diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 78a314d48ceeb69a2f77b7e904411afe38540361..58ada8c5d89b6b1102a822958af5501f6de7d8bf 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -294,6 +294,8 @@ #define BOARD_STEVAL 4206 // STEVAL-3DP001V1 3D PRINTER BOARD #define BOARD_BIGTREE_SKR_PRO_V1_1 4207 // BigTreeTech SKR Pro v1.1 (STM32F407ZG) #define BOARD_BIGTREE_BTT002_V1_0 4208 // BigTreeTech BTT002 v1.0 (STM32F407VE) +#define BOARD_LERDGE_K 4209 // Lerdge K (STM32F407VE) +#define BOARD_LERDGE_X 4210 // Lerdge X (STM32F407VE) // // ARM Cortex M7 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 34f1ffb8d2b3a9f9ba4b62094a0d527d061e7d28..4058c72836c09b84be440cb3456eddc4d8ba2900 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -508,6 +508,10 @@ #include "stm32/pins_BIGTREE_SKR_PRO_V1.1.h" // STM32F4 env:BIGTREE_SKR_PRO #elif MB(BIGTREE_BTT002_V1_0) #include "stm32/pins_BIGTREE_BTT002_V1.0.h" // STM32F4 env:BIGTREE_BTT002 +#elif MB(LERDGE_K) + #include "stm32/pins_LERDGE_K.h" // STM32F4 env:STM32F4 +#elif MB(LERDGE_X) + #include "stm32/pins_LERDGE_X.h" // STM32F4 env:STM32F4 // // ARM Cortex M7 diff --git a/Marlin/src/pins/stm32/pins_LERDGE_K.h b/Marlin/src/pins/stm32/pins_LERDGE_K.h new file mode 100644 index 0000000000000000000000000000000000000000..2017b5f4d6db2f5599256ee3e17bd0c70e71469f --- /dev/null +++ b/Marlin/src/pins/stm32/pins_LERDGE_K.h @@ -0,0 +1,184 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if !defined(STM32F4) && !defined(STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "LERDGE K supports up to 2 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "Lerdge K" +#define DEFAULT_MACHINE_NAME "LERDGE" + +#define I2C_EEPROM + +// Ignore temp readings during develpment. +//#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + +// +// Servos +// +//#define SERVO0_PIN PD12 + +// +// Limit Switches +// +#define X_STOP_PIN PG3 +#define Y_STOP_PIN PG4 +#define Z_STOP_PIN PG5 + +// +// Z Probe (when not Z_MIN_PIN) +// +//#ifndef Z_MIN_PROBE_PIN +// #define Z_MIN_PROBE_PIN PB15 +//#endif + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PE6 +#define FIL_RUNOUT2_PIN PE7 + +// +// Steppers +// +#define X_STEP_PIN PG1 +#define X_DIR_PIN PB10 +#define X_ENABLE_PIN PG0 +//#ifndef X_CS_PIN +// #define X_CS_PIN PE0 +//#endif + +#define Y_STEP_PIN PF14 +#define Y_DIR_PIN PF15 +#define Y_ENABLE_PIN PF13 +//#ifndef Y_CS_PIN +// #define Y_CS_PIN PE1 +//#endif + +#define Z_STEP_PIN PF11 +#define Z_DIR_PIN PF12 +#define Z_ENABLE_PIN PC5 +//#ifndef Z_CS_PIN +// #define Z_CS_PIN PE2 +//#endif + +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 +//#ifndef E0_CS_PIN +// #define E0_CS_PIN PE3 +//#endif + +#define E1_STEP_PIN PF1 +#define E1_DIR_PIN PF0 +#define E1_ENABLE_PIN PF2 +//#ifndef E1_CS_PIN +// #define E1_CS_PIN PE4 +//#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC1 // Analog Input +#define TEMP_1_PIN PC2 // Analog Input +#define TEMP_BED_PIN PC0 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN PA0 +#define HEATER_BED_PIN PA2 + +#ifndef FAN_PIN + #define FAN_PIN PC15 +#endif +#define FAN1_PIN PF6 +#define FAN2_PIN PF7 + +#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN + +// +// LED / Lighting +// +//#define CASE_LIGHT_PIN_CI -1 +//#define CASE_LIGHT_PIN_DO -1 +//#define NEOPIXEL_PIN -1 + +// +// Prusa i3 MK2 Multi-Material Multiplexer Support +// +//#define E_MUX0_PIN -1 +//#define E_MUX1_PIN -1 + +// +// SD support +// +#define SDIO_SUPPORT + +// +// Misc. Functions +// +#define SDSS PC11 +#define LED_PIN PC7 // Alive +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT + +#define SCK_PIN PC12 +#define MISO_PIN PC8 +#define MOSI_PIN PD2 +#define SS_PIN PC11 + +// +// LCD / Controller +// + +// TODO: Replace these with the correct FSMC pins, once known +#define SD_DETECT_PIN -1 +#define BEEPER_PIN PD12 +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 +#define LCD_PINS_D4 -1 +#define LCD_PINS_D5 -1 +#define LCD_PINS_D6 -1 +#define LCD_PINS_D7 -1 + +#define BTN_EN1 PE3 +#define BTN_EN2 PE4 +#define BTN_ENC PE2 + +// +// ST7920 Delays +// +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(715) +#endif diff --git a/Marlin/src/pins/stm32/pins_LERDGE_X.h b/Marlin/src/pins/stm32/pins_LERDGE_X.h new file mode 100644 index 0000000000000000000000000000000000000000..284def06a9da61deac4218df25cedebabcacde08 --- /dev/null +++ b/Marlin/src/pins/stm32/pins_LERDGE_X.h @@ -0,0 +1,181 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#pragma once + +#if !defined(STM32F4) && !defined(STM32F4xx) + #error "Oops! Select an STM32F4 board in 'Tools > Board.'" +#elif HOTENDS > 2 || E_STEPPERS > 2 + #error "LERDGE X supports up to 2 hotends / E-steppers." +#endif + +#define BOARD_INFO_NAME "Lerdge X" +#define DEFAULT_MACHINE_NAME "LERDGE" + +//#define I2C_EEPROM + +// +// Servos +// +//#define SERVO0_PIN PD12 +//#define SERVO1_PIN -1 + +// +// Limit Switches +// +#define X_STOP_PIN PB12 +#define Y_STOP_PIN PB13 +#define Z_STOP_PIN PB14 + +// +// Filament runout +// +#define FIL_RUNOUT_PIN PE1 + +// +// Z Probe (when not Z_MIN_PIN) +// +//#ifndef Z_MIN_PROBE_PIN +// #define Z_MIN_PROBE_PIN PB15 +//#endif + +// +// Steppers +// +#define X_STEP_PIN PB10 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PB11 +//#ifndef X_CS_PIN +// #define X_CS_PIN PD1 +//#endif + +#define Y_STEP_PIN PB0 +#define Y_DIR_PIN PC5 +#define Y_ENABLE_PIN PB1 +//#ifndef Y_CS_PIN +// #define Y_CS_PIN PE12 +//#endif + +#define Z_STEP_PIN PA7 +#define Z_DIR_PIN PA6 +#define Z_ENABLE_PIN PC4 +//#ifndef Z_CS_PIN +// #define Z_CS_PIN PD5 +//#endif + +#define E0_STEP_PIN PA4 +#define E0_DIR_PIN PA3 +#define E0_ENABLE_PIN PA5 +//#ifndef E0_CS_PIN +// #define E0_CS_PIN PB4 +//#endif + +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 +//#ifndef E1_CS_PIN +// #define E1_CS_PIN PE5 +//#endif + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_BED_PIN PC1 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN -1 +#define HEATER_BED_PIN PA2 + +#ifndef FAN_PIN +// #define FAN_PIN PC15 +#endif +#define FAN1_PIN PC15 +#define FAN2_PIN PA0 + +#define ORIG_E0_AUTO_FAN_PIN PC15 // Use this by NOT overriding E0_AUTO_FAN_PIN + +// +// Prusa i3 MK2 Multi Material Multiplexer Support +// +//#define E_MUX0_PIN -1 +//#define E_MUX1_PIN -1 + +// +// LED / Lighting +// +//#define CASE_LIGHT_PIN_CI -1 +//#define CASE_LIGHT_PIN_DO -1 +//#define NEOPIXEL_PIN -1 + +// +// Misc. Functions +// +#define SDSS PC11 +#define LED_PIN PC7 // Alive +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT + +#define SCK_PIN PC12 +#define MISO_PIN PC8 +#define MOSI_PIN PD2 +#define SS_PIN PC11 + +// +// SD support +// +#define SDIO_SUPPORT + +// +// LCD / Controller +// + +// The LCD is initialized in FSMC mode +#define SD_DETECT_PIN -1 +#define BEEPER_PIN PD12 + +#define BTN_EN1 PE3 +#define BTN_EN2 PE4 +#define BTN_ENC PE2 + +#define LCD_RESET_PIN PD6 +#define LCD_BACKLIGHT_PIN PD3 +#define FSMC_CS_PIN PD4 +#define FSMC_RS_PIN PD11 +#define TOUCH_CS PB6 + +// +// ST7920 Delays +// +#ifndef ST7920_DELAY_1 + #define ST7920_DELAY_1 DELAY_NS(96) +#endif +#ifndef ST7920_DELAY_2 + #define ST7920_DELAY_2 DELAY_NS(48) +#endif +#ifndef ST7920_DELAY_3 + #define ST7920_DELAY_3 DELAY_NS(715) +#endif