diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index aea9656971b808e4a16f317ab86b2403e3eda629..51a6b4508b4d5b224f3a30c0592fbc0469938623 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -840,8 +840,8 @@
 
   // Define the pin to read during calibration
   #ifndef CALIBRATION_PIN
-    #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
-    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
+    //#define CALIBRATION_PIN -1            // Define here to override the default pin
+    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
     //#define CALIBRATION_PIN_PULLDOWN
     #define CALIBRATION_PIN_PULLUP
   #endif
diff --git a/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp b/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
index c7b7007053ac567273b61e3e9c55c97a3202d58e..9263079358636bcda74ba9600327e928221c4486 100644
--- a/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
+++ b/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
@@ -1,3 +1,24 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 
 /* EEPROM emulation over flash with reduced wear
  *
diff --git a/Marlin/src/gcode/calibrate/G425.cpp b/Marlin/src/gcode/calibrate/G425.cpp
index c0a410fcc4264ce195f6c566740f7c006e318c6e..d2db4ce308699d1c0c77d557bdcfd20bfef59aea 100644
--- a/Marlin/src/gcode/calibrate/G425.cpp
+++ b/Marlin/src/gcode/calibrate/G425.cpp
@@ -128,13 +128,15 @@ inline void park_above_object(measurements_t &m, const float uncertainty) {
 #endif
 
 inline bool read_calibration_pin() {
-  #if HAS_CALIBRATION_PIN
-    return (READ(CALIBRATION_PIN) != CALIBRATION_PIN_INVERTING);
-  #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-    return (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING);
-  #else
-    return (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING);
-  #endif
+  return (
+    #if PIN_EXISTS(CALIBRATION)
+      READ(CALIBRATION_PIN) != CALIBRATION_PIN_INVERTING
+    #elif HAS_CUSTOM_PROBE_PIN
+      READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING
+    #else
+      READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING
+    #endif
+  );
 }
 
 /**
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
index 3b8393dafedb330aeeb4e07007e15eae61e16c25..ef7df41a1c68576a2d88c83f07ce2ec2d63bc3cc 100644
--- a/Marlin/src/inc/Conditionals_post.h
+++ b/Marlin/src/inc/Conditionals_post.h
@@ -1443,7 +1443,6 @@
 #define HAS_Z4_MIN (PIN_EXISTS(Z4_MIN))
 #define HAS_Z4_MAX (PIN_EXISTS(Z4_MAX))
 #define HAS_Z_MIN_PROBE_PIN (HAS_CUSTOM_PROBE_PIN && PIN_EXISTS(Z_MIN_PROBE))
-#define HAS_CALIBRATION_PIN (PIN_EXISTS(CALIBRATION))
 
 //
 // ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)
diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h
index 5b7aeb9c56db1a4487920411f6a9746be6def80a..5ddc72df17da8d8ce6ce55f13e515984c4fdc4b0 100644
--- a/Marlin/src/lcd/language/language_tr.h
+++ b/Marlin/src/lcd/language/language_tr.h
@@ -1,4 +1,4 @@
- /**
+/**
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp
index 47ccc5d5676ce31c3d4332124a3d62c8d8c8826d..f3f73f3da11a967bb888cef7c7a1285ff47eb4ed 100644
--- a/Marlin/src/module/endstops.cpp
+++ b/Marlin/src/module/endstops.cpp
@@ -256,7 +256,7 @@ void Endstops::init() {
     #endif
   #endif
 
-  #if HAS_CALIBRATION_PIN
+  #if PIN_EXISTS(CALIBRATION)
     #if ENABLED(CALIBRATION_PIN_PULLUP)
       SET_INPUT_PULLUP(CALIBRATION_PIN);
     #elif ENABLED(CALIBRATION_PIN_PULLDOWN)
diff --git a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h
index 6238b825884953119b70118cff27fd44c59881df..69fb2a3dfc52aa36f6142d1d432cdd830f4a1a79 100644
--- a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h
+++ b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h
@@ -1,3 +1,25 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
 /**
  * CNControls V15 for HMS434 with DUE pin assignments
  */
@@ -92,6 +114,10 @@
 //#define PWM_2_PIN          13
 //#define SPARE_IO           17
 #define BEEPER_PIN         13
-#define CALIBRATION_PIN    66
 #define STAT_LED_BLUE_PIN  -1
 #define STAT_LED_RED_PIN   31
+
+// G425 CALIBRATION_GCODE default pin
+#ifndef CALIBRATION_PIN
+  #define CALIBRATION_PIN  66
+#endif