From 8ebf0b92be973e0436e9bdce3163b9dd838beff2 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Thu, 30 Jul 2015 23:19:47 -0700
Subject: [PATCH] Spacing adjustments in some pins files
---
Marlin/pins_AZTEEG_X3.h | 4 ++--
Marlin/pins_ELEFU_3.h | 22 +++++++++++-----------
Marlin/pins_MINIRAMBO.h | 4 +++-
Marlin/pins_RAMBO.h | 4 +++-
Marlin/pins_TEENSYLU.h | 4 ++--
5 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h
index deca1b59ed..0409d6bd2d 100644
--- a/Marlin/pins_AZTEEG_X3.h
+++ b/Marlin/pins_AZTEEG_X3.h
@@ -24,8 +24,8 @@
#define SDCARDDETECT -1 // Pin 49 if using display sd interface
#if ENABLED(TEMP_STAT_LEDS)
- #define STAT_LED_RED 64
- #define STAT_LED_BLUE 63
+ #define STAT_LED_RED 64
+ #define STAT_LED_BLUE 63
#endif
#elif ENABLED(TEMP_STAT_LEDS)
diff --git a/Marlin/pins_ELEFU_3.h b/Marlin/pins_ELEFU_3.h
index 20e6f2de63..f581f287c7 100644
--- a/Marlin/pins_ELEFU_3.h
+++ b/Marlin/pins_ELEFU_3.h
@@ -13,14 +13,14 @@
#define X_MAX_PIN 34
#define Y_STEP_PIN 11
-#define Y_DIR_PIN 9
+#define Y_DIR_PIN 9
#define Y_ENABLE_PIN 12
#define Y_MIN_PIN 33
#define Y_MAX_PIN 32
-#define Z_STEP_PIN 7
-#define Z_DIR_PIN 6
-#define Z_ENABLE_PIN 8
+#define Z_STEP_PIN 7
+#define Z_DIR_PIN 6
+#define Z_ENABLE_PIN 8
#define Z_MIN_PIN 31
#define Z_MAX_PIN 30
@@ -48,10 +48,10 @@
#define HEATER_1_PIN 46 //12V PWM2
#define HEATER_2_PIN 17 //12V PWM3
#define HEATER_BED_PIN 44 //DOUBLE 12V PWM
-#define TEMP_0_PIN 3 //ANALOG NUMBERING
-#define TEMP_1_PIN 2 //ANALOG NUMBERING
-#define TEMP_2_PIN 1 //ANALOG NUMBERING
-#define TEMP_BED_PIN 0 //ANALOG NUMBERING
+#define TEMP_0_PIN 3 //ANALOG NUMBERING
+#define TEMP_1_PIN 2 //ANALOG NUMBERING
+#define TEMP_2_PIN 1 //ANALOG NUMBERING
+#define TEMP_BED_PIN 0 //ANALOG NUMBERING
#define BEEPER_PIN 36
@@ -70,9 +70,9 @@
#define BTN_EN2 39
#define BTN_ENC 15 //the click
- #define BLEN_C 2
- #define BLEN_B 1
- #define BLEN_A 0
+ #define BLEN_C 2
+ #define BLEN_B 1
+ #define BLEN_A 0
#endif // RA_CONTROL_PANEL
diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h
index bfc77c9fea..efdac8faf7 100644
--- a/Marlin/pins_MINIRAMBO.h
+++ b/Marlin/pins_MINIRAMBO.h
@@ -89,7 +89,9 @@
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD)
+
#define KILL_PIN 32
+
#if ENABLED(NEWPANEL)
#define BEEPER_PIN 84 // Beeper on AUX-4
@@ -107,5 +109,5 @@
#define SDCARDDETECT 15
- #endif
+ #endif //NEWPANEL
#endif //ULTRA_LCD
diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h
index 6510230429..57b7a68413 100644
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@@ -110,7 +110,9 @@
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#if ENABLED(ULTRA_LCD)
+
#define KILL_PIN 80
+
#if ENABLED(NEWPANEL)
#define BEEPER_PIN 79 // Beeper on AUX-4
@@ -138,7 +140,7 @@
#define BEEPER_PIN 33 // No Beeper added
//buttons are attached to a shift register
- // Not wired this yet
+ // Not wired yet
// #define SHIFT_CLK 38
// #define SHIFT_LD 42
// #define SHIFT_OUT 40
diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h
index 997ca3c97f..f0ed90c375 100644
--- a/Marlin/pins_TEENSYLU.h
+++ b/Marlin/pins_TEENSYLU.h
@@ -68,7 +68,6 @@
#endif
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
- //LCD Pins
#define BEEPER_PIN -1
@@ -78,7 +77,8 @@
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43
#define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping)
#endif // LCD_I2C_PANELOLU2
- //not connected to a pin
+
#define SDCARDDETECT -1
+
#endif // ULTRA_LCD && NEWPANEL
--
GitLab