diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index fbbb21d4168734e8e771b929fc26a2eb55beae05..7894c7da5d5b8150cc7c13dd400195e65fb50edb 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -482,6 +482,21 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+ #endif
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index fbbb21d4168734e8e771b929fc26a2eb55beae05..b472f061a1b9f768d7b99e54bcc24d11153e0821 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index aaef371f2c82cc3fb2527f7dd0d330289e992579..9e4838656482f0a6e1982a131d533ab84b54a06f 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index ff9a8b40d0072b606bbe3ce20bc6d6d869533d66..6657489819a4685dab70e18c16134232876216d5 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 2034846532501cf12bdf713a426c87768214fcf7..c2bffc8a5ac6f9c4ff13311fe254998e0b30b6f8 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index f6a9abbce98963b67d236e0bc64addaff03d1a12..436b95ca3ba4ba1accf908f4fd4effdf3bcd68e3 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -483,6 +483,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 007652f865b5f94bc4fa5dbab954cab54e45f2ea..02de527b33b1cf78cd3cff655f463501481728ef 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index f5adb371808816ddf2b95f68e06a11dc29f1c057..e382c4c3b61d191f44b58d777f7e2975be02b3d0 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 007652f865b5f94bc4fa5dbab954cab54e45f2ea..02de527b33b1cf78cd3cff655f463501481728ef 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 82e4ff63dd1e5977bf1c7da65afe0b2f278e42dc..d60c395b25883ffb4ee224f8e70af118e98e0ef8 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index fe5add0c673dd80954363dd953e4556d5e1e4bc5..d4b85d0092d9ca09cc61ad3c77c1de23c5b66bac 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 17719cee0169c51919d119e58e86bdf7ac01cbd1..119e86e0587596b2230a78235e057a65f0591e13 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index baa7a278fba5dede46dc35ad8bb583dfb788044d..726c398e445bc6de7691ef6b454b393d805db599 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 21519c30b4af201fc0f8fa82ed253506d57fc022..f17dcdea7bac5b569521f7643a5201383b746865 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index c3b0b911a8fa648a7545085cd056060e4d9be602..4a467b94bba4f92202718cbb2cb2604671781b42 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index c8f092df2e1e797189829011acacd02e14cb4f42..58dd452df6d39d7353a9141b9d678739799e6ee4 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index caa659038543c2c68fe4e49116f3a741f4143d94..743eb91b545d2e00a4d0cf92ad3212c91d9e6942 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -483,6 +483,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index 4ff47fd90a31b84a4b4067d755f0a52c840c058b..93b450c68fd335525a7aa8970f27d39a3f27b48b 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index b0756f79120386d23b17bb028d276bdb67f29a4b..3a4cf53296045a6b574569aae9728e6953f97a76 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index d6da256f989903d90b80db623f648409b4ede295..49a04bc0b8f91181515a297e0ad71a287ec939ef 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -471,6 +471,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 22c845e359ec9587fea4faa08bc74266e1d498cb..1ff50eb0d7f3b0458e049559420409183a8b6f2e 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index d9aef183d904a766fda8a69f97456cf8bdac1392..ed1b1ead599bf7a31acf653c231dcbf1c790847c 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 98959a683ff6859e9fcd3a6af910c10432bdc392..2dc6e19b9e75497fdead346e1339876ee12226d6 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -495,6 +495,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 3ab905163150e29172d0da3dc505432d9390b6cc..8c788c9ddda1f523fc1ea4abd06b748c11416738 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -483,6 +483,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 4850ad7a943bdf9241df89bc95c7223c5044b53c..217d29c44c98086e694a1a1718ee242f9168cd25 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -484,6 +484,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 8663f5e32b24cb9c2f455e42ae1c2d77615eb972..ef8778f44c525c8b775c6016e625236448b53610 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -484,6 +484,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 8663f5e32b24cb9c2f455e42ae1c2d77615eb972..ef8778f44c525c8b775c6016e625236448b53610 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -484,6 +484,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 8663f5e32b24cb9c2f455e42ae1c2d77615eb972..ef8778f44c525c8b775c6016e625236448b53610 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -484,6 +484,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 46c4999cca58890a29f6eeab37e4bcc995d40309..1cc9d1f4cb66e05e2d32ac1ef697b6b8aab86b14 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -489,6 +489,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 66dd6700f47a5d924a7c204de563e3434b33575a..7cbc9791cadd32ec42cad88da50eeaed70b3953a 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -484,6 +484,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 59b861ed4db41c38b57d9c6bc400f54a0f0e094e..5a2ffd3e4d12967ab9dd58fa6f78d601d7a02d09 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 3bc38c7459c5f7a44453631073add85c7b2dc1cb..8e5aa309ad3c0d59c34125f91d9a9ff2ecc49bb5 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index c1e303af393306553c55569bb1f36415eb0ef909..3edfa9a3efea2d9ac87055697aa9123ab03bfc15 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -482,6 +482,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index ad2f3b894fc090b007e8e585d60087a9282dbf5c..54f72fb07b61a7757c1ec8c04524dc2a2db9c9b7 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -483,6 +483,20 @@
// The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000
+//#define LED_CONTROL_MENU // Uncomment to enable the LED control menu option.
+#if ENABLED(LED_CONTROL_MENU)
+
+ #define LED_COLOR_PRESETS // Uncomment to enable the preset color menu option.
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_INTENSITY 255 // User defined intensity
+ #endif
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+#endif // LED_CONTROL_MENU
+
#if ENABLED(SDSUPPORT)
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp
index b412bdc70c3763b52bc321ed9189a0ab1c9b850e..456a6442c96cd5d35b60791babd94f63b3ea2ba4 100644
--- a/Marlin/src/feature/leds/leds.cpp
+++ b/Marlin/src/feature/leds/leds.cpp
@@ -30,6 +30,32 @@
#include "leds.h"
+#if ENABLED(LED_CONTROL_MENU)
+ #if ENABLED(LED_COLOR_PRESETS)
+uint8_t led_intensity_red = LED_USER_PRESET_RED,
+ led_intensity_green = LED_USER_PRESET_GREEN,
+ led_intensity_blue = LED_USER_PRESET_BLUE
+ #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+ , led_intensity_white = LED_USER_PRESET_WHITE
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ , led_intensity = NEOPIXEL_BRIGHTNESS
+ #endif
+ ;
+ #else
+ uint8_t led_intensity_red = 255,
+ led_intensity_green = 255,
+ led_intensity_blue = 255
+ #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+ , led_intensity_white = 0
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ , led_intensity = NEOPIXEL_BRIGHTNESS
+ #endif
+ ;
+ #endif
+#endif
+
void set_led_color(
const uint8_t r, const uint8_t g, const uint8_t b
#if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
@@ -42,20 +68,11 @@ void set_led_color(
) {
#if ENABLED(NEOPIXEL_LED)
-
- const uint32_t color = pixels.Color(r, g, b, w);
- static uint16_t nextLed = 0;
-
- pixels.setBrightness(p);
- if (!isSequence)
- set_neopixel_color(color);
- else {
- pixels.setPixelColor(nextLed, color);
- pixels.show();
- if (++nextLed >= pixels.numPixels()) nextLed = 0;
- return;
+ if ((w == 255) || ((r == 255) && (g == 255) && (b == 255))) {
+ neopixel_set_led_color(NEO_WHITE, p);
}
-
+ else
+ neopixel_set_led_color(r, g, b, w, p);
#endif
#if ENABLED(BLINKM)
@@ -81,6 +98,34 @@ void set_led_color(
#if ENABLED(PCA9632)
pca9632_set_led_color(r, g, b); // Update I2C LED driver
#endif
+
+ #if ENABLED(LED_CONTROL_MENU)
+ if ((r + g + b
+ #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+ + w
+ #endif
+ ) >= 3) {
+ led_intensity_red = r;
+ led_intensity_green = g;
+ led_intensity_blue = b;
+ #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+ led_intensity_white = w;
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ led_intensity = p;
+ #endif
+ }
+ #endif
+}
+
+void set_led_white(){
+ #if ENABLED(NEOPIXEL_LED)
+ neopixel_set_led_color(NEO_WHITE, pixels.getBrightness());
+ #elif (RGBW_LED)
+ set_led_color(0, 0, 0, 255);
+ #else
+ set_led_color(255, 255, 255);
+ #endif
}
#endif // HAS_COLOR_LEDS
diff --git a/Marlin/src/feature/leds/leds.h b/Marlin/src/feature/leds/leds.h
index 81c822666a9d40af0077111f5c31d525a6f4fac9..1691593445302a91e101f1e670d7cd29c06d9c39 100644
--- a/Marlin/src/feature/leds/leds.h
+++ b/Marlin/src/feature/leds/leds.h
@@ -65,4 +65,6 @@ void set_led_color(
#endif
);
+void set_led_white();
+
#endif // __LEDS_H__
diff --git a/Marlin/src/feature/leds/neopixel.cpp b/Marlin/src/feature/leds/neopixel.cpp
index ae06e9b0098f6b9ffa89d6e23ea577a88cc8c0e3..5e32f5277abe0068bdd496c1947afd5a64d72e21 100644
--- a/Marlin/src/feature/leds/neopixel.cpp
+++ b/Marlin/src/feature/leds/neopixel.cpp
@@ -53,7 +53,27 @@ void setup_neopixel() {
set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue
safe_delay(1000);
#endif
- set_neopixel_color(pixels.Color(NEO_WHITE)); // white
+
+ #if ENABLED(LED_USER_PRESET_STARTUP)
+ set_neopixel_color(pixels.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE));
+ #else
+ set_neopixel_color(pixels.Color(0, 0, 0, 0));
+ #endif
+}
+
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
+ const uint32_t color = pixels.Color(r, g, b, w);
+ pixels.setBrightness(p);
+ #if !ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+ set_neopixel_color(color);
+ return false;
+ #else
+ static uint16_t nextLed = 0;
+ pixels.setPixelColor(nextLed, color);
+ pixels.show();
+ if (++nextLed >= pixels.numPixels()) nextLed = 0;
+ return true;
+ #endif
}
#endif // NEOPIXEL_LED
diff --git a/Marlin/src/feature/leds/neopixel.h b/Marlin/src/feature/leds/neopixel.h
index 2b937f1b876b9946443173792d2f48f86042ddcb..28ea61d302eda5fa8fe71a5c1e9cfba2fe350324 100644
--- a/Marlin/src/feature/leds/neopixel.h
+++ b/Marlin/src/feature/leds/neopixel.h
@@ -36,13 +36,14 @@
#define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB
#if NEOPIXEL_IS_RGB
- #define NEO_WHITE 255, 255, 255
+ #define NEO_WHITE 255, 255, 255, 0
#else
#define NEO_WHITE 0, 0, 0, 255
#endif
void setup_neopixel();
void set_neopixel_color(const uint32_t color);
+bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
extern Adafruit_NeoPixel pixels;
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index 580d1cb379321c17cb4d1c09476d8321c71a2edf..a0ffe1e49f1eaf514539e72202154338beccd9a4 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -174,7 +174,6 @@
#ifndef MSG_USER_MENU
#define MSG_USER_MENU _UxGT("Custom Commands")
#endif
-
#ifndef MSG_UBL_DOING_G29
#define MSG_UBL_DOING_G29 _UxGT("Doing G29")
#endif
@@ -361,7 +360,60 @@
#ifndef MSG_UBL_STEP_BY_STEP_MENU
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL")
#endif
-
+#ifndef MSG_LED_CONTROL
+ #define MSG_LED_CONTROL _UxGT("LED Control")
+#endif
+#ifndef MSG_LEDS_OFF
+ #define MSG_LEDS_OFF _UxGT("Turn Off Lights")
+#endif
+#ifndef MSG_LED_ON
+ #define MSG_LED_ON _UxGT("Turn on ")
+#endif
+#ifndef MSG_RED
+ #define MSG_RED _UxGT("Red ")
+#endif
+#ifndef MSG_ORANGE
+ #define MSG_ORANGE _UxGT("Orange ")
+#endif
+#ifndef MSG_YELLOW
+ #define MSG_YELLOW _UxGT("Yellow ")
+#endif
+#ifndef MSG_GREEN
+ #define MSG_GREEN _UxGT("Green ")
+#endif
+#ifndef MSG_BLUE
+ #define MSG_BLUE _UxGT("Blue ")
+#endif
+#ifndef MSG_PURPLE
+ #define MSG_PURPLE _UxGT("Purple ")
+#endif
+#ifndef MSG_WHITE
+ #define MSG_WHITE _UxGT("White ")
+#endif
+#ifndef MSG_CUSTOM
+ #define MSG_CUSTOM _UxGT("Custom ")
+#endif
+#ifndef MSG_LED_PRESET
+ #define MSG_LED_PRESET _UxGT("Preset ")
+#endif
+#ifndef MSG_LED_DEFAULT
+ #define MSG_LED_DEFAULT _UxGT("Default ")
+#endif
+#ifndef MSG_LIGHTS
+ #define MSG_LIGHTS _UxGT("Lights ")
+#endif
+#ifndef MSG_LED_INTENSITY
+ #define MSG_LED_INTENSITY _UxGT("Intensity ")
+#endif
+#ifndef MSG_LED_CUSTOM
+ #define MSG_LED_CUSTOM _UxGT("Custom LED")
+#endif
+#ifndef MSG_LED_SAVE
+ #define MSG_LED_SAVE _UxGT("Save ")
+#endif
+#ifndef MSG_LED_LOAD
+ #define MSG_LED_LOAD _UxGT("Load ")
+#endif
#ifndef MSG_MOVING
#define MSG_MOVING _UxGT("Moving...")
#endif
@@ -839,7 +891,6 @@
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded")
#endif
#endif
-
#ifndef MSG_INFO_MIN_TEMP
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#endif
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 239b262290d87d9f1aac607c029cc0e0cd848168..06adb16d798e9663ba66d90ddb37b04e5856f0d5 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -55,6 +55,10 @@
#include "../feature/bedlevel/bedlevel.h"
#endif
+#if ENABLED(LED_CONTROL_MENU)
+ #include "../feature/leds/leds.h"
+#endif
+
// For i2c define BUZZ to use lcd_buzz
#if DISABLED(LCD_USE_I2C_BUZZER)
#include "../libs/buzzer.h"
@@ -185,6 +189,11 @@ uint16_t max_display_update_time = 0;
void lcd_info_menu();
#endif // LCD_INFO_MENU
+ #if ENABLED(LED_CONTROL_MENU)
+ void lcd_led_menu();
+ void lcd_led_custom_menu();
+ #endif
+
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void lcd_advanced_pause_toocold_menu();
void lcd_advanced_pause_option_menu();
@@ -1014,6 +1023,9 @@ void kill_screen(const char* lcd_msg) {
MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
#endif
+ #if ENABLED(LED_CONTROL_MENU)
+ MENU_ITEM(submenu, "LED Control", lcd_led_menu);
+ #endif
END_MENU();
}
@@ -3931,6 +3943,132 @@ void kill_screen(const char* lcd_msg) {
}
#endif // LCD_INFO_MENU
+ /**
+ *
+ * LED Menu
+ *
+ */
+
+ #if ENABLED(LED_CONTROL_MENU)
+
+ bool led_restore_color =
+ #if ENABLED(LED_USER_PRESET_STARTUP)
+ false;
+ #else
+ true;
+ #endif
+
+ extern uint8_t led_intensity_red,
+ led_intensity_green,
+ led_intensity_blue
+ #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+ , led_intensity_white
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ , led_intensity
+ #endif
+ ;
+
+ void update_leds() {
+ if (led_restore_color) {
+ #if ENABLED(LED_COLOR_PRESETS)
+ led_intensity_red = LED_USER_PRESET_RED;
+ led_intensity_green = LED_USER_PRESET_GREEN;
+ led_intensity_blue = LED_USER_PRESET_BLUE;
+ #if ENABLED(RGBW_LED)
+ led_intensity_white = LED_USER_PRESET_WHITE;
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ led_intensity = LED_USER_PRESET_INTENSITY;
+ #endif
+ #else
+ led_intensity_red = 255;
+ led_intensity_green = 255;
+ led_intensity_blue = 255;
+ #if ENABLED(RGBW_LED)
+ led_intensity_white = 0;
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ led_intensity = LED_USER_PRESET_INTENSITY;
+ #endif
+ #endif
+ led_restore_color = false;
+ }
+
+ set_led_color(led_intensity_red, led_intensity_green, led_intensity_blue
+ #if ENABLED(RGBW_LED)
+ , led_intensity_white
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ , 0, led_intensity
+ #endif
+ );
+ led_restore_color = false;
+ }
+
+ void led_restore_default() {
+ led_restore_color = true;
+ update_leds();
+ }
+
+ void set_leds_off() {
+ set_led_color(0, 0, 0
+ #if ENABLED(RGBW) || ENABLED(NEOPIXEL_LED)
+ , 0
+ #endif
+ );
+ }
+
+ void lcd_led_red() { set_led_color(255, 0, 0); }
+ void lcd_led_orange() { set_led_color(150, 60, 0); }
+ void lcd_led_yellow() { set_led_color(255, 255, 0); }
+ void lcd_led_green() { set_led_color(0, 255, 0); }
+ void lcd_led_blue() { set_led_color(0, 0, 255); }
+ void lcd_led_purple() { set_led_color(255, 0, 255); }
+
+ void lcd_led_presets_menu() {
+ START_MENU();
+ MENU_BACK(MSG_LED_CONTROL);
+ MENU_ITEM(function, MSG_LED_ON MSG_RED MSG_LIGHTS, lcd_led_red);
+ MENU_ITEM(function, MSG_LED_ON MSG_ORANGE MSG_LIGHTS, lcd_led_orange);
+ MENU_ITEM(function, MSG_LED_ON MSG_YELLOW MSG_LIGHTS,lcd_led_yellow);
+ MENU_ITEM(function, MSG_LED_ON MSG_GREEN MSG_LIGHTS, lcd_led_green);
+ MENU_ITEM(function, MSG_LED_ON MSG_BLUE MSG_LIGHTS, lcd_led_blue);
+ MENU_ITEM(function, MSG_LED_ON MSG_PURPLE MSG_LIGHTS, lcd_led_purple);
+ MENU_ITEM(function, MSG_LED_ON MSG_WHITE MSG_LIGHTS, set_led_white);
+ END_MENU();
+ }
+
+ void lcd_led_custom_menu() {
+ START_MENU();
+ MENU_BACK(MSG_LED_CONTROL);
+ MENU_ITEM_EDIT_CALLBACK(int8, MSG_RED MSG_LED_INTENSITY, &led_intensity_red, 0, 255, update_leds, true);
+ MENU_ITEM_EDIT_CALLBACK(int8, MSG_GREEN MSG_LED_INTENSITY, &led_intensity_green, 0, 255, update_leds, true);
+ MENU_ITEM_EDIT_CALLBACK(int8, MSG_BLUE MSG_LED_INTENSITY, &led_intensity_blue, 0, 255, update_leds, true);
+ #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+ MENU_ITEM_EDIT_CALLBACK(int8, MSG_WHITE MSG_LED_INTENSITY, &led_intensity_white, 0, 255, update_leds, true);
+ #endif
+ #if ENABLED(NEOPIXEL_LED)
+ MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_INTENSITY, &led_intensity, 0, 255, update_leds, true);
+ #endif
+ END_MENU();
+ }
+
+ void lcd_led_menu() {
+ START_MENU();
+ MENU_BACK(MSG_MAIN);
+ MENU_ITEM(function, MSG_LIGHTS MSG_OFF, set_leds_off); // works
+ MENU_ITEM(function, MSG_LIGHTS MSG_ON, update_leds); // works
+ MENU_ITEM(function, MSG_LED_LOAD MSG_LED_DEFAULT MSG_LIGHTS, led_restore_default); // works
+ #if ENABLED(LED_COLOR_PRESETS)
+ MENU_ITEM(submenu, MSG_LED_PRESET MSG_LIGHTS, lcd_led_presets_menu);
+ #endif
+ MENU_ITEM(submenu, MSG_CUSTOM MSG_LIGHTS, lcd_led_custom_menu);
+ END_MENU();
+ }
+
+ #endif // LED_CONTROL_MENU
+
/**
*
* Filament Change Feature Screens