diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index eff8d32923ac211881eef21ba0dc5134f8c70b81..34bd3836472a3469693231b985850f3331f42eb2 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -35,15 +35,20 @@ #define WELCOME_MSG MACHINE_NAME " prete." #define MSG_SD_INSERTED "Carte inseree" #define MSG_SD_REMOVED "Carte retiree" +#define MSG_LCD_ENDSTOPS "Butées" // Max length 8 characters #define MSG_MAIN "Menu principal" #define MSG_AUTOSTART "Demarrage auto" #define MSG_DISABLE_STEPPERS "Arreter moteurs" #define MSG_AUTO_HOME "Origine auto." +#define MSG_AUTO_HOME_X "Origine X Auto." +#define MSG_AUTO_HOME_Y "Origine Y Auto." +#define MSG_AUTO_HOME_Z "Origine Z Auto." #define MSG_LEVEL_BED_HOMING "Origine XYZ" -#define MSG_LEVEL_BED_WAITING "Cliquer pour commencer" +#define MSG_LEVEL_BED_WAITING "Clic pour commencer" +#define MSG_LEVEL_BED_NEXT_POINT "Point suivant" #define MSG_LEVEL_BED_DONE "Mise a niveau OK!" #define MSG_LEVEL_BED_CANCEL "Annuler" -#define MSG_SET_HOME_OFFSETS "Regler decal. origine" +#define MSG_SET_HOME_OFFSETS "Regl. decal. origine" #define MSG_HOME_OFFSETS_APPLIED "Decalages appliques" #define MSG_SET_ORIGIN "Regler origine" #define MSG_PREHEAT_1 "Prechauffage PLA" @@ -74,7 +79,7 @@ #define MSG_BED_Z "Plateau Z" #define MSG_NOZZLE "Buse" #define MSG_BED "Plateau" -#define MSG_FAN_SPEED "Vite. ventilateur" +#define MSG_FAN_SPEED "Vitesse ventil." #define MSG_FLOW "Flux" #define MSG_CONTROL "Controler" #define MSG_MIN LCD_STR_THERMOMETER " Min" @@ -87,7 +92,8 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" -#define MSG_ACC "Accel" +#define MSG_SELECT "Selectionner" +#define MSG_ACC "Acceleration" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" @@ -138,28 +144,96 @@ #define MSG_INIT_SDCARD "Init. la carte SD" #define MSG_CNG_SDCARD "Changer de carte" #define MSG_ZPROBE_OUT "Z sonde exte. lit" -#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST -#define MSG_FIRST "first" +#define MSG_HOME "Origine" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST +#define MSG_FIRST "Premier" #define MSG_ZPROBE_ZOFFSET "Decalage Z" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Babystep Z" #define MSG_ENDSTOP_ABORT "Butee abandon" #define MSG_HEATING_FAILED_LCD "Erreur de chauffe" -#define MSG_ERR_REDUNDANT_TEMP "Err: ERREUR TEMP. REDONDANTE" -#define MSG_THERMAL_RUNAWAY "EMBALLEMENT THERMIQUE" +#define MSG_ERR_REDUNDANT_TEMP "Err: TEMP. REDONDANT" +#define MSG_THERMAL_RUNAWAY "EMBALLEMENT THERM." #define MSG_ERR_MAXTEMP "Err: TEMP. MAX" #define MSG_ERR_MINTEMP "Err: TEMP. MIN" -#define MSG_ERR_MAXTEMP_BED "Err: TEMP. MAX PLATEAU" -#define MSG_ERR_MINTEMP_BED "Err: TEMP. MIN PLATEAU" +#define MSG_ERR_MAXTEMP_BED "Err: TEMP. MAX LIT" +#define MSG_ERR_MINTEMP_BED "Err: TEMP. MIN LIT" + +#define MSG_HALTED "IMPR. STOPPEE" +#define MSG_PLEASE_RESET "RaZ. SVP" +#define MSG_SHORT_DAY "j" // One character only +#define MSG_SHORT_HOUR "h" // One character only +#define MSG_SHORT_MINUTE "m" // One character only + #define MSG_HEATING "En chauffe..." #define MSG_HEATING_COMPLETE "Chauffe terminee" -#define MSG_BED_HEATING "Plateau en chauffe..." -#define MSG_BED_DONE "Chauffe plateau terminee" +#define MSG_BED_HEATING "Plateau en chauffe.." +#define MSG_BED_DONE "Chauffe lit terminee" #define MSG_DELTA_CALIBRATE "Calibration Delta" #define MSG_DELTA_CALIBRATE_X "Calibrer X" #define MSG_DELTA_CALIBRATE_Y "Calibrer Y" #define MSG_DELTA_CALIBRATE_Z "Calibrer Z" #define MSG_DELTA_CALIBRATE_CENTER "Calibrer centre" +#define MSG_INFO_MENU "Infos imprimante" +#define MSG_INFO_PRINTER_MENU "Infos imprimante" +#define MSG_INFO_STATS_MENU "Stats. imprimante" +#define MSG_INFO_BOARD_MENU "Infos carte" +#define MSG_INFO_THERMISTOR_MENU "Thermistors" +#define MSG_INFO_EXTRUDERS "Extruders" +#define MSG_INFO_BAUDRATE "Baud" +#define MSG_INFO_PROTOCOL "Protocole" + + +#if LCD_WIDTH > 19 + #define MSG_INFO_PRINT_COUNT "Nbre impressions" + #define MSG_INFO_COMPLETED_PRINTS "Terminees" + #define MSG_INFO_PRINT_TIME "Tps impr. total" + #define MSG_INFO_PRINT_LONGEST "Impr. la + longue" + #define MSG_INFO_PRINT_FILAMENT "Total filament" +#else + #define MSG_INFO_PRINT_COUNT "Impressions" + #define MSG_INFO_COMPLETED_PRINTS "Terminees" + #define MSG_INFO_PRINT_TIME "Total" + #define MSG_INFO_PRINT_LONGEST "+ long" + #define MSG_INFO_PRINT_FILAMENT "Filament" +#endif + +#define MSG_INFO_MIN_TEMP "Temp Min" +#define MSG_INFO_MAX_TEMP "Temp Max" +#define MSG_INFO_PSU "Alimentation" + +#define MSG_FILAMENT_CHANGE_HEADER "CHANGER FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGER OPTIONS:" +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "+ extrusion" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Reprendre impr." + +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 "Attente Demarrage" + #define MSG_FILAMENT_CHANGE_INIT_2 "du filament" + #define MSG_FILAMENT_CHANGE_INIT_3 "changer" + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "attente de" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "decharger filament" + #define MSG_FILAMENT_CHANGE_UNLOAD_3 "" + #define MSG_FILAMENT_CHANGE_INSERT_1 "inserer filament" + #define MSG_FILAMENT_CHANGE_INSERT_2 "et app. bouton" + #define MSG_FILAMENT_CHANGE_INSERT_3 "pour continuer..." + #define MSG_FILAMENT_CHANGE_LOAD_1 "attente de" + #define MSG_FILAMENT_CHANGE_LOAD_2 "charger filament" + #define MSG_FILAMENT_CHANGE_LOAD_3 "" + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "attente de" + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrusion fil." + #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" + #define MSG_FILAMENT_CHANGE_RESUME_1 "attente impression" + #define MSG_FILAMENT_CHANGE_RESUME_2 "pour reprendre" + #define MSG_FILAMENT_CHANGE_RESUME_3 "" +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 "Patientez..." + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejection..." + #define MSG_FILAMENT_CHANGE_INSERT_1 "Inserer et click" + #define MSG_FILAMENT_CHANGE_LOAD_1 "Chargement..." + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrusion..." + #define MSG_FILAMENT_CHANGE_RESUME_1 "Reprise..." +#endif // LCD_HEIGHT < 4 + #endif // LANGUAGE_FR_H