diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
index b0c567357924889d49ac6f836a79b75a5af4f8e5..92feef321833a7f430e4ecd926eac32b1e3a5ddd 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
@@ -187,7 +187,7 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
- #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
+ #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue."
#define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE PB6
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h
index 7adce168dc0204ed518f91ef38d9acf6595a64b2..a5141ac27fe934f3fee5c4ac1997368a03de089a 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_0.h
@@ -21,7 +21,7 @@
*/
#pragma once
-#include "pins_BTT_SKR_MINI_E3.h"
+#include "pins_BTT_SKR_MINI_E3_common.h"
#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.0"
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h
index 5d649bce7f69057ad2a023f99ec9074454d807a9..829975861aa0b8df4b9e56a6fffb1b35d7f7d71d 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h
@@ -21,7 +21,7 @@
*/
#pragma once
-#include "pins_BTT_SKR_MINI_E3.h"
+#include "pins_BTT_SKR_MINI_E3_common.h"
#define BOARD_INFO_NAME "BTT SKR Mini E3 V1.2"
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h
index 57d964ee2080b2ef45c70fa0e37294a12e39ea33..d6ca37942cfc2c89e8bbbbf1f7a4482303240c46 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h
@@ -30,7 +30,7 @@
#undef NO_EEPROM_SELECTED
#endif
-#include "pins_BTT_SKR_MINI_E3.h"
+#include "pins_BTT_SKR_MINI_E3_common.h"
#define BOARD_INFO_NAME "BTT SKR Mini E3 V2.0"
diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
similarity index 97%
rename from Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h
rename to Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
index 951d83baba834016381f54e035b06a24999cc76f..6d8100e5d14372ec36041c5ce0fc5e06fd366cd8 100644
--- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h
+++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
@@ -145,7 +145,7 @@
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
- #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
+ #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue."
#define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE EXP1_9
@@ -177,7 +177,7 @@
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
- #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
+ #error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue."
/** FYSETC TFT TFT81050 display pinout
*
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h
index abb6d26c09d9080c8a1ce0a3239f10b60127e8c6..46c80e9b63b6baf84c9d70e07f1b89cb455739e4 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3.h
@@ -22,172 +22,15 @@
#pragma once
/**
- * MKS Robin E3D (STM32F103RCT6) board pin assignments
+ * MKS Robin E3 (STM32F103RCT6) board pin assignments
*/
-#ifndef __STM32F1__
- #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
-#elif HOTENDS > 1 || E_STEPPERS > 1
- #error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
+#if HOTENDS > 1 || E_STEPPERS > 1
+ #error "MKS Robin E3 supports up to 1 hotends / E-steppers. Comment out this line to continue."
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "MKS Robin E3"
#endif
-#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
-//#define DISABLE_DEBUG
-#define DISABLE_JTAG
-#define ENABLE_SPI2
-
-//
-// EEPROM
-//
-#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
- #define FLASH_EEPROM_EMULATION
- #define EEPROM_PAGE_SIZE (0x800U) // 2KB
- #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
- #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
-#endif
-
-//
-// Servos
-//
-#define SERVO0_PIN PA3
-
-//
-// Limit Switches
-//
-#define X_STOP_PIN PA12
-#define Y_STOP_PIN PA11
-#define Z_MIN_PIN PC6
-#define Z_MAX_PIN PB1
-
-//
-// Steppers
-//
-#define X_STEP_PIN PC0
-#define X_DIR_PIN PB2
-#define X_ENABLE_PIN PC13
-
-#define Y_STEP_PIN PC2
-#define Y_DIR_PIN PB9
-#define Y_ENABLE_PIN PB12
-
-#define Z_STEP_PIN PB7
-#define Z_DIR_PIN PB6
-#define Z_ENABLE_PIN PB8
-
-#define E0_STEP_PIN PB4
-#define E0_DIR_PIN PB3
-#define E0_ENABLE_PIN PB5
-
-#if HAS_TMC220x
- /**
- * TMC2208/TMC2209 stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- //#define X_HARDWARE_SERIAL Serial1
- //#define Y_HARDWARE_SERIAL Serial1
- //#define Z_HARDWARE_SERIAL Serial1
- //#define E0_HARDWARE_SERIAL Serial1
-
- //
- // Software serial
- //
- #define X_SERIAL_TX_PIN PC7
- #define X_SERIAL_RX_PIN PC7
-
- #define Y_SERIAL_TX_PIN PD2
- #define Y_SERIAL_RX_PIN PD2
-
- #define Z_SERIAL_TX_PIN PC12
- #define Z_SERIAL_RX_PIN PC12
-
- #define E0_SERIAL_TX_PIN PC11
- #define E0_SERIAL_RX_PIN PC11
-
- // Reduce baud rate to improve software serial reliability
- #define TMC_BAUD_RATE 19200
-#endif
-
-//
-// Heaters 0,1 / Fans / Bed
-//
-#define HEATER_0_PIN PC9
-#define FAN_PIN PA8
-#define HEATER_BED_PIN PC8
-
-//
-// Temperature Sensors
-//
-#define TEMP_BED_PIN PA1 // TB
-#define TEMP_0_PIN PA0 // TH1
-
-#define FIL_RUNOUT_PIN PB10 // MT_DET
-
-/**
- * _____ _____ _____
- * (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
- * (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
- * (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)
- * (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1)
- * GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER)
- * ----- ----- -----
- * EXP1 EXP2 EXP3
- */
-#if HAS_SPI_LCD
-
- #define BEEPER_PIN PC1
- #define BTN_ENC PC3
- #define LCD_PINS_ENABLE PA4
- #define LCD_PINS_RS PA5
- #define BTN_EN1 PB11
- #define BTN_EN2 PB0
-
- // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
- #if ENABLED(MKS_MINI_12864)
-
- #define LCD_BACKLIGHT_PIN -1
- #define LCD_RESET_PIN -1
- #define DOGLCD_A0 PC4
- #define DOGLCD_CS PA7
- #define DOGLCD_SCK PB13
- #define DOGLCD_MOSI PB15
-
- #undef SHOW_BOOTSCREEN
-
- #else
-
- #define LCD_PINS_D4 PA6
- #if ENABLED(ULTIPANEL)
- #define LCD_PINS_D5 PA7
- #define LCD_PINS_D6 PC4
- #define LCD_PINS_D7 PC5
- #endif
-
- #endif // !MKS_MINI_12864
-
-#endif // HAS_SPI_LCD
-
-//
-// SD Card
-//
-#define ENABLE_SPI2
-#define SD_DETECT_PIN PC10
-#define SCK_PIN PB13
-#define MISO_PIN PB14
-#define MOSI_PIN PB15
-#define SS_PIN PA15
-
-#ifndef ST7920_DELAY_1
- #define ST7920_DELAY_1 DELAY_NS(125)
-#endif
-#ifndef ST7920_DELAY_2
- #define ST7920_DELAY_2 DELAY_NS(125)
-#endif
-#ifndef ST7920_DELAY_3
- #define ST7920_DELAY_3 DELAY_NS(125)
-#endif
+#include "pins_MKS_ROBIN_E3_common.h"
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h
index 8f0ecd09f5980fee31a15a0e441ffb0966ec6dba..0b8a44327a725eb56e0bbcb6801aa2b99a8a39f0 100644
--- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3D.h
@@ -25,71 +25,26 @@
* MKS Robin E3D (STM32F103RCT6) board pin assignments
*/
-#ifndef __STM32F1__
- #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
-#elif HOTENDS > 1 || E_STEPPERS > 1
+#if HOTENDS > 1 || E_STEPPERS > 1
#error "MKS Robin E3D supports up to 1 hotends / E-steppers. Comment out this line to continue."
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "MKS Robin E3D"
#endif
-#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
-
-//#define DISABLE_DEBUG
-#define DISABLE_JTAG
-#define ENABLE_SPI2
-
-//
-// EEPROM
-//
-#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
- #define FLASH_EEPROM_EMULATION
- #define EEPROM_PAGE_SIZE (0x800U) // 2KB
- #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
- #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
-#endif
-
-//
-// Servos
-//
-#define SERVO0_PIN PA3
-
-//
-// Limit Switches
-//
-#define X_STOP_PIN PA12
-#define Y_STOP_PIN PA11
-#define Z_MIN_PIN PC6
-#define Z_MAX_PIN PB1
//
// Steppers
//
-#define X_STEP_PIN PC0
-#define X_DIR_PIN PB2
-#define X_ENABLE_PIN PC13
#ifndef X_CS_PIN
#define X_CS_PIN PC7
#endif
-
-#define Y_STEP_PIN PC2
-#define Y_DIR_PIN PB9
-#define Y_ENABLE_PIN PB12
#ifndef Y_CS_PIN
#define Y_CS_PIN PD2
#endif
-
-#define Z_STEP_PIN PB7
-#define Z_DIR_PIN PB6
-#define Z_ENABLE_PIN PB8
#ifndef Z_CS_PIN
#define Z_CS_PIN PC12
#endif
-
-#define E0_STEP_PIN PB4
-#define E0_DIR_PIN PB3
-#define E0_ENABLE_PIN PB5
#ifndef E0_CS_PIN
#define E0_CS_PIN PC11
#endif
@@ -109,112 +64,4 @@
#endif
#endif
-#if HAS_TMC220x
- /**
- * TMC2208/TMC2209 stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- //#define X_HARDWARE_SERIAL Serial1
- //#define Y_HARDWARE_SERIAL Serial1
- //#define Z_HARDWARE_SERIAL Serial1
- //#define E0_HARDWARE_SERIAL Serial1
-
- //
- // Software serial
- //
- #define X_SERIAL_TX_PIN PC7
- #define X_SERIAL_RX_PIN PC7
-
- #define Y_SERIAL_TX_PIN PD2
- #define Y_SERIAL_RX_PIN PD2
-
- #define Z_SERIAL_TX_PIN PC12
- #define Z_SERIAL_RX_PIN PC12
-
- #define E0_SERIAL_TX_PIN PC11
- #define E0_SERIAL_RX_PIN PC11
-
- // Reduce baud rate to improve software serial reliability
- #define TMC_BAUD_RATE 19200
-#endif
-
-//
-// Heaters 0,1 / Fans / Bed
-//
-#define HEATER_0_PIN PC9
-#define FAN_PIN PA8
-#define HEATER_BED_PIN PC8
-
-//
-// Temperature Sensors
-//
-#define TEMP_BED_PIN PA1 //TB
-#define TEMP_0_PIN PA0 //TH1
-
-#define FIL_RUNOUT_PIN PB10 // MT_DET
-
-/**
- * _____ _____ _____
- * (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
- * (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
- * (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)
- * (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1)
- * GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER)
- * ----- ----- -----
- * EXP1 EXP2 EXP3
- */
-#if HAS_SPI_LCD
-
- #define BEEPER_PIN PC1
- #define BTN_ENC PC3
- #define LCD_PINS_ENABLE PA4
- #define LCD_PINS_RS PA5
- #define BTN_EN1 PB11
- #define BTN_EN2 PB0
-
- // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
- #if ENABLED(MKS_MINI_12864)
-
- #define LCD_BACKLIGHT_PIN -1
- #define LCD_RESET_PIN -1
- #define DOGLCD_A0 PC4
- #define DOGLCD_CS PA7
- #define DOGLCD_SCK PB13
- #define DOGLCD_MOSI PB15
-
- #undef SHOW_BOOTSCREEN
-
- #else
-
- #define LCD_PINS_D4 PA6
- #if ENABLED(ULTIPANEL)
- #define LCD_PINS_D5 PA7
- #define LCD_PINS_D6 PC4
- #define LCD_PINS_D7 PC5
- #endif
-
- #endif // !MKS_MINI_12864
-
-#endif // HAS_SPI_LCD
-
-//
-// SD Card
-//
-#define ENABLE_SPI2
-#define SD_DETECT_PIN PC10
-#define SCK_PIN PB13
-#define MISO_PIN PB14
-#define MOSI_PIN PB15
-#define SS_PIN PA15
-
-#ifndef ST7920_DELAY_1
- #define ST7920_DELAY_1 DELAY_NS(125)
-#endif
-#ifndef ST7920_DELAY_2
- #define ST7920_DELAY_2 DELAY_NS(125)
-#endif
-#ifndef ST7920_DELAY_3
- #define ST7920_DELAY_3 DELAY_NS(125)
-#endif
+#include "pins_MKS_ROBIN_E3_common.h"
diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
new file mode 100644
index 0000000000000000000000000000000000000000..25d954f0f09194a541a3632d4119bb597770a8d0
--- /dev/null
+++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
@@ -0,0 +1,188 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * MKS Robin E3 & E3D (STM32F103RCT6) common board pin assignments
+ */
+
+#ifndef __STM32F1__
+ #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
+
+//#define DISABLE_DEBUG
+#define DISABLE_JTAG
+#define ENABLE_SPI2
+
+//
+// EEPROM
+//
+#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
+ #define FLASH_EEPROM_EMULATION
+ #define EEPROM_PAGE_SIZE (0x800U) // 2KB
+ #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
+ #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
+#endif
+
+//
+// Servos
+//
+#define SERVO0_PIN PA3
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN PA12
+#define Y_STOP_PIN PA11
+#define Z_MIN_PIN PC6
+#define Z_MAX_PIN PB1
+
+//
+// Steppers
+//
+#define X_STEP_PIN PC0
+#define X_DIR_PIN PB2
+#define X_ENABLE_PIN PC13
+
+#define Y_STEP_PIN PC2
+#define Y_DIR_PIN PB9
+#define Y_ENABLE_PIN PB12
+
+#define Z_STEP_PIN PB7
+#define Z_DIR_PIN PB6
+#define Z_ENABLE_PIN PB8
+
+#define E0_STEP_PIN PB4
+#define E0_DIR_PIN PB3
+#define E0_ENABLE_PIN PB5
+
+#if HAS_TMC220x
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+
+ //
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN PC7
+ #define X_SERIAL_RX_PIN PC7
+
+ #define Y_SERIAL_TX_PIN PD2
+ #define Y_SERIAL_RX_PIN PD2
+
+ #define Z_SERIAL_TX_PIN PC12
+ #define Z_SERIAL_RX_PIN PC12
+
+ #define E0_SERIAL_TX_PIN PC11
+ #define E0_SERIAL_RX_PIN PC11
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// Heaters 0,1 / Fans / Bed
+//
+#define HEATER_0_PIN PC9
+#define FAN_PIN PA8
+#define HEATER_BED_PIN PC8
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN PA1 // TB
+#define TEMP_0_PIN PA0 // TH1
+
+#define FIL_RUNOUT_PIN PB10 // MT_DET
+
+/**
+ * _____ _____ _____
+ * (BEEPER) PC1 | 1 2 | PC3 (BTN_ENC) (MISO) PB14 | 1 2 | PB13 (SD_SCK) 5V | 1 2 | GND
+ * (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS) (BTN_EN1) PB11 | 3 4 | PA15 (SD_SS) (LCD_EN) PA4 | 3 4 | PA5 (LCD_RS)
+ * (LCD_D4) PA6 | 5 6 PA7 (LCD_D5) (BTN_EN2) PB0 | 5 6 PB15 (SD_MOSI) (LCD_D4) PA6 | 5 6 PB0 (BTN_EN2)
+ * (LCD_D6) PC4 | 7 8 | PC5 (LCD_D7) (SD_DETECT) PC10 | 7 8 | RESET RESET | 7 8 | PB11 (BTN_EN1)
+ * GND | 9 10| 5V GND | 9 10| NC (BTN_ENC) PC3 | 9 10| PC1 (BEEPER)
+ * ----- ----- -----
+ * EXP1 EXP2 EXP3
+ */
+#if HAS_SPI_LCD
+
+ #define BEEPER_PIN PC1
+ #define BTN_ENC PC3
+ #define LCD_PINS_ENABLE PA4
+ #define LCD_PINS_RS PA5
+ #define BTN_EN1 PB11
+ #define BTN_EN2 PB0
+
+ // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
+ #if ENABLED(MKS_MINI_12864)
+
+ #define LCD_BACKLIGHT_PIN -1
+ #define LCD_RESET_PIN -1
+ #define DOGLCD_A0 PC4
+ #define DOGLCD_CS PA7
+ #define DOGLCD_SCK PB13
+ #define DOGLCD_MOSI PB15
+
+ #undef SHOW_BOOTSCREEN
+
+ #else
+
+ #define LCD_PINS_D4 PA6
+ #if ENABLED(ULTIPANEL)
+ #define LCD_PINS_D5 PA7
+ #define LCD_PINS_D6 PC4
+ #define LCD_PINS_D7 PC5
+ #endif
+
+ #endif // !MKS_MINI_12864
+
+#endif // HAS_SPI_LCD
+
+//
+// SD Card
+//
+#define ENABLE_SPI2
+#define SD_DETECT_PIN PC10
+#define SCK_PIN PB13
+#define MISO_PIN PB14
+#define MOSI_PIN PB15
+#define SS_PIN PA15
+
+#ifndef ST7920_DELAY_1
+ #define ST7920_DELAY_1 DELAY_NS(125)
+#endif
+#ifndef ST7920_DELAY_2
+ #define ST7920_DELAY_2 DELAY_NS(125)
+#endif
+#ifndef ST7920_DELAY_3
+ #define ST7920_DELAY_3 DELAY_NS(125)
+#endif