From 888443ca1eaf3427408a1337e5fa8d4548c64dd1 Mon Sep 17 00:00:00 2001
From: esenapaj <esenapaj@users.noreply.github.com>
Date: Fri, 13 May 2016 21:10:23 +0900
Subject: [PATCH] Enclose all #error strings with apostrophes
---
Marlin/Conditionals.h | 8 +-
Marlin/Marlin.h | 2 +-
Marlin/MarlinSerial.h | 2 +-
Marlin/Marlin_main.cpp | 4 +-
Marlin/SanityCheck.h | 208 ++++++++++++++++-----------------
Marlin/Sd2Card.cpp | 2 +-
Marlin/Sd2PinMap.h | 2 +-
Marlin/fastio.h | 2 +-
Marlin/pins.h | 2 +-
Marlin/pins_5DPRINT.h | 2 +-
Marlin/pins_A4JP.h | 2 +-
Marlin/pins_BQ_ZUM_MEGA_3D.h | 2 +-
Marlin/pins_BRAINWAVE.h | 2 +-
Marlin/pins_BRAINWAVE_PRO.h | 4 +-
Marlin/pins_CHEAPTRONIC.h | 2 +-
Marlin/pins_ELEFU_3.h | 2 +-
Marlin/pins_GEN3_MONOLITHIC.h | 2 +-
Marlin/pins_GEN3_PLUS.h | 2 +-
Marlin/pins_GEN6.h | 2 +-
Marlin/pins_GEN7_12.h | 2 +-
Marlin/pins_GEN7_14.h | 2 +-
Marlin/pins_GEN7_CUSTOM.h | 2 +-
Marlin/pins_LEAPFROG.h | 2 +-
Marlin/pins_MEGACONTROLLER.h | 4 +-
Marlin/pins_MEGATRONICS.h | 2 +-
Marlin/pins_MEGATRONICS_2.h | 2 +-
Marlin/pins_MEGATRONICS_3.h | 2 +-
Marlin/pins_MINIRAMBO.h | 2 +-
Marlin/pins_MINITRONICS.h | 2 +-
Marlin/pins_OMCA.h | 2 +-
Marlin/pins_OMCA_A.h | 2 +-
Marlin/pins_PRINTRBOARD.h | 4 +-
Marlin/pins_PRINTRBOARD_REVF.h | 4 +-
Marlin/pins_RAMBO.h | 2 +-
Marlin/pins_RAMPS_14.h | 2 +-
Marlin/pins_RAMPS_OLD.h | 2 +-
Marlin/pins_RUMBA.h | 4 +-
Marlin/pins_SANGUINOLOLU_11.h | 2 +-
Marlin/pins_SAV_MKI.h | 2 +-
Marlin/pins_SETHI.h | 2 +-
Marlin/pins_TEENSY2.h | 4 +-
Marlin/pins_TEENSYLU.h | 4 +-
Marlin/pins_ULTIMAIN_2.h | 2 +-
Marlin/pins_ULTIMAKER.h | 2 +-
Marlin/pins_ULTIMAKER_OLD.h | 2 +-
Marlin/thermistortables.h | 10 +-
Marlin/utf_mapper.h | 10 +-
47 files changed, 169 insertions(+), 169 deletions(-)
diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h
index 41dcec76c3..c6048b25d8 100644
--- a/Marlin/Conditionals.h
+++ b/Marlin/Conditionals.h
@@ -478,7 +478,7 @@
#endif
#if TEMP_SENSOR_1 <= -2
- #error MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_1
+ #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_1"
#elif TEMP_SENSOR_1 == -1
#define HEATER_1_USES_AD595
#elif TEMP_SENSOR_1 == 0
@@ -490,7 +490,7 @@
#endif
#if TEMP_SENSOR_2 <= -2
- #error MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_2
+ #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_2"
#elif TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595
#elif TEMP_SENSOR_2 == 0
@@ -502,7 +502,7 @@
#endif
#if TEMP_SENSOR_3 <= -2
- #error MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_3
+ #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_3"
#elif TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#elif TEMP_SENSOR_3 == 0
@@ -514,7 +514,7 @@
#endif
#if TEMP_SENSOR_BED <= -2
- #error MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_BED
+ #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_BED"
#elif TEMP_SENSOR_BED == -1
#define BED_USES_AD595
#elif TEMP_SENSOR_BED == 0
diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h
index 1a4f04d072..1b19430cd9 100644
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@@ -45,7 +45,7 @@
#include "pins.h"
#ifndef SANITYCHECK_H
- #error Your Configuration.h and Configuration_adv.h files are outdated!
+ #error "Your Configuration.h and Configuration_adv.h files are outdated!"
#endif
#include "Arduino.h"
diff --git a/Marlin/MarlinSerial.h b/Marlin/MarlinSerial.h
index 6af14557e4..34d2346156 100644
--- a/Marlin/MarlinSerial.h
+++ b/Marlin/MarlinSerial.h
@@ -88,7 +88,7 @@
#define RX_BUFFER_SIZE 128
#endif
#if !((RX_BUFFER_SIZE == 256) ||(RX_BUFFER_SIZE == 128) ||(RX_BUFFER_SIZE == 64) ||(RX_BUFFER_SIZE == 32) ||(RX_BUFFER_SIZE == 16) ||(RX_BUFFER_SIZE == 8) ||(RX_BUFFER_SIZE == 4) ||(RX_BUFFER_SIZE == 2))
- #error RX_BUFFER_SIZE has to be a power of 2 and >= 2
+ #error "RX_BUFFER_SIZE has to be a power of 2 and >= 2"
#endif
struct ring_buffer {
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 99786e6170..966cfd5fc9 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -3953,10 +3953,10 @@ inline void gcode_M42() {
*/
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
#if !HAS_Z_MIN_PROBE_PIN
- #error You must define Z_MIN_PROBE_PIN to enable Z probe repeatability calculation.
+ #error "You must define Z_MIN_PROBE_PIN to enable Z probe repeatability calculation."
#endif
#elif !HAS_Z_MIN
- #error You must define Z_MIN_PIN to enable Z probe repeatability calculation.
+ #error "You must define Z_MIN_PIN to enable Z probe repeatability calculation."
#endif
/**
diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h
index c2b1890378..4f254cd0eb 100644
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@@ -35,49 +35,49 @@
* action to proceed with compilation in such environments.
*/
#if !defined(ARDUINO) || ARDUINO < 10600
- #error Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit.
+ #error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit."
#endif
/**
* Marlin release, version and default string
*/
#ifndef SHORT_BUILD_VERSION
- #error SHORT_BUILD_VERSION Information must be specified
+ #error "SHORT_BUILD_VERSION Information must be specified"
#endif
#ifndef DETAILED_BUILD_VERSION
- #error BUILD_VERSION Information must be specified
+ #error "BUILD_VERSION Information must be specified"
#endif
#ifndef STRING_DISTRIBUTION_DATE
- #error STRING_DISTRIBUTION_DATE Information must be specified
+ #error "STRING_DISTRIBUTION_DATE Information must be specified"
#endif
#ifndef PROTOCOL_VERSION
- #error PROTOCOL_VERSION Information must be specified
+ #error "PROTOCOL_VERSION Information must be specified"
#endif
#ifndef MACHINE_NAME
- #error MACHINE_NAME Information must be specified
+ #error "MACHINE_NAME Information must be specified"
#endif
#ifndef SOURCE_CODE_URL
- #error SOURCE_CODE_URL Information must be specified
+ #error "SOURCE_CODE_URL Information must be specified"
#endif
#ifndef DEFAULT_MACHINE_UUID
- #error DEFAULT_MACHINE_UUID Information must be specified
+ #error "DEFAULT_MACHINE_UUID Information must be specified"
#endif
#ifndef WEBSITE_URL
- #error WEBSITE_URL Information must be specified
+ #error "WEBSITE_URL Information must be specified"
#endif
/**
* Dual Stepper Drivers
*/
#if ENABLED(Z_DUAL_STEPPER_DRIVERS) && ENABLED(Y_DUAL_STEPPER_DRIVERS)
- #error You cannot have dual stepper drivers for both Y and Z.
+ #error "You cannot have dual stepper drivers for both Y and Z."
#endif
/**
@@ -85,13 +85,13 @@
*/
#if ENABLED(LCD_PROGRESS_BAR)
#if DISABLED(SDSUPPORT)
- #error LCD_PROGRESS_BAR requires SDSUPPORT.
+ #error "LCD_PROGRESS_BAR requires SDSUPPORT."
#endif
#if ENABLED(DOGLCD)
- #error LCD_PROGRESS_BAR does not apply to graphical displays.
+ #error "LCD_PROGRESS_BAR does not apply to graphical displays."
#endif
#if ENABLED(FILAMENT_LCD_DISPLAY)
- #error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
+ #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
#endif
#endif
@@ -100,13 +100,13 @@
*/
#if ENABLED(BABYSTEPPING)
#if DISABLED(ULTRA_LCD)
- #error BABYSTEPPING requires an LCD controller.
+ #error "BABYSTEPPING requires an LCD controller."
#endif
#if ENABLED(SCARA)
- #error BABYSTEPPING is not implemented for SCARA yet.
+ #error "BABYSTEPPING is not implemented for SCARA yet."
#endif
#if ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
- #error BABYSTEPPING only implemented for Z axis on deltabots.
+ #error "BABYSTEPPING only implemented for Z axis on deltabots."
#endif
#endif
@@ -114,7 +114,7 @@
* Filament Change with Extruder Runout Prevention
*/
#if ENABLED(FILAMENTCHANGEENABLE) && ENABLED(EXTRUDER_RUNOUT_PREVENT)
- #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE.
+ #error "EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE."
#endif
/**
@@ -123,23 +123,23 @@
#if EXTRUDERS > 1
#if EXTRUDERS > 4
- #error The maximum number of EXTRUDERS in Marlin is 4.
+ #error "The maximum number of EXTRUDERS in Marlin is 4."
#endif
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
- #error EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT.
+ #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
#endif
#if ENABLED(HEATERS_PARALLEL)
- #error EXTRUDERS must be 1 with HEATERS_PARALLEL.
+ #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
- #error EXTRUDERS must be 1 with Y_DUAL_STEPPER_DRIVERS.
+ #error "EXTRUDERS must be 1 with Y_DUAL_STEPPER_DRIVERS."
#endif
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
- #error EXTRUDERS must be 1 with Z_DUAL_STEPPER_DRIVERS.
+ #error "EXTRUDERS must be 1 with Z_DUAL_STEPPER_DRIVERS."
#endif
#endif // EXTRUDERS > 1
@@ -148,16 +148,16 @@
* Limited number of servos
*/
#if NUM_SERVOS > 4
- #error The maximum number of SERVOS in Marlin is 4.
+ #error "The maximum number of SERVOS in Marlin is 4."
#endif
#if defined(NUM_SERVOS) && NUM_SERVOS > 0
#if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0
#if X_ENDSTOP_SERVO_NR >= NUM_SERVOS
- #error X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS.
+ #error "X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
#elif Y_ENDSTOP_SERVO_NR >= NUM_SERVOS
- #error Y_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS.
+ #error "Y_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
#elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
- #error Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS.
+ #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
#endif
#endif
#endif
@@ -166,21 +166,21 @@
* Servo deactivation depends on servo endstops
*/
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_SERVO_ENDSTOPS
- #error At least one of the ?_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE.
+ #error "At least one of the ?_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE."
#endif
/**
* Required LCD language
*/
#if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
- #error You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller.
+ #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
#endif
/**
* Bed Heating Options - PID vs Limit Switching
*/
#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
- #error To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED.
+ #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
#endif
/**
@@ -188,16 +188,16 @@
*/
#if ENABLED(MESH_BED_LEVELING)
#if ENABLED(DELTA)
- #error MESH_BED_LEVELING does not yet support DELTA printers.
+ #error "MESH_BED_LEVELING does not yet support DELTA printers."
#endif
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
- #error Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both.
+ #error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both."
#endif
#if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7
- #error MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8.
+ #error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8."
#endif
#elif ENABLED(MANUAL_BED_LEVELING)
- #error MESH_BED_LEVELING is required for MANUAL_BED_LEVELING.
+ #error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING."
#endif
/**
@@ -210,21 +210,21 @@
* A probe needs a pin
*/
#if !PROBE_PIN_CONFIGURED
- #error A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN.
+ #error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN."
#endif
/**
* Z_MIN_PIN and Z_MIN_PROBE_PIN can't co-exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
*/
#if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
- #error A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN.
+ #error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN."
#endif
/**
* Make sure the plug is enabled if it's used
*/
#if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG)
- #error You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug.
+ #error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug."
#endif
/**
@@ -233,7 +233,7 @@
#if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(MECHANICAL_PROBE) || HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \
|| (ENABLED(MECHANICAL_PROBE) && (HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \
|| (HAS_Z_ENDSTOP_SERVO && ENABLED(Z_PROBE_SLED))
- #error Please define only one type of probe: Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE.
+ #error "Please define only one type of probe: Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
#endif
/**
@@ -244,7 +244,7 @@
#elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)
#error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
#elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP)
- #error DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set.
+ #error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set."
#endif
/**
@@ -256,16 +256,16 @@
#endif
// Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
//#ifndef NUM_SERVOS
- // #error You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP.
+ // #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP."
//#endif
//#if defined(NUM_SERVOS) && NUM_SERVOS < 1
- // #error You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP.
+ // #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP."
//#endif
//#if Z_ENDSTOP_SERVO_NR < 0
- // #error You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP.
+ // #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP."
//#endif
//#ifndef SERVO_ENDSTOP_ANGLES
- // #error You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP.
+ // #error "You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP."
//#endif
#endif
@@ -275,7 +275,7 @@
* Require some kind of probe for bed leveling
*/
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
- #error AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE.
+ #error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
#endif
#endif
@@ -291,9 +291,9 @@
#if !PIN_EXISTS(Z_MIN)
#if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it.
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
- #error You must have a Z_MIN or Z_PROBE endstop to enable Z_MIN_PROBE_REPEATABILITY_TEST.
+ #error "You must have a Z_MIN or Z_PROBE endstop to enable Z_MIN_PROBE_REPEATABILITY_TEST."
#else
- #error AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin.
+ #error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin."
#endif
#endif
#endif
@@ -305,9 +305,9 @@
#ifndef DELTA_PROBEABLE_RADIUS
// Be sure points are in the right order
#if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
- #error LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION.
+ #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."
#elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
- #error FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION.
+ #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."
#endif
// Make sure probing points are reachable
#if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
@@ -345,7 +345,7 @@
* Filament Width Sensor
*/
#if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
- #error FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined.
+ #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
#endif
@@ -353,11 +353,11 @@
* ULTIPANEL encoder
*/
#if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
- #error ULTIPANEL requires some kind of encoder.
+ #error "ULTIPANEL requires some kind of encoder."
#endif
#if ENCODER_PULSES_PER_STEP < 0
- #error ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead
+ #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead"
#endif
/**
@@ -368,11 +368,11 @@
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#if DISABLED(AUTO_BED_LEVELING_GRID)
- #error Only AUTO_BED_LEVELING_GRID is supported with DELTA.
+ #error "Only AUTO_BED_LEVELING_GRID is supported with DELTA."
#endif
#if ENABLED(Z_PROBE_SLED)
- #error You cannot use Z_PROBE_SLED with DELTA.
+ #error "You cannot use Z_PROBE_SLED with DELTA."
#endif
#endif
@@ -383,7 +383,7 @@
* Allen Key Z probe requires Auto Bed Leveling grid and Delta
*/
#if ENABLED(Z_PROBE_ALLEN_KEY) && !(ENABLED(AUTO_BED_LEVELING_GRID) && ENABLED(DELTA))
- #error Invalid use of Z_PROBE_ALLEN_KEY.
+ #error "Invalid use of Z_PROBE_ALLEN_KEY."
#endif
/**
@@ -394,10 +394,10 @@
|| !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR \
|| !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \
|| !HAS_X_MAX
- #error Missing or invalid definitions for DUAL_X_CARRIAGE mode.
+ #error "Missing or invalid definitions for DUAL_X_CARRIAGE mode."
#endif
#if X_HOME_DIR != -1 || X2_HOME_DIR != 1
- #error Please use canonical x-carriage assignment.
+ #error "Please use canonical x-carriage assignment."
#endif
#endif // DUAL_X_CARRIAGE
@@ -407,30 +407,30 @@
#if HAS_AUTO_FAN
#if HAS_FAN0
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
- #error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN.
+ #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
- #error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN.
+ #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
- #error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN.
+ #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN."
#elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN
- #error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN.
+ #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN."
#endif
#endif
#endif
#if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN
- #error You cannot set CONTROLLERFAN_PIN equal to FAN_PIN.
+ #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN."
#endif
#if HAS_CONTROLLERFAN
#if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
- #error You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
+ #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
- #error You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
+ #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
- #error You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
+ #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
- #error You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN.
+ #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
#endif
#endif
@@ -439,110 +439,110 @@
*/
#if EXTRUDERS > 3
#if TEMP_SENSOR_3 == 0
- #error TEMP_SENSOR_3 is required with 4 EXTRUDERS.
+ #error "TEMP_SENSOR_3 is required with 4 EXTRUDERS."
#elif !HAS_HEATER_3
- #error HEATER_3_PIN not defined for this board.
+ #error "HEATER_3_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_3)
- #error TEMP_3_PIN not defined for this board.
+ #error "TEMP_3_PIN not defined for this board."
#elif !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
- #error E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board.
+ #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
#endif
#elif EXTRUDERS > 2
#if TEMP_SENSOR_2 == 0
- #error TEMP_SENSOR_2 is required with 3 or more EXTRUDERS.
+ #error "TEMP_SENSOR_2 is required with 3 or more EXTRUDERS."
#elif !HAS_HEATER_2
- #error HEATER_2_PIN not defined for this board.
+ #error "HEATER_2_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_2)
- #error TEMP_2_PIN not defined for this board.
+ #error "TEMP_2_PIN not defined for this board."
#elif !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
- #error E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board.
+ #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
#endif
#elif EXTRUDERS > 1
#if TEMP_SENSOR_1 == 0
- #error TEMP_SENSOR_1 is required with 2 or more EXTRUDERS.
+ #error "TEMP_SENSOR_1 is required with 2 or more EXTRUDERS."
#elif !PIN_EXISTS(TEMP_1)
- #error TEMP_1_PIN not defined for this board.
+ #error "TEMP_1_PIN not defined for this board."
#elif !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
- #error E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board.
+ #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
#endif
#endif
#if EXTRUDERS > 1 || ENABLED(HEATERS_PARALLEL)
#if !HAS_HEATER_1
- #error HEATER_1_PIN not defined for this board.
+ #error "HEATER_1_PIN not defined for this board."
#endif
#endif
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
- #error TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT.
+ #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
#endif
#if !HAS_HEATER_0
- #error HEATER_0_PIN not defined for this board.
+ #error "HEATER_0_PIN not defined for this board."
#elif !PIN_EXISTS(TEMP_0)
- #error TEMP_0_PIN not defined for this board.
+ #error "TEMP_0_PIN not defined for this board."
#elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
- #error E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board.
+ #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
#elif TEMP_SENSOR_0 == 0
- #error TEMP_SENSOR_0 is required.
+ #error "TEMP_SENSOR_0 is required."
#endif
/**
* Endstops
*/
#if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_)
- #error You must enable USE_XMIN_PLUG or USE_XMAX_PLUG
+ #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG"
#elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_)
- #error You must enable USE_YMIN_PLUG or USE_YMAX_PLUG
+ #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG"
#elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_)
- #error You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG
+ #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG"
#elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP
- #error You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS
+ #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS"
#endif
/**
* Warnings for old configurations
*/
#if WATCH_TEMP_PERIOD > 500
- #error WATCH_TEMP_PERIOD now uses seconds instead of milliseconds.
+ #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
#elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
- #error Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS.
+ #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
#elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
- #error Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED.
+ #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
#elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE)
#error "Z_LATE_ENABLE can't be used with COREXZ."
#elif defined(X_HOME_RETRACT_MM)
- #error [XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM.
+ #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
#elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
- #error PROBE_SERVO_DEACTIVATION_DELAY has been replaced with DEACTIVATE_SERVOS_AFTER_MOVE and SERVO_DEACTIVATION_DELAY.
+ #error "PROBE_SERVO_DEACTIVATION_DELAY has been replaced with DEACTIVATE_SERVOS_AFTER_MOVE and SERVO_DEACTIVATION_DELAY."
#elif defined(BEEPER)
- #error BEEPER is now BEEPER_PIN. Please update your pins definitions.
+ #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECT)
- #error SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions.
+ #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
#elif defined(SDCARDDETECTINVERTED)
- #error SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration.
+ #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
#elif defined(BTENABLED)
- #error BTENABLED is now BLUETOOTH. Please update your configuration.
+ #error "BTENABLED is now BLUETOOTH. Please update your configuration."
#elif defined(CUSTOM_MENDEL_NAME)
- #error CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration.
+ #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
#elif defined(HAS_AUTOMATIC_VERSIONING)
- #error HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration.
+ #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
#elif defined(ENABLE_AUTO_BED_LEVELING)
- #error ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration.
+ #error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration."
#elif defined(SDSLOW)
- #error SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead.
+ #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
#elif defined(SDEXTRASLOW)
- #error SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead.
+ #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
#elif defined(Z_RAISE_BEFORE_HOMING)
- #error Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead.
+ #error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead."
#elif defined(FILAMENT_SENSOR)
- #error FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead.
+ #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
- #error DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead.
+ #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
#elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
- #error Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2
+ #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
#elif defined(LANGUAGE_INCLUDE)
- #error LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration.
+ #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
#endif
#endif //SANITYCHECK_H
diff --git a/Marlin/Sd2Card.cpp b/Marlin/Sd2Card.cpp
index 49be3c0668..f077e9e771 100644
--- a/Marlin/Sd2Card.cpp
+++ b/Marlin/Sd2Card.cpp
@@ -36,7 +36,7 @@
//------------------------------------------------------------------------------
// make sure SPCR rate is in expected bits
#if (SPR0 != 0 || SPR1 != 1)
- #error unexpected SPCR bits
+ #error "unexpected SPCR bits"
#endif
/**
* Initialize hardware SPI
diff --git a/Marlin/Sd2PinMap.h b/Marlin/Sd2PinMap.h
index 7490f3474b..3ad6b795a8 100644
--- a/Marlin/Sd2PinMap.h
+++ b/Marlin/Sd2PinMap.h
@@ -393,7 +393,7 @@ static const pin_map_t digitalPinMap[] = {
{&DDRG, &PING, &PORTG, 0}, // G0 50
};
#else // defined(__AVR_ATmega1280__)
-#error unknown chip
+#error "unknown chip"
#endif // defined(__AVR_ATmega1280__)
//------------------------------------------------------------------------------
static const uint8_t digitalPinCount = COUNT(digitalPinMap);
diff --git a/Marlin/fastio.h b/Marlin/fastio.h
index fe8fa70e95..10464bf505 100644
--- a/Marlin/fastio.h
+++ b/Marlin/fastio.h
@@ -4038,7 +4038,7 @@
#endif
#ifndef DIO0_PIN
- #error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request
+ #error "pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request"
#endif
#endif /* _FASTIO_ARDUINO_H */
diff --git a/Marlin/pins.h b/Marlin/pins.h
index a13df540c4..f4e660133c 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -154,7 +154,7 @@
#elif MB(SAINSMART_2IN1)
#include "pins_SAINSMART_2IN1.h"
#else
- #error Unknown MOTHERBOARD value set in Configuration.h
+ #error "Unknown MOTHERBOARD value set in Configuration.h"
#endif
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
diff --git a/Marlin/pins_5DPRINT.h b/Marlin/pins_5DPRINT.h
index 170717870d..20c6ed51a8 100644
--- a/Marlin/pins_5DPRINT.h
+++ b/Marlin/pins_5DPRINT.h
@@ -27,7 +27,7 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "Makibox"
diff --git a/Marlin/pins_A4JP.h b/Marlin/pins_A4JP.h
index 5cd0d38976..956ddbd673 100644
--- a/Marlin/pins_A4JP.h
+++ b/Marlin/pins_A4JP.h
@@ -25,7 +25,7 @@
************************************************/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
// Servo support
diff --git a/Marlin/pins_BQ_ZUM_MEGA_3D.h b/Marlin/pins_BQ_ZUM_MEGA_3D.h
index d8ea114613..c6b53d8703 100644
--- a/Marlin/pins_BQ_ZUM_MEGA_3D.h
+++ b/Marlin/pins_BQ_ZUM_MEGA_3D.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#include "pins_RAMPS_13.h"
diff --git a/Marlin/pins_BRAINWAVE.h b/Marlin/pins_BRAINWAVE.h
index a02b6515f4..e4ab626c3a 100644
--- a/Marlin/pins_BRAINWAVE.h
+++ b/Marlin/pins_BRAINWAVE.h
@@ -28,7 +28,7 @@
*/
#ifndef __AVR_AT90USB646__
- #error Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
#endif
#define X_STEP_PIN 27
diff --git a/Marlin/pins_BRAINWAVE_PRO.h b/Marlin/pins_BRAINWAVE_PRO.h
index c79f04eb65..34dc8bbe0d 100644
--- a/Marlin/pins_BRAINWAVE_PRO.h
+++ b/Marlin/pins_BRAINWAVE_PRO.h
@@ -28,13 +28,13 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Brainwave Pro' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Brainwave Pro' selected from the 'Tools -> Boards' menu."
#endif
#include "fastio.h"
#ifndef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
- #error Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config
+ #error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_CHEAPTRONIC.h b/Marlin/pins_CHEAPTRONIC.h
index 1bbd979520..88f7723827 100644
--- a/Marlin/pins_CHEAPTRONIC.h
+++ b/Marlin/pins_CHEAPTRONIC.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_ELEFU_3.h b/Marlin/pins_ELEFU_3.h
index 23f8b944f1..008e567aac 100644
--- a/Marlin/pins_ELEFU_3.h
+++ b/Marlin/pins_ELEFU_3.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define X_STEP_PIN 49
diff --git a/Marlin/pins_GEN3_MONOLITHIC.h b/Marlin/pins_GEN3_MONOLITHIC.h
index ba61fd2a68..6bb7208c8e 100644
--- a/Marlin/pins_GEN3_MONOLITHIC.h
+++ b/Marlin/pins_GEN3_MONOLITHIC.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega644P__
- #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#define DEBUG_PIN 0
diff --git a/Marlin/pins_GEN3_PLUS.h b/Marlin/pins_GEN3_PLUS.h
index 15241bfb53..381b91242a 100644
--- a/Marlin/pins_GEN3_PLUS.h
+++ b/Marlin/pins_GEN3_PLUS.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
- #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#define X_STEP_PIN 15
diff --git a/Marlin/pins_GEN6.h b/Marlin/pins_GEN6.h
index 6d1ce468da..771c965f05 100644
--- a/Marlin/pins_GEN6.h
+++ b/Marlin/pins_GEN6.h
@@ -26,7 +26,7 @@
#ifndef __AVR_ATmega644P__
#ifndef __AVR_ATmega1284P__
- #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#endif
diff --git a/Marlin/pins_GEN7_12.h b/Marlin/pins_GEN7_12.h
index 0c23c06482..851ecd2efa 100644
--- a/Marlin/pins_GEN7_12.h
+++ b/Marlin/pins_GEN7_12.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
- #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif
#ifndef GEN7_VERSION
diff --git a/Marlin/pins_GEN7_14.h b/Marlin/pins_GEN7_14.h
index 04a4fce1ac..37b0700829 100644
--- a/Marlin/pins_GEN7_14.h
+++ b/Marlin/pins_GEN7_14.h
@@ -27,7 +27,7 @@
#define GEN7_VERSION 14 // v1.4
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
- #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif
//x axis pins
diff --git a/Marlin/pins_GEN7_CUSTOM.h b/Marlin/pins_GEN7_CUSTOM.h
index 9150a41b9e..89a5320d59 100644
--- a/Marlin/pins_GEN7_CUSTOM.h
+++ b/Marlin/pins_GEN7_CUSTOM.h
@@ -28,7 +28,7 @@
*/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
- #error Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
#endif
//x axis pins
diff --git a/Marlin/pins_LEAPFROG.h b/Marlin/pins_LEAPFROG.h
index 8d1a2401a9..df7ba191ee 100644
--- a/Marlin/pins_LEAPFROG.h
+++ b/Marlin/pins_LEAPFROG.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define X_STEP_PIN 28
diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h
index 61cd91be01..a82d4f6478 100644
--- a/Marlin/pins_MEGACONTROLLER.h
+++ b/Marlin/pins_MEGACONTROLLER.h
@@ -25,11 +25,11 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#if EXTRUDERS > 2
- #error Mega Controller supports up to 2 extruders. Comment this line to keep going.
+ #error "Mega Controller supports up to 2 extruders. Comment this line to keep going."
#endif
#define SERVO0_PIN 30
diff --git a/Marlin/pins_MEGATRONICS.h b/Marlin/pins_MEGATRONICS.h
index e25cf8a55b..d8b957c78e 100644
--- a/Marlin/pins_MEGATRONICS.h
+++ b/Marlin/pins_MEGATRONICS.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_MEGATRONICS_2.h b/Marlin/pins_MEGATRONICS_2.h
index 186f154275..0fc1b48520 100644
--- a/Marlin/pins_MEGATRONICS_2.h
+++ b/Marlin/pins_MEGATRONICS_2.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_MEGATRONICS_3.h b/Marlin/pins_MEGATRONICS_3.h
index 46f98807b2..093f653738 100644
--- a/Marlin/pins_MEGATRONICS_3.h
+++ b/Marlin/pins_MEGATRONICS_3.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h
index a67dd9c3a8..c26142f885 100644
--- a/Marlin/pins_MINIRAMBO.h
+++ b/Marlin/pins_MINIRAMBO.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_MINITRONICS.h b/Marlin/pins_MINITRONICS.h
index 8bd7b5fc1e..0ffa9f0639 100644
--- a/Marlin/pins_MINITRONICS.h
+++ b/Marlin/pins_MINITRONICS.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega1281__
- #error Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_OMCA.h b/Marlin/pins_OMCA.h
index e98439608f..eeeaecc453 100644
--- a/Marlin/pins_OMCA.h
+++ b/Marlin/pins_OMCA.h
@@ -52,7 +52,7 @@
*/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__)
- #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)
+ #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)"
#endif
#define X_STEP_PIN 26
diff --git a/Marlin/pins_OMCA_A.h b/Marlin/pins_OMCA_A.h
index 147006de75..53ebc90d36 100644
--- a/Marlin/pins_OMCA_A.h
+++ b/Marlin/pins_OMCA_A.h
@@ -51,7 +51,7 @@
*/
#ifndef __AVR_ATmega644__
- #error Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu."
#endif
#define X_STEP_PIN 21
diff --git a/Marlin/pins_PRINTRBOARD.h b/Marlin/pins_PRINTRBOARD.h
index bd269fc926..c1febdfc53 100644
--- a/Marlin/pins_PRINTRBOARD.h
+++ b/Marlin/pins_PRINTRBOARD.h
@@ -28,11 +28,11 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
- #error These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
+ #error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_PRINTRBOARD_REVF.h b/Marlin/pins_PRINTRBOARD_REVF.h
index bf4e2b4a41..54f52e5a82 100644
--- a/Marlin/pins_PRINTRBOARD_REVF.h
+++ b/Marlin/pins_PRINTRBOARD_REVF.h
@@ -28,11 +28,11 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
- #error These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
+ #error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h
index 39da6c75d4..52df222c8e 100644
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_RAMPS_14.h b/Marlin/pins_RAMPS_14.h
index dc1f219d39..721e63e13e 100644
--- a/Marlin/pins_RAMPS_14.h
+++ b/Marlin/pins_RAMPS_14.h
@@ -45,7 +45,7 @@
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_RAMPS_OLD.h b/Marlin/pins_RAMPS_OLD.h
index 25193c8ed8..a5d2abb1e8 100644
--- a/Marlin/pins_RAMPS_OLD.h
+++ b/Marlin/pins_RAMPS_OLD.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
// Uncomment the following line for RAMPS v1.0
diff --git a/Marlin/pins_RUMBA.h b/Marlin/pins_RUMBA.h
index 8464190c7c..accbce0ad1 100644
--- a/Marlin/pins_RUMBA.h
+++ b/Marlin/pins_RUMBA.h
@@ -25,11 +25,11 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#if EXTRUDERS > 3
- #error RUMBA supports up to 3 extruders. Comment this line to keep going.
+ #error "RUMBA supports up to 3 extruders. Comment this line to keep going."
#endif
#define DEFAULT_MACHINE_NAME "Rumba"
diff --git a/Marlin/pins_SANGUINOLOLU_11.h b/Marlin/pins_SANGUINOLOLU_11.h
index d848548787..11a94c146d 100644
--- a/Marlin/pins_SANGUINOLOLU_11.h
+++ b/Marlin/pins_SANGUINOLOLU_11.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
- #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
#endif
#define X_STEP_PIN 15
diff --git a/Marlin/pins_SAV_MKI.h b/Marlin/pins_SAV_MKI.h
index 579d653e09..52a558c7f0 100644
--- a/Marlin/pins_SAV_MKI.h
+++ b/Marlin/pins_SAV_MKI.h
@@ -28,7 +28,7 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "SAV MkI"
diff --git a/Marlin/pins_SETHI.h b/Marlin/pins_SETHI.h
index e16b45cea2..fd9d9fd31d 100644
--- a/Marlin/pins_SETHI.h
+++ b/Marlin/pins_SETHI.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
- #error Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
#endif
#ifndef GEN7_VERSION
diff --git a/Marlin/pins_TEENSY2.h b/Marlin/pins_TEENSY2.h
index eb27ae97d6..5df4fb0477 100644
--- a/Marlin/pins_TEENSY2.h
+++ b/Marlin/pins_TEENSY2.h
@@ -66,11 +66,11 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif
#ifndef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
- #error Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config
+ #error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
// (or build from command line)
#endif
diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h
index ea1492429b..4959b5fffa 100644
--- a/Marlin/pins_TEENSYLU.h
+++ b/Marlin/pins_TEENSYLU.h
@@ -28,11 +28,11 @@
*/
#ifndef __AVR_AT90USB1286__
- #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu."
#endif
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
- #error These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
+ #error "These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
#endif
#define LARGE_FLASH true
diff --git a/Marlin/pins_ULTIMAIN_2.h b/Marlin/pins_ULTIMAIN_2.h
index 8682a54fce..61be6d7f1e 100644
--- a/Marlin/pins_ULTIMAIN_2.h
+++ b/Marlin/pins_ULTIMAIN_2.h
@@ -25,7 +25,7 @@
*/
#ifndef __AVR_ATmega2560__
- #error Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "Ultimaker"
diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h
index ab7a5da832..b101a70c97 100644
--- a/Marlin/pins_ULTIMAKER.h
+++ b/Marlin/pins_ULTIMAKER.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "Ultimaker"
diff --git a/Marlin/pins_ULTIMAKER_OLD.h b/Marlin/pins_ULTIMAKER_OLD.h
index e2d48e67d6..1511923ebe 100644
--- a/Marlin/pins_ULTIMAKER_OLD.h
+++ b/Marlin/pins_ULTIMAKER_OLD.h
@@ -25,7 +25,7 @@
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "Ultimaker"
diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h
index aeef2c7f76..370ed342ff 100644
--- a/Marlin/thermistortables.h
+++ b/Marlin/thermistortables.h
@@ -1177,7 +1177,7 @@ const short temptable_1047[][2] PROGMEM = {
#define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
#else
#ifdef HEATER_0_USES_THERMISTOR
- #error No heater 0 thermistor table specified
+ #error "No heater 0 thermistor table specified"
#else // HEATER_0_USES_THERMISTOR
#define HEATER_0_TEMPTABLE NULL
#define HEATER_0_TEMPTABLE_LEN 0
@@ -1200,7 +1200,7 @@ const short temptable_1047[][2] PROGMEM = {
#define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
#else
#ifdef HEATER_1_USES_THERMISTOR
- #error No heater 1 thermistor table specified
+ #error "No heater 1 thermistor table specified"
#else // HEATER_1_USES_THERMISTOR
#define HEATER_1_TEMPTABLE NULL
#define HEATER_1_TEMPTABLE_LEN 0
@@ -1223,7 +1223,7 @@ const short temptable_1047[][2] PROGMEM = {
#define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
#else
#ifdef HEATER_2_USES_THERMISTOR
- #error No heater 2 thermistor table specified
+ #error "No heater 2 thermistor table specified"
#else // HEATER_2_USES_THERMISTOR
#define HEATER_2_TEMPTABLE NULL
#define HEATER_2_TEMPTABLE_LEN 0
@@ -1246,7 +1246,7 @@ const short temptable_1047[][2] PROGMEM = {
#define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
#else
#ifdef HEATER_3_USES_THERMISTOR
- #error No heater 3 thermistor table specified
+ #error "No heater 3 thermistor table specified"
#else // HEATER_3_USES_THERMISTOR
#define HEATER_3_TEMPTABLE NULL
#define HEATER_3_TEMPTABLE_LEN 0
@@ -1269,7 +1269,7 @@ const short temptable_1047[][2] PROGMEM = {
#define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
#ifdef BED_USES_THERMISTOR
- #error No bed thermistor table specified
+ #error "No bed thermistor table specified"
#endif // BED_USES_THERMISTOR
#endif
diff --git a/Marlin/utf_mapper.h b/Marlin/utf_mapper.h
index 22d5d406ce..bb53fad4c5 100644
--- a/Marlin/utf_mapper.h
+++ b/Marlin/utf_mapper.h
@@ -74,7 +74,7 @@
// ヰ ヱ ヲ ン フ ? ? ? ? ? ヲ ・ ー ヽ ヽ ?
};
#elif ENABLED(MAPPER_D0D1)
- #error( "Cyrillic on a japanese dsplay makes no sense. There are no matching symbols.");
+ #error "Cyrillic on a japanese dsplay makes no sense. There are no matching symbols."
#endif
#elif DISPLAY_CHARSET_HD44780 == WESTERN
@@ -108,7 +108,7 @@
// p c T y Ф x Ч ч Ш Щ Ъ Ы b Э Ю Я
};
#elif ENABLED(MAPPER_E382E383)
- #error( "Katakana on a western display makes no sense. There are no matching symbols." );
+ #error "Katakana on a western display makes no sense. There are no matching symbols."
#endif
#elif DISPLAY_CHARSET_HD44780 == CYRILLIC
@@ -135,12 +135,12 @@
// ш щ ъ ы ь э ю я // 7 Ѱ ѱ Ѳ ѳ Ѵ ѵ Ѷ ѷ
}; // ѻ ѹ Ѻ ѻ Ѽ ѽ Ѿ ѿ
#elif ENABLED(MAPPER_C2C3)
- #error( "Western languages on a cyrillic display makes no sense. There are no matching symbols." );
+ #error "Western languages on a cyrillic display makes no sense. There are no matching symbols."
#elif ENABLED(MAPPER_E382E383)
- #error( "Katakana on a cyrillic display makes no sense. There are no matching symbols." );
+ #error "Katakana on a cyrillic display makes no sense. There are no matching symbols."
#endif
#else
- #error("Something went wrong in the setting of DISPLAY_CHARSET_HD44780");
+ #error "Something went wrong in the setting of DISPLAY_CHARSET_HD44780"
#endif // DISPLAY_CHARSET_HD44780
#endif // SIMULATE_ROMFONT
--
GitLab