diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index b7f8f4f1df414e9470343388cb686647ebe2b579..61712921fd14199c81ce3043ee94ae5fa8b5265c 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h index 3d00134fb0d359aca6bad10dc70c0dbc564c04d2..2ffe574181add779b55d0f16fb45cc4320efed4e 100644 --- a/Marlin/configurator/config/Configuration.h +++ b/Marlin/configurator/config/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 0d1eb86460d44dc35d6778661dfbd53b3799e109..eda6e5e01eba9e5d4b6f8fdeebea86b4fc36ba34 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index d91caae685fccd313c202330eb4ce9c2985c75cb..160e844267bcbcb79cc28802574e6548970b86ff 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -167,11 +167,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 10950b27bc9d3cffc6f085e6a185a6ae74d61117..b86df6aff70a514c23edbdb8b535a11967419d85 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -181,11 +181,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 260 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 4c79570badc1d6cc4f5ac732d24e935af5428617..ba61cb52b152a67e7c66ac0d7572bad3ac054d00 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -183,11 +183,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index df92706ecee3a2a0a2e4b4a419f6a300c679f16e..7524af5cfd1d6a79e1439a8375fdacd36c69659e 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 8ec53268cfe9f53f85d181fa7ca4925c17d4234e..bcbc7219b9a3537929bb2f1ae81eebf981a102c2 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 1cd260009380aff888d32bbf330d2d10e170effd..957568d4ce8ef47be372f3f853da471da614b1c0 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -203,11 +203,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS #define EXTRUDER_WATTS (2*2/5.9) // P=I^2/R #define BED_WATTS (5.45*5.45/2.2) // P=I^2/R diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 55ce81c14ad85c72b79274ef8f89d8c2220d9dd6..b216277aae2c0c2fc1ce21e72d8c4bfc18a1fa02 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 250 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 03a06cd398abc2ae10be9bd05b4cac04a7f43287..9b7859348d93142d73e9050d3627f57c35f32295 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -181,11 +181,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 260 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index d166fa72b045a2a662d297faab50e00d0f1d7dde..72f4396210260747f00442331edd070061496d83 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index a7a5e34c2d1c575cb8e8909f1e89001a756869e5..509dc971d92904e12efdc9c7f0aeb2777423ab77 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 6c57a1be7097c7da343989f859adb92e8c7fbf68..f38a63b17110af4739e701cd74b2a6035e54945a 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 68cf825628165b31dd33923abd2a755eb60e4409..6d017494a434a7710dc4bbf45d148a3b098f3b4b 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 4a3800cbc5f8a100dffcf4609807d9062098c47e..c8077ad1cb797d25754e6df1d9f20623d9eaece6 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -182,11 +182,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 5d99544d8772eda8f5c09b0ae529e98a8ea156f2..080abb2c5f5b1237fc112101be05fdd7399b0436 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 9091073611140c6fafed265b997d970fc3ea48dd..80cf1d1a405f8e4c0f515e98a53ea9c5e45bca07 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -178,11 +178,6 @@ Here are some standard links for getting your machine calibrated: #define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 -// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the -// average current. The value should be an integer and the heat bed will be turned on for 1 interval of -// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. -//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 - // If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS //#define EXTRUDER_WATTS (12.0*12.0/6.7) // P=I^2/R //#define BED_WATTS (12.0*12.0/1.1) // P=I^2/R