diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 2273980e72075555bd68b97175fc09383c908947..1386720d25ba08d65eda7835347beef1f45437f1 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -464,6 +464,31 @@
#define E4_ENABLE_PIN -1
#endif
+#ifndef X_CS_PIN
+ #define X_CS_PIN -1
+#endif
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN -1
+#endif
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN -1
+#endif
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN -1
+#endif
+#ifndef E1_CS_PIN
+ #define E1_CS_PIN -1
+#endif
+#ifndef E2_CS_PIN
+ #define E2_CS_PIN -1
+#endif
+#ifndef E3_CS_PIN
+ #define E3_CS_PIN -1
+#endif
+#ifndef E4_CS_PIN
+ #define E4_CS_PIN -1
+#endif
+
#ifndef FAN_PIN
#define FAN_PIN -1
#endif
@@ -591,7 +616,7 @@
#endif
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
-#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN,
+#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, E0_CS_PIN,
#define _E1_PINS
#define _E2_PINS
#define _E3_PINS
@@ -601,30 +626,33 @@
// Tools 0 and 1 use E0
#if EXTRUDERS > 2 // Tools 2 and 3 use E1
#undef _E1_PINS
- #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
+ #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN,
#if EXTRUDERS > 4 // Tools 4 and 5 use E2
#undef _E2_PINS
- #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN,
+ #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN,
#endif
#endif
#elif EXTRUDERS > 1
#undef _E1_PINS
- #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
+ #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN,
#if EXTRUDERS > 2
#undef _E2_PINS
- #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN,
+ #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN,
#if EXTRUDERS > 3
#undef _E3_PINS
- #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN,
+ #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_MS3_PIN, E3_CS_PIN,
#if EXTRUDERS > 4
#undef _E4_PINS
- #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN,
+ #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_MS3_PIN, E4_CS_PIN,
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
-#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_0_PIN),
+// Marlin needs to account for pins that equal -1
+#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p))
+
+#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
#define _H1_PINS
#define _H2_PINS
#define _H3_PINS
@@ -632,37 +660,37 @@
#if HOTENDS > 1
#undef _H1_PINS
- #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_1_PIN),
+ #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
#if HOTENDS > 2
#undef _H2_PINS
- #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_2_PIN),
+ #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
#if HOTENDS > 3
#undef _H3_PINS
- #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_3_PIN),
+ #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
#if HOTENDS > 4
#undef _H4_PINS
- #define _H4_PINS HEATER_4_PIN, analogInputToDigitalPin(TEMP_4_PIN),
+ #define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#elif ENABLED(MIXING_EXTRUDER)
#undef _E1_PINS
- #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
+ #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN,
#if MIXING_STEPPERS > 2
#undef _E2_PINS
- #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN,
+ #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN,
#if MIXING_STEPPERS > 3
#undef _E3_PINS
- #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN,
+ #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_CS_PIN,
#if MIXING_STEPPERS > 4
#undef _E4_PINS
- #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN,
+ #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_CS_PIN,
#endif // MIXING_STEPPERS > 4
#endif // MIXING_STEPPERS > 3
#endif // MIXING_STEPPERS > 2
#endif // MIXING_STEPPERS > 1
-#define BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN),
+#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN),
//
// Assign endstop pins for boards with only 3 connectors
@@ -765,12 +793,13 @@
#define X2_STEP_PIN _EPIN(E_STEPPERS, STEP)
#define X2_DIR_PIN _EPIN(E_STEPPERS, DIR)
#define X2_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE)
+ #define X2_CS_PIN _EPIN(E_STEPPERS, CS)
#if E_STEPPERS > 4 || !PIN_EXISTS(X2_ENABLE)
#error "No E stepper plug left for X2!"
#endif
#endif
#undef _X2_PINS
- #define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN,
+ #define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, X2_CS_PIN,
#define Y2_E_INDEX INCREMENT(E_STEPPERS)
#else
#define Y2_E_INDEX E_STEPPERS
@@ -782,12 +811,13 @@
#define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP)
#define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR)
#define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE)
+ #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS)
#if Y2_E_INDEX > 4 || !PIN_EXISTS(Y2_ENABLE)
#error "No E stepper plug left for Y2!"
#endif
#endif
#undef _Y2_PINS
- #define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN,
+ #define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, Y2_CS_PIN,
#define Z2_E_INDEX INCREMENT(Y2_E_INDEX)
#else
#define Z2_E_INDEX Y2_E_INDEX
@@ -799,12 +829,13 @@
#define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP)
#define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR)
#define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE)
+ #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS)
#if Z2_E_INDEX > 4 || !PIN_EXISTS(Z2_ENABLE)
#error "No E stepper plug left for Z2!"
#endif
#endif
#undef _Z2_PINS
- #define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN,
+ #define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, Z2_CS_PIN,
#endif
#ifndef HAL_SENSITIVE_PINS
@@ -812,14 +843,13 @@
#endif
#define SENSITIVE_PINS { \
- X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \
- Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
- Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \
+ X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, X_MS1_PIN, X_MS2_PIN, X_CS_PIN, \
+ Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Y_MS1_PIN, Y_MS2_PIN, Y_CS_PIN, \
+ Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MS1_PIN, Z_MS2_PIN, Z_MS3_PIN, Z_CS_PIN, Z_MIN_PROBE_PIN, \
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \
_X2_PINS _Y2_PINS _Z2_PINS \
- X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN, \
HAL_SENSITIVE_PINS \
}