diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c9e54c59df5c837fe31f0926abcd7fce63d43038..251991a2afc41851d949696ddbbbc6d1522edac8 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 20b1e495a01ed5c08d15e55428933d196ef9d5fb..4f451dff86ca0701574e5566526f69f745f90894 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -595,7 +595,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -622,16 +622,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index a124a5112e839d209f093ab6badcabda51d0119f..95a8da48a62f173f08bd13c5687446742bd16740 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -579,7 +579,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -606,16 +606,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index d4f4e946378a77cb59807f9998cd6b222e8ded93..b01a1c144081f59d57c60d3bd3004c0a0bcf50e5 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -579,7 +579,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -606,16 +606,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 8352c2ebc062f392d8ea7160cf0220836cb2aa7b..a3a89535a120260eb4b0a96bcaec191d6c77f869 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -587,7 +587,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -614,16 +614,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 3a48bb039754154f70bc0f1472eedbb165ff6643..cb7166891a2d8e511a6867704345df1a5a4fa9c3 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -590,7 +590,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -617,16 +617,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 632fcf9bbea2106f19cb104632366f210b4d0062..6c91924e1574fbf467aad8236d7054af0acff3e9 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -625,7 +625,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -652,16 +652,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 6e9128649f4d817243c66a38d7623d9fb64948a8..ee7c8c3f7216a02a4656d97abad9555b928f6313 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 4c83230a9a0545cabbbbdc959796ecda505e9616..ef7606ebc43721d06e887ec5419002d5f17c8c5a 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index cc5548563212cbd2fcc8cf71746ac41df8c78afd..7ab7f01269129fd1fef359aededecf3ffe7ef48b 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 084b687829e48a61b68c423e29992e6a58faab18..642a7c6e6c1b66ef120d2d1755b7eed6967d4a2d 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -595,7 +595,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -622,16 +622,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index a0526e18f5c8731a70dded67412b66e6e64d1b9d..d36c0b53a95dc0dbe4bb288d9870678e78bd7b20 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -611,7 +611,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -638,16 +638,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 458809ec108c27d9357c080ead62e3ee058dc298..a6499369d8d0363dca2caf482dcc6b1212536787 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -616,7 +616,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -643,16 +643,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index ed78b745178aee9a583664bb2f6d24ba7c9cc6b9..e5b2ab3a596ac02a1c20abe31ff9b10a68b82070 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -647,7 +647,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -674,16 +674,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index eea8a48bfb5a6af1e7ea56807431e6e0d9a65648..1e7902b57309fc6efcad73bc1b1a42ef292e06d1 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -587,7 +587,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -614,16 +614,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 4ee1e54a12164438f41d2ff260ba70e6b0deef01..30b7a5dd54ddcec0337cf2aca47411cbc17f895a 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -596,7 +596,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -623,16 +623,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h index b23be9c14c5257bd9adb55dbf5872ccd534f56e0..3313a4d8d6f1ee1bd9291f5b753b8c41f44d9dd5 100644 --- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h @@ -654,7 +654,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -681,16 +681,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.25 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 2000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing #define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 56210c2b3703a4f4e01ab4813045e0b187963aee..56f507ce0f0bc2a0f7f1ff2b0c5ac7dfc8e24e48 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -641,7 +641,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -668,16 +668,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 649f1f64a0fc576a01da0ceded99f0deea7d8f8b..250f7a0e0737400e43f19fd0afbc84ba9a608677 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -634,7 +634,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -661,16 +661,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index badea5b730fee31016e333d72b0ad7a185b0618d..d4a30a7f1a4c87822e07089952edd193e8d4fb06 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -635,7 +635,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -665,16 +665,16 @@ * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. */ #define Z_PROBE_OFFSET_FROM_EXTRUDER -17.25 // Increase this if the first layer is too thin (remember: it's a negative number so increase means closer to zero). -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index f33c23837beca00ef8152f4120202ca95ccaa450..d7b96be0be43118daf331811b613be87920c6925 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -654,7 +654,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -681,16 +681,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER 0.0 // Z probe to nozzle Y offset: -front +behind #define Z_PROBE_OFFSET_FROM_EXTRUDER 0.3 // Z probe to nozzle Z offset: -below (always!) -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 598fefbeae814c13da2039017ba612ef651b3596..942949eb594339986a1c31977d35d5aadda7fad2 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -599,7 +599,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -626,16 +626,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /** diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 74b984fa9907a8f256e2f2c724747bfe91abc81d..06ede265762446865fc7e0c06bbebbfa928f7a93 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -592,7 +592,7 @@ * is enabled then it also applies to Z_PROBE_SPEED_SLOW. */ -/* Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. */ +// Enable if you have a Z probe mounted on a sled like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -619,16 +619,16 @@ #define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle] -/* X and Y axis travel speed (mm/m) between probes */ +// X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -/* Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) */ +// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -/* Speed for the "accurate" probe of each point */ +// Speed for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) -/* Use double touch for probing */ +// Use double touch for probing //#define PROBE_DOUBLE_TOUCH /**