diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 8e9459081f7694234af7dd927651adcc4703875a..9b2c4007aa673ec6ac71fc6d5d84c51065c7f5a4 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -405,10 +405,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h
index c0c3cc7b2e2399a36eda9269a1e0157d41b72f96..6a6eccc27d12eba52c465f4ee61543e8ea5b9aee 100644
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@@ -402,10 +402,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index fc61c62793a8554dec12b075a13a1e8ffcdaa6bd..2f2a653cb7ce2f67a63a4bec72b94505cda55416 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -415,10 +415,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index e351238268c7de507301d0e2fff69c46c6bdaf82..25cf538da1ac8dc307e5d2b6e0aecafdc30b383e 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -418,10 +418,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 1d67d1e70ff63fe7f534e404a78dcd0b8146902a..94752253faf400cb4cd52ce9fe1a6a4054200a45 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -438,10 +438,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 6756843b4437b1101ebd390130677ed8e45a415d..9c00bcf20f1107ce34ca5ec6a4616ceb55301834 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -423,10 +423,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 1e94dd9d36caaf94bd2ca04fdce811f31dec7804..288cb52fc4bd72234d8bd553f0d5b3407bc967cf 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -417,10 +417,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 7fe6a45c9971d09135240b7b402fbfee298055f0..c81f5b1d7d9ac5018e57527bbd43bd81affcecdd 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -431,10 +431,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index a1b3bb282945415b8bb2acfcf0c1bdf188890714..45c4ab70576b584d6f7eda393d4833375b741786 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -443,10 +443,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 502be68ceb5cce320b8fc2ade42f2092cdd2bb74..4cb81a65bc58df9f042e81a91ef4b81fd7413897 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -415,10 +415,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index fc11b8103ff0b4d5502383bcb752cd30eb0a521a..2b99d46be936c00fe615dbe8ce4e2f828cf38b8e 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -445,10 +445,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 339956ca354bfb96756a821c87f22103e745590f..fabc8e07d035ff458023d63c70fd1b4d6d62a3f6 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -451,10 +451,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 70241e7d1f122c6bd158f0883e0a4391d7e21800..0689d6384515df513426a2ea4f888357eb931084 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -426,10 +426,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.
 
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 2c9c97b5e37623cbe11b6c7d29e70b090b52ca0b..6e6855c97960dc66e97cea09603eb3618d1170a7 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -413,10 +413,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 
 #if ENABLED(MESH_BED_LEVELING)
   #define MESH_MIN_X 10
-    #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
+  #define MESH_MAX_X (X_MAX_POS - (MESH_MIN_X))
   #define MESH_MIN_Y 10
   #define MESH_MAX_Y (Y_MAX_POS - (MESH_MIN_Y))
-#define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_NUM_X_POINTS 3  // Don't use more than 7 points per axis, implementation limited.
   #define MESH_NUM_Y_POINTS 3
   #define MESH_HOME_SEARCH_Z 4  // Z after Home, bed somewhere below but above 0.0.