From 824f3c1c0d131de5b6e1bf88c7b508e9dee23732 Mon Sep 17 00:00:00 2001 From: Scott Lahteine <sourcetree@thinkyhead.com> Date: Sat, 8 Apr 2017 02:49:40 -0500 Subject: [PATCH] Fix up configuration comments --- Marlin/Configuration.h | 10 +++++----- Marlin/example_configurations/Cartesio/Configuration.h | 10 +++++----- Marlin/example_configurations/Felix/Configuration.h | 10 +++++----- .../example_configurations/Felix/DUAL/Configuration.h | 10 +++++----- .../example_configurations/Hephestos/Configuration.h | 10 +++++----- .../example_configurations/Hephestos_2/Configuration.h | 10 +++++----- Marlin/example_configurations/K8200/Configuration.h | 10 +++++----- Marlin/example_configurations/K8400/Configuration.h | 10 +++++----- .../K8400/Dual-head/Configuration.h | 10 +++++----- .../RepRapWorld/Megatronics/Configuration.h | 10 +++++----- Marlin/example_configurations/RigidBot/Configuration.h | 10 +++++----- Marlin/example_configurations/SCARA/Configuration.h | 10 +++++----- Marlin/example_configurations/TAZ4/Configuration.h | 10 +++++----- Marlin/example_configurations/TinyBoy2/Configuration.h | 10 +++++----- Marlin/example_configurations/WITBOX/Configuration.h | 10 +++++----- .../adafruit/ST7565/Configuration.h | 10 +++++----- .../delta/flsun_kossel_mini/Configuration.h | 10 +++++----- .../delta/generic/Configuration.h | 10 +++++----- .../delta/kossel_mini/Configuration.h | 10 +++++----- .../delta/kossel_pro/Configuration.h | 10 +++++----- .../delta/kossel_xl/Configuration.h | 10 +++++----- Marlin/example_configurations/makibox/Configuration.h | 10 +++++----- .../tvrrug/Round2/Configuration.h | 10 +++++----- 23 files changed, 115 insertions(+), 115 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c9e54c59df..251991a2af 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 20b1e495a0..4f451dff86 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -595,7 +595,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -622,16 +622,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index a124a5112e..95a8da48a6 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -579,7 +579,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -606,16 +606,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index d4f4e94637..b01a1c1440 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -579,7 +579,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -606,16 +606,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 8352c2ebc0..a3a89535a1 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -587,7 +587,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -614,16 +614,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 3a48bb0397..cb7166891a 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -590,7 +590,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -617,16 +617,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 632fcf9bbe..6c91924e15 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -625,7 +625,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -652,16 +652,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 6e9128649f..ee7c8c3f72 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 4c83230a9a..ef7606ebc4 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index cc55485632..7ab7f01269 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 084b687829..642a7c6e6c 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -595,7 +595,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -622,16 +622,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index a0526e18f5..d36c0b53a9 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -611,7 +611,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -638,16 +638,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 458809ec10..a6499369d8 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -616,7 +616,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -643,16 +643,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index ed78b74517..e5b2ab3a59 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -647,7 +647,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -674,16 +674,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index eea8a48bfb..1e7902b573 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -587,7 +587,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -614,16 +614,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 4ee1e54a12..30b7a5dd54 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h index b23be9c14c..3313a4d8d6 100644 --- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h @@ -654,7 +654,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -681,16 +681,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.25 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 2000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing #define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 56210c2b37..56f507ce0f 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -641,7 +641,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -668,16 +668,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 649f1f64a0..250f7a0e07 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -634,7 +634,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -661,16 +661,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index badea5b730..d4a30a7f1a 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -635,7 +635,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -665,16 +665,16 @@ * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. */ #define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25 // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero). -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index f33c23837b..d7b96be0be 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -654,7 +654,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -681,16 +681,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!) -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 598fefbeae..942949eb59 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -599,7 +599,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -626,16 +626,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 74b984fa99..06ede26576 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -592,7 +592,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -619,16 +619,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** -- GitLab