diff --git a/Marlin/language_da.h b/Marlin/language_da.h new file mode 100644 index 0000000000000000000000000000000000000000..8f2688b6b55c253ea6c57e481e93c1b2301932ca --- /dev/null +++ b/Marlin/language_da.h @@ -0,0 +1,148 @@ +/** + * Danish + * + * LCD Menu Messages + * See also documentation/LCDLanguageFont.md + * + */ +#ifndef LANGUAGE_DA_H +#define LANGUAGE_DA_H + +#define MAPPER_C2C3 +// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h +//#define SIMULATE_ROMFONT +#define DISPLAY_CHARSET_ISO10646_1 + +#define MSG_MAIN "Menu" +#define WELCOME_MSG MACHINE_NAME " er klar" +#define MSG_SD_INSERTED "Kort isat" +#define MSG_SD_REMOVED "Kort fjernet" +#define MSG_AUTOSTART "Autostart" +#define MSG_AUTO_HOME "Home" // G28 +#define MSG_COOLDOWN "Afkøl" +#define MSG_DISABLE_STEPPERS "Slå stepper fra" +#define MSG_SET_HOME_OFFSETS "Sæt home offsets" +#define MSG_SET_ORIGIN "Sæt origin" +#define MSG_SWITCH_PS_ON "Slå strøm til" +#define MSG_SWITCH_PS_OFF "Slå strøm fra" +#define MSG_PREHEAT_PLA "Forvarm PLA" +#define MSG_PREHEAT_PLA_N "Forvarm PLA " +#define MSG_PREHEAT_PLA_ALL "Forvarm PLA Alle" +#define MSG_PREHEAT_PLA_BEDONLY "Forvarm PLA Bed" +#define MSG_PREHEAT_PLA_SETTINGS "Forvarm PLA conf" +#define MSG_PREHEAT_ABS "Forvarm ABS" +#define MSG_PREHEAT_ABS_N "Forvarm ABS " +#define MSG_PREHEAT_ABS_ALL "Forvarm ABS Alle" +#define MSG_PREHEAT_ABS_BEDONLY "Forvarm ABS Bed" +#define MSG_PREHEAT_ABS_SETTINGS "Forvarm ABS conf" +#define MSG_EXTRUDE "Extruder" +#define MSG_RETRACT "Retract" +#define MSG_MOVE_AXIS "Flyt akser" +#define MSG_MOVE_X "Flyt X" +#define MSG_MOVE_Y "Flyt Y" +#define MSG_MOVE_Z "Flyt Z" +#define MSG_MOVE_E "Extruder" +#define MSG_MOVE_E1 "Extruder2" +#define MSG_MOVE_E2 "Extruder3" +#define MSG_MOVE_01MM "Flyt 0.1mm" +#define MSG_MOVE_1MM "Flyt 1mm" +#define MSG_MOVE_10MM "Flyt 10mm" +#define MSG_SPEED "Hastighed" +#define MSG_NOZZLE "Dyse" +#define MSG_NOZZLE1 "Dyse2" +#define MSG_NOZZLE2 "Dyse3" +#define MSG_BED "Plade" +#define MSG_FAN_SPEED "Blæser hastighed" +#define MSG_FLOW "Flow" +#define MSG_FLOW0 "Flow 0" +#define MSG_FLOW1 "Flow 1" +#define MSG_FLOW2 "Flow 2" +#define MSG_CONTROL "Kontrol" +#define MSG_MIN " \002 Min" +#define MSG_MAX " \002 Max" +#define MSG_FACTOR " \002 Fact" +#define MSG_AUTOTEMP "Autotemp" +#define MSG_ON "On " +#define MSG_OFF "Off" +#define MSG_PID_P "PID-P" +#define MSG_PID_I "PID-I" +#define MSG_PID_D "PID-D" +#define MSG_PID_C "PID-C" +#define MSG_ACC "Accel" +#define MSG_VXY_JERK "Vxy-jerk" +#define MSG_VZ_JERK "Vz-jerk" +#define MSG_VE_JERK "Ve-jerk" +#define MSG_VMAX "Vmax " +#define MSG_X "x" +#define MSG_Y "y" +#define MSG_Z "z" +#define MSG_E "e" +#define MSG_VMIN "Vmin" +#define MSG_VTRAV_MIN "VTrav min" +#define MSG_AMAX "Amax " +#define MSG_A_RETRACT "A-retract" +#define MSG_XSTEPS "Xsteps/mm" +#define MSG_YSTEPS "Ysteps/mm" +#define MSG_ZSTEPS "Zsteps/mm" +#define MSG_ESTEPS "Esteps/mm" +#define MSG_TEMPERATURE "Temperatur" +#define MSG_MOTION "Motion" +#define MSG_VOLUMETRIC "Filament" +#define MSG_VOLUMETRIC_ENABLED "E in mm3" +#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" +#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" +#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" +#define MSG_CONTRAST "LCD kontrast" +#define MSG_STORE_EPROM "Gem i EEPROM" +#define MSG_LOAD_EPROM "Hent fra EEPROM" +#define MSG_RESTORE_FAILSAFE "Gendan failsafe" +#define MSG_REFRESH "Genopfrisk" +#define MSG_WATCH "Info skærm" +#define MSG_PREPARE "Forbered" +#define MSG_TUNE "Tune" +#define MSG_PAUSE_PRINT "Pause printet" +#define MSG_RESUME_PRINT "Forsæt printet" +#define MSG_STOP_PRINT "Stop printet" +#define MSG_CARD_MENU "Print fra SD" +#define MSG_NO_CARD "Intet SD kort" +#define MSG_DWELL "Dvale..." +#define MSG_USERWAIT "Venter på bruger..." +#define MSG_RESUMING "Forsætter printet" +#define MSG_PRINT_ABORTED "Print annuleret" +#define MSG_NO_MOVE "No move." +#define MSG_KILLED "KILLED. " +#define MSG_STOPPED "STOPPED. " +#define MSG_CONTROL_RETRACT "Tilbagetraek mm" +#define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm" +#define MSG_CONTROL_RETRACTF "Tilbagetræk V" +#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" +#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" +#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" +#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" +#define MSG_AUTORETRACT "AutoRetr." +#define MSG_ZPROBE_OUT "Probe udenfor plade" +#define MSG_FILAMENTCHANGE "Skift filament" +#define MSG_INIT_SDCARD "Init. SD card" +#define MSG_CNG_SDCARD "Skift SD kort" +#define MSG_POSITION_UNKNOWN "Home X/Y før Z" +#define MSG_ZPROBE_ZOFFSET "Z Offset" +#define MSG_BABYSTEP_X "Babystep X" +#define MSG_BABYSTEP_Y "Babystep Y" +#define MSG_BABYSTEP_Z "Babystep Z" +#define MSG_END_HOUR "Timer" +#define MSG_END_MINUTE "Minutter" +#define MSG_HEATING "Opvarmer..." +#define MSG_HEATING_COMPLETE "Opvarmet" +#define MSG_BED_HEATING "Opvarmer plade" +#define MSG_BED_DONE "Plade opvarmet" +#define MSG_ENDSTOP_ABORT "Endstop abort" + +#ifdef DELTA_CALIBRATION_MENU + #define MSG_DELTA_CALIBRATE "Delta Kalibrering" + #define MSG_DELTA_CALIBRATE_X "Kalibrer X" + #define MSG_DELTA_CALIBRATE_Y "Kalibrer Y" + #define MSG_DELTA_CALIBRATE_Z "Kalibrer Z" + #define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center" +#endif // DELTA_CALIBRATION_MENU + +#endif // LANGUAGE_DA_H