diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 75feb74fccea93efd7214adfed87f2fbc09d773c..dfffb2502731706f33a72e647530dafbfaef5d39 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 5ee886d469ec723449453f2fc6c5a584efd6afaa..52555e1e82ed1a684684cd4cdb3e37ff3df25b3f 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -985,6 +985,13 @@ void setup() {
#endif
#endif
+ #if ENABLED(COOLANT_MIST)
+ OUT_WRITE(COOLANT_MIST_PIN, COOLANT_MIST_INVERT); // Init Mist Coolant OFF
+ #endif
+ #if ENABLED(COOLANT_FLOOD)
+ OUT_WRITE(COOLANT_FLOOD_PIN, COOLANT_FLOOD_INVERT); // Init Flood Coolant OFF
+ #endif
+
#if HAS_BED_PROBE
endstops.enable_z_probe(false);
#endif
diff --git a/Marlin/src/gcode/control/M7-M9.cpp b/Marlin/src/gcode/control/M7-M9.cpp
new file mode 100644
index 0000000000000000000000000000000000000000..37221ed7e6e3701416ea7fe1c0090c0b51deb997
--- /dev/null
+++ b/Marlin/src/gcode/control/M7-M9.cpp
@@ -0,0 +1,63 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(COOLANT_CONTROL)
+
+#include "../gcode.h"
+#include "../../module/planner.h"
+
+#if ENABLED(COOLANT_MIST)
+ /**
+ * M7: Mist Coolant On
+ */
+ void GcodeSuite::M7() {
+ planner.synchronize(); // Wait for move to arrive
+ WRITE(COOLANT_MIST_PIN, !(COOLANT_MIST_INVERT)); // Turn on Mist coolant
+ }
+#endif
+
+#if ENABLED(COOLANT_FLOOD)
+ /**
+ * M8: Flood Coolant On
+ */
+ void GcodeSuite::M8() {
+ planner.synchronize(); // Wait for move to arrive
+ WRITE(COOLANT_FLOOD_PIN, !(COOLANT_FLOOD_INVERT)); // Turn on Flood coolant
+ }
+#endif
+
+/**
+ * M9: Coolant OFF
+ */
+void GcodeSuite::M9() {
+ planner.synchronize(); // Wait for move to arrive
+ #if ENABLED(COOLANT_MIST)
+ WRITE(COOLANT_MIST_PIN, COOLANT_MIST_INVERT); // Turn off Mist coolant
+ #endif
+ #if ENABLED(COOLANT_FLOOD)
+ WRITE(COOLANT_FLOOD_PIN, COOLANT_FLOOD_INVERT); // Turn off Flood coolant
+ #endif
+}
+
+#endif // COOLANT_CONTROL
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index 10021d5ef1305b14ad1197c3d7e60439ee0f240a..55137d20786a48953f6a6edd9a8d0f4bf41a748d 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -327,9 +327,19 @@ void GcodeSuite::process_parsed_command(
#endif
#if ENABLED(SPINDLE_LASER_ENABLE)
- case 3: M3_M4(false); break; // M3: turn spindle/laser on, set laser/spindle power/speed, set rotation direction CW
- case 4: M3_M4(true ); break; // M4: turn spindle/laser on, set laser/spindle power/speed, set rotation direction CCW
- case 5: M5(); break; // M5 - turn spindle/laser off
+ case 3: M3_M4(false); break; // M3: Turn ON Laser | Spindle (clockwise), set Power | Speed
+ case 4: M3_M4(true ); break; // M4: Turn ON Laser | Spindle (counter-clockwise), set Power | Speed
+ case 5: M5(); break; // M5: Turn OFF Laser | Spindle
+ #endif
+
+ #if ENABLED(COOLANT_CONTROL)
+ #if ENABLED(COOLANT_MIST)
+ case 7: M7(); break; // M7: Mist coolant ON
+ #endif
+ #if ENABLED(COOLANT_FLOOD)
+ case 8: M8(); break; // M8: Flood coolant ON
+ #endif
+ case 9: M9(); break; // M9: Coolant OFF
#endif
#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
@@ -339,9 +349,9 @@ void GcodeSuite::process_parsed_command(
case 17: M17(); break; // M17: Enable all stepper motors
#if ENABLED(SDSUPPORT)
- case 20: M20(); break; // M20: list SD card
- case 21: M21(); break; // M21: init SD card
- case 22: M22(); break; // M22: release SD card
+ case 20: M20(); break; // M20: List SD card
+ case 21: M21(); break; // M21: Init SD card
+ case 22: M22(); break; // M22: Release SD card
case 23: M23(); break; // M23: Select file
case 24: M24(); break; // M24: Start SD print
case 25: M25(); break; // M25: Pause SD print
diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h
index 7223abf55f8085fe7c8ab57bb34c025a811a6a55..cf1f1db26a1a23601b56a18b77e4805540358af3 100644
--- a/Marlin/src/gcode/gcode.h
+++ b/Marlin/src/gcode/gcode.h
@@ -75,9 +75,12 @@
*
* M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
* M1 -> M0
- * M3 - Turn laser/spindle on, set spindle/laser speed/power, set rotation to clockwise
- * M4 - Turn laser/spindle on, set spindle/laser speed/power, set rotation to counter-clockwise
- * M5 - Turn laser/spindle off
+ * M3 - Turn ON Laser | Spindle (clockwise), set Power | Speed. (Requires SPINDLE_LASER_ENABLE)
+ * M4 - Turn ON Laser | Spindle (counter-clockwise), set Power | Speed. (Requires SPINDLE_LASER_ENABLE)
+ * M5 - Turn OFF Laser | Spindle. (Requires SPINDLE_LASER_ENABLE)
+ * M7 - Turn mist coolant ON. (Requires COOLANT_CONTROL)
+ * M8 - Turn flood coolant ON. (Requires COOLANT_CONTROL)
+ * M9 - Turn coolant OFF. (Requires COOLANT_CONTROL)
* M12 - Set up closed loop control system. (Requires EXTERNAL_CLOSED_LOOP_CONTROLLER)
* M17 - Enable/Power all stepper motors
* M18 - Disable all stepper motors; same as M84
@@ -460,6 +463,16 @@ private:
static void M5();
#endif
+ #if ENABLED(COOLANT_CONTROL)
+ #if ENABLED(COOLANT_MIST)
+ static void M7();
+ #endif
+ #if ENABLED(COOLANT_FLOOD)
+ static void M8();
+ #endif
+ static void M9();
+ #endif
+
#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
static void M12();
#endif
diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h
index c03bd1db363378ba3a78dd86e06ed16f390fbc04..1880104f2d086cdb5ff68de1129aa44b96ebbf4d 100644
--- a/Marlin/src/pins/pinsDebug_list.h
+++ b/Marlin/src/pins/pinsDebug_list.h
@@ -172,6 +172,12 @@
#if PIN_EXISTS(CONTROLLER_FAN)
REPORT_NAME_DIGITAL(__LINE__, CONTROLLER_FAN_PIN)
#endif
+#if PIN_EXISTS(COOLANT_FLOOD)
+ REPORT_NAME_DIGITAL(__LINE__, COOLANT_FLOOD_PIN)
+#endif
+#if PIN_EXISTS(COOLANT_MIST)
+ REPORT_NAME_DIGITAL(__LINE__, COOLANT_MIST_PIN)
+#endif
#if PIN_EXISTS(CUTOFF_RESET)
REPORT_NAME_DIGITAL(__LINE__, CUTOFF_RESET_PIN)
#endif
diff --git a/Marlin/src/pins/pins_RAMBO.h b/Marlin/src/pins/pins_RAMBO.h
index b6890d9537c895363a6eaca022c8479b16a7c3da..0186abd1699e12aa789c8b03e6f72df09b898dc5 100644
--- a/Marlin/src/pins/pins_RAMBO.h
+++ b/Marlin/src/pins/pins_RAMBO.h
@@ -152,6 +152,12 @@
#define SPINDLE_LASER_ENA_PIN 31 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 32
+//
+// M7/M8/M9 - Coolant Control
+//
+#define COOLANT_MIST_PIN 22
+#define COOLANT_FLOOD_PIN 44
+
//
// Průša i3 MK2 Multiplexer Support
//
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 8eaa9d26215394f0a87269ca329a0aa7b41a7e5b..76ab4c3f50dd5ee7a10b73fd3cb3e1ce011c9dc3 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index a08b81bd7b8adc188bdab339f6a96671f070c449..8ce40f9941b776dd8136e32fa0a568eee6cd8787 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index ee047657eee238e96053fa804272e883a5b502bf..a24c7590aa789061a6f48cebfc093ade7adf79a4 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 67fc0d7f7f28c13452e9ad67d4a3a8f99434ee57..25cd1cd30721aa2d4d492a76b863854b5c1ae439 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 48b7d601484e5771a660f106e98529e1bbaad15e..499d2f54ff9a9660600d3ba6f9fa6a594b50ba05 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 48b7d601484e5771a660f106e98529e1bbaad15e..499d2f54ff9a9660600d3ba6f9fa6a594b50ba05 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index e3506563a5bd1e5acd0264a3e77a25a50e63c081..be718e3ea29cf862cc8664f8324f7f95d2392d62 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index 4af989d621c722ba57cc7549ee517ae88eeaafb6..c3468df0481f9fda6ce925f46287a47fbe1215cf 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 2b561075c33cfee31fea664f9ea57e42d3bee5ae..99443155c268d86113b973f52882d5d4eb58f9e5 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index f0d3f6a4d4f966681f9113bc198445781e7e0d1a..8bbcda2d11c83c99f120db975a8db438b240d2d6 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 2139ad2edae00e5868c4ad5e7e88fe947a2ca40b..2c5b961904553f1da3ab3f352f92b006330bf503 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 43ff189356d331cc3c56c817f2712273c5c347c0..7c8fdd96775a0404a8deb9a1cee4c05594813276 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -2118,6 +2118,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 5d56a069ff398c40573d211d935f35c8669cc9c4..205bbcb8eb17b18ab8bc810a358e5f4a84b04379 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index a7e35750fac09889de63da23dfb289fa02e4f32a..dd4dc088cb8cc41e2ca9fce17c109f9bf6d7da37 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 8c5ce1197b3071ee36eda4d5bac0138eeedd3754..e4ea9a3cbb6fcbe37b27709e59239ff1e8547444 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 977d44f98b951109006b17f6ca0a6de1ea682230..17b531ba587851d205064f261fef95e127d7528e 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -2122,6 +2122,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 8c5ce1197b3071ee36eda4d5bac0138eeedd3754..e4ea9a3cbb6fcbe37b27709e59239ff1e8547444 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index f214483c0066012adaa810e9109673941fbed674..08fefcab7fc2805e2927bc735afc2dc23573e161 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index 1c9ffbe89ed5731a614b544dc0040e8412e2ab51..02ab29f9fac2ace5b55307f4c939bd30d16f0bfd 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 28f7e846de58a8665412e44f40a26df750429143..e85f8fbd46e8283d060b16464b90cdf6f6518082 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index ba86d6cda476a61c87fc7f819f27754631357b2c..5f2e523ab106ce2a696e136c94e1c3a93ebfdcbd 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index e3d62adcf6b7b5ba019960b3d9f32b5948f098ef..49b321a6fe7f960534c942a03df2ee6d5f3de417 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index 4394b87a2f02037e97b76956228a1ea79f334fd4..1c7fd48cfcb94fdbb21923959acb8d8c013d3ef8 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index 676731e558e3f85c2ba067368ee7b9b3c64c7e88..f0195e93d49f0a3c755f51976c34b963ff06b6b1 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index cfce63e1b8f6c123e6a5dd8f04614f69a15c06af..098ef32495be50ca809f112ea80b001e02271b02 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index b3726ed45d464f170f8c1305ba1ce3f4738daf2d..b6bb809b49e27da2748babc31d8296e53247d5e3 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index 8004f9099352cdb023771217195e6f27d878ef6c..4377249a134054e5332298560360f7d46e368b92 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 57af2cb85e6b9c43de2ce0c88305a8e510ec2c00..4ba502fdeb40ed5280b6b309c6e2241abf1d9af2 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index e7c6628010ca2ae65d9cf71f20d8b8239faa8bba..ba20183b294a93fc74575f3f6a6a910ca63a2c85 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index fa442a2a9d601fa5b96b32ac84b738bd04f3a74d..98a74ad97540fb2b86cfe98d6d86f120a4d348de 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index f1d4b2324096f3c668bc01cf7ff3b2b015b13194..770c9232dcb4c24231ce82c9246223c502995046 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -2113,6 +2113,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 94d5d01d503e918d302dad16da7f29fac5ec0008..e37a8da4e956ae5b4b1b1a1c1a320dcb7deed510 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index dfa38b346ea35863b2243144ded5e17a501331c1..5b3c6a2509528fba177208d5dd9af320b26327f8 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 33926e0f67d5e1e9a4276b1c4664b9080e21a76d..d6fe806cfbd95d69bfd5280d20c6911c624b70c7 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -2118,6 +2118,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 72e947053511a154de35e41b9bf9004ba0611625..d6f929077d92365e2b0a411b554163d3876c785e 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -2118,6 +2118,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index f6d58ad7d64ffc722b1d4ef7962f02765bace1c6..581f41533f32b60b590a98c0ecfb17edcb818a87 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index fb4adacbbf580ba8cc4c8a37a1860c1fe51fe02e..d0b4bb566bbafa52b21a9797ad9545b36a691664 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 7272929c1ec9072b046729940978467d24d719ff..7230e38351fe6ee6e0b6a8069a550b9723718aa9 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index eee27b52692400c6a9895a448858a6c62e783987..a8d4a14c1699b78072fa8347bb4c7741bac9b8a0 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -2113,6 +2113,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 1da227c579d01c25a03757df0fccb085e5400bc8..f3ac2ee427cd5914638f7d7827075abcf518aef6 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 1da227c579d01c25a03757df0fccb085e5400bc8..f3ac2ee427cd5914638f7d7827075abcf518aef6 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index ed999aa442f5874b697fca2415d5316301191eef..9c7e3303368dd4c8b296fbbf1b30cd0ef3df8e43 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 5cdd68190d58c1ae627c4f53404273222f8df111..b67e790c0652b0fcdfbbc6b29123ba7ab5f533e2 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 452bdd21943b46765c373c92d3fd1328724a62aa..93e13285e9e4e6f06908a4408f26fd977ef9fdbf 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 4e53372d651dd802d3d7ff9615f350f914d4dd01..dd976fb3468cfc4bf494c116e9637db385232022 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 8b6620cf6ea40b5a96329b00b4c0cc8156e2283a..d033732401a9a049ccef125a01c8b9e48b9da226 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index e171234ec24182c876ab63ec0c0d2670b520b520..b47520e53c72106263195ed5dcea83375f329833 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index d4d1c1b4dbe9166d5d96fbf0791f6e670303ed04..76ecb44e7f286ff4bae3144473441c34a7573276 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 9fa8599cf0fdfcf9a367f641ab4933f2df381dd7..8457da5a4bdeb862bc54c2c2a6eb0467cd86e019 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -2115,6 +2115,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 62f67bf4d430be1b0a3bd47915adf03f5adabd20..4f141b0c8cf214a80df3ef754f6d05446edd5c13 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 897bab92909d7d9349c098df57692316fde88b96..f3c40868462f03673af39db75f77285220a2b693 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 06a92bae5f7b733cb21a9c932f466bc54d3c1913..eadc6552f596c0da4b1b006d87c3ba4309b6ee86 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 3a34babc037b28dcaffe4e8c35043e377293e68f..d8987266e7851d51558117dc0aef52cc03e91793 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -2112,6 +2112,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index c03420692dbc0ca856e90ac2e5e5498f4e3a4011..517765c5c20de4cfbc86753d9d62f2ca2db02356 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 971abbc0224eb95ceadf454e3fec246a267aaa28..d0a51a1811bf22e5134717edc4167e56268534e6 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 5bda91343c8e2f54df2edf1404e851fa59d56468..6cd2aeda5efc504d1d22cdfff90b46791ca56277 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index ec19076325726cdd1501a236fbaa9f86ee311820..54754155340cefd98c17ab8e0620404b158ba17b 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 2ec474a8844055bd7ff5a5e666a77fe51071c8dd..e1fea3a382ae8651e6d7ecccea4921b29a7dca62 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 666ee419ac653db2d0146a1d9e0e5c92ca157265..c78d52e17071f63c99145f4231983f580b03a11b 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 6a9f880154ab97fcce831ff19ebf9020063177d6..a87d3b6f06f83b20d72d7001165c53722118281a 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index fe2c87b14e88a72970b7ed6433fdf40977fc4628..64699d673c83834a9b6108a7cce8b3ef3117216c 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index b011155c8ffbe0d4e461d0188194df5dd9e18c74..17cd6f5e3aac6108dbbfc09a521c85079cceb433 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -2127,6 +2127,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 892f3720727ec1cd07028b87aa50529058e83b33..df9a273d865b6b4037ce9fabad12a32e00a47c59 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index f5abd3d22a6f89248d736d12b4efaee58756389d..45baa2a56e6d57e3fe7ac17b5b4d238d837238fd 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 006d34b46f9764f4fd638d4f84f61197ab819ca3..b02233223508e35446803fc9fcd1ac23faa89653 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 2e4077946991209b103178a75fd209191741e7ab..aa75df05f0822e7baa6bbc56649e61f443553e99 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 71ba2e9e39cd7fc7f8402a8ab4a6a9022f30a01c..341febfd9d0017b59e355affcc2e53a641bc0b3d 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 71ba2e9e39cd7fc7f8402a8ab4a6a9022f30a01c..341febfd9d0017b59e355affcc2e53a641bc0b3d 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index e4bbdeedf615a2461de49357b101be89509fc9d6..dcd0a03cf58d958025d4f8c3dfbafcf360890e4c 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index e4bbdeedf615a2461de49357b101be89509fc9d6..dcd0a03cf58d958025d4f8c3dfbafcf360890e4c 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index ac0223470f179c8dc3051db715c7c8aa6e98765f..5d9b8508c93773c5c3d30b1c1df47bfc063b0d81 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 9dad3e393c68854155f6c18f3f098e8654d92798..4ad2e65515e4029b2b68d9f5973d8d2dec03c1ac 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index e4bbdeedf615a2461de49357b101be89509fc9d6..dcd0a03cf58d958025d4f8c3dfbafcf360890e4c 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 72b6b8b9936502ff7e77e1e6d004e80e1faff5db..b36189b8ba61d54550f54b1742da7985ed109979 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -2115,6 +2115,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 12a2d1913ea74be05b57ee5be5f03c1218d16c17..2dc986ebabdf53ab2209a4c3201dbb195cc0c350 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -2116,6 +2116,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index eeacf34c1b59108f10d8e8d012bbfb0e3b7a5617..810c00aa6f9c72acb3fb74d8b9f38e7dc004af28 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index 1006f155267b79dcfc438f2511f7302089a63145..5a4f060442ff5b276080d8d5be00b3d8edbd81f5 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 0b28c5faf3bca393af1633c1154ed48f695a6c9b..85436643b61fdde12e8775a40faa3851f185d13b 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -2114,6 +2114,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index edf7127228b245d33eb49311f3e6b64ae49d7d5a..debdf86f63134734db1dad477efb76423a75e932 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -2115,6 +2115,21 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+ #define COOLANT_MIST // Enable if mist coolant is present
+ #define COOLANT_FLOOD // Enable if flood coolant is present
+ #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed
+ #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed
+#endif
+
/**
* Filament Width Sensor
*