From b7eeb5b13b4f299b8e1b994d678e35262a1c09b0 Mon Sep 17 00:00:00 2001
From: InsanityAutomation
<38436470+InsanityAutomation@users.noreply.github.com>
Date: Mon, 10 Jun 2019 18:46:42 -0400
Subject: [PATCH] Move BLTouch options to adv config (#14131)
Plus other BLTouch and menu enhancements.
---
Marlin/Configuration.h | 66 ------------------
Marlin/Configuration_adv.h | 67 +++++++++++++++++++
Marlin/src/lcd/language/language_en.h | 3 +
Marlin/src/lcd/menu/menu_configuration.cpp | 16 +++--
Marlin/src/lcd/ultralcd.cpp | 37 ++++++++--
Marlin/src/lcd/ultralcd.h | 6 +-
config/default/Configuration.h | 66 ------------------
config/default/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/3DFabXYZ/Migbot/Configuration.h | 66 ------------------
.../3DFabXYZ/Migbot/Configuration_adv.h | 67 +++++++++++++++++++
.../AlephObjects/TAZ4/Configuration.h | 66 ------------------
.../AlephObjects/TAZ4/Configuration_adv.h | 67 +++++++++++++++++++
.../AliExpress/CL-260/Configuration.h | 66 ------------------
.../AliExpress/UM2pExt/Configuration.h | 66 ------------------
.../AliExpress/UM2pExt/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Anet/A2/Configuration.h | 66 ------------------
config/examples/Anet/A2/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Anet/A2plus/Configuration.h | 66 ------------------
.../examples/Anet/A2plus/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Anet/A6/Configuration.h | 66 ------------------
config/examples/Anet/A6/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Anet/A8/Configuration.h | 66 ------------------
config/examples/Anet/A8/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Anet/A8plus/Configuration.h | 66 ------------------
.../examples/Anet/A8plus/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Anet/E16/Configuration.h | 66 ------------------
config/examples/Anet/E16/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/AnyCubic/i3/Configuration.h | 66 ------------------
.../examples/AnyCubic/i3/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/ArmEd/Configuration.h | 66 ------------------
config/examples/ArmEd/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Azteeg/X5GT/Configuration.h | 66 ------------------
.../BIBO/TouchX/cyclops/Configuration.h | 66 ------------------
.../BIBO/TouchX/cyclops/Configuration_adv.h | 67 +++++++++++++++++++
.../BIBO/TouchX/default/Configuration.h | 66 ------------------
.../BIBO/TouchX/default/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/BQ/Hephestos/Configuration.h | 66 ------------------
.../examples/BQ/Hephestos/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/BQ/Hephestos_2/Configuration.h | 66 ------------------
.../BQ/Hephestos_2/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/BQ/WITBOX/Configuration.h | 66 ------------------
config/examples/BQ/WITBOX/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Cartesio/Configuration.h | 66 ------------------
config/examples/Cartesio/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Creality/CR-10/Configuration.h | 66 ------------------
.../Creality/CR-10/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Creality/CR-10S/Configuration.h | 66 ------------------
.../Creality/CR-10S/Configuration_adv.h | 67 +++++++++++++++++++
.../Creality/CR-10_5S/Configuration.h | 66 ------------------
.../Creality/CR-10_5S/Configuration_adv.h | 67 +++++++++++++++++++
.../Creality/CR-10mini/Configuration.h | 66 ------------------
.../Creality/CR-10mini/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Creality/CR-8/Configuration.h | 66 ------------------
.../Creality/CR-8/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Creality/Ender-2/Configuration.h | 66 ------------------
.../Creality/Ender-2/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Creality/Ender-3/Configuration.h | 66 ------------------
.../Creality/Ender-3/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Creality/Ender-4/Configuration.h | 66 ------------------
.../Creality/Ender-4/Configuration_adv.h | 67 +++++++++++++++++++
.../Dagoma/Disco Ultimate/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Einstart-S/Configuration.h | 66 ------------------
.../examples/Einstart-S/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Felix/Configuration.h | 66 ------------------
config/examples/Felix/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Felix/DUAL/Configuration.h | 66 ------------------
.../FlashForge/CreatorPro/Configuration.h | 66 ------------------
.../FlashForge/CreatorPro/Configuration_adv.h | 67 +++++++++++++++++++
.../FolgerTech/i3-2020/Configuration.h | 66 ------------------
.../FolgerTech/i3-2020/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Formbot/Raptor/Configuration.h | 66 ------------------
.../Formbot/Raptor/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Formbot/T_Rex_2+/Configuration.h | 67 -------------------
.../Formbot/T_Rex_2+/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Formbot/T_Rex_3/Configuration.h | 66 ------------------
.../Formbot/T_Rex_3/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Geeetech/A10M/Configuration.h | 66 ------------------
.../Geeetech/A10M/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Geeetech/A20M/Configuration.h | 66 ------------------
.../Geeetech/A20M/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Geeetech/GT2560/Configuration.h | 66 ------------------
.../Geeetech/I3_Pro_X-GT2560/Configuration.h | 3 -
.../Geeetech/MeCreator2/Configuration.h | 66 ------------------
.../Geeetech/MeCreator2/Configuration_adv.h | 67 +++++++++++++++++++
.../Prusa i3 Pro B/bltouch/Configuration.h | 66 ------------------
.../Prusa i3 Pro B/noprobe/Configuration.h | 66 ------------------
.../Geeetech/Prusa i3 Pro C/Configuration.h | 66 ------------------
.../Prusa i3 Pro C/Configuration_adv.h | 67 +++++++++++++++++++
.../Geeetech/Prusa i3 Pro W/Configuration.h | 66 ------------------
.../Prusa i3 Pro W/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Infitary/i3-M508/Configuration.h | 66 ------------------
.../Infitary/i3-M508/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/JGAurora/A5/Configuration.h | 66 ------------------
.../examples/JGAurora/A5/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/MakerParts/Configuration.h | 66 ------------------
.../examples/MakerParts/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Malyan/M150/Configuration.h | 66 ------------------
.../examples/Malyan/M150/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Malyan/M200/Configuration.h | 66 ------------------
.../examples/Malyan/M200/Configuration_adv.h | 67 +++++++++++++++++++
.../Micromake/C1/basic/Configuration.h | 66 ------------------
.../Micromake/C1/enhanced/Configuration.h | 66 ------------------
.../Micromake/C1/enhanced/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Mks/Robin/Configuration.h | 66 ------------------
config/examples/Mks/Robin/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Mks/Sbase/Configuration.h | 66 ------------------
config/examples/Mks/Sbase/Configuration_adv.h | 67 +++++++++++++++++++
.../Printrbot/PrintrboardG2/Configuration.h | 66 ------------------
.../examples/RapideLite/RL200/Configuration.h | 66 ------------------
.../RapideLite/RL200/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/RepRapPro/Huxley/Configuration.h | 66 ------------------
.../RepRapWorld/Megatronics/Configuration.h | 66 ------------------
config/examples/RigidBot/Configuration.h | 66 ------------------
config/examples/RigidBot/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/SCARA/Configuration.h | 66 ------------------
config/examples/SCARA/Configuration_adv.h | 67 +++++++++++++++++++
.../STM32/Black_STM32F407VET6/Configuration.h | 66 ------------------
.../Black_STM32F407VET6/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/STM32/STM32F10/Configuration.h | 66 ------------------
config/examples/STM32/STM32F4/Configuration.h | 66 ------------------
.../STM32/stm32f103ret6/Configuration.h | 66 ------------------
config/examples/Sanguinololu/Configuration.h | 66 ------------------
.../examples/Sanguinololu/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/TheBorg/Configuration.h | 66 ------------------
config/examples/TheBorg/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/TinyBoy2/Configuration.h | 66 ------------------
config/examples/TinyBoy2/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Tronxy/X1/Configuration.h | 66 ------------------
config/examples/Tronxy/X3A/Configuration.h | 66 ------------------
.../examples/Tronxy/X3A/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Tronxy/X5S-2E/Configuration.h | 66 ------------------
.../Tronxy/X5S-2E/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/Tronxy/X5S/Configuration.h | 66 ------------------
config/examples/Tronxy/XY100/Configuration.h | 66 ------------------
.../UltiMachine/Archim1/Configuration.h | 66 ------------------
.../UltiMachine/Archim1/Configuration_adv.h | 67 +++++++++++++++++++
.../UltiMachine/Archim2/Configuration.h | 66 ------------------
.../UltiMachine/Archim2/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/VORONDesign/Configuration.h | 66 ------------------
.../examples/VORONDesign/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Velleman/K8200/Configuration.h | 66 ------------------
.../Velleman/K8200/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/Velleman/K8400/Configuration.h | 66 ------------------
.../Velleman/K8400/Configuration_adv.h | 67 +++++++++++++++++++
.../Velleman/K8400/Dual-head/Configuration.h | 66 ------------------
.../examples/WASP/PowerWASP/Configuration.h | 66 ------------------
.../WASP/PowerWASP/Configuration_adv.h | 67 +++++++++++++++++++
.../Wanhao/Duplicator 6/Configuration.h | 66 ------------------
.../Wanhao/Duplicator 6/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/adafruit/ST7565/Configuration.h | 66 ------------------
.../delta/Anycubic/Kossel/Configuration.h | 66 ------------------
.../delta/Anycubic/Kossel/Configuration_adv.h | 67 +++++++++++++++++++
.../FLSUN/auto_calibrate/Configuration.h | 66 ------------------
.../FLSUN/auto_calibrate/Configuration_adv.h | 67 +++++++++++++++++++
.../delta/FLSUN/kossel/Configuration.h | 66 ------------------
.../delta/FLSUN/kossel/Configuration_adv.h | 67 +++++++++++++++++++
.../delta/FLSUN/kossel_mini/Configuration.h | 66 ------------------
.../FLSUN/kossel_mini/Configuration_adv.h | 67 +++++++++++++++++++
.../Geeetech/Rostock 301/Configuration.h | 66 ------------------
.../Geeetech/Rostock 301/Configuration_adv.h | 67 +++++++++++++++++++
.../delta/Hatchbox_Alpha/Configuration.h | 66 ------------------
.../examples/delta/MKS/SBASE/Configuration.h | 66 ------------------
.../delta/MKS/SBASE/Configuration_adv.h | 67 +++++++++++++++++++
.../delta/Tevo Little Monster/Configuration.h | 3 -
.../Tevo Little Monster/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/delta/generic/Configuration.h | 66 ------------------
.../delta/generic/Configuration_adv.h | 67 +++++++++++++++++++
.../delta/kossel_mini/Configuration.h | 66 ------------------
.../delta/kossel_mini/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/delta/kossel_pro/Configuration.h | 66 ------------------
.../examples/delta/kossel_xl/Configuration.h | 66 ------------------
.../delta/kossel_xl/Configuration_adv.h | 67 +++++++++++++++++++
.../examples/gCreate/gMax1.5+/Configuration.h | 3 -
.../gCreate/gMax1.5+/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/makibox/Configuration.h | 66 ------------------
config/examples/makibox/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/tvrrug/Round2/Configuration.h | 66 ------------------
.../tvrrug/Round2/Configuration_adv.h | 67 +++++++++++++++++++
config/examples/wt150/Configuration.h | 66 ------------------
config/examples/wt150/Configuration_adv.h | 67 +++++++++++++++++++
180 files changed, 5277 insertions(+), 6291 deletions(-)
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 59e2d5c723..df435b970d 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 43745fc5ba..230554c340 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
index aa4770bfd5..163f7e83a6 100644
--- a/Marlin/src/lcd/language/language_en.h
+++ b/Marlin/src/lcd/language/language_en.h
@@ -933,6 +933,9 @@
#ifndef MSG_BLTOUCH_MODE_ECHO
#define MSG_BLTOUCH_MODE_ECHO _UxGT("Report Drain")
#endif
+#ifndef MSG_BLTOUCH_MODE_CHANGE
+ #define MSG_BLTOUCH_MODE_CHANGE _UxGT("DANGER: Bad settings can cause damage! Proceed anyway?")
+#endif
#ifndef MSG_MANUAL_DEPLOY
#define MSG_MANUAL_DEPLOY _UxGT("Deploy Z-Probe")
#endif
diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp
index 793490be10..3e666d9f14 100644
--- a/Marlin/src/lcd/menu/menu_configuration.cpp
+++ b/Marlin/src/lcd/menu/menu_configuration.cpp
@@ -199,11 +199,19 @@ static void lcd_factory_settings() {
MENU_ITEM(function, MSG_BLTOUCH_STOW, bltouch._stow);
MENU_ITEM(function, MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode);
#if ENABLED(BLTOUCH_LCD_VOLTAGE_MENU)
- MENU_ITEM(function, MSG_BLTOUCH_5V_MODE, bltouch._set_5V_mode);
- MENU_ITEM(function, MSG_BLTOUCH_OD_MODE, bltouch._set_OD_mode);
+ MENU_ITEM(submenu, MSG_BLTOUCH_5V_MODE, []{
+ do_select_screen(PSTR(MSG_BLTOUCH_5V_MODE), PSTR(MSG_BUTTON_CANCEL), bltouch._set_5V_mode, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE));
+ });
+ MENU_ITEM(submenu, MSG_BLTOUCH_OD_MODE, []{
+ do_select_screen(PSTR(MSG_BLTOUCH_OD_MODE), PSTR(MSG_BUTTON_CANCEL), bltouch._set_OD_mode, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE));
+ });
MENU_ITEM(function, MSG_BLTOUCH_MODE_STORE, bltouch._mode_store);
- MENU_ITEM(function, MSG_BLTOUCH_MODE_STORE_5V, bltouch.mode_conv_5V);
- MENU_ITEM(function, MSG_BLTOUCH_MODE_STORE_OD, bltouch.mode_conv_OD);
+ MENU_ITEM(submenu, MSG_BLTOUCH_MODE_STORE_5V, []{
+ do_select_screen(PSTR(MSG_BLTOUCH_MODE_STORE_5V), PSTR(MSG_BUTTON_CANCEL), bltouch.mode_conv_5V, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE));
+ });
+ MENU_ITEM(submenu, MSG_BLTOUCH_MODE_STORE_OD, []{
+ do_select_screen(PSTR(MSG_BLTOUCH_MODE_STORE_OD), PSTR(MSG_BUTTON_CANCEL), bltouch.mode_conv_OD, ui.goto_previous_screen, PSTR(MSG_BLTOUCH_MODE_CHANGE));
+ });
MENU_ITEM(function, MSG_BLTOUCH_MODE_ECHO, bltouch_report);
#endif
END_MENU();
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 855be5bce2..4822ebd2d7 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -196,10 +196,39 @@ millis_t next_button_update_ms;
#endif
- void _wrap_string(uint8_t &x, uint8_t &y, const char * const string, read_byte_cb_t cb_read_byte) {
+ void _wrap_string(uint8_t &x, uint8_t &y, const char * const string, read_byte_cb_t cb_read_byte, bool wordwrap/*=false*/) {
SETCURSOR(x, y);
- if (string) {
- uint8_t *p = (uint8_t*)string;
+ if (!string) return;
+
+ uint8_t *p = (uint8_t*)string;
+ if (wordwrap) {
+ uint8_t *wrd = p, c = 0;
+ for (;;) {
+ wchar_t ch;
+ p = get_utf8_value_cb(p, cb_read_byte, &ch);
+ const bool eol = !ch;
+ if (eol || ch == ' ' || ch == '-' || ch == '+' || ch == '.') {
+ if (!c && ch == ' ') continue; // collapse extra spaces
+ if (x + c > LCD_WIDTH && c < (LCD_WIDTH) * 3 / 4) { // should it wrap?
+ x = 0; y++; // move x to string len (plus space)
+ SETCURSOR(0, y); // simulate carriage return
+ }
+ c += !eol; // +1 so the space will be printed
+ x += c; // advance x to new position
+ while (c--) { // character countdown
+ wrd = get_utf8_value_cb(wrd, cb_read_byte, &ch); // get characters again
+ lcd_put_wchar(ch); // word (plus space) to the LCD
+ }
+ if (eol) break; // all done
+ wrd = nullptr; // set up for next word
+ }
+ else {
+ if (!wrd) wrd = p; // starting a new word?
+ c++; // count word characters
+ }
+ }
+ }
+ else {
for (;;) {
wchar_t ch;
p = get_utf8_value_cb(p, cb_read_byte, &ch);
@@ -221,7 +250,7 @@ millis_t next_button_update_ms;
x = (LCD_WIDTH - plen - slen) / 2;
y = LCD_HEIGHT > 3 ? 1 : 0;
}
- wrap_string_P(x, y, pref);
+ wrap_string_P(x, y, pref, true);
if (string) {
if (x) { x = 0; y++; } // Move to the start of the next line
wrap_string(x, y, string);
diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h
index 630539a986..97c87dfe11 100644
--- a/Marlin/src/lcd/ultralcd.h
+++ b/Marlin/src/lcd/ultralcd.h
@@ -74,9 +74,9 @@
#include "fontutils.h"
- void _wrap_string(uint8_t &x, uint8_t &y, const char * const string, read_byte_cb_t cb_read_byte);
- inline void wrap_string_P(uint8_t &x, uint8_t &y, PGM_P const pstr) { _wrap_string(x, y, pstr, read_byte_rom); }
- inline void wrap_string(uint8_t &x, uint8_t &y, const char * const string) { _wrap_string(x, y, string, read_byte_ram); }
+ void _wrap_string(uint8_t &x, uint8_t &y, const char * const string, read_byte_cb_t cb_read_byte, const bool wordwrap=false);
+ inline void wrap_string_P(uint8_t &x, uint8_t &y, PGM_P const pstr, const bool wordwrap=false) { _wrap_string(x, y, pstr, read_byte_rom, wordwrap); }
+ inline void wrap_string(uint8_t &x, uint8_t &y, const char * const string, const bool wordwrap=false) { _wrap_string(x, y, string, read_byte_ram, wordwrap); }
#if ENABLED(SDSUPPORT)
#include "../sd/cardreader.h"
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index 59e2d5c723..df435b970d 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 9071fc039d..6dbcbf1b8c 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index bea7102db4..3af58dea1a 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -834,72 +834,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 21a8cdfa33..f48d739806 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 3dbed3611f..0d83bc6fa0 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -848,72 +848,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 13ff792a45..b49e93cd65 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index 30a00a9021..5a176a46a2 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 063a7763f3..dd8b032909 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -839,72 +839,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index fff92af616..df85efde7c 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 0e26631361..d0f906a658 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 1ec40e8302..65e599a8b7 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 58a363950c..5f7ba36a82 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 1ec40e8302..65e599a8b7 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 1f27ff610f..9f84b89cb7 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -875,72 +875,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 5d3fae65d2..6560ed4124 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index 23d14e7bc7..df687c95f0 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -841,72 +841,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index c76c6be3d9..771107dc48 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 1bec886b93..5ad6b5d60e 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -839,72 +839,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index d238fab4ff..aa066ceea2 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 421ea5b4fc..90fa55db19 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -840,72 +840,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index 198ced9d6e..23f33641c5 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index f95ffdbf28..1d91086baf 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -838,72 +838,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 63eeeaa988..488a816a1c 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 06192db506..745eef0e61 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -829,72 +829,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 68af2824d4..6b5d2377ce 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -528,6 +528,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 9b0fdd0ead..6319a44a52 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 7786c5eacb..53bd514bc7 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 827d7e6739..ee6e68d2ba 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 7a235f338c..4f84b61991 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 7ee6de9fb4..8b703d0cbf 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index fe71a04a4b..7044c4f3c0 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -816,72 +816,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 02a00778b7..c0d0fd3344 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 51c5acb53e..a90e9bde5e 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -829,72 +829,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 0db2836a1d..7cf3998756 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index eff8a4ab2d..80f2f675b9 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -816,72 +816,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 02a00778b7..c0d0fd3344 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 183d07f16e..f07dbd777c 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -827,72 +827,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index ed52188280..5014ec87ce 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 084e267136..c1131af198 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -838,72 +838,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index d9f5511fc9..04be986a9b 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 9114a9cabb..4a9e6ad4a6 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 7398e86cd8..3fe1ad0077 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 18134f02a0..58b8c93887 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -829,72 +829,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index ba85698c1f..544a902d42 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index 1ed070a2cb..fe2a11c799 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -847,72 +847,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 728fdccce2..bffa39f5fb 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index 4387cb7dd2..a857ba8cff 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -838,72 +838,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index b76760495e..7a6898edd1 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 60a7896543..858e7acdda 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -832,72 +832,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index cb191e69ec..9d83e720cd 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index dc35f67387..005d37c398 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -832,72 +832,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index c3a3df2e77..e2fa33e62e 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 79956cd922..4563046fce 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -838,72 +838,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- #define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 8237bd67a7..2e522a4f92 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ #define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index fc58eb5db5..6ee802596a 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -523,6 +523,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index a2dbc91bd3..20b8de9666 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -837,72 +837,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index b8a39e8594..236b558af3 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index f96aceb199..c5e2281ee1 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -810,72 +810,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index ca71afd9dc..0afa0c9005 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index bebc6669b0..b53442d1f8 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -810,72 +810,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index 7b9388f959..ec8be7e1e6 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -820,72 +820,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 841caaad30..68fc6ad2be 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 1d0af2e040..393f537519 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -834,72 +834,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index d944a42ccf..d13a1a0f33 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index f1c8827314..2a14aa057a 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -911,72 +911,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 4b8fa79130..f2f1abab30 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 4ad9878baf..bd7b0c71d5 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -857,73 +857,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
-
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index a1ce10b561..06697ae4f9 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -528,6 +528,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index ee017eb999..6e23032a66 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -844,72 +844,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index a89436a711..13d34be030 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -528,6 +528,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 52977241f2..2bd10d91c7 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -811,72 +811,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- #define BLTOUCH_DELAY 200
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- #define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 8c3f351f05..ba24826da5 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ #define BLTOUCH_DELAY 200
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ #define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index e4e4932769..9813957f05 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -811,72 +811,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- #define BLTOUCH_DELAY 200
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- #define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index 4c3d1fb9fc..77ab799829 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ #define BLTOUCH_DELAY 200
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ #define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 8de0a2dcb2..973bbc145b 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -843,72 +843,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index a016c8f317..111a37527e 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -828,9 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- //#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
-#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index ffb52c2ecb..47f355c89e 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -835,72 +835,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 75a12a4f21..637dc90e5e 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 86ab601ae1..159aea681a 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -848,72 +848,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 84344b89bb..110687f3ee 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -848,72 +848,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index c880f60fa8..6e105a1859 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 25c3e596a0..24bd6dec72 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 4cc311fa68..37f0dd81d9 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 25c3e596a0..24bd6dec72 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 96d355da76..a2d002baec 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -832,72 +832,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 24f6583edc..3aca50f504 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 9067d6f5de..84286b7ee7 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -840,72 +840,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index e2fe3b82fc..5b9214622f 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index a7665b5f71..8c0672b889 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -848,72 +848,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index eecc6e9651..9a80ce8f71 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index bd232317cf..3c48103428 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -848,72 +848,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index c70ebe90dc..5ef26d1eba 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 16dc0a3ea0..4f1db1c15a 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -827,72 +827,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 5f5b06ea6f..8eda23210d 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index a2ccf4fbdc..dea50b5504 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -832,72 +832,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index fd78065ee8..3d11f711ef 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -832,72 +832,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index ec09312abc..7c5c1ca85f 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 0d851cd57c..0ebf3fb8aa 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -829,72 +829,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index f23b308920..26a98be844 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index b14e693290..db5fc297b9 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 662a0d8d3a..5a7997b2fb 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 1edb64ec41..ae5dd7d1df 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -836,72 +836,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index e8a53840bd..f57848c277 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index c900c72dc3..b8e60c8688 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 46225f3e8d..15d3ed1f81 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -868,72 +868,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 192501bef5..9d83db658e 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 8ea8463e75..29dce6f9d2 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -826,72 +826,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index cabe70a7d9..7d93b40490 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index 81219d09af..9bc674c281 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -841,72 +841,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index 6c372f6a01..88d030c1ed 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index e194af9df9..b237ce8b07 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 45b7ac9706..d23ab4af14 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 858169b660..03d80f6177 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -830,72 +830,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 1cfc9db2bd..ba63e506f8 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 5ed1150cfb..1a7276a7f1 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -830,72 +830,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index 1cf2a61e67..c87e2c7005 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -859,72 +859,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 870f38b1bf..538a7ce25e 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 7cca46a694..fd84149ed8 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index be9897bbfe..0fcea22a24 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 4314f84131..0e2900b327 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -879,72 +879,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index a5897f54ba..884ed395ae 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 5c1bd2848b..20bda64b17 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 38ba1ceec7..d939ade6d1 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index f0cb8264e0..5527d3091c 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index d037e0a223..b94a1810e9 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -849,72 +849,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 5bd667b00d..c6f0cfb22a 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 555cc1b466..3c2b6fb5bf 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -827,72 +827,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 21181933a6..0cc4f8a618 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -839,72 +839,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index ce05be362d..2b43089545 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 67e555ef13..901a64bfca 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index ebebd94a56..557b10fa38 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index ae2350c9bf..2db889e01f 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index ba2668dfb1..3c4c02821b 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -837,72 +837,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index 929f7d3a20..27276c31a8 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 4de39be6cc..9db1ccd9c9 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -857,72 +857,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index 4f1ead851e..62c0f9208a 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -537,6 +537,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index f5a5a0a277..ae95f54c2e 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 9806fd8d28..06c956c67e 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 5eaa175fb9..f75f207c72 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 00430b6f7a..df74b08b7f 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -847,72 +847,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 6479b6c715..0ade33dba4 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 91542ab896..fc8b47d54a 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -838,72 +838,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 0348e7eabf..c098a182e1 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index cc5538cfad..d054246de4 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -828,72 +828,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index c37f7b3f86..b9318f5298 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -964,72 +964,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 8a5631d616..b2ab1c9e8b 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index efb572b617..6d21f025b8 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -910,72 +910,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index e5930d4d09..0a1f394ee8 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index ff0f9fedcf..0d648a1e99 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -910,72 +910,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index e5930d4d09..0a1f394ee8 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index e0f14e4970..ecd3f24c6e 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -910,72 +910,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 51366ab457..c16cccf51a 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index f33b759438..37d21e6bf4 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -900,72 +900,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 51366ab457..c16cccf51a 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 9d1ca4b879..f942c3cdc8 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -915,72 +915,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 0a1e637cfd..f1a065de3b 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -900,72 +900,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 9a79048ca7..2e7c675ad5 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index ed9c4794d3..5b8f228944 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -904,9 +904,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- #define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
-#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index a64cb6d9df..301027944d 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ #define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 7d8ac8b7dc..b8151d4c29 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -900,72 +900,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 51366ab457..c16cccf51a 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index a0bd3f4837..075eecd973 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -900,72 +900,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 7cd0f34eb2..8e0aa39146 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 9ff612e3d1..8490c2fd08 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -893,72 +893,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 98bbb578db..ce240d02b0 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -903,72 +903,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 9fc842d529..cf1622c8ea 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 4d8243abb9..a6fc8700f8 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -841,9 +841,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
#define BLTOUCH
-#if ENABLED(BLTOUCH)
- #define BLTOUCH_DELAY 500 // (ms) Enable and increase if needed
-#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 8ecf7f8838..f17c1c8391 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 3024b8a44a..4de7ede07b 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -831,72 +831,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index b543695516..95f2b7b670 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 091376d947..369bc51d45 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -823,72 +823,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 8ef697e220..c0178785e7 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index b9eb515908..f94d34856b 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -833,72 +833,6 @@
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
//#define BLTOUCH
-#if ENABLED(BLTOUCH)
- /**
- * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
- * Do not activate settings that the probe might not understand. Clones might misunderstand
- * advanced commands.
- *
- * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
- * check the wiring of the BROWN, RED and ORANGE wires.
- *
- * Note: If the trigger signal of your probe is not being recognized, it has been very often
- * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
- * like they would be with a real switch. So please check the wiring first.
- *
- * Settings for all BLTouch and clone probes:
- */
-
- // Safety: The probe needs time to recognize the command.
- // Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
-
- /**
- * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
- */
-
- // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
- // in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
-
- /**
- * Settings for BLTouch Smart 3.0 and 3.1
- * Summary:
- * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
- * - High-Speed mode
- * - Disable LCD voltage options
- */
-
- /**
- * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
- * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
- * If disabled, OD mode is the hard-coded default on 3.0
- * On startup, Marlin will compare its eeprom to this vale. If the selected mode
- * differs, a mode set eeprom write will be completed at initialization.
- * Use the option below to force an eeprom write to a V3.1 probe regardless.
- */
- //#define BLTOUCH_SET_5V_MODE
-
- /**
- * Safety: Activate if connecting a probe with an unknown voltage mode.
- * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
- * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
- * To preserve the life of the probe, use this once then turn it off and re-flash.
- */
- //#define BLTOUCH_FORCE_MODE_SET
-
- /**
- * Use "HIGH SPEED" mode for probing.
- * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
- * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
- * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
- */
- //#define BLTOUCH_HS_MODE
-
- // Safety: Enable voltage mode settings in the LCD menu.
- //#define BLTOUCH_LCD_VOLTAGE_MENU
-
-#endif // BLTOUCH
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
//#define SOLENOID_PROBE
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index c6b1912d7b..396e9424d4 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -524,6 +524,73 @@
// Enable this if X or Y can't home without homing the other axis first.
//#define CODEPENDENT_XY_HOMING
+#if ENABLED(BLTOUCH)
+ /**
+ * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+ * Do not activate settings that the probe might not understand. Clones might misunderstand
+ * advanced commands.
+ *
+ * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+ * check the wiring of the BROWN, RED and ORANGE wires.
+ *
+ * Note: If the trigger signal of your probe is not being recognized, it has been very often
+ * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+ * like they would be with a real switch. So please check the wiring first.
+ *
+ * Settings for all BLTouch and clone probes:
+ */
+
+ // Safety: The probe needs time to recognize the command.
+ // Minimum command delay (ms). Enable and increase if needed.
+ //#define BLTOUCH_DELAY 500
+
+ /**
+ * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+ */
+
+ // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+ // in special cases, like noisy or filtered input configurations.
+ //#define BLTOUCH_FORCE_SW_MODE
+
+ /**
+ * Settings for BLTouch Smart 3.0 and 3.1
+ * Summary:
+ * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+ * - High-Speed mode
+ * - Disable LCD voltage options
+ */
+
+ /**
+ * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+ * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+ * If disabled, OD mode is the hard-coded default on 3.0
+ * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+ * differs, a mode set eeprom write will be completed at initialization.
+ * Use the option below to force an eeprom write to a V3.1 probe regardless.
+ */
+ //#define BLTOUCH_SET_5V_MODE
+
+ /**
+ * Safety: Activate if connecting a probe with an unknown voltage mode.
+ * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+ * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+ * To preserve the life of the probe, use this once then turn it off and re-flash.
+ */
+ //#define BLTOUCH_FORCE_MODE_SET
+
+ /**
+ * Use "HIGH SPEED" mode for probing.
+ * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+ * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+ * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+ */
+ //#define BLTOUCH_HS_MODE
+
+ // Safety: Enable voltage mode settings in the LCD menu.
+ //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
/**
* Z Steppers Auto-Alignment
* Add the G34 command to align multiple Z steppers using a bed probe.
--
GitLab