diff --git a/Marlin/language_an.h b/Marlin/language_an.h
index 5ba45afac850140331acac3ece9d9dafb11629a5..e26c7d868278f70f03994e9a2518a39b0167fab2 100644
--- a/Marlin/language_an.h
+++ b/Marlin/language_an.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Establir zero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
-#define MSG_PREHEAT_PLA0 "Precalentar PLA1"
-#define MSG_PREHEAT_PLA1 "Precalentar PLA2"
-#define MSG_PREHEAT_PLA2 "Precalentar PLA3"
-#define MSG_PREHEAT_PLA3 "Precalentar PLA4"
-#define MSG_PREHEAT_PLA0123 "Precalentar PLA a"
+#define MSG_PREHEAT_PLA_N "Precalentar PLA "
+#define MSG_PREHEAT_PLA_ALL "Precalentar PLA a"
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
-#define MSG_PREHEAT_ABS0 "Precalentar ABS1"
-#define MSG_PREHEAT_ABS1 "Precalentar ABS2"
-#define MSG_PREHEAT_ABS2 "Precalentar ABS3"
-#define MSG_PREHEAT_ABS3 "Precalentar ABS4"
-#define MSG_PREHEAT_ABS0123 "Precalentar ABS a"
+#define MSG_PREHEAT_ABS_N "Precalentar ABS "
+#define MSG_PREHEAT_ABS_ALL "Precalentar ABS a"
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
#define MSG_COOLDOWN "Enfriar"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Velocidat"
#define MSG_NOZZLE "Nozzle"
-#define MSG_NOZZLE1 "Nozzle2"
-#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Base"
#define MSG_FAN_SPEED "Ixoriador"
#define MSG_FLOW "Fluxo"
-#define MSG_FLOW0 "Fluxo 0"
-#define MSG_FLOW1 "Fluxo 1"
-#define MSG_FLOW2 "Fluxo 2"
#define MSG_CONTROL "Control"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
@@ -132,17 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Retraer"
-#define MSG_RECTRACT_WIDE "Retraer"
-#define MSG_TEMPERATURE_WIDE "Temperatura"
-#define MSG_TEMPERATURE_RTN "Temperatura"
-#define MSG_MAIN_WIDE "Menu Prencipal"
-#define MSG_MOTION_WIDE "Movimiento"
-#define MSG_PREPARE_ALT "Preparar"
-#define MSG_CONTROL_ARROW "Control \x7E"
-#define MSG_RETRACT_ARROW "Retraer \x7E"
-#define MSG_STEPPER_RELEASED "Desacoplada."
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h
index 12ad566ad7c405b9043d355f216eb8f8ca49c5d6..e7f837d5d3e3ea97de81cb73c7794cee97e83cb5 100644
--- a/Marlin/language_ca.h
+++ b/Marlin/language_ca.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Establir origen"
#define MSG_PREHEAT_PLA "Preescalfar PLA"
-#define MSG_PREHEAT_PLA0 "Preescalfar PLA 1"
-#define MSG_PREHEAT_PLA1 "Preescalfar PLA 2"
-#define MSG_PREHEAT_PLA2 "Preescalfar PLA 3"
-#define MSG_PREHEAT_PLA3 "Preescalfar PLA 4"
-#define MSG_PREHEAT_PLA0123 "Preesc. tot PLA"
+#define MSG_PREHEAT_PLA_N "Preescalfar PLA "
+#define MSG_PREHEAT_PLA_ALL "Preesc. tot PLA"
#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA"
#define MSG_PREHEAT_ABS "Preescalfar ABS"
-#define MSG_PREHEAT_ABS0 "Preescalfar ABS 1"
-#define MSG_PREHEAT_ABS1 "Preescalfar ABS 2"
-#define MSG_PREHEAT_ABS2 "Preescalfar ABS 3"
-#define MSG_PREHEAT_ABS3 "Preescalfar ABS 4"
-#define MSG_PREHEAT_ABS0123 "Preesc. tot ABS"
+#define MSG_PREHEAT_ABS_N "Preescalfar ABS "
+#define MSG_PREHEAT_ABS_ALL "Preesc. tot ABS"
#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS"
#define MSG_COOLDOWN "Refredar"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Moure Y"
#define MSG_MOVE_Z "Moure Z"
#define MSG_MOVE_E "Extrusor"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Moure 0.1mm"
#define MSG_MOVE_1MM "Moure 1mm"
#define MSG_MOVE_10MM "Moure 10mm"
#define MSG_SPEED "Velocitat"
#define MSG_NOZZLE "Nozzle"
-#define MSG_NOZZLE1 "Nozzle2"
-#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Llit"
#define MSG_FAN_SPEED "Vel. Ventilador"
#define MSG_FLOW "Fluxe"
-#define MSG_FLOW0 "Fluxe 0"
-#define MSG_FLOW1 "Fluxe 1"
-#define MSG_FLOW2 "Fluxe 2"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -140,8 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Retreure"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_de.h b/Marlin/language_de.h
index c3a1a95fc1c944bfdbbb9fb60906d3d3f542920c..8aa06024ce5729f7c74fa7664d4c8cfb4912a58a 100644
--- a/Marlin/language_de.h
+++ b/Marlin/language_de.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
-#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
-#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
-#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
-#define MSG_PREHEAT_PLA3 "Vorwärmen PLA 4"
-#define MSG_PREHEAT_PLA0123 "Vorw. PLA Alle"
+#define MSG_PREHEAT_PLA_N "Vorwärmen PLA "
+#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
-#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
-#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
-#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
-#define MSG_PREHEAT_ABS3 "Vorwärmen ABS 4"
-#define MSG_PREHEAT_ABS0123 "Vorw. ABS Alle"
+#define MSG_PREHEAT_ABS_N "Vorwärmen ABS "
+#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
#define MSG_COOLDOWN "Abkühlen"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Y bewegen"
#define MSG_MOVE_Z "Z bewegen"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "0.1mm bewegen"
#define MSG_MOVE_1MM "1mm bewegen"
#define MSG_MOVE_10MM "10mm bewegen"
#define MSG_SPEED "Geschw"
#define MSG_NOZZLE "Düse"
-#define MSG_NOZZLE1 "Düse2"
-#define MSG_NOZZLE2 "Düse3"
#define MSG_BED "Bett"
#define MSG_FAN_SPEED "Lüftergeschw."
#define MSG_FLOW "Fluss"
-#define MSG_FLOW0 "Fluss 0"
-#define MSG_FLOW1 "Fluss 1"
-#define MSG_FLOW2 "Fluss 2"
#define MSG_CONTROL "Einstellungen"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -140,9 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_STEPPER_RELEASED "Stepper frei"
-#define MSG_RECTRACT_WIDE "Rectract"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_en.h b/Marlin/language_en.h
index 6261b14b976f7484ff92141fc003af56cd565da0..55f784e8ac43243fd9ad2945788a89204f712840 100644
--- a/Marlin/language_en.h
+++ b/Marlin/language_en.h
@@ -18,21 +18,15 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_PREHEAT_PLA "Preheat PLA"
-#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
-#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
-#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
-#define MSG_PREHEAT_PLA3 "Preheat PLA 4"
-#define MSG_PREHEAT_PLA0123 "Preheat PLA All"
-#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
-#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
+#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
+#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
+#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
+#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf"
#define MSG_PREHEAT_ABS "Preheat ABS"
-#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
-#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
-#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
-#define MSG_PREHEAT_ABS3 "Preheat ABS 4"
-#define MSG_PREHEAT_ABS0123 "Preheat ABS All"
-#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
-#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
+#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
+#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
+#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
+#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf"
#define MSG_COOLDOWN "Cooldown"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
@@ -43,24 +37,14 @@
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
-#define MSG_MOVE_E3 "Extruder4"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Speed"
#define MSG_NOZZLE "Nozzle"
-#define MSG_NOZZLE1 "Nozzle2"
-#define MSG_NOZZLE2 "Nozzle3"
-#define MSG_NOZZLE3 "Nozzle4"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow"
-#define MSG_FLOW0 "Flow 0"
-#define MSG_FLOW1 "Flow 1"
-#define MSG_FLOW2 "Flow 2"
-#define MSG_FLOW3 "Flow 3"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -72,18 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
-#define MSG_PID_P3 "PID-P E4"
-#define MSG_PID_I3 "PID-I E4"
-#define MSG_PID_D3 "PID-D E4"
-#define MSG_PID_C3 "PID-C E4"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -148,8 +120,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Rectract"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_es.h b/Marlin/language_es.h
index 65132e8c6d85abcb9cfef8014434fc955e85abfb..2d7b785bdfa2a48af5d37057f4afc74c0f892b86 100644
--- a/Marlin/language_es.h
+++ b/Marlin/language_es.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Ajustar offsets"
#define MSG_SET_ORIGIN "Establecer cero"
#define MSG_PREHEAT_PLA "Precalentar PLA"
-#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
-#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
-#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
-#define MSG_PREHEAT_PLA3 "Precalentar PLA 4"
-#define MSG_PREHEAT_PLA0123 "Precal. PLA Todo"
+#define MSG_PREHEAT_PLA_N "Precalentar PLA "
+#define MSG_PREHEAT_PLA_ALL "Precal. PLA Todo"
#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS "Precalentar ABS"
-#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
-#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
-#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
-#define MSG_PREHEAT_ABS3 "Precalentar ABS 4"
-#define MSG_PREHEAT_ABS0123 "Precal. ABS Todo"
+#define MSG_PREHEAT_ABS_N "Precalentar ABS "
+#define MSG_PREHEAT_ABS_ALL "Precal. ABS Todo"
#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
#define MSG_COOLDOWN "Enfriar"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Mover Y"
#define MSG_MOVE_Z "Mover Z"
#define MSG_MOVE_E "Extrusor"
-#define MSG_MOVE_E1 "Extrusor2"
-#define MSG_MOVE_E2 "Extrusor3"
#define MSG_MOVE_01MM "Mover 0.1mm"
#define MSG_MOVE_1MM "Mover 1mm"
#define MSG_MOVE_10MM "Mover 10mm"
#define MSG_SPEED "Velocidad"
#define MSG_NOZZLE "Nozzle"
-#define MSG_NOZZLE1 "Nozzle2"
-#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Base"
#define MSG_FAN_SPEED "Ventilador"
#define MSG_FLOW "Flujo"
-#define MSG_FLOW0 "Flujo 0"
-#define MSG_FLOW1 "Flujo 1"
-#define MSG_FLOW2 "Flujo 2"
#define MSG_CONTROL "Control"
#define MSG_MIN "\002 Min"
#define MSG_MAX "\002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Acel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -140,17 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Retraer"
-#define MSG_RECTRACT_WIDE "Retraer"
-#define MSG_TEMPERATURE_WIDE "Temperatura"
-#define MSG_TEMPERATURE_RTN "Temperatura"
-#define MSG_MAIN_WIDE "Menu principal"
-#define MSG_MOTION_WIDE "Movimiento"
-#define MSG_PREPARE_ALT "Preparar"
-#define MSG_CONTROL_ARROW "Control \x7E"
-#define MSG_RETRACT_ARROW "Retraer \x7E"
-#define MSG_STEPPER_RELEASED "Desacoplada."
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h
index ddb78197bcd9bb5de0e076aa25e46f18e26341f0..0f615d5a37c6dcf70a3325d8972f3845669814e3 100644
--- a/Marlin/language_eu.h
+++ b/Marlin/language_eu.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Hasiera ipini"
#define MSG_PREHEAT_PLA "Aurreberotu PLA"
-#define MSG_PREHEAT_PLA0 "Aurreberotu PLA1"
-#define MSG_PREHEAT_PLA1 "Aurreberotu PLA2"
-#define MSG_PREHEAT_PLA2 "Aurreberotu PLA3"
-#define MSG_PREHEAT_PLA3 "Aurreberotu PLA4"
-#define MSG_PREHEAT_PLA0123 "Berotu PLA Guztia"
+#define MSG_PREHEAT_PLA_N "Aurreberotu PLA "
+#define MSG_PREHEAT_PLA_ALL "Berotu PLA Guztia"
#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea"
#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig"
#define MSG_PREHEAT_ABS "Aurreberotu ABS"
-#define MSG_PREHEAT_ABS0 "Aurreberotu ABS 1"
-#define MSG_PREHEAT_ABS1 "Aurreberotu ABS 2"
-#define MSG_PREHEAT_ABS2 "Aurreberotu ABS 3"
-#define MSG_PREHEAT_ABS3 "Aurreberotu ABS 4"
-#define MSG_PREHEAT_ABS0123 "Berotu ABS Guztia"
+#define MSG_PREHEAT_ABS_N "Aurreberotu ABS "
+#define MSG_PREHEAT_ABS_ALL "Berotu ABS Guztia"
#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea"
#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig"
#define MSG_COOLDOWN "Hoztu"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Mugitu Y"
#define MSG_MOVE_Z "Mugitu Z"
#define MSG_MOVE_E "Estrusorea"
-#define MSG_MOVE_E1 "Estrusorea2"
-#define MSG_MOVE_E2 "Estrusorea3"
#define MSG_MOVE_01MM "Mugitu 0.1mm"
#define MSG_MOVE_1MM "Mugitu 1mm"
#define MSG_MOVE_10MM "Mugitu 10mm"
#define MSG_SPEED "Abiadura"
#define MSG_NOZZLE "Pita"
-#define MSG_NOZZLE1 "Pita2"
-#define MSG_NOZZLE2 "Pita3"
#define MSG_BED "Ohea"
#define MSG_FAN_SPEED "Haizagailua"
#define MSG_FLOW "Fluxua"
-#define MSG_FLOW0 "Fluxua 0"
-#define MSG_FLOW1 "Fluxua 1"
-#define MSG_FLOW2 "Fluxua 2"
#define MSG_CONTROL "Kontrola"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Azelerazioa"
#define MSG_VXY_JERK "Vxy-astindua"
#define MSG_VZ_JERK "Vz-astindua"
@@ -140,8 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop deuseztat"
-#define MSG_RECTRACT "Atzera eragin"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h
index bf7f74789e980ec6ae7fdbdf3a16d99cb2069307..23466002562a42c3a47c109ae15135f5fef038a3 100644
--- a/Marlin/language_fi.h
+++ b/Marlin/language_fi.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_PLA "Esilammita PLA"
-#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
-#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
-#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
-#define MSG_PREHEAT_PLA3 "Esilammita PLA 4"
-#define MSG_PREHEAT_PLA0123 "Esila. PLA Kaikki"
+#define MSG_PREHEAT_PLA_N "Esilammita PLA "
+#define MSG_PREHEAT_PLA_ALL "Esila. PLA Kaikki"
#define MSG_PREHEAT_PLA_BEDONLY "Esila. PLA Alusta"
#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
#define MSG_PREHEAT_ABS "Esilammita ABS"
-#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
-#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
-#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
-#define MSG_PREHEAT_ABS3 "Esilammita ABS 4"
-#define MSG_PREHEAT_ABS0123 "Esila. ABS Kaikki"
+#define MSG_PREHEAT_ABS_N "Esilammita ABS "
+#define MSG_PREHEAT_ABS_ALL "Esila. ABS Kaikki"
#define MSG_PREHEAT_ABS_BEDONLY "Esila. ABS Alusta"
#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
#define MSG_COOLDOWN "Jaahdyta"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED "Nopeus"
#define MSG_NOZZLE "Suutin"
-#define MSG_NOZZLE1 "Suutin2"
-#define MSG_NOZZLE2 "Suutin3"
#define MSG_BED "Alusta"
#define MSG_FAN_SPEED "Tuul. nopeus"
#define MSG_FLOW "Virtaus"
-#define MSG_FLOW0 "Virtaus 0"
-#define MSG_FLOW1 "Virtaus 1"
-#define MSG_FLOW2 "Virtaus 2"
#define MSG_CONTROL "Kontrolli"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Kiihtyv"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -140,8 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Veda takaisin"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h
index ddd4a770b214c8797d66dd0c40a1947566bfe27b..8019f96a5b36f37fe03ba7d582567bf34fc34ee4 100644
--- a/Marlin/language_fr.h
+++ b/Marlin/language_fr.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Regler origine"
#define MSG_PREHEAT_PLA "Prechauffage PLA"
-#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
-#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
-#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
-#define MSG_PREHEAT_PLA3 "Prechauff. PLA 4"
-#define MSG_PREHEAT_PLA0123 "Prech. PLA Tout"
+#define MSG_PREHEAT_PLA_N "Prechauff. PLA "
+#define MSG_PREHEAT_PLA_ALL "Prech. PLA Tout"
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
#define MSG_PREHEAT_ABS "Prechauffage ABS"
-#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
-#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
-#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
-#define MSG_PREHEAT_ABS3 "Prechauff. ABS 4"
-#define MSG_PREHEAT_ABS0123 "Prech. ABS Tout"
+#define MSG_PREHEAT_ABS_N "Prechauff. ABS "
+#define MSG_PREHEAT_ABS_ALL "Prech. ABS Tout"
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
#define MSG_COOLDOWN "Refroidir"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
#define MSG_SPEED " Vitesse"
#define MSG_NOZZLE "Buse"
-#define MSG_NOZZLE1 "Buse2"
-#define MSG_NOZZLE2 "Buse3"
#define MSG_BED "Plateau"
#define MSG_FAN_SPEED "Vite. ventilateur"
#define MSG_FLOW "Flux"
-#define MSG_FLOW0 "Flux 0"
-#define MSG_FLOW1 "Flux 1"
-#define MSG_FLOW2 "Flux 2"
#define MSG_CONTROL "Controler"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -140,9 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Butee abandon"
-#define MSG_RECTRACT "Rectract"
-#define MSG_STEPPER_RELEASED "RELACHE."
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_it.h b/Marlin/language_it.h
index 98e6812f0fbb56e0da50f5ed886e66053ab97ae9..b0b644231c9ab9acb1b42a2c631c54ec17853dff 100644
--- a/Marlin/language_it.h
+++ b/Marlin/language_it.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Setta offset home"
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA"
-#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
-#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
-#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
-#define MSG_PREHEAT_PLA3 "Preriscalda PLA 4"
-#define MSG_PREHEAT_PLA0123 "Prer. PLA Tutto"
+#define MSG_PREHEAT_PLA_N "Preriscalda PLA "
+#define MSG_PREHEAT_PLA_ALL "Prer. PLA Tutto"
#define MSG_PREHEAT_PLA_BEDONLY "Prer. PLA Piatto"
#define MSG_PREHEAT_PLA_SETTINGS "Config. prer. PLA"
#define MSG_PREHEAT_ABS "Preriscalda ABS"
-#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
-#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
-#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
-#define MSG_PREHEAT_ABS3 "Preriscalda ABS 4"
-#define MSG_PREHEAT_ABS0123 "Prer. ABS Tutto"
+#define MSG_PREHEAT_ABS_N "Preriscalda ABS "
+#define MSG_PREHEAT_ABS_ALL "Prer. ABS Tutto"
#define MSG_PREHEAT_ABS_BEDONLY "Prer. ABS Piatto"
#define MSG_PREHEAT_ABS_SETTINGS "Config. prer. ABS"
#define MSG_COOLDOWN "Raffredda"
@@ -43,28 +37,18 @@
#define MSG_MOVE_Y "Muovi Y"
#define MSG_MOVE_Z "Muovi Z"
#define MSG_MOVE_E "Estrusore"
-#define MSG_MOVE_E1 "Estrusore 2"
-#define MSG_MOVE_E2 "Estrusore 3"
-#define MSG_MOVE_E3 "Estrusore 4"
#define MSG_MOVE_01MM "Muovi di 0.1mm"
#define MSG_MOVE_1MM "Muovi di 1mm"
#define MSG_MOVE_10MM "Muovi di 10mm"
#define MSG_SPEED "Velcità "
#define MSG_NOZZLE "Ugello"
-#define MSG_NOZZLE1 "Ugello2"
-#define MSG_NOZZLE2 "Ugello3"
-#define MSG_NOZZLE3 "Ugello4"
#define MSG_BED "Piatto"
#define MSG_FAN_SPEED "Ventola"
#define MSG_FLOW "Flusso"
-#define MSG_FLOW0 "Flusso 0"
-#define MSG_FLOW1 "Flusso 1"
-#define MSG_FLOW2 "Flusso 2"
-#define MSG_FLOW3 "Flusso 3"
#define MSG_CONTROL "Controllo"
-#define MSG_MIN " \002 Min:"
-#define MSG_MAX " \002 Max:"
-#define MSG_FACTOR " \002 Fact:"
+#define MSG_MIN " \002 Min"
+#define MSG_MAX " \002 Max"
+#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "ON "
#define MSG_OFF "OFF"
@@ -72,18 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
-#define MSG_PID_P3 "PID-P E4"
-#define MSG_PID_I3 "PID-I E4"
-#define MSG_PID_D3 "PID-D E4"
-#define MSG_PID_C3 "PID-C E4"
#define MSG_ACC "Accel."
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -148,8 +120,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Finecorsa abort"
-#define MSG_RECTRACT "Ritrai"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Calibraz. Delta"
#define MSG_DELTA_CALIBRATE_X "Calibra X"
diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h
index 105f3fc3266ba59a7acaa760d7e22208dd7d294d..7de2f9a8e252187c7410aeec7d0746492c4cd0de 100644
--- a/Marlin/language_nl.h
+++ b/Marlin/language_nl.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Nulpunt instellen"
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
-#define MSG_PREHEAT_PLA0 "PLA voorverw. 1"
-#define MSG_PREHEAT_PLA1 "PLA voorverw. 2"
-#define MSG_PREHEAT_PLA2 "PLA voorverw. 3"
-#define MSG_PREHEAT_PLA3 "PLA voorverw. 4"
-#define MSG_PREHEAT_PLA0123 "PLA voorverw. aan"
+#define MSG_PREHEAT_PLA_N "PLA voorverw. "
+#define MSG_PREHEAT_PLA_ALL "PLA voorverw. aan"
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
-#define MSG_PREHEAT_ABS0 "ABS voorverw. 1"
-#define MSG_PREHEAT_ABS1 "ABS voorverw. 2"
-#define MSG_PREHEAT_ABS2 "ABS voorverw. 3"
-#define MSG_PREHEAT_ABS3 "ABS voorverw. 4"
-#define MSG_PREHEAT_ABS0123 "ABS voorverw. aan"
+#define MSG_PREHEAT_ABS_N "ABS voorverw. "
+#define MSG_PREHEAT_ABS_ALL "ABS voorverw. aan"
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
#define MSG_COOLDOWN "Afkoelen"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Verplaats Y"
#define MSG_MOVE_Z "Verplaats Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Verplaats 0.1mm"
#define MSG_MOVE_1MM "Verplaats 1mm"
#define MSG_MOVE_10MM "Verplaats 10mm"
#define MSG_SPEED "Snelheid"
#define MSG_NOZZLE "Nozzle"
-#define MSG_NOZZLE1 "Nozzle2"
-#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan snelheid"
#define MSG_FLOW "Flow"
-#define MSG_FLOW0 "Flow 0"
-#define MSG_FLOW1 "Flow 1"
-#define MSG_FLOW2 "Flow 2"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Versn"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@@ -140,8 +119,6 @@
#define MSG_BABYSTEP_Z "Babystap Z"
#define MSG_ENDSTOP_ABORT "Endstop afbr."
-#define MSG_RECTRACT "Terugtrekken"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h
index 7c3c8ee45808dc88efa4e9a10cca82c8370d5338..93ccf4046ba6422832acd3c329f43bd4a497ea80 100644
--- a/Marlin/language_pl.h
+++ b/Marlin/language_pl.h
@@ -18,19 +18,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
-#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
-#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
-#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
-#define MSG_PREHEAT_PLA3 "Rozgrzej PLA 4"
-#define MSG_PREHEAT_PLA0123 "Roz. PLA Wszystko"
+#define MSG_PREHEAT_PLA_N "Rozgrzej PLA "
+#define MSG_PREHEAT_PLA_ALL "Roz. PLA Wszystko"
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
-#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
-#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
-#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
-#define MSG_PREHEAT_ABS3 "Rozgrzej ABS 4"
-#define MSG_PREHEAT_ABS0123 "Roz. ABS Wszystko"
+#define MSG_PREHEAT_ABS_N "Rozgrzej ABS "
+#define MSG_PREHEAT_ABS_ALL "Roz. ABS Wszystko"
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
#define MSG_COOLDOWN "Chlodzenie"
@@ -43,21 +37,14 @@
#define MSG_MOVE_Y "Przesun w Y"
#define MSG_MOVE_Z "Przesun w Z"
#define MSG_MOVE_E "Ekstruzja (os E)"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
#define MSG_SPEED "Predkosc"
#define MSG_NOZZLE "Dysza"
-#define MSG_NOZZLE1 "Dysza 2"
-#define MSG_NOZZLE2 "Dysza 3"
#define MSG_BED "Loze"
#define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_FLOW "Przeplyw"
-#define MSG_FLOW0 "Przeplyw 0"
-#define MSG_FLOW1 "Przeplyw 1"
-#define MSG_FLOW2 "Przeplyw 2"
#define MSG_CONTROL "Ustawienia"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@@ -69,14 +56,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
-#define MSG_PID_P1 "PID-P E2"
-#define MSG_PID_I1 "PID-I E2"
-#define MSG_PID_D1 "PID-D E2"
-#define MSG_PID_C1 "PID-C E2"
-#define MSG_PID_P2 "PID-P E3"
-#define MSG_PID_I2 "PID-I E3"
-#define MSG_PID_D2 "PID-D E3"
-#define MSG_PID_C2 "PID-C E3"
#define MSG_ACC "Przyspieszenie"
#define MSG_VXY_JERK "Zryw Vxy"
#define MSG_VZ_JERK "Zryw Vz"
@@ -124,7 +103,7 @@
#define MSG_CONTROL_RETRACT "Wycofaj mm"
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
#define MSG_CONTROL_RETRACTF "Wycofaj V"
-#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
+#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm"
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
@@ -140,9 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
-#define MSG_RECTRACT "Wycofanie"
-#define MSG_STEPPER_RELEASED "Zwolniony."
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h
index 624b404ea3d2744acf94ca25b2abc912d526ea24..39a323549d301eeec7c67d00e671c21f9488b2fb 100644
--- a/Marlin/language_pt.h
+++ b/Marlin/language_pt.h
@@ -18,20 +18,14 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Estabelecer orig."
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
-#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
-#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
-#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
-#define MSG_PREHEAT_PLA3 " pre-aquecer PLA 4"
-#define MSG_PREHEAT_PLA0123 " pre-aq. PLA Tudo"
-#define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base"
+#define MSG_PREHEAT_PLA_N "Pre-aquecer PLA "
+#define MSG_PREHEAT_PLA_ALL "Pre-aq. PLA Tudo"
+#define MSG_PREHEAT_PLA_BEDONLY "Pre-aq. PLA \002Base"
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
-#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
-#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
-#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
-#define MSG_PREHEAT_ABS3 " pre-aquecer ABS 4"
-#define MSG_PREHEAT_ABS0123 " pre-aq. ABS Tudo"
-#define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base"
+#define MSG_PREHEAT_ABS_N "Pre-aquecer ABS "
+#define MSG_PREHEAT_ABS_ALL "Pre-aq. ABS Tudo"
+#define MSG_PREHEAT_ABS_BEDONLY "Pre-aq. ABS \002Base"
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
#define MSG_COOLDOWN "Esfriar"
#define MSG_SWITCH_PS_ON "Switch Power On"
@@ -43,57 +37,42 @@
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
-#define MSG_SPEED "Velocidade:"
-#define MSG_NOZZLE "\002Nozzle:"
-#define MSG_NOZZLE1 "\002Nozzle2:"
-#define MSG_NOZZLE2 "\002Nozzle3:"
-#define MSG_BED "\002Base:"
+#define MSG_SPEED "Velocidade"
+#define MSG_NOZZLE "\002Nozzle"
+#define MSG_BED "\002Base"
#define MSG_FAN_SPEED "Velocidade vento."
-#define MSG_FLOW "Fluxo:"
-#define MSG_FLOW0 "Fluxo0:"
-#define MSG_FLOW1 "Fluxo1:"
-#define MSG_FLOW2 "Fluxo2:"
+#define MSG_FLOW "Fluxo"
#define MSG_CONTROL "Controle \003"
-#define MSG_MIN "\002 Min:"
-#define MSG_MAX "\002 Max:"
-#define MSG_FACTOR "\002 Fact:"
-#define MSG_AUTOTEMP "Autotemp:"
+#define MSG_MIN "\002 Min"
+#define MSG_MAX "\002 Max"
+#define MSG_FACTOR "\002 Fact"
+#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
-#define MSG_PID_P "PID-P: "
-#define MSG_PID_I "PID-I: "
-#define MSG_PID_D "PID-D: "
-#define MSG_PID_C "PID-C: "
-#define MSG_PID_P1 "PID-P E2: "
-#define MSG_PID_I1 "PID-I E2: "
-#define MSG_PID_D1 "PID-D E2: "
-#define MSG_PID_C1 "PID-C E2: "
-#define MSG_PID_P2 "PID-P E3: "
-#define MSG_PID_I2 "PID-I E3: "
-#define MSG_PID_D2 "PID-D E3: "
-#define MSG_PID_C2 "PID-C E3: "
-#define MSG_ACC "Acc:"
-#define MSG_VXY_JERK "Vxy-jerk: "
+#define MSG_PID_P "PID-P"
+#define MSG_PID_I "PID-I"
+#define MSG_PID_D "PID-D"
+#define MSG_PID_C "PID-C"
+#define MSG_ACC "Acc"
+#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX " Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN "Vmin:"
-#define MSG_VTRAV_MIN "VTrav min:"
+#define MSG_X "x"
+#define MSG_Y "y"
+#define MSG_Z "z"
+#define MSG_E "e"
+#define MSG_VMIN "Vmin"
+#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
-#define MSG_A_RETRACT "A-retract:"
-#define MSG_XSTEPS "Xpasso/mm:"
-#define MSG_YSTEPS "Ypasso/mm:"
-#define MSG_ZSTEPS "Zpasso/mm:"
-#define MSG_ESTEPS "Epasso/mm:"
+#define MSG_A_RETRACT "A-retract"
+#define MSG_XSTEPS "Xpasso/mm"
+#define MSG_YSTEPS "Ypasso/mm"
+#define MSG_ZSTEPS "Zpasso/mm"
+#define MSG_ESTEPS "Epasso/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filament"
@@ -121,14 +100,14 @@
#define MSG_NO_MOVE "Sem movimento"
#define MSG_KILLED "PARADA DE EMERG."
#define MSG_STOPPED "PARADA. "
-#define MSG_CONTROL_RETRACT " Retrair mm:"
-#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm:"
-#define MSG_CONTROL_RETRACTF " Retrair V:"
-#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
-#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V:"
-#define MSG_AUTORETRACT " AutoRetr.:"
+#define MSG_CONTROL_RETRACT " Retrair mm"
+#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm"
+#define MSG_CONTROL_RETRACTF " Retrair V"
+#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm"
+#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm"
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm"
+#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V"
+#define MSG_AUTORETRACT " AutoRetr."
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
@@ -140,13 +119,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Retrair"
-#define MSG_MAIN_WIDE "Menu Principal \003"
-#define MSG_PREPARE_ALT "Preparar \003"
-#define MSG_CONTROL_ARROW "Controle \x7E"
-#define MSG_RETRACT_ARROW "Retrair \x7E"
-#define MSG_STEPPER_RELEASED "Lancado."
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h
index 0e98221739f8c542f05811e498a8f7b187fe8222..010380b7bc01f5cc4bd0011a814d7318f919c1aa 100644
--- a/Marlin/language_ru.h
+++ b/Marlin/language_ru.h
@@ -20,19 +20,13 @@
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Запомнить ноль"
#define MSG_PREHEAT_PLA "Преднагрев PLA"
-#define MSG_PREHEAT_PLA0 "Преднагрев PLA1"
-#define MSG_PREHEAT_PLA1 "Преднагрев PLA2"
-#define MSG_PREHEAT_PLA2 "Преднагрев PLA3"
-#define MSG_PREHEAT_PLA3 "Преднагрев PLA4"
-#define MSG_PREHEAT_PLA0123 "Преднаг. PLA вÑе"
+#define MSG_PREHEAT_PLA_N "Преднагрев PLA"
+#define MSG_PREHEAT_PLA_ALL "Преднаг. PLA вÑе"
#define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Кровать"
#define MSG_PREHEAT_PLA_SETTINGS "ÐаÑтройки PLA"
#define MSG_PREHEAT_ABS "Преднагрев ABS"
-#define MSG_PREHEAT_ABS0 "Преднагрев ABS1"
-#define MSG_PREHEAT_ABS1 "Преднагрев ABS2"
-#define MSG_PREHEAT_ABS2 "Преднагрев ABS3"
-#define MSG_PREHEAT_ABS3 "Преднагрев ABS4"
-#define MSG_PREHEAT_ABS0123 "Преднаг. ABS вÑе "
+#define MSG_PREHEAT_ABS_N "Преднагрев ABS"
+#define MSG_PREHEAT_ABS_ALL "Преднаг. ABS вÑе "
#define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Кровать"
#define MSG_PREHEAT_ABS_SETTINGS "ÐаÑтройки ABS"
#define MSG_COOLDOWN "Охлаждение"
@@ -45,57 +39,42 @@
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
-#define MSG_MOVE_E1 "Extruder2"
-#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm"
-#define MSG_SPEED "СкороÑÑ‚ÑŒ:"
-#define MSG_NOZZLE "\002 Фильера:"
-#define MSG_NOZZLE1 "\002 Фильера2:"
-#define MSG_NOZZLE2 "\002 Фильера3:"
-#define MSG_BED "\002 Кровать:"
-#define MSG_FAN_SPEED "Куллер:"
-#define MSG_FLOW "Поток:"
-#define MSG_FLOW0 " Поток0:"
-#define MSG_FLOW1 " Поток1:"
-#define MSG_FLOW2 " Поток2:"
+#define MSG_SPEED "СкороÑÑ‚ÑŒ"
+#define MSG_NOZZLE "\002 Фильера"
+#define MSG_BED "\002 Кровать"
+#define MSG_FAN_SPEED "Куллер"
+#define MSG_FLOW "Поток"
#define MSG_CONTROL "ÐаÑтройки \003"
-#define MSG_MIN "\002 Минимум:"
-#define MSG_MAX "\002 МакÑимум:"
-#define MSG_FACTOR "\002 Фактор:"
-#define MSG_AUTOTEMP "Autotemp:"
+#define MSG_MIN "\002 Минимум"
+#define MSG_MAX "\002 МакÑимум"
+#define MSG_FACTOR "\002 Фактор"
+#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Вкл. "
#define MSG_OFF "Выкл. "
-#define MSG_PID_P "PID-P: "
-#define MSG_PID_I "PID-I: "
-#define MSG_PID_D "PID-D: "
-#define MSG_PID_C "PID-C: "
-#define MSG_PID_P1 "PID-P E2: "
-#define MSG_PID_I1 "PID-I E2: "
-#define MSG_PID_D1 "PID-D E2: "
-#define MSG_PID_C1 "PID-C E2: "
-#define MSG_PID_P2 "PID-P E3: "
-#define MSG_PID_I2 "PID-I E3: "
-#define MSG_PID_D2 "PID-D E3: "
-#define MSG_PID_C2 "PID-C E3: "
-#define MSG_ACC "Acc:"
-#define MSG_VXY_JERK "Vxy-jerk: "
+#define MSG_PID_P "PID-P"
+#define MSG_PID_I "PID-I"
+#define MSG_PID_D "PID-D"
+#define MSG_PID_C "PID-C"
+#define MSG_ACC "Acc"
+#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
-#define MSG_X "x:"
-#define MSG_Y "y:"
-#define MSG_Z "z:"
-#define MSG_E "e:"
-#define MSG_VMIN "Vmin:"
-#define MSG_VTRAV_MIN "VTrav min:"
+#define MSG_X "x"
+#define MSG_Y "y"
+#define MSG_Z "z"
+#define MSG_E "e"
+#define MSG_VMIN "Vmin"
+#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
-#define MSG_A_RETRACT "A-retract:"
-#define MSG_XSTEPS "X шаг/mm:"
-#define MSG_YSTEPS "Y шаг/mm:"
-#define MSG_ZSTEPS "Z шаг/mm:"
-#define MSG_ESTEPS "E шаг/mm:"
+#define MSG_A_RETRACT "A-retract"
+#define MSG_XSTEPS "X шаг/mm"
+#define MSG_YSTEPS "Y шаг/mm"
+#define MSG_ZSTEPS "Z шаг/mm"
+#define MSG_ESTEPS "E шаг/mm"
#define MSG_TEMPERATURE "Температура \x7E"
#define MSG_MOTION "СкороÑти \x7E"
#define MSG_VOLUMETRIC "Filament"
@@ -123,14 +102,14 @@
#define MSG_NO_MOVE "Ðет движениÑ."
#define MSG_KILLED "УБИТО."
#define MSG_STOPPED "ОСТÐÐОВЛЕÐО."
-#define MSG_CONTROL_RETRACT "Откат mm:"
-#define MSG_CONTROL_RETRACT_SWAP "Ñвоп Откат mm:"
-#define MSG_CONTROL_RETRACTF "Откат V:"
-#define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm:"
-#define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm:"
-#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ñвоп Возврат +mm:"
-#define MSG_CONTROL_RETRACT_RECOVERF "Возврат V:"
-#define MSG_AUTORETRACT "ÐвтоОткат:"
+#define MSG_CONTROL_RETRACT "Откат mm"
+#define MSG_CONTROL_RETRACT_SWAP "Ñвоп Откат mm"
+#define MSG_CONTROL_RETRACTF "Откат V"
+#define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm"
+#define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm"
+#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ñвоп Возврат +mm"
+#define MSG_CONTROL_RETRACT_RECOVERF "Возврат V"
+#define MSG_AUTORETRACT "ÐвтоОткат"
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
@@ -142,8 +121,6 @@
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
-#define MSG_RECTRACT "Откат подачи \x7E"
-
#ifdef DELTA_CALIBRATION_MENU
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index a8c7f8ca47e9e8e342807f30252d774846857509..5e78ed560dd70d25771be16dc53e38d09849ae3e 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -426,13 +426,13 @@ static void lcd_tune_menu()
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_1 != 0
- MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
+ MENU_ITEM_EDIT(int3, MSG_NOZZLE " 2", &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_2 != 0
- MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
+ MENU_ITEM_EDIT(int3, MSG_NOZZLE " 3", &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_3 != 0
- MENU_ITEM_EDIT(int3, MSG_NOZZLE3, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
+ MENU_ITEM_EDIT(int3, MSG_NOZZLE " 4", &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
#endif
@@ -441,15 +441,15 @@ static void lcd_tune_menu()
#endif
MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
MENU_ITEM_EDIT(int3, MSG_FLOW, &extrudemultiply, 10, 999);
- MENU_ITEM_EDIT(int3, MSG_FLOW0, &extruder_multiply[0], 10, 999);
+ MENU_ITEM_EDIT(int3, MSG_FLOW " 0", &extruder_multiply[0], 10, 999);
#if TEMP_SENSOR_1 != 0
- MENU_ITEM_EDIT(int3, MSG_FLOW1, &extruder_multiply[1], 10, 999);
+ MENU_ITEM_EDIT(int3, MSG_FLOW " 1", &extruder_multiply[1], 10, 999);
#endif
#if TEMP_SENSOR_2 != 0
- MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999);
+ MENU_ITEM_EDIT(int3, MSG_FLOW " 2", &extruder_multiply[2], 10, 999);
#endif
#if TEMP_SENSOR_3 != 0
- MENU_ITEM_EDIT(int3, MSG_FLOW3, &extruder_multiply[3], 10, 999);
+ MENU_ITEM_EDIT(int3, MSG_FLOW " 3", &extruder_multiply[3], 10, 999);
#endif
@@ -591,18 +591,18 @@ static void lcd_preheat_pla_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
- MENU_ITEM(function, MSG_PREHEAT_PLA0, lcd_preheat_pla0);
+ MENU_ITEM(function, MSG_PREHEAT_PLA_N "1", lcd_preheat_pla0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_PLA1, lcd_preheat_pla1);
+ MENU_ITEM(function, MSG_PREHEAT_PLA_N "2", lcd_preheat_pla1);
#endif //2 extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
+ MENU_ITEM(function, MSG_PREHEAT_PLA_N "3", lcd_preheat_pla2);
#endif //3 extruder preheat
#if TEMP_SENSOR_3 != 0 //4 extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_PLA3, lcd_preheat_pla3);
+ MENU_ITEM(function, MSG_PREHEAT_PLA_N "4", lcd_preheat_pla3);
#endif //4 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //all extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_PLA0123, lcd_preheat_pla0123);
+ MENU_ITEM(function, MSG_PREHEAT_PLA_ALL, lcd_preheat_pla0123);
#endif //all extruder preheat
#if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
@@ -614,18 +614,18 @@ static void lcd_preheat_abs_menu()
{
START_MENU();
MENU_ITEM(back, MSG_PREPARE, lcd_prepare_menu);
- MENU_ITEM(function, MSG_PREHEAT_ABS0, lcd_preheat_abs0);
+ MENU_ITEM(function, MSG_PREHEAT_ABS_N "1", lcd_preheat_abs0);
#if TEMP_SENSOR_1 != 0 //2 extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_ABS1, lcd_preheat_abs1);
+ MENU_ITEM(function, MSG_PREHEAT_ABS_N "2", lcd_preheat_abs1);
#endif //2 extruder preheat
#if TEMP_SENSOR_2 != 0 //3 extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
+ MENU_ITEM(function, MSG_PREHEAT_ABS_N "3", lcd_preheat_abs2);
#endif //3 extruder preheat
#if TEMP_SENSOR_3 != 0 //4 extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_ABS3, lcd_preheat_abs3);
+ MENU_ITEM(function, MSG_PREHEAT_ABS_N "4", lcd_preheat_abs3);
#endif //4 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //all extruder preheat
- MENU_ITEM(function, MSG_PREHEAT_ABS0123, lcd_preheat_abs0123);
+ MENU_ITEM(function, MSG_PREHEAT_ABS_ALL, lcd_preheat_abs0123);
#endif //all extruder preheat
#if TEMP_SENSOR_BED != 0
@@ -848,12 +848,12 @@ static void lcd_control_temperature_menu()
pid_current_extruder = 0;
raw_Ki = unscalePID_i(PID_PARAM(Ki,1));
raw_Kd = unscalePID_d(PID_PARAM(Kd,1));
- MENU_ITEM_EDIT(float52, MSG_PID_P1, &PID_PARAM(Kp,1), 1, 9990);
+ MENU_ITEM_EDIT(float52, MSG_PID_P " E2", &PID_PARAM(Kp,1), 1, 9990);
// i is typically a small value so allows values below 1
- MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I1, &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
- MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D1, &raw_Kd, 1, 9990, copy_and_scalePID_d);
+ MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E2", &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
+ MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E2", &raw_Kd, 1, 9990, copy_and_scalePID_d);
#ifdef PID_ADD_EXTRUSION_RATE
- MENU_ITEM_EDIT(float3, MSG_PID_C1, &PID_PARAM(Kc,1), 1, 9990);
+ MENU_ITEM_EDIT(float3, MSG_PID_C " E2", &PID_PARAM(Kc,1), 1, 9990);
#endif//PID_ADD_EXTRUSION_RATE
#endif//EXTRUDERS > 1
#if EXTRUDERS > 2
@@ -861,12 +861,12 @@ static void lcd_control_temperature_menu()
pid_current_extruder = 0;
raw_Ki = unscalePID_i(PID_PARAM(Ki,2));
raw_Kd = unscalePID_d(PID_PARAM(Kd,2));
- MENU_ITEM_EDIT(float52, MSG_PID_P2, &PID_PARAM(Kp,2), 1, 9990);
+ MENU_ITEM_EDIT(float52, MSG_PID_P " E3", &PID_PARAM(Kp,2), 1, 9990);
// i is typically a small value so allows values below 1
- MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I2, &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
- MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D2, &raw_Kd, 1, 9990, copy_and_scalePID_d);
+ MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I " E3", &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
+ MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D " E3", &raw_Kd, 1, 9990, copy_and_scalePID_d);
#ifdef PID_ADD_EXTRUSION_RATE
- MENU_ITEM_EDIT(float3, MSG_PID_C2, &PID_PARAM(Kc,2), 1, 9990);
+ MENU_ITEM_EDIT(float3, MSG_PID_C " E3", &PID_PARAM(Kc,2), 1, 9990);
#endif//PID_ADD_EXTRUSION_RATE
#endif//EXTRUDERS > 2
#endif // PID_PARAMS_PER_EXTRUDER