diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h index 7e55655ed8ca555c94c53ceb88d1f88e09cb2da2..2f97787a681eda5dc2988db8cc29b0100f3aaea8 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h @@ -797,6 +797,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h index 84443b674cf75371173dc4c43b25d1c38067ad80..98b9149a8cb9fa7ed4ce5691ed21d9e9fb360d47 100644 --- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h +++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h index f67960eea400bf63afaefad948a4642fc5de51a9..db6b8479a17d358a025dcace35c442da98b84bb0 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration.h @@ -843,12 +843,17 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -//#define Z_AFTER_PROBING 5 // Z position after probing is done -//#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -//#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -//#define Z_AFTER_PROBING 3 // Z position after probing is done +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + //#define Z_AFTER_PROBING 5 // Z position after probing is done +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points + //#define Z_AFTER_PROBING 3 // Z position after probing is done +#endif + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h index 1b729289246cd84da7bfd08399426474821e69b6..fe142bb2a81c9684376e60da88e94cc4afed4d14 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration.h @@ -784,6 +784,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h index 83234e15ec1fcadc9b23906926f2357b7c8137ab..88524909dfedf17241a453f9d7760ec13dd64750 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h index a8d7688f06a99f70afc774d8cf0c55c43a3e0979..c9d9e3a8146f9c39c55b7e7c6ed8092213545359 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -777,6 +777,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h index b56b9a21836580565f22e30d6efcfe09b5d2b9e1..ab8ee1344e96609094d10b0d612863d8b5d73541 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h @@ -777,6 +777,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h index a4cddd40d2b964d3d225ae62745006b884cb8da0..1e4cfe38c655f6e5a4f1c54f710763d52ac2c7da 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h @@ -765,6 +765,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h index 846349e14598c673715c7d4b847c63e2d0c39f40..2fc4df580ee3f946a9c5662e205bc16d629cebab 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h @@ -778,6 +778,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points //#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -5.5 #define Z_PROBE_OFFSET_RANGE_MAX -3 diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h index 20f5d9166ee18a3f7750ee74e7021e74b25cf029..d1638c8e12ef8701875423e7940435764ab20fd9 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h @@ -765,6 +765,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h index 20db4def49b3023e52661054cf5352c1ef02fe2d..0ee435c57f8f200d0054086aae0c2300b32d4275 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration.h +++ b/Marlin/src/config/examples/Cartesio/Configuration.h @@ -776,6 +776,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h index a8f36efc9326b0356ec26f172253bf654a4e9979..e3d870de74517f85cf0972541d5820a5080a7162 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h @@ -787,6 +787,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h index 401c463b809394cb6e3137863217b3df01106ae6..0718b250d3a1552c1d096a2fd9fbd98e568772c9 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h index af44896ea552a15ab9b06050b95d940e5dc3ff3b..3e1264e483c2cb008a5a857c4e3f8416fdd8cdea 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h @@ -796,6 +796,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h index 0699cb20ec9166db47754853884f552331fa1201..60a77c0a9d55d9ea4c71c432a44ee8a2ac1590cb 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h @@ -787,6 +787,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h index 23b9ab9fb0b61dc6a75973fe4f509709f161db0f..d2e42decf6b89918f9efd742c2530ba4125e24ed 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h @@ -781,6 +781,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h index 097dadf499262ed4538e5e6b5c7519f86330308c..09dbb0e1333e565ec7074e0fbf3d572aa7843304 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h @@ -787,6 +787,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h index 4fd8e0442abc8192ac4004dec1f66b5c0c65be03..545522045e5504efc140a9bb2f98851969c65b2d 100644 --- a/Marlin/src/config/examples/Felix/Configuration.h +++ b/Marlin/src/config/examples/Felix/Configuration.h @@ -759,6 +759,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h index 05b26851aadb19cb5bb7c84f4acdf2c4e355449d..17250f5242fcf058e9c60b55991f14592a8f2597 100644 --- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h +++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h @@ -759,6 +759,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index cc34bce6d905ab3cbada3c6e43d505e797b300e4..54a0495fdd65888ce91a31806ef388f41c92af6b 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -783,6 +783,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points //#define Z_AFTER_PROBING 3 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h index 9734cf7642723f15e79e8540f99122c45b5595fe..835517cb217b5269280fa0cf808f029c99613846 100644 --- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h @@ -792,6 +792,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index c6fce3aac171e1f9565a929e24ff0c3fce0a6876..33669e37d16e21b0c6f0151e0fb6479bb29efaf3 100644 --- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points //#define Z_AFTER_PROBING 6 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 665ca62359664f73dc5bdaf45cb73b9ec6c1e8cf..b4e227732ac66e397988f0b2676e5c7e64d11394 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -793,6 +793,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index ee95e0f0fb828fb345ecfd85d6db725ce83a8ca1..89a02442dc8538c80e59aed822bc94fe8437e7f9 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -792,6 +792,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h index 386c160084b0976454a6c707e174a950af03f55d..776e4d78b8158c651130987dbd3026aa30673e4f 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h @@ -781,6 +781,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h index 25be5f77faffa3b0f2dc88474e0b664d9bcee4b0..fdba3bbea7ebcc8612dc702a1a3b72c82d879e6c 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h @@ -789,6 +789,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h index 0364ddc1228cb047633b5c785affce79b403d334..cedbd546e2231100e1202fa63f67b86c9e9fca40 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration.h +++ b/Marlin/src/config/examples/MakerParts/Configuration.h @@ -797,6 +797,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h index 30f8baae85b95ebbfc10b138e47e1e1086570bb7..034e2bab1496b7563e2f94ceb8518c8b6e144a50 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h @@ -801,6 +801,8 @@ //#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset //#define Z_PROBE_OFFSET_RANGE_MIN -20 //#define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h index 2440c683f7134c131ffe0bc52c43d44052a55849..dac1f574d2732bebea68cead3edb3982416d17bb 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h @@ -776,6 +776,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index ba3cbd6bfdffce2d2136006518ae8eaffc1fc738..3b6942b98928625a63bebba0bf6902cbbab4dab8 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -781,6 +781,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 0a6b37fb536fa20605d0847ff139474b4c8d0c22..a254db2d8602e30c80bc66638b641c880a7c4beb 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -781,6 +781,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h index 1a0f89f18e83969d5794a771fd143b5d7dc36d61..08c6b856df5706db5c26cd96e790d1f32dd9b2d7 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h index a6e23e9f9a30f75b4f4d8ed41b1a30bfe90e525d..1f48ae435abf23a3fca43a2b0bc546bc9b12e09b 100644 --- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h +++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h @@ -817,6 +817,8 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h index c68671394270353aab018ae7970ee043d1c00b31..e0de50780f6f288253249db4a10aa8983386a117 100644 --- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h index c54eb327c4347e5fb5999d3bc6f901c0127b2888..62d21fcad7a1a754f411bd1fa955465d7f322c99 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration.h +++ b/Marlin/src/config/examples/RigidBot/Configuration.h @@ -775,6 +775,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h index 8559a1fd586524ef79310a5dc85fc5d1a04eb2bb..4c14be017316a48698539b3c5310f93d71492559 100644 --- a/Marlin/src/config/examples/SCARA/Configuration.h +++ b/Marlin/src/config/examples/SCARA/Configuration.h @@ -790,6 +790,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h index 4c28d11077bfadb27aa7fa44220a3aadbaf6a225..ed00628c0c317c3010f3c9402ffc4b8e2a706a4a 100644 --- a/Marlin/src/config/examples/STM32F10/Configuration.h +++ b/Marlin/src/config/examples/STM32F10/Configuration.h @@ -780,6 +780,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h index 216a38a66e93058f3451b842781ad056494302c5..f0de939a66a757008506597253780128a581ad5a 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h @@ -808,6 +808,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h index 7eb86c40ef9d42e0183dc94e0fb395f2a04144a5..015c685c2ccadd6208934c29c082095a52e36c78 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration.h +++ b/Marlin/src/config/examples/TheBorg/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h index 5634bf8af65eafeacadf680b8026841150e18dc0..3e6a8c5d6a71ffd26a77fb65651dcd43dab7ef6e 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h @@ -828,6 +828,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index d31820465f9c9844390173df3fcf6bf819b6df96..4cd2255acb72e9b9a65dde88d2fce36d7c068e48 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h index a3e2087166834696798265c8fc13a23546a3f70e..291d7fdf955f0c9e13e24c8155c95ecc98d2d992 100644 --- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h index 1ee899b4372ad5daa450b99211de8362a73505f0..6fee980eb5adfa02cea3b9527baf43f3ad36cddb 100644 --- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h @@ -788,6 +788,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h index 80cc23319837c9f59fb61746875c5c47fb0e12cd..c357c13a7ea4840b780b940761d318162c5d7eb1 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h index d5e6951d22d09f1b443a30c0d000116a0df2cdcc..0e92c34d36bfe5c257fb21e626f1ce35f248d02b 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h @@ -806,6 +806,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h index 73fc71700b4a161654dd79ed3c0ce9c243f6ab10..4b4be502eb081ed3664107d50063849a5f3e1318 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h index adad995a95265602936bea9972b1c6b03f226ff8..03f4831fb065dc9032d601e44d6e0ffa8e199fa7 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h index 4dd47337cabe5288fd621d480ca80d11467a1d56..23ced8f3058b4cfa87b2471a89f6b653d31b8bb9 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -787,6 +787,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h index ea98002d7366415f8caedb914770488d256b7ffc..02af2438bce25dd938d2c30fb1df64ef94118b61 100644 --- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h +++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h @@ -777,6 +777,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index c491de931458ba7268d06376f1c74fb1478c76b6..17e6d888f361755a601068677404bf73d739de1f 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -907,6 +907,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points //#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h index 7aff5c1d4934d135c2b6806ea77b53e5c6d6b501..b63d1c595e2962c77b4c389ec76567c2719a9ac3 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h @@ -907,6 +907,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points //#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index d9462d97e7dcca559240fd17163ff3828bc94b0a..f48ca4cfea312dd411931b9e6d9ee21f23005aea 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -907,6 +907,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h index 8a712ed8ef025dc82ab844d9eb29dbf7ab814b47..37d5c4236f5dc400984d6024fcf355397ac9bad4 100644 --- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -909,6 +909,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 41869b1b6f0c869cd946945cac69ca5488072aa2..e76648db323ddbfb439f9abc078da0dabc56afef 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -894,6 +894,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 008d80810d60c2e440d973aa1f60e8c575dea05a..93cf1a8c58bb1b1dfe20c5a3f9dd16832f15afa7 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -897,6 +897,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index aceecacd6ecef1fe7841bc07493e7e2dd428d241..f6ffad1c56ffd1ca377de5b5d307d4f613bedeef 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -896,6 +896,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -15 diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index a72a0d050f9b457e39d69d2a7327cba87f2a527d..4997a8aa14de802488031e9d5a3732285b1d9d4c 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -906,6 +906,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points //#define Z_AFTER_PROBING 10 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index ea03b63ed0cbebe580e9398e2a0b7fd0930fb989..2391a686e6a2ad8ccb69e6fcfba948f698546021 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -790,6 +790,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points //#define Z_AFTER_PROBING 6 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h index 96a895a22c915c7e5f6dcb2bb3e13b2a6de44be7..0ec0b635c149775acceda9b6ff63e39b6b8d2e32 100644 --- a/Marlin/src/config/examples/makibox/Configuration.h +++ b/Marlin/src/config/examples/makibox/Configuration.h @@ -780,6 +780,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h index 0f3780d361c513843119d75fc2c7d4c50ad9923b..d8dec87f81618eedb335f452157bcf364c56a097 100644 --- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h +++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h @@ -778,6 +778,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h index ca26a4c3ecb27915a3d22db1cc3785877a8f3c83..f088255f4cabc28844fea5bc9aecd4de4a05dffb 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h @@ -772,6 +772,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index 758a4dea8743b91defea29f8f6a8d33d52f3cc69..40efe5912df3d6be00042d4b844f8cfe70987260 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -782,6 +782,8 @@ #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points //#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20