diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 1f0bc0559b1540571b64233f5ae99a07aa403288..104a797cb0348bf61afc3732654e5e50cd8aafcb 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h index 1f0bc0559b1540571b64233f5ae99a07aa403288..104a797cb0348bf61afc3732654e5e50cd8aafcb 100644 --- a/Marlin/src/config/default/Configuration.h +++ b/Marlin/src/config/default/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index b09e0bfb7427e869716e60c158dab9a4c6854c73..6afa4a76f1d84b193bbabe849969f00cacd76bf0 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -1877,7 +1877,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index e4508b29d415fa9b8a429156e9b24fc1e71108fc..0c5044e8ca8d056929d3e073715b4821ba51baaf 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index f0e6ead230482031198fa967255e23fefc062dfb..15c5c1a82fd9c94d10802b56cfb1fc00e80c5890 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -2035,7 +2035,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 652969bab53cbd7497b19b7bb83ded5fbbafa664..243004e9ce4d348bbdde24258b42eaa67de57671 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -1866,7 +1866,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 6cb02526caa55c7c172e2034018a7c07bea4221f..0a6c03a48d33edd12470e8fd773b3413ed56c4c1 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -1900,7 +1900,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index 08ddfd9f4b1320e9f78e14345ad91901d41e4ef5..791202ee1e3a7386f616efc07a890430c1b28535 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index 0a4f830282b4a98a8afba72698398f66355b26ce..c6625526b7986b57dc06c109e4ccb2bbacf8c7b4 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index adde4cf3007fb5f7409683852e832cd45d6e0448..8aaeee32f4a8ea667f6c12f75a34064884f4deaf 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -1845,7 +1845,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 891a722e012f180a6508b4377ec085208f41d698..be28e9ee6b13dc6b1171ddd5bd5343d34c3f6828 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index e5de42f7eda0c190ca53032834c833e216f50291..a737bdf75c80fcf26a46e610d64efbc4d960092b 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -1845,7 +1845,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 9d0155271c5617e5327cefacb7066b43c66141d1..699921218727dd3f38ec6aa94f0dd2abc935a3a4 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -1856,7 +1856,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index f95cf69fa682de11a07fa7a8c8451346f6627eee..23b40f86afd855acc1f33e36e1689e35c5450ef2 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -1890,7 +1890,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index 40dde29f39f58e093689ee2e918c06f5e8a2603b..ce16d8f7002e34e5fd06934615d2273243676558 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -1881,7 +1881,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index d1be6f598cd52358d3d0069d85bc376448236103..475fdaef9f880b4c99b1e788a9b013f407c028f0 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -1899,7 +1899,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h index 1a5d4b10ffaf6955d6446c1f6c97844e6568ada8..080a8ef80489033af6ffeb494bb42458460edcbc 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h @@ -1890,7 +1890,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h index 5ebfe439446950bfc6be8dea1dd4a209649cc1ad..f6d246a53b567304e8ee7004fd70161cbca5f1ef 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h @@ -1884,7 +1884,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h index 54300ff1bd9154e7a7e62e628a00182cc4a45be1..d963848db84613d7f0fb847046086e6bff4c37ab 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h @@ -1884,7 +1884,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h index b2796b94cc9db7b1bda89ce3cc9dffa83f7b2f77..511c6ece9ab55196a2eb0486f38f3dc5baa69d19 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h @@ -1890,7 +1890,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index a88c4f5b6cf3e7726d36e23e5a563a99c683cd25..8aeadeb90af3a967e00f9790f904ccbb27d5c510 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -1862,7 +1862,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 9bfaa9f871c6cb08ff75a299560b08ab8527fd77..a1fd1a9fce94087551395cd01d1723f24c527140 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -1862,7 +1862,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index f0ac0d614a97f2bb5e7a18cbce2994b6c270df28..d273ae8c7067c8c011502218bcc0fc72e718dc1c 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1863,7 +1863,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 493a492f213e2be0005e49c1687c6116be892a8e..701bfff164e651d725d7bf580945d37fa8598fa9 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -1895,7 +1895,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 5aea57a9650c5af5ff044f964930ea9cdbf0444b..b21b159e11841f45aaa9c64173a7c336da48f3eb 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 4cd0a02a347dc8829e8e1b28b3d079dcf331b9a8..1f63eaae3dfe42ccfa02509773302a139bf3c09d 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1896,7 +1896,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index d6a77666912494d6c94ae91e863c6fb79325eaaa..226911d180d495d5c012371fef3f72679dc71134 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1895,7 +1895,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index dbf2903554c43239cd75792404fb2e83a58b1024..794f9e617679eec28863f09d4ec68af9358cb9b9 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 632e418e54ee23155fc7caed1758a5ae06396894..b07e556582ebd7bde7840b77c263f1570a9e7add 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index eee0e13f4a9dac9d88bbb62abf5cafcb36f8aaf5..a18577f838e90aa38403323c0cf555566f9b86a6 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -1861,7 +1861,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 6a6f4191b40f8b05d7ef279436dad41bfa83b55f..28d1eaa8319bd0c6fae4ca9ce9cf6bcc4f60e746 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -1891,7 +1891,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 156f08d435131ff554085d9819846d82f0cbfcae..123173c71e9398497eab16552a361dda34337c0d 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -1877,7 +1877,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 7fb76c2d0991e47c4636280fcc0a01e1f600f04d..5133bf509d0c9c34748205b5cd3c565bc142d5ed 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -1885,7 +1885,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index 123d58c31169181a9f0d9268207253ee837e54f6..9b3005498b6562aa1bdc3550828d2b2054a3a8e9 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -1879,7 +1879,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index 1eda0e38abc8ac9cd8e8b4a7a8ab680be0d6c4c9..098b149ee63869774dcb151d3899a3f48a5d4a93 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -1884,7 +1884,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 4562739e662645555292fe50a93db4ebb9bad5a8..f5b1ef7fdabd13ade1da9e2d2eb454930856e598 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1861,7 +1861,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index d1839c2fde03a23e36c72caeea9c681b2a716767..51dff291a9c0facffaf19691fd689a55eca64ed5 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h index b7932fa21391d8f34ab7cb6b0d173dc48c049002..f0217ec30a8c11a220a5ff5311199661060455f7 100644 --- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h +++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h @@ -1929,7 +1929,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index 05c8c59b7e5f17c36499aebf4a169001e888b28e..1dd0e41fe50aa97244c7ac83aab319be8f6ee8cb 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index 5dfb32365d435843ecc2816dfb7f06f4dd5ec7d5..5379744fd6080d9c170bd834acc98197dd01356d 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 85b412b61529137818da480ae53d694d68b4cf42..50497c9ba52150877629c515cb9442bc2e703177 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -1870,7 +1870,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 1d90ffea96c4ec3cd338bfed1fca6a15aa7564cb..76efc90bb987bfdf544cdb28f495523271e7a68e 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -1882,7 +1882,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h index 43b6b5562fdda34ce4cf5e4ac9ba3a9d72bfeb2f..00fb09416b983279d4996e6269ad1bb0ab1467d3 100644 --- a/Marlin/src/config/examples/STM32F4/Configuration.h +++ b/Marlin/src/config/examples/STM32F4/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 485f6c560aa0b5fb1defd127102f8f4b4ad6b6b0..a8ec8b1df994ccc0fd0e24dd51ae362bd37446c5 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -1911,7 +1911,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 2485489c6c27104d77e2fcff5eeaa0117ebb245b..8da6fa860e3262139c7efac56dbb9c5d388a1f06 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index e2520b0d8f88fd3f1d011d976f15db4e0e034b36..5b9e13ea0312a62835a3d5063e3b06ab6975d601 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -1936,7 +1936,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index ce0b0d8b0a0843c8bf14bad73c396afa29c34966..759178b033882ea0622fb172fe0b5232376a4809 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index c47e26e424373e28b7dcfa077075c16e00e86ff2..46ad95f9a01a7e6cbbbaffefffc33a4d0a6ebad7 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index 0770e05158782be0ba4270e8af98e6d1008295c7..3d19372b3ca89794a15f2d7f7718b655f1fd6575 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -1891,7 +1891,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index cff4bbadda55b5ca13524930d528e3a0825bf668..34b0e60cfd3bad68b12195d156c88ddcad72453e 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -1880,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index 84de01ab025b4ad37faa3c49944dbac720a53253..97215c9b15cc53a68332f15088d770af1efcbc93 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -1915,7 +1915,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index c6a388dd0ece3cb7ea0c1a1cabfb30ca78e03431..cf35acc3885fa4c71e685842db467a76389be5bb 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index e6b1ccdadf2dd4566b3fa5160e3c85f924e79413..d5dcea666e17a03dd2a59a5db0af2878ca44d7e8 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1857,7 +1857,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 78f3fb4f83a46643e3df11a089857a4b9101d314..e1fb3214d3471acff811afd109317897edaf7e54 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1893,7 +1893,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index 26e0b4ddb2ccc596b3e75a5b4d680dca062f59eb..a5b8763b118b1200a5a0e548f5cf7e5b23f4d096 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -1886,7 +1886,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index a1d2581df7608f789094603f3c32da860c7efee0..5b7a29d28e9e4bdb0e2d8c6a7ad7ff583fd1d5b3 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1993,7 +1993,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index eba89a317f1305a344c9114d0029304596abb151..f9cc2063f1013c2c34bce4800ada8c1dfea35e20 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1992,7 +1992,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 3a6dc2ff44cf8db5564e7f90a6d7e74836ad62de..369dd65ff8fcc7b4fde36692067ef7825380650d 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -2014,7 +2014,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index 505d1077f036754d2b5f74d4932f471fff7d0dfd..f9bb2a615f0039926d350fd8682d9d9f9afa8d47 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1994,7 +1994,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 2fd8f32c4a97beee4e37286c294ffd4ed6e56e28..e6360aa25003dc7e570ce6351896f6b11a4e989d 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -1979,7 +1979,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 3df1ca640202ee87ec2b89793710fff6930a0db6..eed168e1846fe911947b1270d03d308c33137225 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -2004,7 +2004,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index cd4457bbfac3f8e2aa2010d401e97b6a1cb05b89..aad17a7c86c2f40a04ae92007f8c6091fab31ca7 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -2005,7 +2005,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index f8fcb4a69134ea4ccfe253be133b1e5712b58d57..f68396106ca71830fca18d280977824e2ccbaa66 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -2005,7 +2005,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index 884f574e5bf917c03563ec9afe2faafccffc9e01..d8a755e0113b3748b4324b1fa958b318d7690d62 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1894,7 +1894,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index 7e9117b6ef130d7a63cce95f4fe9a51da0643c13..57ec8ee588082147846250bd90942e549852ac0d 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -1883,7 +1883,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index 0739a5836d3d44fc14e6e3f8a322e6826020ed9b..fb18c0721f18101ad88eee9295c4a3e4414ab7da 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -1882,7 +1882,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index 373d8f0d3c6c7859b29928ea797cc2145d08bc56..dd59302c2ba3785e4019dd980b8f881ad0fb9c73 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -1852,7 +1852,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 25a87536982b3e13084ed6a9678e860174191f2b..57b090552537de092590e15dd8bef99a391870f3 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -1885,7 +1885,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs