From d1e20eb29f15c0dc4faa21769251709c455d18b8 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Thu, 23 Jul 2020 20:46:11 -0500
Subject: [PATCH] Update links, README, contributing, etc.

---
 .github/FUNDING.yml                           |  2 +-
 .github/contributing.md                       | 13 +++++-----
 .github/issue_template.md                     |  8 +++++--
 Marlin/Configuration.h                        |  2 +-
 Marlin/Marlin.ino                             |  2 +-
 Marlin/src/HAL/AVR/fastio.h                   |  2 +-
 Marlin/src/HAL/DUE/Tone.cpp                   |  2 +-
 Marlin/src/HAL/DUE/fastio.h                   |  2 +-
 Marlin/src/HAL/DUE/usb/arduino_due_x.h        |  2 +-
 Marlin/src/HAL/DUE/usb/compiler.h             |  2 +-
 Marlin/src/HAL/DUE/usb/conf_access.h          |  2 +-
 Marlin/src/HAL/DUE/usb/conf_clock.h           |  2 +-
 Marlin/src/HAL/DUE/usb/conf_usb.h             |  2 +-
 Marlin/src/HAL/DUE/usb/ctrl_access.c          |  2 +-
 Marlin/src/HAL/DUE/usb/ctrl_access.h          |  2 +-
 Marlin/src/HAL/DUE/usb/genclk.h               |  2 +-
 Marlin/src/HAL/DUE/usb/mrepeat.h              |  2 +-
 Marlin/src/HAL/DUE/usb/osc.h                  |  2 +-
 Marlin/src/HAL/DUE/usb/pll.h                  |  2 +-
 Marlin/src/HAL/DUE/usb/preprocessor.h         |  2 +-
 Marlin/src/HAL/DUE/usb/sbc_protocol.h         |  2 +-
 Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h       |  2 +-
 Marlin/src/HAL/DUE/usb/spc_protocol.h         |  2 +-
 Marlin/src/HAL/DUE/usb/stringz.h              |  2 +-
 Marlin/src/HAL/DUE/usb/sysclk.c               |  2 +-
 Marlin/src/HAL/DUE/usb/sysclk.h               |  2 +-
 Marlin/src/HAL/DUE/usb/tpaste.h               |  2 +-
 Marlin/src/HAL/DUE/usb/udc.c                  |  2 +-
 Marlin/src/HAL/DUE/usb/udc.h                  |  2 +-
 Marlin/src/HAL/DUE/usb/udc_desc.h             |  2 +-
 Marlin/src/HAL/DUE/usb/udd.h                  |  2 +-
 Marlin/src/HAL/DUE/usb/udi.h                  |  2 +-
 Marlin/src/HAL/DUE/usb/udi_cdc.c              |  2 +-
 Marlin/src/HAL/DUE/usb/udi_cdc.h              |  4 ++--
 Marlin/src/HAL/DUE/usb/udi_cdc_conf.h         |  2 +-
 Marlin/src/HAL/DUE/usb/udi_cdc_desc.c         |  2 +-
 Marlin/src/HAL/DUE/usb/udi_composite_desc.c   |  2 +-
 Marlin/src/HAL/DUE/usb/udi_msc.c              |  2 +-
 Marlin/src/HAL/DUE/usb/udi_msc.h              |  4 ++--
 Marlin/src/HAL/DUE/usb/uotghs_device_due.c    |  2 +-
 Marlin/src/HAL/DUE/usb/uotghs_device_due.h    |  2 +-
 Marlin/src/HAL/DUE/usb/uotghs_otg.h           |  2 +-
 Marlin/src/HAL/DUE/usb/usb_protocol.h         |  2 +-
 Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h     |  2 +-
 Marlin/src/HAL/DUE/usb/usb_protocol_msc.h     |  2 +-
 Marlin/src/HAL/DUE/usb/usb_task.c             |  2 +-
 Marlin/src/HAL/DUE/usb/usb_task.h             |  2 +-
 Marlin/src/HAL/LINUX/fastio.h                 |  2 +-
 Marlin/src/HAL/LPC1768/fastio.h               |  2 +-
 Marlin/src/HAL/STM32F1/SPI.cpp                |  2 +-
 Marlin/src/HAL/TEENSY31_32/fastio.h           |  2 +-
 Marlin/src/HAL/TEENSY35_36/fastio.h           |  2 +-
 .../src/HAL/shared/backtrace/unwarmbytab.cpp  |  2 +-
 Marlin/src/feature/dac/dac_mcp4728.cpp        |  2 +-
 Marlin/src/gcode/motion/G5.cpp                |  2 +-
 .../ftdi_eve_lib/basic/boards.h               |  8 +++----
 Marlin/src/module/scara.cpp                   |  2 +-
 Marlin/src/module/thermistor/thermistor_2.h   |  2 +-
 Marlin/src/module/thermistor/thermistor_5.h   |  2 +-
 Marlin/src/module/thermistor/thermistor_52.h  |  2 +-
 Marlin/src/module/thermistor/thermistor_55.h  |  2 +-
 Marlin/src/pins/sam/pins_ALLIGATOR_R2.h       |  2 +-
 Marlin/src/pins/sanguino/pins_OMCA.h          |  4 ++--
 .../src/pins/stm32f4/pins_BLACK_STM32F407VE.h |  2 +-
 Marlin/src/sd/SdFatStructs.h                  |  2 +-
 Marlin/src/sd/SdInfo.h                        |  2 +-
 README.md                                     | 10 ++++----
 .../etc/udev/rules.d/99-platformio-udev.rules |  4 ++--
 .../PlatformIO/boards/BigTree_Btt002.json     |  2 +-
 .../PlatformIO/boards/BigTree_GTR_v1.json     |  2 +-
 .../PlatformIO/boards/BigTree_SKR_Pro.json    |  2 +-
 .../share/PlatformIO/boards/CHITU_F103.json   |  2 +-
 .../share/PlatformIO/boards/FLYF407ZG.json    |  2 +-
 buildroot/share/PlatformIO/boards/LERDGE.json |  2 +-
 .../PlatformIO/boards/blackSTM32F407VET6.json |  2 +-
 .../share/PlatformIO/boards/malyanM200.json   |  2 +-
 buildroot/share/fonts/README.md               |  4 ++--
 buildroot/share/fonts/uxggenpages.md          |  4 ++--
 .../scripts/createTemperatureLookupMarlin.py  |  4 ++--
 buildroot/share/vscode/avrdude.conf           | 24 +++++++++----------
 buildroot/share/vscode/avrdude_linux.conf     | 24 +++++++++----------
 buildroot/share/vscode/avrdude_macOS.conf     | 10 ++++----
 platformio.ini                                |  2 +-
 83 files changed, 132 insertions(+), 131 deletions(-)

diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml
index 70734d4972..a973242932 100644
--- a/.github/FUNDING.yml
+++ b/.github/FUNDING.yml
@@ -1,3 +1,3 @@
 github: [thinkyhead]
 patreon: thinkyhead
-custom: ["http://www.thinkyhead.com/donate-to-marlin"]
+custom: ["https://www.thinkyhead.com/donate-to-marlin"]
diff --git a/.github/contributing.md b/.github/contributing.md
index 589f14581a..6bc7b5a005 100644
--- a/.github/contributing.md
+++ b/.github/contributing.md
@@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
-* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
+* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
 * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
 
-If chat is more your speed, you can join the MarlinFirmware Slack team:
+If chat is more your speed, you can join the MarlinFirmware Discord server:
 
-* Join the Marlin Slack Team
-  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
-  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond &mdash; please be patient!
-  * Use the `#general` channel for general questions or discussion about Marlin.
-  * Other channels exist for certain topics. Check the channel list.
+* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Even though our Discord is pretty active, it may take a while for community members to respond &mdash; please be patient!
+* Use the `#general` channel for general questions or discussion about Marlin.
+* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
 
 ## How Can I Contribute?
 
diff --git a/.github/issue_template.md b/.github/issue_template.md
index ecfb36f0d5..6cb34b8f58 100644
--- a/.github/issue_template.md
+++ b/.github/issue_template.md
@@ -2,9 +2,13 @@
 
 Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options:
 
-Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
+- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
+- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
+- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
+
+Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.
 
 -->
 
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 7804452561..c11b02bc52 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -473,7 +473,7 @@
 //===========================================================================
 //============================= PID Settings ================================
 //===========================================================================
-// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
+// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
 
 // Comment the following line to disable PID and enable bang-bang.
 #define PIDTEMP
diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino
index 213c18a94e..57c825445f 100644
--- a/Marlin/Marlin.ino
+++ b/Marlin/Marlin.ino
@@ -37,7 +37,7 @@ Configuration
 
 Getting Help
 
-  - http://forums.reprap.org/list.php?415
+  - https://reprap.org/forum/list.php?415
     The Marlin Discussion Forum is a great place to get help from other Marlin
     users who may have experienced similar issues to your own.
 
diff --git a/Marlin/src/HAL/AVR/fastio.h b/Marlin/src/HAL/AVR/fastio.h
index c3239186ba..bd6935aaf0 100644
--- a/Marlin/src/HAL/AVR/fastio.h
+++ b/Marlin/src/HAL/AVR/fastio.h
@@ -57,7 +57,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
diff --git a/Marlin/src/HAL/DUE/Tone.cpp b/Marlin/src/HAL/DUE/Tone.cpp
index e6c72c728b..9beb602223 100644
--- a/Marlin/src/HAL/DUE/Tone.cpp
+++ b/Marlin/src/HAL/DUE/Tone.cpp
@@ -24,7 +24,7 @@
 
 /**
  * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/fastio.h b/Marlin/src/HAL/DUE/fastio.h
index 9d6bfa164a..286319302d 100644
--- a/Marlin/src/HAL/DUE/fastio.h
+++ b/Marlin/src/HAL/DUE/fastio.h
@@ -58,7 +58,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 // Read a pin
diff --git a/Marlin/src/HAL/DUE/usb/arduino_due_x.h b/Marlin/src/HAL/DUE/usb/arduino_due_x.h
index 7355f74f6d..b5be621791 100644
--- a/Marlin/src/HAL/DUE/usb/arduino_due_x.h
+++ b/Marlin/src/HAL/DUE/usb/arduino_due_x.h
@@ -43,7 +43,7 @@
 #pragma once
 
 /**
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 /**
diff --git a/Marlin/src/HAL/DUE/usb/compiler.h b/Marlin/src/HAL/DUE/usb/compiler.h
index 33df080e2f..7b746543c4 100644
--- a/Marlin/src/HAL/DUE/usb/compiler.h
+++ b/Marlin/src/HAL/DUE/usb/compiler.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UTILS_COMPILER_H
diff --git a/Marlin/src/HAL/DUE/usb/conf_access.h b/Marlin/src/HAL/DUE/usb/conf_access.h
index fdac1ab7e8..f401685223 100644
--- a/Marlin/src/HAL/DUE/usb/conf_access.h
+++ b/Marlin/src/HAL/DUE/usb/conf_access.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_ACCESS_H_
diff --git a/Marlin/src/HAL/DUE/usb/conf_clock.h b/Marlin/src/HAL/DUE/usb/conf_clock.h
index d0f68500ad..97e70e99a5 100644
--- a/Marlin/src/HAL/DUE/usb/conf_clock.h
+++ b/Marlin/src/HAL/DUE/usb/conf_clock.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CONF_CLOCK_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/conf_usb.h b/Marlin/src/HAL/DUE/usb/conf_usb.h
index 7beb9b0bba..4de9e347e2 100644
--- a/Marlin/src/HAL/DUE/usb/conf_usb.h
+++ b/Marlin/src/HAL/DUE/usb/conf_usb.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_USB_H_
diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.c b/Marlin/src/HAL/DUE/usb/ctrl_access.c
index 0ec14e0b8f..99f97f62cb 100644
--- a/Marlin/src/HAL/DUE/usb/ctrl_access.c
+++ b/Marlin/src/HAL/DUE/usb/ctrl_access.c
@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.h b/Marlin/src/HAL/DUE/usb/ctrl_access.h
index af6c8ceb96..b33839076e 100644
--- a/Marlin/src/HAL/DUE/usb/ctrl_access.h
+++ b/Marlin/src/HAL/DUE/usb/ctrl_access.h
@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 
diff --git a/Marlin/src/HAL/DUE/usb/genclk.h b/Marlin/src/HAL/DUE/usb/genclk.h
index 895aba0352..cde03bc0d1 100644
--- a/Marlin/src/HAL/DUE/usb/genclk.h
+++ b/Marlin/src/HAL/DUE/usb/genclk.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_GENCLK_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/mrepeat.h b/Marlin/src/HAL/DUE/usb/mrepeat.h
index 5a2017be99..8363d9cde3 100644
--- a/Marlin/src/HAL/DUE/usb/mrepeat.h
+++ b/Marlin/src/HAL/DUE/usb/mrepeat.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _MREPEAT_H_
diff --git a/Marlin/src/HAL/DUE/usb/osc.h b/Marlin/src/HAL/DUE/usb/osc.h
index 3a9543507b..953bcbbed1 100644
--- a/Marlin/src/HAL/DUE/usb/osc.h
+++ b/Marlin/src/HAL/DUE/usb/osc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_OSC_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/pll.h b/Marlin/src/HAL/DUE/usb/pll.h
index d3d2174870..8eaf27672b 100644
--- a/Marlin/src/HAL/DUE/usb/pll.h
+++ b/Marlin/src/HAL/DUE/usb/pll.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_PLL_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/preprocessor.h b/Marlin/src/HAL/DUE/usb/preprocessor.h
index 184c03ae71..c12d01cb64 100644
--- a/Marlin/src/HAL/DUE/usb/preprocessor.h
+++ b/Marlin/src/HAL/DUE/usb/preprocessor.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _PREPROCESSOR_H_
diff --git a/Marlin/src/HAL/DUE/usb/sbc_protocol.h b/Marlin/src/HAL/DUE/usb/sbc_protocol.h
index 082b735fa6..ab845739fd 100644
--- a/Marlin/src/HAL/DUE/usb/sbc_protocol.h
+++ b/Marlin/src/HAL/DUE/usb/sbc_protocol.h
@@ -52,7 +52,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _SBC_PROTOCOL_H_
 #define _SBC_PROTOCOL_H_
diff --git a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
index 6df82c146b..d77e4f9523 100644
--- a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
+++ b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h
@@ -42,7 +42,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 
diff --git a/Marlin/src/HAL/DUE/usb/spc_protocol.h b/Marlin/src/HAL/DUE/usb/spc_protocol.h
index 6fadb9f36c..d67cc5c788 100644
--- a/Marlin/src/HAL/DUE/usb/spc_protocol.h
+++ b/Marlin/src/HAL/DUE/usb/spc_protocol.h
@@ -45,7 +45,7 @@
  */
 
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _SPC_PROTOCOL_H_
 #define _SPC_PROTOCOL_H_
diff --git a/Marlin/src/HAL/DUE/usb/stringz.h b/Marlin/src/HAL/DUE/usb/stringz.h
index b914b73489..fc9aaf38a4 100644
--- a/Marlin/src/HAL/DUE/usb/stringz.h
+++ b/Marlin/src/HAL/DUE/usb/stringz.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _STRINGZ_H_
diff --git a/Marlin/src/HAL/DUE/usb/sysclk.c b/Marlin/src/HAL/DUE/usb/sysclk.c
index 899244dd88..cbb4e2c9ef 100644
--- a/Marlin/src/HAL/DUE/usb/sysclk.c
+++ b/Marlin/src/HAL/DUE/usb/sysclk.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/sysclk.h b/Marlin/src/HAL/DUE/usb/sysclk.h
index 48c99de298..16db8c86d3 100644
--- a/Marlin/src/HAL/DUE/usb/sysclk.h
+++ b/Marlin/src/HAL/DUE/usb/sysclk.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_SYSCLK_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/tpaste.h b/Marlin/src/HAL/DUE/usb/tpaste.h
index f8ec44a41d..2ad3f2758e 100644
--- a/Marlin/src/HAL/DUE/usb/tpaste.h
+++ b/Marlin/src/HAL/DUE/usb/tpaste.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _TPASTE_H_
diff --git a/Marlin/src/HAL/DUE/usb/udc.c b/Marlin/src/HAL/DUE/usb/udc.c
index 048a902d3b..60bf0cfff3 100644
--- a/Marlin/src/HAL/DUE/usb/udc.c
+++ b/Marlin/src/HAL/DUE/usb/udc.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/udc.h b/Marlin/src/HAL/DUE/usb/udc.h
index 885bdf04d6..8d92eb5c03 100644
--- a/Marlin/src/HAL/DUE/usb/udc.h
+++ b/Marlin/src/HAL/DUE/usb/udc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDC_H_
diff --git a/Marlin/src/HAL/DUE/usb/udc_desc.h b/Marlin/src/HAL/DUE/usb/udc_desc.h
index 88ed08a961..052ca08eca 100644
--- a/Marlin/src/HAL/DUE/usb/udc_desc.h
+++ b/Marlin/src/HAL/DUE/usb/udc_desc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDC_DESC_H_
diff --git a/Marlin/src/HAL/DUE/usb/udd.h b/Marlin/src/HAL/DUE/usb/udd.h
index c87763de23..7ec8c03dee 100644
--- a/Marlin/src/HAL/DUE/usb/udd.h
+++ b/Marlin/src/HAL/DUE/usb/udd.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDD_H_
diff --git a/Marlin/src/HAL/DUE/usb/udi.h b/Marlin/src/HAL/DUE/usb/udi.h
index 709908cad9..febf03b718 100644
--- a/Marlin/src/HAL/DUE/usb/udi.h
+++ b/Marlin/src/HAL/DUE/usb/udi.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDI_H_
diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.c b/Marlin/src/HAL/DUE/usb/udi_cdc.c
index 60c9546ce2..cbe23dbb68 100644
--- a/Marlin/src/HAL/DUE/usb/udi_cdc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.h b/Marlin/src/HAL/DUE/usb/udi_cdc.h
index 526419c860..0ecf7bb00e 100644
--- a/Marlin/src/HAL/DUE/usb/udi_cdc.h
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDI_CDC_H_
@@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
  * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
  *
  * Also, you can refer to application note
- * <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
+ * <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
  * AVR4902 ASF - USB Composite Device</A>.
  *
  * \section udi_cdc_use_case_composite_setup Setup steps
diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h
index cbd3eb00ae..d406a87743 100644
--- a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDI_CDC_CONF_H_
diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c
index 8f730ba823..97c334e2a8 100644
--- a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c
index 07bdd1b9d6..da74fbe60d 100644
--- a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.c b/Marlin/src/HAL/DUE/usb/udi_msc.c
index 627bca0d4f..b7c3bb5ea0 100644
--- a/Marlin/src/HAL/DUE/usb/udi_msc.c
+++ b/Marlin/src/HAL/DUE/usb/udi_msc.c
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.h b/Marlin/src/HAL/DUE/usb/udi_msc.h
index c632ee4aac..730dbc8eec 100644
--- a/Marlin/src/HAL/DUE/usb/udi_msc.h
+++ b/Marlin/src/HAL/DUE/usb/udi_msc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _UDI_MSC_H_
@@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
  * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
  *
  * Also, you can refer to application note
- * <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
+ * <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
  * AVR4902 ASF - USB Composite Device</A>.
  *
  * \section udi_msc_use_case_composite_setup Setup steps
diff --git a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c
index 2a10190c7e..e13232a39c 100644
--- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c
+++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c
@@ -42,7 +42,7 @@
  */
 
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h
index 97877994bf..6df26d63df 100644
--- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h
+++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UOTGHS_DEVICE_DUE_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/uotghs_otg.h b/Marlin/src/HAL/DUE/usb/uotghs_otg.h
index 86c903b2c1..eca5e938bb 100644
--- a/Marlin/src/HAL/DUE/usb/uotghs_otg.h
+++ b/Marlin/src/HAL/DUE/usb/uotghs_otg.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UOTGHS_OTG_H_INCLUDED
diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol.h b/Marlin/src/HAL/DUE/usb/usb_protocol.h
index 31c783f974..ea51a86896 100644
--- a/Marlin/src/HAL/DUE/usb/usb_protocol.h
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol.h
@@ -44,7 +44,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _USB_PROTOCOL_H_
diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
index 49fc7387ef..d594db52e3 100644
--- a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _USB_PROTOCOL_CDC_H_
 #define _USB_PROTOCOL_CDC_H_
diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
index db8f9cafd0..0fef308046 100644
--- a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
+++ b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _USB_PROTOCOL_MSC_H_
diff --git a/Marlin/src/HAL/DUE/usb/usb_task.c b/Marlin/src/HAL/DUE/usb/usb_task.c
index 29d02faef7..66bdb265d8 100644
--- a/Marlin/src/HAL/DUE/usb/usb_task.c
+++ b/Marlin/src/HAL/DUE/usb/usb_task.c
@@ -41,7 +41,7 @@
  *
  */
 
-// Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+// Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 
 #ifdef ARDUINO_ARCH_SAM
 
diff --git a/Marlin/src/HAL/DUE/usb/usb_task.h b/Marlin/src/HAL/DUE/usb/usb_task.h
index fad62fda50..e9831ae062 100644
--- a/Marlin/src/HAL/DUE/usb/usb_task.h
+++ b/Marlin/src/HAL/DUE/usb/usb_task.h
@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _USB_TASK_H_
diff --git a/Marlin/src/HAL/LINUX/fastio.h b/Marlin/src/HAL/LINUX/fastio.h
index 8f18d6ab60..4567c62a51 100644
--- a/Marlin/src/HAL/LINUX/fastio.h
+++ b/Marlin/src/HAL/LINUX/fastio.h
@@ -44,7 +44,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
  */
 
 /// Read a pin
diff --git a/Marlin/src/HAL/LPC1768/fastio.h b/Marlin/src/HAL/LPC1768/fastio.h
index 31cd8772d1..c553ffb182 100644
--- a/Marlin/src/HAL/LPC1768/fastio.h
+++ b/Marlin/src/HAL/LPC1768/fastio.h
@@ -56,7 +56,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
  */
 
 /// Read a pin
diff --git a/Marlin/src/HAL/STM32F1/SPI.cpp b/Marlin/src/HAL/STM32F1/SPI.cpp
index 991ceb3148..80095ba1dc 100644
--- a/Marlin/src/HAL/STM32F1/SPI.cpp
+++ b/Marlin/src/HAL/STM32F1/SPI.cpp
@@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) {
   /**
    * Notes:
    * As far as we know the AVR numbers for dataMode match the numbers required by the STM32.
-   * From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4
+   * From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4
    *
    * SPI Mode  CPOL  CPHA  Shift SCK-edge  Capture SCK-edge
    * 0       0     0     Falling     Rising
diff --git a/Marlin/src/HAL/TEENSY31_32/fastio.h b/Marlin/src/HAL/TEENSY31_32/fastio.h
index c564a71835..9a299de9c7 100644
--- a/Marlin/src/HAL/TEENSY31_32/fastio.h
+++ b/Marlin/src/HAL/TEENSY31_32/fastio.h
@@ -39,7 +39,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
  */
 
 #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
diff --git a/Marlin/src/HAL/TEENSY35_36/fastio.h b/Marlin/src/HAL/TEENSY35_36/fastio.h
index c564a71835..9a299de9c7 100644
--- a/Marlin/src/HAL/TEENSY35_36/fastio.h
+++ b/Marlin/src/HAL/TEENSY35_36/fastio.h
@@ -39,7 +39,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
  */
 
 #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
diff --git a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp
index 207cd56aa8..f524673ecd 100644
--- a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp
+++ b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp
@@ -4,7 +4,7 @@
  *
  * This Source Code Form is subject to the terms of the Mozilla Public
  * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ * file, You can obtain one at https://mozilla.org/MPL/2.0/.
  *
  * This library was modified, some bugs fixed, stack address validated
  * and adapted to be used in Marlin 3D printer firmware as backtracer
diff --git a/Marlin/src/feature/dac/dac_mcp4728.cpp b/Marlin/src/feature/dac/dac_mcp4728.cpp
index 90ad31290f..4976b36907 100644
--- a/Marlin/src/feature/dac/dac_mcp4728.cpp
+++ b/Marlin/src/feature/dac/dac_mcp4728.cpp
@@ -24,7 +24,7 @@
  * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
  *
  * For implementation details, please take a look at the datasheet:
- * http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
+ * https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
  *
  * For discussion and feedback, please go to:
  * https://arduino.cc/forum/index.php/topic,51842.0.html
diff --git a/Marlin/src/gcode/motion/G5.cpp b/Marlin/src/gcode/motion/G5.cpp
index 804db5a742..35cc428023 100644
--- a/Marlin/src/gcode/motion/G5.cpp
+++ b/Marlin/src/gcode/motion/G5.cpp
@@ -29,7 +29,7 @@
 
 /**
  * Parameters interpreted according to:
- * http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline
+ * https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline
  * However I, J omission is not supported at this point; all
  * parameters can be omitted and default to zero.
  */
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
index e431cfde1f..c09d10f148 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
@@ -113,9 +113,9 @@
 
 /**
  * Settings for the 4D Systems,        4.3" Embedded SPI Display             480x272, SPI, FT800 (4DLCD-FT843)
- *  http://www.4dsystems.com.au/product/4DLCD_FT843/
+ *  https://4dsystems.com.au/4dlcd-ft843
  * Datasheet:
- *  http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf
+ *  https://4dsystems.com.au/mwdownloads/download/link/id/52/
  */
 #elif defined(LCD_4DSYSTEMS_4DLCD_FT843)
   #if !HAS_RESOLUTION
@@ -136,9 +136,7 @@
 
 /**
  * Settings for the Aleph Objects Color LCD User Interface
- *  https://code.alephobjects.com/source/aotctl/
- * Datasheet:
- *  http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
+ * Datasheet https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
  */
 #elif defined(LCD_ALEPHOBJECTS_CLCD_UI)
   #if !HAS_RESOLUTION
diff --git a/Marlin/src/module/scara.cpp b/Marlin/src/module/scara.cpp
index 6c961827c7..e4b2f0b75c 100644
--- a/Marlin/src/module/scara.cpp
+++ b/Marlin/src/module/scara.cpp
@@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) {
     /**
      * Morgan SCARA Inverse Kinematics. Results in 'delta'.
      *
-     * See http://forums.reprap.org/read.php?185,283327
+     * See https://reprap.org/forum/read.php?185,283327
      *
      * Maths and first version by QHARLEY.
      * Integrated into Marlin and slightly restructured by Joachim Cerny.
diff --git a/Marlin/src/module/thermistor/thermistor_2.h b/Marlin/src/module/thermistor/thermistor_2.h
index f07de0b537..d0e1e4f3df 100644
--- a/Marlin/src/module/thermistor/thermistor_2.h
+++ b/Marlin/src/module/thermistor/thermistor_2.h
@@ -23,7 +23,7 @@
 
 //
 // R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 //
 const temp_entry_t temptable_2[] PROGMEM = {
diff --git a/Marlin/src/module/thermistor/thermistor_5.h b/Marlin/src/module/thermistor/thermistor_5.h
index 5d2c3e7b04..1d5fa2fec7 100644
--- a/Marlin/src/module/thermistor/thermistor_5.h
+++ b/Marlin/src/module/thermistor/thermistor_5.h
@@ -24,7 +24,7 @@
 // R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
 // 100k ParCan thermistor (104GT-2)
 // ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 const temp_entry_t temptable_5[] PROGMEM = {
   { OV(   1), 713 },
diff --git a/Marlin/src/module/thermistor/thermistor_52.h b/Marlin/src/module/thermistor/thermistor_52.h
index 69666add20..5c9cb9dc4d 100644
--- a/Marlin/src/module/thermistor/thermistor_52.h
+++ b/Marlin/src/module/thermistor/thermistor_52.h
@@ -23,7 +23,7 @@
 
 // R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
 // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: More resolution and better linearity from 150C to 200C
 const temp_entry_t temptable_52[] PROGMEM = {
diff --git a/Marlin/src/module/thermistor/thermistor_55.h b/Marlin/src/module/thermistor/thermistor_55.h
index 2966d064eb..707b7d420a 100644
--- a/Marlin/src/module/thermistor/thermistor_55.h
+++ b/Marlin/src/module/thermistor/thermistor_55.h
@@ -23,7 +23,7 @@
 
 // R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
 // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
-// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
+// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
 // Advantage: More resolution and better linearity from 150C to 200C
 const temp_entry_t temptable_55[] PROGMEM = {
diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
index dfe077ee4d..7cd81456b1 100644
--- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
+++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
@@ -23,7 +23,7 @@
 
 /**
  * Alligator Board R2
- * http://www.3dartists.org/
+ * https://reprap.org/wiki/Alligator_Board
  */
 
 #ifndef __SAM3X8E__
diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h
index eb5786dd11..8e4c6d2b64 100644
--- a/Marlin/src/pins/sanguino/pins_OMCA.h
+++ b/Marlin/src/pins/sanguino/pins_OMCA.h
@@ -49,7 +49,7 @@
  *       PWM (D 14) PD6 20|        |21  PD7 (D 15) PWM
  *                        +--------+
  *
- * REF http://sanguino.cc/hardware
+ * REF http://sanguino.wikidot.com/hardware
  */
 
 /**
@@ -70,7 +70,7 @@
  *
  * When installing select 1.0.2
  *
- * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino
  * Just use the above JSON URL instead of Sparkfun's JSON.
  *
  * Once installed select the Sanguino board and then select the CPU.
diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
index e0e827262f..e6350f71dc 100644
--- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
+++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
@@ -23,7 +23,7 @@
 
 /**
  * STM32F407VET6 with RAMPS-like shield
- * 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
+ * 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485
  * Shield - https://github.com/jmz52/Hardware
  */
 
diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h
index dc6fb7d263..e06e05981a 100644
--- a/Marlin/src/sd/SdFatStructs.h
+++ b/Marlin/src/sd/SdFatStructs.h
@@ -39,7 +39,7 @@
 
 /**
  * mostly from Microsoft document fatgen103.doc
- * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
+ * https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
  */
 
 uint8_t const BOOTSIG0 = 0x55,          // Value for byte 510 of boot block or MBR
diff --git a/Marlin/src/sd/SdInfo.h b/Marlin/src/sd/SdInfo.h
index 4affa21c50..bfa5a01ae2 100644
--- a/Marlin/src/sd/SdInfo.h
+++ b/Marlin/src/sd/SdInfo.h
@@ -39,7 +39,7 @@
 // Version 3.01
 // May 18, 2010
 //
-// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
+// https://www.sdcard.org/downloads/pls/index.html
 
 // SD card commands
 uint8_t const CMD0 = 0x00,    // GO_IDLE_STATE - init card in spi mode if CS low
diff --git a/README.md b/README.md
index 00ed7e96fd..042cf3303b 100644
--- a/README.md
+++ b/README.md
@@ -52,8 +52,8 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level
 
   boards|processor|speed|flash|sram|logic|fpu
   ----|---------|-----|-----|----|-----|---
-  [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
-  [MKS SBASE](http://forums.reprap.org/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
+  [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](https://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
+  [MKS SBASE](https://reprap.org/forum/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
   [Selena Compact](https://github.com/Ales2-k/Selena)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
   [Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no
   [Smoothieboard](https://reprap.org/wiki/Smoothieboard)|LPC1769 ARM-Cortex M3|120MHz|512k|64k|3.3-5V|no
@@ -75,7 +75,7 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level
 
   boards|processor|speed|flash|sram|logic|fpu
   ----|---------|-----|-----|----|-----|---
-  [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](http://www.st.com/en/microcontrollers/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
+  [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](https://www.st.com/en/microcontrollers-microprocessors/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
 
   #### Teensy++ 2.0
 
@@ -110,12 +110,12 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.
 
 The current Marlin dev team consists of:
 
- - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA &nbsp; [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](http://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
+ - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA &nbsp; [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](https://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
  - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA
  - Chris Pepper [[@p3p](https://github.com/p3p)] - UK
  - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
  - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal
- - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
+ - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
 
 ## License
 
diff --git a/buildroot/etc/udev/rules.d/99-platformio-udev.rules b/buildroot/etc/udev/rules.d/99-platformio-udev.rules
index 6daaf922bf..3c829882d1 100644
--- a/buildroot/etc/udev/rules.d/99-platformio-udev.rules
+++ b/buildroot/etc/udev/rules.d/99-platformio-udev.rules
@@ -4,7 +4,7 @@
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
-#    http://www.apache.org/licenses/LICENSE-2.0
+#    https://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
@@ -16,7 +16,7 @@
 #
 # INSTALLATION
 #
-# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
+# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
 #
 #####################################################################################
 
diff --git a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json
index ef3333cbb9..d0d092f1ea 100644
--- a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json
+++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json
@@ -41,6 +41,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407vg.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json b/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json
index 669a7520bb..32236301c3 100644
--- a/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json
+++ b/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json
@@ -41,6 +41,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json
index 357b3acca9..211ceacdca 100644
--- a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json
+++ b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json
@@ -41,6 +41,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/CHITU_F103.json b/buildroot/share/PlatformIO/boards/CHITU_F103.json
index ab772aea07..ecf7bff66c 100644
--- a/buildroot/share/PlatformIO/boards/CHITU_F103.json
+++ b/buildroot/share/PlatformIO/boards/CHITU_F103.json
@@ -43,6 +43,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f103ze.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f103ze.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/FLYF407ZG.json b/buildroot/share/PlatformIO/boards/FLYF407ZG.json
index 060b50ee8c..7e585c5057 100644
--- a/buildroot/share/PlatformIO/boards/FLYF407ZG.json
+++ b/buildroot/share/PlatformIO/boards/FLYF407ZG.json
@@ -59,6 +59,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/LERDGE.json b/buildroot/share/PlatformIO/boards/LERDGE.json
index b3e4ca44fa..21df8db48e 100644
--- a/buildroot/share/PlatformIO/boards/LERDGE.json
+++ b/buildroot/share/PlatformIO/boards/LERDGE.json
@@ -59,6 +59,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json
index 1778ddaaf0..1765634086 100644
--- a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json
+++ b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json
@@ -59,6 +59,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/en/microcontrollers/stm32f407ve.html",
+  "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/PlatformIO/boards/malyanM200.json b/buildroot/share/PlatformIO/boards/malyanM200.json
index bd783fe899..4dbf760774 100644
--- a/buildroot/share/PlatformIO/boards/malyanM200.json
+++ b/buildroot/share/PlatformIO/boards/malyanM200.json
@@ -30,6 +30,6 @@
     "use_1200bps_touch": false,
     "wait_for_upload_port": false
   },
-  "url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
+  "url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
   "vendor": "Generic"
 }
diff --git a/buildroot/share/fonts/README.md b/buildroot/share/fonts/README.md
index f8f780661f..cc09b52810 100644
--- a/buildroot/share/fonts/README.md
+++ b/buildroot/share/fonts/README.md
@@ -5,7 +5,7 @@
 The original author of the following font files is [A. Hardtung](https://github.com/AnHardt).
 
 Any copyright is dedicated to the Public Domain.
-http://creativecommons.org/publicdomain/zero/1.0/
+https://creativecommons.org/publicdomain/zero/1.0/
 
  - HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
  - HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
@@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri
 
 
 ## Documentation
-For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
+For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
diff --git a/buildroot/share/fonts/uxggenpages.md b/buildroot/share/fonts/uxggenpages.md
index c2d94735c7..5e40c392f7 100644
--- a/buildroot/share/fonts/uxggenpages.md
+++ b/buildroot/share/fonts/uxggenpages.md
@@ -99,11 +99,11 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat
 
 - [WQY](http://wenq.org/)
 - [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz)
-- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html)
+- [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html)
 
 Documents related to the old version of the language engine:
 
-- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html)
+- [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html)
 - [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html)
 - [U8GLIB](https://github.com/olikraus/u8glib.git)
 - [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git)
diff --git a/buildroot/share/scripts/createTemperatureLookupMarlin.py b/buildroot/share/scripts/createTemperatureLookupMarlin.py
index 03450bc0e0..b2d8964f55 100755
--- a/buildroot/share/scripts/createTemperatureLookupMarlin.py
+++ b/buildroot/share/scripts/createTemperatureLookupMarlin.py
@@ -2,10 +2,10 @@
 """Thermistor Value Lookup Table Generator
 
 Generates lookup to temperature values for use in a microcontroller in C format based on:
-http://en.wikipedia.org/wiki/Steinhart-Hart_equation
+https://en.wikipedia.org/wiki/Steinhart-Hart_equation
 
 The main use is for Arduino programs that read data from the circuit board described here:
-http://reprap.org/wiki/Temperature_Sensor_v2.0
+https://reprap.org/wiki/Temperature_Sensor_v2.0
 
 Usage: python createTemperatureLookupMarlin.py [options]
 
diff --git a/buildroot/share/vscode/avrdude.conf b/buildroot/share/vscode/avrdude.conf
index 1194847f77..10b39a27d2 100644
--- a/buildroot/share/vscode/avrdude.conf
+++ b/buildroot/share/vscode/avrdude.conf
@@ -147,7 +147,7 @@
 #     This flag was added to work around a problem with the
 #     at90s4433/2333's; see the at90s4433 errata at:
 #
-#         http://www.atmel.com/atmel/acrobat/doc1280.pdf
+#         https://www.atmel.com/atmel/acrobat/doc1280.pdf
 #
 # INSTRUCTION FORMATS
 #
@@ -184,7 +184,7 @@
 # section avr061.zip which accompanies the application note
 # AVR061 available from:
 #
-#      http://www.atmel.com/atmel/acrobat/doc2525.pdf
+#      https://www.atmel.com/atmel/acrobat/doc2525.pdf
 #
 
 #define ATTINY10    0x10  /* the _old_ one that never existed! */
@@ -416,13 +416,13 @@ programmer
 
 programmer
   id    = "usbasp";
-  desc  = "USBasp, http://www.fischl.de/usbasp/";
+  desc  = "USBasp, https://www.fischl.de/usbasp/";
   type  = usbasp;
 ;
 
 programmer
   id    = "usbtiny";
-  desc  = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
+  desc  = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
   type  = usbtiny;
 ;
 
@@ -596,7 +596,7 @@ programmer
 
 programmer
   id    = "bsd";
-  desc  = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
+  desc  = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/";
   type  = par;
   vcc   = 2, 3, 4, 5;
   reset = 7;
@@ -655,7 +655,7 @@ programmer
 
 programmer
   id     = "alf";
-  desc   = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
+  desc   = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/";
   type   = par;
   vcc    = 2, 3, 4, 5;
   buff   = 6;
@@ -682,7 +682,7 @@ programmer
 
 programmer
   id     = "picoweb";
-  desc   = "Picoweb Programming Cable, http://www.picoweb.net/";
+  desc   = "Picoweb Programming Cable, https://www.picoweb.net/";
   type   = par;
   reset  = 2;
   sck    = 3;
@@ -743,7 +743,7 @@ programmer
 
 programmer
   id    = "atisp";
-  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
+  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th/> micro-research.co.th";
   type  = par;
   reset = ~6;
   sck   = ~8;
@@ -753,7 +753,7 @@ programmer
 
 programmer
   id    = "ere-isp-avr";
-  desc  = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
+  desc  = "ERE ISP-AVR <https://www.ere.co.th/download/sch050713.pdf>";
   type  = par;
   reset = ~4;
   sck   = 3;
@@ -773,7 +773,7 @@ programmer
 ;
 
 # It is almost same as pony-stk200, except vcc on pin 5 to auto
-# disconnect port (download on http://electropol.free.fr)
+# disconnect port (download on https://electropol.free.fr)
 programmer
   id    = "frank-stk200";
   desc  = "Frank STK200";
@@ -787,7 +787,7 @@ programmer
 ;
 
 # The AT98ISP Cable is a simple parallel dongle for AT89 family.
-# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
+# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
 programmer
 id = "89isp";
 desc = "Atmel at89isp cable";
@@ -836,7 +836,7 @@ programmer
 
 programmer
   id    = "siprog";
-  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
+  desc  = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
   type  = serbb;
   reset = ~3;
   sck   = 7;
diff --git a/buildroot/share/vscode/avrdude_linux.conf b/buildroot/share/vscode/avrdude_linux.conf
index 46e7ace34b..b1eca4e319 100644
--- a/buildroot/share/vscode/avrdude_linux.conf
+++ b/buildroot/share/vscode/avrdude_linux.conf
@@ -147,7 +147,7 @@
 #     This flag was added to work around a problem with the
 #     at90s4433/2333's; see the at90s4433 errata at:
 #
-#         http://www.atmel.com/atmel/acrobat/doc1280.pdf
+#         https://www.atmel.com/atmel/acrobat/doc1280.pdf
 #
 # INSTRUCTION FORMATS
 #
@@ -184,7 +184,7 @@
 # section avr061.zip which accompanies the application note
 # AVR061 available from:
 #
-#      http://www.atmel.com/atmel/acrobat/doc2525.pdf
+#      https://www.atmel.com/atmel/acrobat/doc2525.pdf
 #
 
 #define ATTINY10    0x10  /* the _old_ one that never existed! */
@@ -416,13 +416,13 @@ programmer
 
 programmer
   id    = "usbasp";
-  desc  = "USBasp, http://www.fischl.de/usbasp/";
+  desc  = "USBasp, https://www.fischl.de/usbasp/";
   type  = usbasp;
 ;
 
 programmer
   id    = "usbtiny";
-  desc  = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
+  desc  = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
   type  = usbtiny;
 ;
 
@@ -596,7 +596,7 @@ programmer
 
 programmer
   id    = "bsd";
-  desc  = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
+  desc  = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/";
   type  = par;
   vcc   = 2, 3, 4, 5;
   reset = 7;
@@ -655,7 +655,7 @@ programmer
 
 programmer
   id     = "alf";
-  desc   = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
+  desc   = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/";
   type   = par;
   vcc    = 2, 3, 4, 5;
   buff   = 6;
@@ -682,7 +682,7 @@ programmer
 
 programmer
   id     = "picoweb";
-  desc   = "Picoweb Programming Cable, http://www.picoweb.net/";
+  desc   = "Picoweb Programming Cable, https://www.picoweb.net/";
   type   = par;
   reset  = 2;
   sck    = 3;
@@ -743,7 +743,7 @@ programmer
 
 programmer
   id    = "atisp";
-  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
+  desc  = "AT-ISP V1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th/> micro-research.co.th";
   type  = par;
   reset = ~6;
   sck   = ~8;
@@ -753,7 +753,7 @@ programmer
 
 programmer
   id    = "ere-isp-avr";
-  desc  = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
+  desc  = "ERE ISP-AVR <https://www.ere.co.th/download/sch050713.pdf>";
   type  = par;
   reset = ~4;
   sck   = 3;
@@ -773,7 +773,7 @@ programmer
 ;
 
 # It is almost same as pony-stk200, except vcc on pin 5 to auto
-# disconnect port (download on http://electropol.free.fr)
+# disconnect port (download on https://electropol.free.fr)
 programmer
   id    = "frank-stk200";
   desc  = "Frank STK200";
@@ -787,7 +787,7 @@ programmer
 ;
 
 # The AT98ISP Cable is a simple parallel dongle for AT89 family.
-# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
+# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
 programmer
 id = "89isp";
 desc = "Atmel at89isp cable";
@@ -836,7 +836,7 @@ programmer
 
 programmer
   id    = "siprog";
-  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
+  desc  = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
   type  = serbb;
   reset = ~3;
   sck   = 7;
diff --git a/buildroot/share/vscode/avrdude_macOS.conf b/buildroot/share/vscode/avrdude_macOS.conf
index d933567452..2212ab46e7 100644
--- a/buildroot/share/vscode/avrdude_macOS.conf
+++ b/buildroot/share/vscode/avrdude_macOS.conf
@@ -147,7 +147,7 @@
 #     This flag was added to work around a problem with the
 #     at90s4433/2333's; see the at90s4433 errata at:
 #
-#         http://www.atmel.com/atmel/acrobat/doc1280.pdf
+#         https://www.atmel.com/atmel/acrobat/doc1280.pdf
 #
 # INSTRUCTION FORMATS
 #
@@ -184,7 +184,7 @@
 # section avr061.zip which accompanies the application note
 # AVR061 available from:
 #
-#      http://www.atmel.com/atmel/acrobat/doc2525.pdf
+#      https://www.atmel.com/atmel/acrobat/doc2525.pdf
 #
 
 #define ATTINY10    0x10  /* the _old_ one that never existed! */
@@ -416,13 +416,13 @@ programmer
 
 programmer
   id    = "usbasp";
-  desc  = "USBasp, http://www.fischl.de/usbasp/";
+  desc  = "USBasp, https://www.fischl.de/usbasp/";
   type  = usbasp;
 ;
 
 programmer
   id    = "usbtiny";
-  desc  = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
+  desc  = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
   type  = usbtiny;
 ;
 
@@ -630,7 +630,7 @@ programmer
 
 programmer
   id    = "siprog";
-  desc  = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
+  desc  = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
   type  = serbb;
   reset = ~3;
   sck   = 7;
diff --git a/platformio.ini b/platformio.ini
index 246abc11bd..edc027a6d3 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -769,7 +769,7 @@ upload_command    = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
 
 #
 # STM32F407VET6 with RAMPS-like shield
-# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
+# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
 # Shield - https://github.com/jmz52/Hardware
 #
 [env:STM32F407VE_black]
-- 
GitLab