diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 44f2f96dd0d8672e277a3353c81923e6584b0aaa..fd41e9d0dc953d7019c8136fd304f59f2a62df9f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -393,12 +393,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/configurator/config/Configuration_adv.h b/Marlin/configurator/config/Configuration_adv.h index b03d42a612f6f6da4f3162c490e9ebc2a6e36639..1119e51814f948a6186b7cce7d2b90e7e38ccc31 100644 --- a/Marlin/configurator/config/Configuration_adv.h +++ b/Marlin/configurator/config/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 244ec0652dadfa8b5d00f00a93e5a1e924a700b4..678ebbe0833d9ac0c835e54aa059481234adbc13 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 6d5102ca46b814ab84b81e9f8d413c58e187b344..e1ec3fa6a76896560d1077e8971ed52576363c61 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 244ec0652dadfa8b5d00f00a93e5a1e924a700b4..678ebbe0833d9ac0c835e54aa059481234adbc13 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 60a58797cd5deed8dc181e2d63d15ee966184a6a..af4429b7e66284ee01500851c4bd19641f2ec26e 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 6382b6c1ee53c9f258cd1765de347df1454d511c..da2281eaf8d00faadb1e858e97444cb0b1bc03b6 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h index e5e3a11fd67304dff3fc26878da701e73b9a97d0..e193015cc36d5430a91bb37070a78eaf4d3fb34b 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h @@ -402,12 +402,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 4f2b114548f56ecbdbbd798d7787e07c3b47f600..a003186d81be1ac8c4b7ea74fec6c6e12a7c7c29 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -402,12 +402,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index f4cb49222ac656af670502054f8875d6a004b7a3..c8ac659c327205663f91ae2737808f93c81c7f78 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 7d33bd9eee804a89051df5b9e6a971c03d01999f..b08e8bc2ff1de9d2e7ae661a391d4081ae5a9db5 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 2747e00982b7be3c00e65d6de59dc308149605f7..a86b3279d49d4e915705ec03ed44af70a92a1549 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -401,12 +401,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define BUFSIZE 4 // Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients go after 30 seconds in a timeout. Some other clients start sending commands while receiving a 'wait'. -// This wait is only send when the buffer is empty. The timeout-length is in milliseconds. 1000 is a good value. -#define NO_TIMEOUTS 1000 +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK +//#define ADVANCED_OK // @section fwretract