diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index ffa91659e5dce0d7af6e361fd0e7978580194504..01eccfeb3391c6ef5e9fbff66075b1122b4940c7 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -92,6 +92,7 @@ #define BOARD_RAMBO 301 // Rambo #define BOARD_MINIRAMBO 302 // Mini-Rambo #define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a +#define BOARD_EINSY_RAMBO 304 // Einsy Rambo #define BOARD_ELEFU_3 21 // Elefu Ra Board (v3) #define BOARD_LEAPFROG 999 // Leapfrog #define BOARD_MEGACONTROLLER 310 // Mega controller diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 8f5d6853a30124e6c2b1821679c5aec847847f7e..b254a147dec82ec6a723d7db64b108cdb7d7d1a7 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -159,6 +159,8 @@ #include "pins_RAMBO.h" // ATmega2560 #elif MB(MINIRAMBO) || MB(MINIRAMBO_10A) #include "pins_MINIRAMBO.h" // ATmega2560 +#elif MB(EINSY_RAMBO) + #include "pins_EINSY_RAMBO.h" // ATmega2560 #elif MB(ELEFU_3) #include "pins_ELEFU_3.h" // ATmega2560 #elif MB(LEAPFROG) diff --git a/Marlin/src/pins/pins_EINSY_RAMBO.h b/Marlin/src/pins/pins_EINSY_RAMBO.h new file mode 100644 index 0000000000000000000000000000000000000000..679f31ed3cfae33401d81a934b22a28e175fb8df --- /dev/null +++ b/Marlin/src/pins/pins_EINSY_RAMBO.h @@ -0,0 +1,174 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +/** + * Einsy-Rambo pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Einsy Rambo" +#define LARGE_FLASH true + +// +// TMC2130 Configuration_adv defaults for EinsyRambo +// +#if DISABLED(HAVE_TMC2130) + #error "You must enable TMC2130 support in Configuration_adv.h for EinsyRambo." +#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130) + #error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRambo." +#endif + +// TMC2130 Diag Pins (currently just for reference) +#define X_DIAG_PIN 64 +#define Y_DIAG_PIN 69 +#define Z_DIAG_PIN 68 +#define E0_DIAG_PIN 65 + +// +// Limit Switches +// +#define X_MIN_PIN 64 //12 +#define X_MAX_PIN -1 +#define Y_MIN_PIN 69 //11 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN 68 //10 +#define Z_MAX_PIN -1 + +// +// Z Probe (when not Z_MIN_PIN) +// +#ifndef Z_MIN_PROBE_PIN + #define Z_MIN_PROBE_PIN 10 +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 49 +#define X_ENABLE_PIN 29 +#define X_CS_PIN 41 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 48 +#define Y_ENABLE_PIN 28 +#define Y_CS_PIN 39 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 +#define Z_CS_PIN 67 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 +#define E0_CS_PIN 66 + +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 + +// Microstepping pins - uses SPI instead +#define X_MS1_PIN -1 +#define X_MS2_PIN -1 +#define Y_MS1_PIN -1 +#define Y_MS2_PIN -1 +#define Z_MS1_PIN -1 +#define Z_MS2_PIN -1 +#define E0_MS1_PIN -1 +#define E0_MS2_PIN -1 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 4 + +#define FAN_PIN 8 +#define FAN1_PIN 6 + +// +// Misc. Functions +// +#define SDSS 77 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 9 + +// +// M3/M4/M5 - Spindle/Laser Control +// +// use P1 connector for spindle pins +#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup! +#define SPINDLE_DIR_PIN 19 + +// +// Průša i3 MK2 Multiplexer Support +// +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #define KILL_PIN 32 + + #if ENABLED(NEWPANEL) + + #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS 85 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 70 + #define BTN_EN1 61 + #define BTN_EN2 59 + #else + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 61 + #define LCD_PINS_D4 59 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + #define BTN_EN1 14 + #define BTN_EN2 72 + #endif + + #define BTN_ENC 9 // AUX-2 + #define BEEPER_PIN 84 // AUX-4 + #define SD_DETECT_PIN 15 + + #endif // NEWPANEL +#endif // ULTRA_LCD