diff --git a/Marlin/language.h b/Marlin/language.h index 99c6751451e6bd9829ca9cb222fcc40e0699bdfa..8ace273ec42f01c4ae63d890e53301be339e0563 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,11 +1,16 @@ #ifndef LANGUAGE_H #define LANGUAGE_H +// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES +// +// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" +// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS + // Languages -// 1 Custom (For you to add your own messages) -// 2 English +// 1 English +// 2 - // 3 French (Waiting translation) -// 4 German (Waiting translation) +// 4 German // 5 Spanish // 6 Etc @@ -37,7 +42,7 @@ #define MSG_SET_ORIGIN " Set Origin" #define MSG_COOLDOWN " Cooldown" #define MSG_EXTRUDE " Extrude" - #define MSG_RETRACT " Extract" + #define MSG_RETRACT " Retract" #define MSG_PREHEAT_PLA " Preheat PLA" #define MSG_PREHEAT_ABS " Preheat ABS" #define MSG_MOVE_AXIS " Move Axis \x7E" @@ -86,29 +91,27 @@ #define MSG_PREPARE " Prepare \x7E" #define MSG_PREPARE_ALT " Prepare \003" #define MSG_CONTROL_ARROW " Control \x7E" - #define MSG_RETRACT_ARROW " Control \x7E" + #define MSG_RETRACT_ARROW " Retract \x7E" #define MSG_TUNE " Tune \x7E" #define MSG_PAUSE_PRINT " Pause Print \x7E" #define MSG_RESUME_PRINT " Resume Print \x7E" #define MSG_STOP_PRINT " Stop Print \x7E" #define MSG_CARD_MENU " Card Menu \x7E" #define MSG_NO_CARD " No Card" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." #define MSG_DWELL "Sleep..." #define MSG_USERWAIT "Wait for user..." #define MSG_NO_MOVE "No move." #define MSG_PART_RELEASE "Partial Release" #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " - #define MSG_PREHEAT_PLA " Preheat PLA" - #define MSG_PREHEAT_ABS " Preheat ABS" #define MSG_STEPPER_RELEASED "Released." - #define MSG_CONTROL_RETRACT " Retract mm:" - #define MSG_CONTROL_RETRACTF " Retract F:" - #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" - #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" - #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" - #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_CONTROL_RETRACT " Retract mm:" + #define MSG_CONTROL_RETRACTF " Retract F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure." // Serial Console Messages @@ -181,84 +184,87 @@ // LCD Menu Messages - #define WELCOME_MSG MACHINE_NAME " Ready." + #define WELCOME_MSG MACHINE_NAME " Bereit." - #define MSG_SD_INSERTED "Card inserted" - #define MSG_SD_REMOVED "Card removed" - #define MSG_MAIN " Main \003" - #define MSG_AUTOSTART " Autostart" + #define MSG_SD_INSERTED "SDKarte erkannt" + #define MSG_SD_REMOVED "SDKarte entfernt" + #define MSG_MAIN " Hauptmneü \003" + #define MSG_AUTOSTART " Autostart" #define MSG_DISABLE_STEPPERS " Stepper abschalten" - #define MSG_AUTO_HOME " Auto Heim" - #define MSG_SET_ORIGIN " Position setzen" - #define MSG_PREHEAT_PLA " Aufheizen PLA" - #define MSG_PREHEAT_ABS " Aufheizen ABS" - #define MSG_COOLDOWN " Abkuehlen" - #define MSG_EXTRUDE " Extrude" - #define MSG_PREHEAT_PLA " Preheat PLA" - #define MSG_PREHEAT_ABS " Preheat ABS" - #define MSG_MOVE_AXIS " Move Axis \x7E" - #define MSG_MOVE_AXIS " Achsen verfahren \x7E" - #define MSG_SPEED " Geschw:" - #define MSG_NOZZLE " \002Duese:" - #define MSG_NOZZLE1 " \002Duese2:" - #define MSG_NOZZLE2 " \002Duese3:" - #define MSG_BED " \002Bett:" - #define MSG_FAN_SPEED " Luefter geschw.:" - #define MSG_FLOW " Fluss:" - #define MSG_CONTROL " Kontrolle \003" - #define MSG_MIN " \002 Min:" - #define MSG_MAX " \002 Max:" - #define MSG_FACTOR " \002 Faktor:" - #define MSG_AUTOTEMP " AutoTemp:" - #define MSG_ON "Ein " - #define MSG_OFF "Aus " - #define MSG_PID_P " PID-P: " - #define MSG_PID_I " PID-I: " - #define MSG_PID_D " PID-D: " - #define MSG_PID_C " PID-C: " - #define MSG_ACC " Acc:" - #define MSG_VXY_JERK " Vxy-jerk: " - #define MSG_VMAX " Vmax " - #define MSG_X "x:" - #define MSG_Y "y:" - #define MSG_Z "z:" - #define MSG_E "e:" - #define MSG_VMIN " Vmin:" - #define MSG_VTRAV_MIN " VTrav min:" - #define MSG_AMAX " Amax " - #define MSG_A_RETRACT " A-retract:" - #define MSG_XSTEPS " Xsteps/mm:" - #define MSG_YSTEPS " Ysteps/mm:" - #define MSG_ZSTEPS " Zsteps/mm:" - #define MSG_ESTEPS " Esteps/mm:" - #define MSG_MAIN_WIDE " Main \003" - #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" - #define MSG_MOTION_WIDE " Motion \x7E" - #define MSG_STORE_EPROM " EPROM speichern" - #define MSG_LOAD_EPROM " EPROM laden" - #define MSG_RESTORE_FAILSAFE " Standard Konfig." - #define MSG_REFRESH "\004Refresh" - #define MSG_WATCH " Beobachten \003" - #define MSG_PREPARE " Prepare \x7E" - #define MSG_PREPARE_ALT " Prepare \003" - #define MSG_CONTROL_ARROW " Control \x7E" + #define MSG_AUTO_HOME " Auto Nullpunkt" + #define MSG_SET_ORIGIN " Setze Nullpunkt" + #define MSG_PREHEAT_PLA " Vorwärmen PLA" + #define MSG_PREHEAT_ABS " Vorwärmen ABS" + #define MSG_COOLDOWN " Abkühlen" + #define MSG_EXTRUDE " Extrude" + #define MSG_RETRACT " Retract" + #define MSG_MOVE_AXIS " Achsen bewegen\x7E" + #define MSG_SPEED " Geschw:" + #define MSG_NOZZLE " \002Düse:" + #define MSG_NOZZLE1 " \002Düse2:" + #define MSG_NOZZLE2 " \002Düse3:" + #define MSG_BED " \002Bett:" + #define MSG_FAN_SPEED " Lüftergeschw.:" + #define MSG_FLOW " Fluß:" + #define MSG_CONTROL " Einstellungen \003" + #define MSG_MIN " \002 Min:" + #define MSG_MAX " \002 Max:" + #define MSG_FACTOR " \002 Faktor:" + #define MSG_AUTOTEMP " AutoTemp:" + #define MSG_ON "Ein " + #define MSG_OFF "Aus " + #define MSG_PID_P " PID-P: " + #define MSG_PID_I " PID-I: " + #define MSG_PID_D " PID-D: " + #define MSG_PID_C " PID-C: " + #define MSG_ACC " Acc:" + #define MSG_VXY_JERK " Vxy-jerk: " + #define MSG_VMAX " Vmax " + #define MSG_X "x:" + #define MSG_Y "y:" + #define MSG_Z "z:" + #define MSG_E "e:" + #define MSG_VMIN " Vmin:" + #define MSG_VTRAV_MIN " VTrav min:" + #define MSG_AMAX " Amax " + #define MSG_A_RETRACT " A-Retract:" + #define MSG_XSTEPS " Xsteps/mm:" + #define MSG_YSTEPS " Ysteps/mm:" + #define MSG_ZSTEPS " Zsteps/mm:" + #define MSG_ESTEPS " Esteps/mm:" + #define MSG_MAIN_WIDE " Hauptmenü \003" + #define MSG_RECTRACT_WIDE " Rectract \x7E" + #define MSG_WATCH " Beobachten \003" + #define MSG_TEMPERATURE_WIDE " Temperatur \x7E" + #define MSG_MOTION_WIDE " Bewegung \x7E" + #define MSG_STORE_EPROM " EPROM speichern" + #define MSG_LOAD_EPROM " EPROM laden" + #define MSG_RESTORE_FAILSAFE " Standardkonfig." + #define MSG_REFRESH "\004Aktualisieren" + #define MSG_PREPARE " Vorbereitung \x7E" + #define MSG_PREPARE_ALT " Vorbereitung \003" + #define MSG_CONTROL_ARROW " Einstellungen \x7E" + #define MSG_TUNE " Justierung \x7E" + #define MSG_PAUSE_PRINT " Druck anhalten\x7E" + #define MSG_RESUME_PRINT " Druck fortsetz\x7E" + #define MSG_STOP_PRINT " Druck stoppen \x7E" + #define MSG_CARD_MENU " SDKarten Menü \x7E" + #define MSG_NO_CARD " Keine SDKarte" + #define MSG_DWELL "Warten..." + #define MSG_USERWAIT "Warte auf Nutzer..." + #define MSG_NO_MOVE "Kein Zug." + #define MSG_PART_RELEASE "Stepper tlw frei" + #define MSG_KILLED "KILLED" + #define MSG_STOPPED "GESTOPPT" + #define MSG_STEPPER_RELEASED "Stepper frei" + #define MSG_CONTROL_RETRACT " Retract mm:" + #define MSG_CONTROL_RETRACTF " Retract F:" + #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" + #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" + #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" + #define MSG_AUTORETRACT " AutoRetr.:" + #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur." - #define MSG_TUNE " Tune \x7E" - #define MSG_STOP_PRINT " Druck stoppen \x7E" - #define MSG_CARD_MENU " SDKarten Menue \x7E" - #define MSG_NO_CARD " Keine SDKarte" - #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der Menuestruktur." - #define MSG_DWELL "DWELL..." - #define MSG_NO_MOVE "No move." - #define MSG_PART_RELEASE "Partial Release" - #define MSG_KILLED "KILLED. " - #define MSG_STOPPED "STOPPED. " - #define MSG_PREHEAT_PLA " Preheat PLA" - #define MSG_PREHEAT_ABS " Preheat ABS" - #define MSG_STEPPER_RELEASED "Released." - - - // Serial Console Messages #define MSG_Enqueing "enqueing \"" @@ -340,6 +346,7 @@ #define MSG_SET_ORIGIN " Establecer Cero" #define MSG_COOLDOWN " Enfriar" #define MSG_EXTRUDE " Extruir" +#define MSG_RETRACT " Retract" #define MSG_PREHEAT_PLA " Precalentar PLA" #define MSG_PREHEAT_ABS " Precalentar ABS" #define MSG_MOVE_AXIS " Mover Ejes \x7E" @@ -390,6 +397,8 @@ #define MSG_CONTROL_ARROW " Control \x7E" #define MSG_RETRACT_ARROW " Control \x7E" #define MSG_TUNE " Ajustar \x7E" +#define MSG_PAUSE_PRINT " Pause Print \x7E" +#define MSG_RESUME_PRINT " Resume Print \x7E" #define MSG_STOP_PRINT " Detener Impresion \x7E" #define MSG_CARD_MENU " Menu de SD \x7E" #define MSG_NO_CARD " No hay Tarjeta SD"