diff --git a/Marlin/language.h b/Marlin/language.h
index 3268971ff12f9399bbc612dca5fda79c0fb96dea..15ebb98711c41e5d4862f75934713b1f808cbb27 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -114,6 +114,8 @@
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Change filament"
+ #define MSG_INIT_SDCARD "Init. SD-Card"
+ #define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages
@@ -259,6 +261,7 @@
#define MSG_NO_CARD "Brak karty"
#define MSG_DWELL "Uspij..."
#define MSG_USERWAIT "Czekaj na uzytkownika..."
+ #define MSG_RESUMING "Wznawiam drukowanie"
#define MSG_NO_MOVE "Brak ruchu."
#define MSG_PART_RELEASE "Czesciowe zwolnienie"
#define MSG_KILLED "Ubity. "
@@ -985,88 +988,83 @@
#define WELCOME_MSG MACHINE_NAME " Pronto."
#define MSG_SD_INSERTED "SD Card inserita"
#define MSG_SD_REMOVED "SD Card rimossa"
- #define MSG_MAIN " Menu principale \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disabilita Motori Passo-Passo"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Imposta Origini Assi"
- #define MSG_PREHEAT_PLA " Preriscalda PLA"
- #define MSG_PREHEAT_PLA_SETTINGS " Impostazioni Preriscaldamento PLA"
- #define MSG_PREHEAT_ABS " Preriscalda ABS"
- #define MSG_PREHEAT_ABS_SETTINGS " Impostazioni Preriscaldamento ABS"
- #define MSG_COOLDOWN " Rafredda"
- #define MSG_EXTRUDE " Estrudi"
- #define MSG_RETRACT " Ritrai"
- #define MSG_MOVE_AXIS " Muovi Asse \x7E"
- #define MSG_SPEED " Velcità:"
- #define MSG_NOZZLE " \002Ugello:"
- #define MSG_NOZZLE1 " \002Ugello2:"
- #define MSG_NOZZLE2 " \002Ugello3:"
- #define MSG_BED " \002Piatto:"
- #define MSG_FAN_SPEED " Velocità Ventola:"
- #define MSG_FLOW " Flusso:"
- #define MSG_CONTROL " Controllo \003"
+ #define MSG_MAIN "Menu principale"
+ #define MSG_AUTOSTART "Autostart"
+ #define MSG_DISABLE_STEPPERS "Disabilita Motori"
+ #define MSG_AUTO_HOME "Auto Home"
+ #define MSG_SET_ORIGIN "Imposta Origine"
+ #define MSG_PREHEAT_PLA "Preriscalda PLA"
+ #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
+ #define MSG_PREHEAT_ABS "Preriscalda ABS"
+ #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
+ #define MSG_COOLDOWN "Rafredda"
+ #define MSG_EXTRUDE "Estrudi"
+ #define MSG_RETRACT "Ritrai"
+ #define MSG_MOVE_AXIS "Muovi Asse"
+ #define MSG_SPEED "Velcità"
+ #define MSG_NOZZLE "Ugello"
+ #define MSG_NOZZLE1 "Ugello2"
+ #define MSG_NOZZLE2 "Ugello3"
+ #define MSG_BED "Piatto"
+ #define MSG_FAN_SPEED "Ventola"
+ #define MSG_FLOW "Flusso"
+ #define MSG_CONTROL "Controllo"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
+ #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-ritrai:"
- #define MSG_XSTEPS " Xpassi/mm:"
- #define MSG_YSTEPS " Ypassi/mm:"
- #define MSG_ZSTEPS " Zpassi/mm:"
- #define MSG_ESTEPS " Epassi/mm:"
- #define MSG_MAIN_WIDE " Menu Principale \003"
- #define MSG_RECTRACT_WIDE " Ritrai \x7E"
- #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
- #define MSG_TEMPERATURE_RTN " Temperatura \003"
- #define MSG_MOTION_WIDE " Movimento \x7E"
- #define MSG_STORE_EPROM " Salva in memoria"
- #define MSG_LOAD_EPROM " Carica dalla memoria"
- #define MSG_RESTORE_FAILSAFE " Configurazioni di default"
- #define MSG_REFRESH "\004Aggiorna"
- #define MSG_WATCH " Guarda \003"
- #define MSG_PREPARE " Prepara \x7E"
- #define MSG_PREPARE_ALT " Prepara \003"
- #define MSG_CONTROL_ARROW " Controllo \x7E"
- #define MSG_RETRACT_ARROW " Ritrai \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_PAUSE_PRINT " Metti in Pausa la Stampa \x7E"
- #define MSG_RESUME_PRINT " Riprendi Stampa \x7E"
- #define MSG_STOP_PRINT " Arresta Stampa \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_DWELL " Sospensione..."
- #define MSG_USERWAIT "Attendi utente..."
- #define MSG_RESUMING "Riprendi stampa"
- #define MSG_NO_MOVE "Nessun movimento."
- #define MSG_PART_RELEASE "Rilascio Parziale"
+ #define MSG_PID_P "PID-P"
+ #define MSG_PID_I "PID-I"
+ #define MSG_PID_D "PID-D"
+ #define MSG_PID_C "PID-C"
+ #define MSG_ACC "Accel"
+ #define MSG_VXY_JERK "Vxy-jerk"
+ #define MSG_VMAX "Vmax"
+ #define MSG_X "x"
+ #define MSG_Y "y"
+ #define MSG_Z "z"
+ #define MSG_E "e"
+ #define MSG_VMIN "Vmin"
+ #define MSG_VTRAV_MIN "VTrav min"
+ #define MSG_AMAX "Amax"
+ #define MSG_A_RETRACT "A-retract"
+ #define MSG_XSTEPS "Xpassi/mm"
+ #define MSG_YSTEPS "Ypassi/mm"
+ #define MSG_ZSTEPS "Zpassi/mm"
+ #define MSG_ESTEPS "Epassi/mm"
+ #define MSG_RECTRACT "Ritrai"
+ #define MSG_TEMPERATURE "Temperatura"
+ #define MSG_MOTION "Movimento"
+ #define MSG_STORE_EPROM "Salva in EEPROM"
+ #define MSG_LOAD_EPROM "Carica da EEPROM"
+ #define MSG_RESTORE_FAILSAFE "Impostaz. default"
+ #define MSG_REFRESH "Aggiorna"
+ #define MSG_WATCH "Guarda"
+ #define MSG_PREPARE "Prepara"
+ #define MSG_TUNE "Adatta"
+ #define MSG_PAUSE_PRINT "Pausa"
+ #define MSG_RESUME_PRINT "Riprendi Stampa"
+ #define MSG_STOP_PRINT "Arresta Stampa"
+ #define MSG_CARD_MENU "SD Card Menu"
+ #define MSG_NO_CARD "No SD Card"
+ #define MSG_DWELL "Sospensione..."
+ #define MSG_USERWAIT "Attendi Utente..."
+ #define MSG_RESUMING "Riprendi Stampa"
+ #define MSG_NO_MOVE "Nessun Movimento."
#define MSG_KILLED "UCCISO. "
#define MSG_STOPPED "ARRESTATO. "
- #define MSG_STEPPER_RELEASED "Rilasciato."
- #define MSG_CONTROL_RETRACT " Ritrai mm:"
- #define MSG_CONTROL_RETRACTF " Ritrai F:"
- #define MSG_CONTROL_RETRACT_ZLIFT " Salta mm:"
- #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
- #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
- #define MSG_AUTORETRACT " AutoRilascio.:"
+ #define MSG_CONTROL_RETRACT "Ritrai mm"
+ #define MSG_CONTROL_RETRACTF "Ritrai F"
+ #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
+ #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
+ #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
+ #define MSG_AUTORETRACT "AutoArretramento"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
- #define MSG_FILAMENTCHANGE "Change filament"
+ #define MSG_FILAMENTCHANGE "Cambia filamento"
+ #define MSG_INIT_SDCARD "Iniz. SD-Card"
+ #define MSG_CNG_SDCARD "Cambia SD-Card"
// Serial Console Messages
@@ -1083,10 +1081,10 @@
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "File Salvato."
- #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea:"
- #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea:"
- #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea:"
- #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea:"
+ #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
+ #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
#define MSG_FILE_PRINTED "File stampato"
#define MSG_BEGIN_FILE_LIST "Inizio Lista File"
#define MSG_END_FILE_LIST "Fine Lista File"
@@ -1096,15 +1094,15 @@
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
#define MSG_HEATING "Riscaldamento..."
- #define MSG_HEATING_COMPLETE "Riscaldamento concluso."
+ #define MSG_HEATING_COMPLETE "Stampante Calda."
#define MSG_BED_HEATING "Riscaldamento Piatto."
#define MSG_BED_DONE "Piatto Pronto."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
- #define MSG_COUNT_X " Calcola X:"
+ #define MSG_COUNT_X " Calcola X: "
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
#define MSG_RESEND "Reinviato:"
- #define MSG_UNKNOWN_COMMAND "Comando sconosciuto:\""
+ #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
#define MSG_INVALID_EXTRUDER "Estrusore non valido"
#define MSG_X_MIN "x_min: "
@@ -1125,16 +1123,16 @@
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
- #define MSG_SD_FILE_OPENED "File aperto:"
- #define MSG_SD_SIZE " Dimensione:"
+ #define MSG_SD_FILE_OPENED "File aperto: "
+ #define MSG_SD_SIZE " Dimensione: "
#define MSG_SD_FILE_SELECTED "File selezionato"
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
- #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella:"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
- #define MSG_STEPPER_TO_HIGH "Steprate troppo alto : "
+ #define MSG_STEPPER_TO_HIGH "Steprate troppo alto: "
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 6176136cd3c658c466155314812500566ac28e4d..31b570ca647521ae0ebafac4e5ddc0be16483561 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -199,9 +199,15 @@ static void lcd_main_menu()
MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop);
}else{
MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu);
+#if SDCARDDETECT < 1
+ MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user
+#endif
}
}else{
MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu);
+#if SDCARDDETECT < 1
+ MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
+#endif
}
#endif
END_MENU();
@@ -516,9 +522,9 @@ static void lcd_control_motion_menu()
MENU_ITEM_EDIT(float52, MSG_YSTEPS, &axis_steps_per_unit[Y_AXIS], 5, 9999);
MENU_ITEM_EDIT(float51, MSG_ZSTEPS, &axis_steps_per_unit[Z_AXIS], 5, 9999);
MENU_ITEM_EDIT(float51, MSG_ESTEPS, &axis_steps_per_unit[E_AXIS], 5, 9999);
-#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
- MENU_ITEM_EDIT(bool, "Endstop abort", &abort_on_endstop_hit);
-#endif
+#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+ MENU_ITEM_EDIT(bool, "Endstop abort", &abort_on_endstop_hit);
+#endif
END_MENU();
}
@@ -889,10 +895,10 @@ char *ftostr31(const float &x)
char *ftostr32(const float &x)
{
- long xx=x*100;
+ long xx=x*100;
if (xx >= 0)
- conv[0]=(xx/10000)%10+'0';
- else
+ conv[0]=(xx/10000)%10+'0';
+ else
conv[0]='-';
xx=abs(xx);
conv[1]=(xx/1000)%10+'0';
diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h
index 58d75bd3966a36d6f50ffece9fee1d612d5a5458..1d19b7718d917cc1418671325d2af578e281a081 100644
--- a/Marlin/ultralcd_implementation_hitachi_HD44780.h
+++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h
@@ -297,7 +297,12 @@ static void lcd_implementation_status_screen()
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
{
char c;
- uint8_t n = LCD_WIDTH - 1 - 2;
+ //Use all characters in narrow LCDs
+ #if LCD_WIDTH < 20
+ uint8_t n = LCD_WIDTH - 1 - 1;
+ #else
+ uint8_t n = LCD_WIDTH - 1 - 2;
+ #endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while((c = pgm_read_byte(pstr)) != '\0')
@@ -314,7 +319,12 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
{
char c;
- uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
+ //Use all characters in narrow LCDs
+ #if LCD_WIDTH < 20
+ uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
+ #else
+ uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
+ #endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while((c = pgm_read_byte(pstr)) != '\0')
@@ -331,7 +341,12 @@ static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
{
char c;
- uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
+ //Use all characters in narrow LCDs
+ #if LCD_WIDTH < 20
+ uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
+ #else
+ uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
+ #endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while((c = pgm_read_byte(pstr)) != '\0')
@@ -366,7 +381,11 @@ void lcd_implementation_drawedit(const char* pstr, char* value)
lcd.setCursor(1, 1);
lcd_printPGM(pstr);
lcd.print(':');
- lcd.setCursor(19 - strlen(value), 1);
+ #if LCD_WIDTH < 20
+ lcd.setCursor(LCD_WIDTH - strlen(value), 1);
+ #else
+ lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
+ #endif
lcd.print(value);
}
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)