EDIT_TYPE(float, float52, ftostr42_52, 100 ); // _2.34, 12.34, -2.34 or 123.45, -23.45
DECLARE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000 ); // 1.234
@@ -121,8 +122,9 @@ DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(int3); // 123, -12 right-justif
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(int4); // 1234, -123 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(int8); // 123, -12 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(uint8); // 123 right-justified
-DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(uint16_3); // 123, -12 right-justified
-DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(uint16_4); // 1234, -123 right-justified
+DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(uint16_3); // 123 right-justified
+DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(uint16_4); // 1234 right-justified
+DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(uint16_5); // 12345 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float3); // 123 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52); // _2.34, 12.34, -2.34 or 123.45, -23.45
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float43); // 1.234
@@ -206,6 +208,7 @@ DECLARE_MENU_EDIT_ITEM(int8);
DECLARE_MENU_EDIT_ITEM(uint8);
DECLARE_MENU_EDIT_ITEM(uint16_3);
DECLARE_MENU_EDIT_ITEM(uint16_4);
+DECLARE_MENU_EDIT_ITEM(uint16_5);
DECLARE_MENU_EDIT_ITEM(float3);
DECLARE_MENU_EDIT_ITEM(float52);
DECLARE_MENU_EDIT_ITEM(float43);
diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp
index b1887a9bb6..0d338f148c 100644
--- a/Marlin/src/lcd/menu/menu_main.cpp
+++ b/Marlin/src/lcd/menu/menu_main.cpp
@@ -74,6 +74,11 @@ void menu_configuration();
void menu_led();
#endif
+#if HAS_CUTTER
+ #include "../../feature/spindle_laser.h"
+ void menu_spindle_laser();
+#endif
+
#if ENABLED(MIXING_EXTRUDER)
void menu_mixer();
#endif
@@ -153,6 +158,10 @@ void menu_main() {
MENU_ITEM(submenu, MSG_MOTION, menu_motion);
}
+ #if HAS_CUTTER
+ MENU_ITEM(submenu, MSG_CUTTER(MENU), menu_spindle_laser);
+ #endif
+
MENU_ITEM(submenu, MSG_TEMPERATURE, menu_temperature);
#if ENABLED(MIXING_EXTRUDER)
diff --git a/Marlin/src/lcd/menu/menu_spindle_laser.cpp b/Marlin/src/lcd/menu/menu_spindle_laser.cpp
new file mode 100644
index 0000000000..d26be6f1ed
--- /dev/null
+++ b/Marlin/src/lcd/menu/menu_spindle_laser.cpp
@@ -0,0 +1,54 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+//
+// Spindle / Laser Menu
+//
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_CUTTER
+
+ #include "menu.h"
+
+ #include "../../feature/spindle_laser.h"
+
+ void menu_spindle_laser() {
+
+ START_MENU();
+ MENU_BACK(MSG_MAIN);
+ if (cutter.enabled()) {
+ #if ENABLED(SPINDLE_LASER_PWM)
+ MENU_ITEM_EDIT_CALLBACK(CUTTER_MENU_TYPE, MSG_CUTTER(POWER), &cutter.power, SPEED_POWER_MIN, SPEED_POWER_MAX, cutter.update_output);
+ #endif
+ MENU_ITEM(function, MSG_CUTTER(OFF), cutter.disable);
+ }
+ else {
+ MENU_ITEM(function, MSG_CUTTER(ON), cutter.enable_forward);
+ #if ENABLED(SPINDLE_CHANGE_DIR)
+ MENU_ITEM(function, MSG_SPINDLE_REVERSE, cutter.enable_reverse);
+ #endif
+ }
+ END_MENU();
+ }
+
+#endif // HAS_CUTTER
diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp
index dd6bd233a9..c84e56435c 100644
--- a/Marlin/src/lcd/menu/menu_temperature.cpp
+++ b/Marlin/src/lcd/menu/menu_temperature.cpp
@@ -303,48 +303,6 @@ void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb
#endif // HAS_TEMP_HOTEND || HAS_HEATED_BED
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- extern uint8_t spindle_laser_power;
- bool spindle_laser_enabled();
- void set_spindle_laser_enabled(const bool enabled);
- #if ENABLED(SPINDLE_LASER_PWM)
- void update_spindle_laser_power();
- #endif
-
- inline void _lcd_spindle_laser_off() { set_spindle_laser_enabled(false); }
- void set_spindle_direction(bool);
- inline void _lcd_spindle_laser_on(const bool is_M4) {
- #if SPINDLE_DIR_CHANGE
- set_spindle_direction(is_M4);
- #endif
- set_spindle_laser_enabled(true);
- }
- inline void _lcd_spindle_laser_on() { _lcd_spindle_laser_on(false); }
- #if SPINDLE_DIR_CHANGE
- inline void _lcd_spindle_on_reverse() { _lcd_spindle_laser_on(true); }
- #endif
-
- void menu_spindle_laser() {
- START_MENU();
- MENU_BACK(MSG_MAIN);
- if (spindle_laser_enabled()) {
- #if ENABLED(SPINDLE_LASER_PWM)
- MENU_ITEM_EDIT_CALLBACK(uint8, MSG_LASER_POWER, &spindle_laser_power, SPEED_POWER_MIN, SPEED_POWER_MAX, update_spindle_laser_power);
- #endif
- MENU_ITEM(function, MSG_LASER_OFF, _lcd_spindle_laser_off);
- }
- else {
- MENU_ITEM(function, MSG_LASER_ON, _lcd_spindle_laser_on);
- #if SPINDLE_DIR_CHANGE
- MENU_ITEM(function, MSG_SPINDLE_REVERSE, _lcd_spindle_on_reverse);
- #endif
- }
- END_MENU();
- }
-
-#endif // SPINDLE_LASER_ENABLE
-
void menu_temperature() {
START_MENU();
MENU_BACK(MSG_MAIN);
@@ -415,10 +373,6 @@ void menu_temperature() {
#endif
#endif // FAN_COUNT > 0
- #if ENABLED(SPINDLE_LASER_ENABLE)
- MENU_ITEM(submenu, MSG_LASER_MENU, menu_spindle_laser);
- #endif
-
#if HAS_TEMP_HOTEND
//
diff --git a/Marlin/src/libs/numtostr.cpp b/Marlin/src/libs/numtostr.cpp
index 09ebf64d2f..78f7370fbf 100644
--- a/Marlin/src/libs/numtostr.cpp
+++ b/Marlin/src/libs/numtostr.cpp
@@ -57,12 +57,14 @@ char* i8tostr3(const int8_t x) {
return &conv[4];
}
-// Convert unsigned 16bit int to string 123 format
-char* ui16tostr3(const uint16_t xx) {
+// Convert unsigned 16bit int to string 12345 format
+char* ui16tostr5(const uint16_t xx) {
+ conv[2] = RJDIGIT(xx, 10000);
+ conv[3] = RJDIGIT(xx, 1000);
conv[4] = RJDIGIT(xx, 100);
conv[5] = RJDIGIT(xx, 10);
conv[6] = DIGIMOD(xx, 1);
- return &conv[4];
+ return &conv[2];
}
// Convert unsigned 16bit int to string 1234 format
@@ -74,6 +76,14 @@ char* ui16tostr4(const uint16_t xx) {
return &conv[3];
}
+// Convert unsigned 16bit int to string 123 format
+char* ui16tostr3(const uint16_t xx) {
+ conv[4] = RJDIGIT(xx, 100);
+ conv[5] = RJDIGIT(xx, 10);
+ conv[6] = DIGIMOD(xx, 1);
+ return &conv[4];
+}
+
// Convert signed 16bit int to rj string with 123 or -12 format
char* i16tostr3(const int16_t x) {
int xx = x;
@@ -215,12 +225,7 @@ char* ftostr54sign(const float &f, char plus/*=' '*/) {
// Convert unsigned float to rj string with 12345 format
char* ftostr5rj(const float &f) {
const long i = ((f < 0 ? -f : f) * 10 + 5) / 10;
- conv[2] = RJDIGIT(i, 10000);
- conv[3] = RJDIGIT(i, 1000);
- conv[4] = RJDIGIT(i, 100);
- conv[5] = RJDIGIT(i, 10);
- conv[6] = DIGIMOD(i, 1);
- return &conv[2];
+ return ui16tostr5(i);
}
// Convert signed float to string with +1234.5 format
diff --git a/Marlin/src/libs/numtostr.h b/Marlin/src/libs/numtostr.h
index a0da4804ed..91f88b9843 100644
--- a/Marlin/src/libs/numtostr.h
+++ b/Marlin/src/libs/numtostr.h
@@ -32,12 +32,15 @@ char* ui8tostr3(const uint8_t i);
// Convert int8_t to string with 123 format
char* i8tostr3(const int8_t x);
-// Convert uint16_t to string with 123 format
-char* ui16tostr3(const uint16_t x);
+// Convert uint16_t to string with 12345 format
+char* ui16tostr5(const uint16_t x);
// Convert uint16_t to string with 1234 format
char* ui16tostr4(const uint16_t x);
+// Convert uint16_t to string with 123 format
+char* ui16tostr3(const uint16_t x);
+
// Convert int16_t to string with 123 format
char* i16tostr3(const int16_t x);
diff --git a/Marlin/src/pins/pins_3DRAG.h b/Marlin/src/pins/pins_3DRAG.h
index f82269b70d..361ef107dd 100644
--- a/Marlin/src/pins/pins_3DRAG.h
+++ b/Marlin/src/pins/pins_3DRAG.h
@@ -140,7 +140,7 @@
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#if !EXTRUDERS
#undef E0_DIR_PIN
#undef E0_ENABLE_PIN
diff --git a/Marlin/src/pins/pins_AZTEEG_X3.h b/Marlin/src/pins/pins_AZTEEG_X3.h
index e7076cba9b..15029fc304 100644
--- a/Marlin/src/pins/pins_AZTEEG_X3.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3.h
@@ -84,7 +84,7 @@
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#undef SDA // use EXP3 header
#undef SCL
#if SERVO0_PIN == 7
diff --git a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
index bae70258e9..e34ce4b3ec 100644
--- a/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
+++ b/Marlin/src/pins/pins_AZTEEG_X3_PRO.h
@@ -157,7 +157,7 @@
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
-#if ENABLED(SPINDLE_LASER_ENABLE) // EXP2 header
+#if HAS_CUTTER // EXP2 header
#if ANY(VIKI2, miniVIKI)
#undef BTN_EN2
#define BTN_EN2 31 // need 7 for the spindle speed PWM
diff --git a/Marlin/src/pins/pins_COHESION3D_MINI.h b/Marlin/src/pins/pins_COHESION3D_MINI.h
index 2076a5aeb2..b4aa2397d0 100644
--- a/Marlin/src/pins/pins_COHESION3D_MINI.h
+++ b/Marlin/src/pins/pins_COHESION3D_MINI.h
@@ -116,7 +116,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
diff --git a/Marlin/src/pins/pins_COHESION3D_REMIX.h b/Marlin/src/pins/pins_COHESION3D_REMIX.h
index e97742746d..feb270b640 100644
--- a/Marlin/src/pins/pins_COHESION3D_REMIX.h
+++ b/Marlin/src/pins/pins_COHESION3D_REMIX.h
@@ -137,7 +137,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#undef HEATER_0_PIN
#undef HEATER_BED_PIN
#undef FAN_PIN
diff --git a/Marlin/src/pins/pins_FORMBOT_RAPTOR2.h b/Marlin/src/pins/pins_FORMBOT_RAPTOR2.h
index 733308f973..278f834220 100644
--- a/Marlin/src/pins/pins_FORMBOT_RAPTOR2.h
+++ b/Marlin/src/pins/pins_FORMBOT_RAPTOR2.h
@@ -40,7 +40,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !NUM_SERVOS // Try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 6 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM
diff --git a/Marlin/src/pins/pins_MINITRONICS.h b/Marlin/src/pins/pins_MINITRONICS.h
index f54a4f85f3..cac17779a4 100644
--- a/Marlin/src/pins/pins_MINITRONICS.h
+++ b/Marlin/src/pins/pins_MINITRONICS.h
@@ -130,7 +130,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE) // assumes we're only doing CNC work (no 3D printing)
+#if HAS_CUTTER // assumes we're only doing CNC work (no 3D printing)
#undef HEATER_BED_PIN
#undef TEMP_BED_PIN // need to free up some pins but also need to
#undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin
diff --git a/Marlin/src/pins/pins_RAMPS.h b/Marlin/src/pins/pins_RAMPS.h
index 9bee431fed..9e0d7f89c1 100644
--- a/Marlin/src/pins/pins_RAMPS.h
+++ b/Marlin/src/pins/pins_RAMPS.h
@@ -255,17 +255,17 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
- #define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
+ #define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
#elif AUX2_PINS_FREE
- #define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM
+ #define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM
#endif
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
- #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
+#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
+ #if !NUM_SERVOS // Use servo connector if possible
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 5
@@ -273,6 +273,8 @@
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 65
+ #else
+ #error "No auto-assignable Spindle/Laser pins available."
#endif
#endif
diff --git a/Marlin/src/pins/pins_RAMPS_FD_V1.h b/Marlin/src/pins/pins_RAMPS_FD_V1.h
index 875c2e76b9..633da90c34 100644
--- a/Marlin/src/pins/pins_RAMPS_FD_V1.h
+++ b/Marlin/src/pins/pins_RAMPS_FD_V1.h
@@ -227,7 +227,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if HOTENDS < 3 && ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
+#if HOTENDS < 3 && HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA
#define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 47 // Use E2 DIR
diff --git a/Marlin/src/pins/pins_RAMPS_LINUX.h b/Marlin/src/pins/pins_RAMPS_LINUX.h
index ff99ed7bed..e22a3ba01f 100644
--- a/Marlin/src/pins/pins_RAMPS_LINUX.h
+++ b/Marlin/src/pins/pins_RAMPS_LINUX.h
@@ -228,7 +228,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
diff --git a/Marlin/src/pins/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
index 3cb5376890..5e4ad77feb 100644
--- a/Marlin/src/pins/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/pins_RAMPS_RE_ARM.h
@@ -239,9 +239,13 @@
// M3/M4/M5 - Spindle/Laser Control
// Use servo pins, if available
//
-#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if NUM_SERVOS > 1
- #error "SPINDLE_LASER_ENABLE requires 3 free servo pins."
+ #if ENABLED(SPINDLE_FEATURE)
+ #error "SPINDLE_FEATURE requires 3 free servo pins."
+ #else
+ #error "LASER_FEATURE requires 3 free servo pins."
+ #endif
#endif
#define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM
diff --git a/Marlin/src/pins/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/pins_SANGUINOLOLU_11.h
index 15cfad896b..7b20300877 100644
--- a/Marlin/src/pins/pins_SANGUINOLOLU_11.h
+++ b/Marlin/src/pins/pins_SANGUINOLOLU_11.h
@@ -137,7 +137,7 @@
#define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif
-#if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header
+#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header
#define CASE_LIGHT_PIN 4 // MUST BE HARDWARE PWM - see if IO Header is available
#endif
@@ -276,7 +276,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup/pulldown!
@@ -322,4 +322,4 @@
#define SPINDLE_LASER_ENA_PIN 21 // Pin should have a pullup!
#define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin
#endif
-#endif // SPINDLE_LASER_ENABLE
+#endif
diff --git a/Marlin/src/pins/pins_STM3R_MINI.h b/Marlin/src/pins/pins_STM3R_MINI.h
index 2088ea7a48..63eda1252f 100644
--- a/Marlin/src/pins/pins_STM3R_MINI.h
+++ b/Marlin/src/pins/pins_STM3R_MINI.h
@@ -106,7 +106,7 @@
#define TEMP_2_PIN PA3
// Laser control
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#define SPINDLE_LASER_PWM_PIN PB8
#define SPINDLE_LASER_ENA_PIN PD5
#endif
diff --git a/Marlin/src/pins/pins_ULTIMAIN_2.h b/Marlin/src/pins/pins_ULTIMAIN_2.h
index 821494d129..ac4d1c24a2 100644
--- a/Marlin/src/pins/pins_ULTIMAIN_2.h
+++ b/Marlin/src/pins/pins_ULTIMAIN_2.h
@@ -128,7 +128,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
+#if HAS_CUTTER // use the LED_PIN for spindle speed control or case light
#undef LED_PIN
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENA_PIN 17 // Pin should have a pullup!
diff --git a/Marlin/src/pins/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/pins_ULTIMAKER_OLD.h
index 2ea264d881..4064d90134 100644
--- a/Marlin/src/pins/pins_ULTIMAKER_OLD.h
+++ b/Marlin/src/pins/pins_ULTIMAKER_OLD.h
@@ -80,7 +80,7 @@
#endif
#if ENABLED(BOARD_REV_1_0)
- #if ENABLED(SPINDLE_LASER_ENABLE)
+ #if HAS_CUTTER
#define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM
#define Y_STOP_PIN 12 // SW2
#define Z_STOP_PIN 11 // SW3
@@ -106,7 +106,7 @@
//
// Z Probe (when not Z_MIN_PIN)
//
-#if !defined(Z_MIN_PROBE_PIN) && !BOTH(SPINDLE_LASER_ENABLE, BOARD_REV_1_0)
+#if !defined(Z_MIN_PROBE_PIN) && !(HAS_CUTTER && ENABLED(BOARD_REV_1_0))
#define Z_MIN_PROBE_PIN Z_MAX_PIN
#endif
@@ -125,7 +125,7 @@
#define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35
-#if BOTH(SPINDLE_LASER_ENABLE, BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1
+#if HAS_CUTTER && ENABLED(BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1
// Move E0 to the spare and get Spindle/Laser signals from E0
#define E0_STEP_PIN 49
#define E0_DIR_PIN 47
@@ -214,7 +214,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE)
+#if HAS_CUTTER
#if EITHER(BOARD_REV_1_0, BOARD_REV_1_5) // Use the last three SW positions
#define SPINDLE_DIR_PIN 10 // 1.0: SW4 1.5: EXP3-6 ("10")
#define SPINDLE_LASER_PWM_PIN 9 // 1.0: SW5 1.5: EXP3-7 ( "9") .. MUST BE HARDWARE PWM
diff --git a/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
index b8d4fdee38..1911470018 100644
--- a/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
+++ b/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
@@ -177,7 +177,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
-#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
+#if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
diff --git a/buildroot/share/tests/megaatmega2560-tests b/buildroot/share/tests/megaatmega2560-tests
index 49b077e31c..119438af09 100755
--- a/buildroot/share/tests/megaatmega2560-tests
+++ b/buildroot/share/tests/megaatmega2560-tests
@@ -58,7 +58,7 @@ opt_set TEMP_SENSOR_3 20
opt_set TEMP_SENSOR_4 1000
opt_set TEMP_SENSOR_BED 1
opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION \
- EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT GCODE_MACROS SPINDLE_LASER_ENABLE \
+ EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT GCODE_MACROS \
USB_FLASH_DRIVE_SUPPORT SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI \
CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION MULTI_NOZZLE_DUPLICATION
exec_test $1 $2 "Azteeg X3 with 5 extruders, RRDFGSC, probeless UBL, Linear Advance, and more"
@@ -87,8 +87,8 @@ exec_test $1 $2 "RAMPS with ZONESTAR_LCD, Servo Probe, 3-Point ABL, DEBUG_LEVELI
# Test MESH_BED_LEVELING feature, with LCD
#
restore_configs
-opt_enable MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING MESH_EDIT_MENU ULTIMAKERCONTROLLER
-exec_test $1 $2 "MESH_BED_LEVELING feature, with LCD"
+opt_enable SPINDLE_FEATURE MESH_BED_LEVELING G26_MESH_EDITING MESH_G28_REST_ORIGIN LCD_BED_LEVELING MESH_EDIT_MENU ULTIMAKERCONTROLLER
+exec_test $1 $2 "Spindle, MESH_BED_LEVELING, and LCD"
#
# Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 3dd9a673fe..82190449a3 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 4134562e37..cffb6842ca 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 5621b211a3..d2db52ff13 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 8d8b300f5b..b7c6ea5573 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index c988f82180..c0724e11c3 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index c988f82180..c0724e11c3 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index ac340d3b0a..ba1fdb63d8 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 56481693a9..4a9f54b4d6 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 095214594c..db7162fb50 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index ba52e49788..3d23a40949 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 7a2a4b0ebc..99db078094 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 32a374fa02..a12d56e22c 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -2125,36 +2125,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index b0e0f0023d..cefd204c71 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index e6d8673d40..26708ace49 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 47e9601646..ad2db8e8f8 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index ae4c205b63..75485afc07 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -2129,36 +2129,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 47e9601646..ad2db8e8f8 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 2a2be5cdf5..a981df4000 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index ef0bad95b6..ae461d75e0 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 916d5b2f81..caa4f0fece 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index efb37fcc82..b006919d7f 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 194e1fb981..d3584a0831 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 39166dea07..b013843a8a 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index a99ce43310..98e3eb4126 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index bf3db48cc1..1f62b760bb 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 18d4ce5979..0533774f01 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index e283bdad0c..85a49df14d 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 45e64e3f59..dc2c0b9182 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 1d28d2fdd6..6ea4e2bd06 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 8e8973fab5..afbe8f9dc1 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 867915c837..c193bd57a2 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -2120,36 +2120,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 8635203df8..d5dfe40000 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 01e0db7330..0753ccaf14 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index dc17649d69..d3b351154f 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -2125,36 +2125,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index f2f226e2c0..990d585812 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -2125,36 +2125,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Fysetc/AIO_II/Configuration_adv.h b/config/examples/Fysetc/AIO_II/Configuration_adv.h
index fb7d33760b..5b846a7363 100644
--- a/config/examples/Fysetc/AIO_II/Configuration_adv.h
+++ b/config/examples/Fysetc/AIO_II/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Fysetc/CHEETAH/Configuration_adv.h b/config/examples/Fysetc/CHEETAH/Configuration_adv.h
index 87d5f4de5d..c06dd564c8 100644
--- a/config/examples/Fysetc/CHEETAH/Configuration_adv.h
+++ b/config/examples/Fysetc/CHEETAH/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Fysetc/F6_13/Configuration_adv.h b/config/examples/Fysetc/F6_13/Configuration_adv.h
index 5a11c03a02..df85984303 100644
--- a/config/examples/Fysetc/F6_13/Configuration_adv.h
+++ b/config/examples/Fysetc/F6_13/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 2bb1ad83bb..3b2798a1c1 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index e61e7178ec..ac62d27641 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index abe146bf78..70231c3773 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 19c2630997..67ab2d478a 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -2120,36 +2120,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 2bb1ad83bb..3b2798a1c1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 2bb1ad83bb..3b2798a1c1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index a2c8051027..8178dfdb96 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index a0deef379b..4abbb7c748 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -2126,36 +2126,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index ec4f59d79e..56d1f14d14 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index a0deef379b..4abbb7c748 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -2126,36 +2126,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 0e56f40e43..aa20a83c57 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 0b527ef374..b7b4101263 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 768a13d15a..65af378ed1 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 3522d62e47..c58d0439d7 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 3ad7a482c3..54a2ecfce2 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 921179e739..af7a88bedc 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -2122,36 +2122,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index a793a1aa4f..b3555b11fa 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 5233865d6a..b08625decb 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index f6affb8f31..f1263551ad 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index f9c170668b..1fa2b41ffe 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 9d5e7a6256..df16e6096f 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 63ac676eab..898ed1a38e 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
@@ -2117,36 +2117,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 3156664ba3..39dea8bca9 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 9da41887f5..a6db83a776 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index dfb66e8afb..9a1edb6b69 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 224c3e1c79..7e3aa80393 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 8f8ed92178..10fdef4ef3 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 57d03352a8..ebb7e9d8a5 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 2e06549974..cb996c1bd7 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 3bbe12bde9..98f2aaf399 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -2134,36 +2134,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index e6fa4038ca..9cae06a1cc 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 4971b99b72..6a988ad144 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 94f7c9341a..9e44cdfe09 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 22fbb103f0..9981bb566e 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 60b1124503..43bc573e14 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 60b1124503..43bc573e14 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 945db45bac..27bd3e2edf 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 945db45bac..27bd3e2edf 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 8b547f4fce..f15d5d09c3 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index cfc88a03c3..e43cc7ef6b 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 945db45bac..27bd3e2edf 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 945db45bac..27bd3e2edf 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index a6c12d57ba..76613e5658 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -2123,36 +2123,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 638d1ae825..c6bb20c1f0 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index a191b13fe9..198e79d6dc 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index d16c7fb626..962e545b2f 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -2121,36 +2121,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 165f91f8d3..07bfa06045 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -2122,36 +2122,38 @@
*
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
*/
-//#define SPINDLE_LASER_ENABLE
-#if ENABLED(SPINDLE_LASER_ENABLE)
-
- #define SPINDLE_LASER_ENABLE_INVERT false // Set to "true" if the on/off function is reversed
- #define SPINDLE_LASER_PWM true // Set to true if your controller supports setting the speed/power
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+ #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH
+ #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power
#define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower
#define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
- #define SPINDLE_DIR_CHANGE true // Set to true if your spindle controller supports changing spindle direction
- #define SPINDLE_INVERT_DIR false
- #define SPINDLE_STOP_ON_DIR_CHANGE true // Set to true if Marlin should stop the spindle before changing rotation direction
-
- /**
- * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
- *
- * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
- * where PWM duty cycle varies from 0 to 255
- *
- * set the following for your controller (ALL MUST BE SET)
- */
- #define SPEED_POWER_SLOPE 118.4
- #define SPEED_POWER_INTERCEPT 0
- #define SPEED_POWER_MIN 5000
- #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #if ENABLED(SPINDLE_FEATURE)
+ //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction
+ #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction
+ #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed
- //#define SPEED_POWER_SLOPE 0.3922
- //#define SPEED_POWER_INTERCEPT 0
- //#define SPEED_POWER_MIN 10
- //#define SPEED_POWER_MAX 100 // 0-100%
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+ #else
+ #define SPEED_POWER_SLOPE 0.3922
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 10
+ #define SPEED_POWER_MAX 100 // 0-100%
+ #endif
#endif
/**
--
GitLab