diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 38582141205ffc070113c283e3b6ce3416ad5cb8..90664fcaf02375c050352055e862b95775694feb 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index 6859e95e58d0061fdbba284349bda05e8e0465c8..38f40192c566a4087abd8eccd1169464daa3cd91 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index 198a552190f805b27f57b6c4edc7cc308c6b9843..2ff2417f30bb7244693a2154de735614f6d4231e 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index 949d6135d68d5d77f9f1c3a15c1b187c51e0e275..5d21f665658f8c0587cf6c7e5e245445a3cc8f9d 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index cc18bffaa80695c52940c22eef546c27f76439ec..1c6c83ff4720399bdcb3204a99bfb627737ab416 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index 38d1b8776b9dcc0059322b92b50bc1a0c9a3a0ee..be1623c75d777ed743b38297e80b105d25eeb4a2 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index f1d8f92366165447d4779650437245e6acb785fa..73ed71160424462f66fbf818fd3b733ce3105930 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index cb724a8ccb78b7c92b7ea5a87b235947ce581fc6..75eec514622f33e81ecda8355b656ee29b78bef7 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -1831,8 +1831,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index e8ba2bad5a314af5125a0f7711bbd586f98f0d22..81f4c15c85e81beedb36e72d098f5269b13babcd 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 8c93058deb701c23a08a7e0931fa1535076905ac..4ae3e34cb277fbd9fb02b1b0a945d622008f1a45 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 4f07e88ea71a3050511fe01e3d22b7f2190cb214..7092f7b0037f108ef5aea6212238933d59ea47ef 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index a99596ca3e706e0dac9c62c4099c4e183d45f371..b7da1d42aee662ddee62977d8ddb8f572317e9e6 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1847,8 +1847,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index a49b68c4cad987bfce72ddc9bb090d698a432016..9809839350658af998d30d49a683dcb3b4560494 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1849,8 +1849,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 66ffda7c852912eaf7896046a3e465f86309a43b..ea0c9bc2f4cb27be17d5ff202fc97f549a6018f9 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1849,8 +1849,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index 965bebdf79b685f926796feb84ef0b75fdafb729..19cd4d0227cf7bd44355489768aaac2e6722cc59 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index 361ff5424f0b97abeaa9bb1c503c09b175e10bec..16d8f39a63380ce157dc1d5b890830e4b230c7a3 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index f3a9652ca0329737d58eddc4fc7908dee0c5f33e..d4c6048df24659d47d01c2a874efad6404b5b828 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 556d06fa85c0b58d795336e4e85693aa3a1752d1..1212d3585817ee4a29bc7b043bb7361556f3166d 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 965bebdf79b685f926796feb84ef0b75fdafb729..19cd4d0227cf7bd44355489768aaac2e6722cc59 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 965bebdf79b685f926796feb84ef0b75fdafb729..19cd4d0227cf7bd44355489768aaac2e6722cc59 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h
index f45a6c34b9a13e58cacbd417fbd99f9e004fd5b6..a7cada0f02ab7218e4350310a84771c566d700ca 100644
--- a/config/examples/HMS434/Configuration_adv.h
+++ b/config/examples/HMS434/Configuration_adv.h
@@ -1781,8 +1781,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index bfc94bd430b86096d1719e141a6e87ab07872680..bbc4dc31db8179d6f4b6ffcc4dd63ff220d30aec 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index 2e808e2714ad9e22c2204e3723599a71c6427081..a60e234cda130c70ff6df2bc4b1ddaf24cf0453f 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -1850,8 +1850,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index 96e3a80283bb05773e821853a3bb6d9cc7eed1a1..a30d197176add0fa295ea2fb627bbdf7936b71c3 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index 2e808e2714ad9e22c2204e3723599a71c6427081..a60e234cda130c70ff6df2bc4b1ddaf24cf0453f 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -1850,8 +1850,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index 91e93c2a296b3d001fa383b0bdc3210b5db195b3..51e0b427b7790296d765138b5fc7359ae6e85a26 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 20ab146c3942cea8a103dea3288e37bc23da0e32..534658fe11ff28a34a69b6439d35aa7d77f2e023 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index cebba09ee25cade04e4ff844480a7f4124f2be55..3e8eac8bc0a34e4c1350ebba84984b91544a7772 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index b0c165028d297bceb0161a4c2a801cad1e38466b..114c5a0d07b90dca3c34ec97e979d0e48fc0d431 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 91662aa1cfc000ef0976f05418e9170afb4952eb..b1e9c36f2b6ef9b3418b9a39946e8c3aa3d9a357 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 77741ebec962cb8a465598edf67c930bec61550e..aa4b0d6a6c2f7e7722c7a5442b178214e9bd848c 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1846,8 +1846,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index 841588636eb39a7e3e6db2fa80cf36d03beaa21c..7241b635032f2d5b2d62832c5abb0d0477087449 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index 2ca3529945d42255927eb488c00de0b3f13f9210..c1ee7ffe31b40bb60bf21696057c9edd3bcd115c 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index f2aace7fd51ab6a83f1b4e63f6238431de606d0d..3e33266cedb39579bd5da8bb0db94dfae2a6014d 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 8fe1cb3601478be40187da1592cc2bede2658d1f..d149feab61ad24d6043dbe74670288ccd93eb23b 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index eaea230f2fa1c480ec10422b6c8b0229b5f1c723..0a684a61b5cd65bd364c6af8aa970a5148d68da8 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 034559a7f5be8393cd3b6f9f0265add3814bcc96..82291f2e869a69497552b9423ff398ab8fb801fb 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index 1a45b9b462d9b242b3635841f1e5fd9bf984e0cb..7a96435842f07dfe6811c1d59c05679e0f123ae6 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
@@ -1841,8 +1841,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 0b90d47508938bdf348cf9fe9291e6e4c3a2e4fc..2019684e36dc86cdfbc7f9711069a09f14ac6192 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 0b90d47508938bdf348cf9fe9291e6e4c3a2e4fc..2019684e36dc86cdfbc7f9711069a09f14ac6192 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
@@ -1844,8 +1844,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index 7098b36e2ab01e77f1f5269dce591a05aaa9d6f7..bacca20e0d69b7978b6876f71db4623e4a65d454 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index 1ae4ccd45cdddafabee8196103ed5601fea21eab..391affccb3199e96b3e2c91eb8e4be7777652d21 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 5c5e4846097a1dad9e7a19183eef198078482722..2bc98c09673fc8d2a48e2aabd9b943cf4e6fe488 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index e7636ddaf670b958854bb4cbe61f7f739ea2e6db..e6e95111cc11ef5d06d720238dae8efba61cad85 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index 63c642262e5772e765203924fec704942d8c4f52..bd3a6bd0b622ef519bccba3f7cdacc69a0c68838 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 28798fcef1085410cf4a8e993074fea110c5c11e..b9e11d7ee92617969bfe59b648646bc71d97ec25 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index c6bc606c4821f1b0357da5f940b4e34b779b8c36..cc71cc3c1a9b88b9dff5513b9dad38edbdbb1c41 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index c7d6b2d9b710864a2a23e3bee6aae17c167ec581..b7a4c0a2441662a65c7040b5ae093686410acf2c 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1858,8 +1858,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 7a314121dc7221a4d8a0dd7ae07a298c3d878756..ba7e96a4c5afde48c0ddaebcd9059077b7d5caa6 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index 18e3cafa28e60dbdb0b16e847cb589e57819fa7e..cafa69004bf04c33457450bb097356111dae30d6 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index ddc318dc6cd1a550fb9ce90872e5afd21b89f3b6..2f89b60a4bf08d5d03d383039165fc2452811dfa 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -1847,8 +1847,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index da26cd85b156b951d3e6d1d7f3b5ec4b068bf8a1..bcb228c5dda839e3e13046f11a6643f3028e235f 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index aca7a2e57b03baa2cc046e1351d7c08f9478efd3..82c9e3c87c96088c0fd84ca16244f0eb8fae97bf 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index ee98a6b086754ba2a6634c90826d859f30a87606..e95d1c63afc466beb21422d975d783a766431927 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index 6a7e7b02e2f49fb3cc442fce4a1937c7493e4748..b0f98bf543822106606589c4765e8015e3514e94 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1845,8 +1845,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 6cbf579c7f8587c730bd9ef5a9042402cc6d436f..293ca3288c6b033fa77aff7a7984e282001f6663 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -1846,8 +1846,6 @@
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
- //#define TMC_USE_CHAIN // All active xx_CS_PIN defines must be set the same to use SPI daisy chain
-
/**
* Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
* Set the address using jumpers on pins MS1 and MS2.