From 694d2ebec0ced38a0b8771cd5bb69d0139ab48ad Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Thu, 8 Feb 2018 18:49:05 -0600
Subject: [PATCH] TMC SW SPI pins in Configuration_adv.h
Counterpart to #9632
---
Marlin/Configuration_adv.h | 9 +++++++--
Marlin/src/config/default/Configuration_adv.h | 9 +++++++--
.../examples/AlephObjects/TAZ4/Configuration_adv.h | 9 +++++++--
.../src/config/examples/Anet/A6/Configuration_adv.h | 9 +++++++--
.../src/config/examples/Anet/A8/Configuration_adv.h | 9 +++++++--
.../config/examples/Azteeg/X5GT/Configuration_adv.h | 9 +++++++--
.../examples/BQ/Hephestos/Configuration_adv.h | 9 +++++++--
.../examples/BQ/Hephestos_2/Configuration_adv.h | 9 +++++++--
.../config/examples/BQ/WITBOX/Configuration_adv.h | 9 +++++++--
.../config/examples/Cartesio/Configuration_adv.h | 9 +++++++--
.../examples/Creality/CR-10/Configuration_adv.h | 9 +++++++--
.../examples/Creality/CR-10S/Configuration_adv.h | 13 ++++++++++++-
.../examples/Creality/Ender/Configuration_adv.h | 13 ++++++++++++-
.../src/config/examples/Felix/Configuration_adv.h | 9 +++++++--
.../examples/FolgerTech/i3-2020/Configuration_adv.h | 9 +++++++--
.../examples/Infitary/i3-M508/Configuration_adv.h | 9 +++++++--
.../config/examples/JGAurora/A5/Configuration_adv.h | 13 ++++++++++++-
.../config/examples/MakerParts/Configuration_adv.h | 9 +++++++--
.../config/examples/Malyan/M150/Configuration_adv.h | 9 +++++++--
.../config/examples/Malyan/M200/Configuration_adv.h | 9 +++++++--
.../Micromake/C1/enhanced/Configuration_adv.h | 9 +++++++--
.../config/examples/Mks/Sbase/Configuration_adv.h | 9 +++++++--
.../config/examples/RigidBot/Configuration_adv.h | 9 +++++++--
.../src/config/examples/SCARA/Configuration_adv.h | 9 +++++++--
.../examples/Sanguinololu/Configuration_adv.h | 9 +++++++--
.../src/config/examples/TheBorg/Configuration_adv.h | 13 ++++++++++++-
.../config/examples/TinyBoy2/Configuration_adv.h | 9 +++++++--
.../UltiMachine/Archim2/Configuration_adv.h | 9 +++++++--
.../examples/Velleman/K8200/Configuration_adv.h | 9 +++++++--
.../examples/Velleman/K8400/Configuration_adv.h | 9 +++++++--
.../Wanhao/Duplicator 6/Configuration_adv.h | 9 +++++++--
.../delta/FLSUN/auto_calibrate/Configuration_adv.h | 9 +++++++--
.../examples/delta/FLSUN/kossel/Configuration_adv.h | 13 ++++++++++++-
.../delta/FLSUN/kossel_mini/Configuration_adv.h | 9 +++++++--
.../examples/delta/generic/Configuration_adv.h | 9 +++++++--
.../examples/delta/kossel_mini/Configuration_adv.h | 9 +++++++--
.../examples/delta/kossel_pro/Configuration_adv.h | 9 +++++++--
.../examples/delta/kossel_xl/Configuration_adv.h | 9 +++++++--
.../examples/gCreate/gMax1.5+/Configuration_adv.h | 9 +++++++--
.../src/config/examples/makibox/Configuration_adv.h | 9 +++++++--
.../examples/tvrrug/Round2/Configuration_adv.h | 9 +++++++--
.../src/config/examples/wt150/Configuration_adv.h | 9 +++++++--
42 files changed, 319 insertions(+), 79 deletions(-)
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index fab4236ba6..03690b51b5 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index fab4236ba6..03690b51b5 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index cdd488d801..c68f25311f 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index e6af12e38d..7d77a5109c 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 6aed5686dc..fe3111f1f6 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index 0ff3026413..f79a4246c2 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -1000,9 +1000,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1088,9 +1089,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 2fabd2df7a..043ac8bd31 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index d4ff484ab9..4d9c7f702c 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 2fabd2df7a..043ac8bd31 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 1cf9bb4a86..4e82c79936 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 7ae777b3a6..7048b4a3e0 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index 6a6ed75b94..dd3e4afd49 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1085,6 +1086,16 @@
#define E4_CURRENT 800
#define E4_MICROSTEPS 16
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
/**
* Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode.
diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
index 8672c4aa7d..d8b6f231ab 100644
--- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1085,6 +1086,16 @@
#define E4_CURRENT 800
#define E4_MICROSTEPS 16
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
/**
* Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode.
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 19b1a2249c..d71a9f77f6 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 43bcd5f32b..9bd3dae95f 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 055b2516ce..f3592dc740 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 0a15d7af52..ad0ede72fa 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1085,6 +1086,16 @@
#define E4_CURRENT 800
#define E4_MICROSTEPS 16
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
/**
* Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode.
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 725b5bfc70..96d1cee990 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -1000,9 +1000,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1088,9 +1089,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 1e81d6fbb5..ea8603520e 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index cf040f5a48..96124faacb 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 92139143cf..0535470c92 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index ff9ce83ad6..5083e8b811 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1007,9 +1007,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1095,9 +1096,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index cc692d35f4..24855847d9 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 49f2d1ee68..39b1dda88f 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index c4246e8c79..64cde0b4bd 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 0777756e09..7b195b47a6 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -996,9 +996,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1082,6 +1083,16 @@
#define E4_CURRENT 800
#define E4_MICROSTEPS 16
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
/**
* Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode.
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 39c18e22a6..f96f1d9bc2 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 6b7efc454c..879ab4a326 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index 19fcde8dad..5a9de6070b 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1012,9 +1012,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1100,9 +1101,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index 53c72e4849..ac79e75a12 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index ffc2a6ef80..e2991376c2 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1089,9 +1090,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 59e62b6d1d..f1d7062448 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1089,9 +1090,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 03fd747437..8f111531b5 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,6 +1088,16 @@
#define E4_CURRENT 800
#define E4_MICROSTEPS 16
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
/**
* Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode.
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 8b632a9882..941036748b 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1089,9 +1090,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 8b632a9882..941036748b 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1089,9 +1090,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 8b632a9882..941036748b 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1089,9 +1090,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index ed8af1ea49..f7b4e535d0 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -1006,9 +1006,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1094,9 +1095,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index 35f6a5fb24..bff637b55b 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1089,9 +1090,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index ae221c3d1e..f5de9dca16 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 814112cf96..345b812324 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 0f1e7f7484..37144c3343 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1087,9 +1088,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index c4d0f7ec64..5471455498 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -1000,9 +1000,10 @@
* You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper).
*
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
@@ -1088,9 +1089,13 @@
/**
* Use software SPI for TMC2130.
- * SW SPI pins are defined the respective pins files.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
/**
* Use Trinamic's ultra quiet stepping mode.
--
GitLab