From 675be8db7cfe07665f350bb19bf8c5c0af6fa7b3 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sun, 6 May 2018 02:56:40 -0500
Subject: [PATCH] Bring some example configs up to date
---
Marlin/Configuration_adv.h | 2 +-
.../AlephObjects/TAZ4/Configuration_adv.h | 2 +-
.../Anet/A6/Configuration_adv.h | 2 +-
.../Anet/A8/Configuration.h | 23 +++++--------------
.../Anet/A8/Configuration_adv.h | 2 +-
.../BIBO/TouchX/Cyclops/Configuration_adv.h | 2 +-
.../BIBO/TouchX/default/Configuration_adv.h | 2 +-
.../BQ/Hephestos/Configuration_adv.h | 2 +-
.../BQ/Hephestos_2/Configuration_adv.h | 2 +-
.../BQ/WITBOX/Configuration_adv.h | 2 +-
.../Cartesio/Configuration_adv.h | 8 ++++---
.../Creality/CR-10/Configuration_adv.h | 2 +-
.../Creality/CR-10/_Bootscreen.h | 0
.../Creality/CR-10/_Statusscreen.h | 0
.../Creality/CR-10S/Configuration_adv.h | 3 ++-
.../Creality/CR-10mini/Configuration_adv.h | 2 +-
.../Creality/CR-8/Configuration_adv.h | 3 ++-
.../Creality/Ender-2/Configuration_adv.h | 2 +-
.../Creality/Ender-3/Configuration.h | 4 ++--
.../Creality/Ender-3/Configuration_adv.h | 2 +-
.../Creality/Ender-4/Configuration_adv.h | 2 +-
.../Felix/Configuration_adv.h | 2 +-
.../FolgerTech/i3-2020/Configuration.h | 21 ++++++-----------
.../FolgerTech/i3-2020/Configuration_adv.h | 2 +-
.../Prusa i3 Pro C/Configuration_adv.h | 2 +-
.../Prusa i3 Pro W/Configuration_adv.h | 2 +-
.../Infitary/i3-M508/Configuration_adv.h | 2 +-
.../JGAurora/A5/Configuration_adv.h | 2 +-
.../Malyan/M150/Configuration.h | 23 +++++--------------
.../Malyan/M150/Configuration_adv.h | 2 +-
.../Micromake/C1/enhanced/Configuration_adv.h | 2 +-
.../RepRapPro/Huxley/Configuration.h | 3 +++
.../RigidBot/Configuration_adv.h | 2 +-
.../SCARA/Configuration_adv.h | 2 +-
.../Sanguinololu/Configuration_adv.h | 2 +-
.../TinyBoy2/Configuration_adv.h | 2 +-
.../Tronxy/X1/Configuration.h | 4 ++--
.../Tronxy/X5S/Configuration.h | 4 ++--
.../Velleman/K8200/Configuration_adv.h | 2 +-
.../Velleman/K8400/Configuration_adv.h | 2 +-
.../Wanhao/Duplicator 6/Configuration.h | 5 +++-
.../Wanhao/Duplicator 6/Configuration_adv.h | 2 +-
.../FLSUN/auto_calibrate/Configuration_adv.h | 2 +-
.../delta/FLSUN/kossel/Configuration.h | 3 +--
.../delta/FLSUN/kossel/Configuration_adv.h | 2 +-
.../delta/FLSUN/kossel_mini/Configuration.h | 1 +
.../FLSUN/kossel_mini/Configuration_adv.h | 2 +-
.../delta/Hatchbox_Alpha/Configuration.h | 23 +++++--------------
.../delta/generic/Configuration_adv.h | 2 +-
.../delta/kossel_mini/Configuration.h | 3 +--
.../delta/kossel_mini/Configuration_adv.h | 2 +-
.../delta/kossel_pro/Configuration.h | 1 +
.../delta/kossel_pro/Configuration_adv.h | 2 +-
.../delta/kossel_xl/Configuration_adv.h | 2 +-
.../gCreate/gMax1.5+/Configuration.h | 19 +++++----------
.../gCreate/gMax1.5+/Configuration_adv.h | 2 +-
.../makibox/Configuration_adv.h | 2 +-
.../tvrrug/Round2/Configuration_adv.h | 2 +-
.../wt150/Configuration_adv.h | 5 ++--
59 files changed, 98 insertions(+), 136 deletions(-)
mode change 100755 => 100644 Marlin/example_configurations/Creality/CR-10/_Bootscreen.h
mode change 100755 => 100644 Marlin/example_configurations/Creality/CR-10/_Statusscreen.h
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 3689c245a9..ec7fe10e45 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index 8498d98f75..8fe965b619 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 621e2e6142..a1369a9873 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h
index 930db3c00e..91fa71938f 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration.h
@@ -992,17 +992,6 @@
#endif
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
- // 3 arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define PROBE_PT_1_X 20
- #define PROBE_PT_1_Y 160
- #define PROBE_PT_2_X 20
- #define PROBE_PT_2_Y 10
- #define PROBE_PT_3_X 180
- #define PROBE_PT_3_Y 10
-
#elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
@@ -1040,12 +1029,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 20
+ #define PROBE_PT_1_Y 160
+ #define PROBE_PT_2_X 20
+ #define PROBE_PT_2_Y 10
+ #define PROBE_PT_3_X 180
+ #define PROBE_PT_3_Y 10
#endif
/**
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 6db3bdb9cc..883a9d95c9 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
index 52e43f4cc5..88265063cb 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
index 3689c245a9..ec7fe10e45 100644
--- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 2019bd8172..275f678776 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index e1f8667cf9..d314ae1a43 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 2019bd8172..275f678776 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 08e43ae57a..65c13b232b 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -182,10 +182,12 @@
// @section temperature
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
#define TEMP_SENSOR_AD595_OFFSET 3.0
#define TEMP_SENSOR_AD595_GAIN 2.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN 1.0
/**
* Controller Fan
@@ -1215,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index bbbdfc15d8..50feb6970f 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h b/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h
old mode 100755
new mode 100644
diff --git a/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h
old mode 100755
new mode 100644
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index 456e48132e..5600f6db0a 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -937,6 +937,7 @@
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
+
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
@@ -1216,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
index 10989807a1..4061bacf82 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
index 054909fe5b..7cbf04f3d5 100644
--- a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
@@ -232,6 +232,7 @@
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@@ -1216,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
index 5691cb1746..5909e8709d 100644
--- a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration.h b/Marlin/example_configurations/Creality/Ender-3/Configuration.h
index 34851f228b..f67ecd3de0 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration.h
@@ -1035,8 +1035,8 @@
#endif
/**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
*/
//#define LCD_BED_LEVELING
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
index c0a85b0267..4986f71091 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
index 9b0d46e240..7cbf04f3d5 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 693f8ae14b..38e52c95ba 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
index 070d2cb82b..c65a05375f 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
@@ -1012,14 +1012,7 @@
#define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
- #define GRID_MAX_POINTS_Y 10
-
- #define PROBE_PT_1_X 45 // Probing points for 3-Point leveling of the mesh
- #define PROBE_PT_1_Y 170
- #define PROBE_PT_2_X 45
- #define PROBE_PT_2_Y 25
- #define PROBE_PT_3_X 180
- #define PROBE_PT_3_Y 25
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@@ -1046,12 +1039,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 45
+ #define PROBE_PT_1_Y 170
+ #define PROBE_PT_2_X 45
+ #define PROBE_PT_2_Y 25
+ #define PROBE_PT_3_X 180
+ #define PROBE_PT_3_Y 25
#endif
/**
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 1b0d615794..1f6fdbe0f3 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 87fc8fd0f5..5276e91051 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 87fc8fd0f5..5276e91051 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 5e01f74ec0..ddedf84743 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
index 916133435a..822a6b31a2 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h
index 1fadd066e7..72746b559f 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration.h
@@ -1013,17 +1013,6 @@
#endif
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
- // 3 arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define PROBE_PT_1_X 50
- #define PROBE_PT_1_Y 150
- #define PROBE_PT_2_X 50
- #define PROBE_PT_2_Y 50
- #define PROBE_PT_3_X 150
- #define PROBE_PT_3_Y 50
-
#elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
@@ -1061,12 +1050,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 50
+ #define PROBE_PT_1_Y 150
+ #define PROBE_PT_2_X 50
+ #define PROBE_PT_2_Y 50
+ #define PROBE_PT_3_X 150
+ #define PROBE_PT_3_Y 50
#endif
/**
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index a9865bfb71..b3e2617e75 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index aff032c0fb..ae415d8d03 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
index 62f58dd235..4c515bbe91 100644
--- a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
@@ -713,6 +713,9 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
* readings with inductive probes and piezo sensors.
*/
//#define PROBING_HEATERS_OFF // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+ //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
//#define PROBING_FANS_OFF // Turn fans off when probing
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 1898461a7a..cdb7a53019 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 9b9d92df71..1a42b7c8a7 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index f72a698cb7..153efcce7e 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index df232ab6ab..8ecf0bf6cb 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h
index 9e478b4542..c13b25847b 100644
--- a/Marlin/example_configurations/Tronxy/X1/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h
@@ -358,7 +358,7 @@
#define PIDTEMP
#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95 // Smoothing factor within the PID
+#define PID_K1 0.95 // Smoothing factor within any PID loop
#if ENABLED(PIDTEMP)
//#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
//#define PID_DEBUG // Sends debug data to the serial port.
@@ -942,7 +942,7 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
- #define G26_MESH_VALIDATION // Enable G26 mesh validation
+ #define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
index cc9c6176f8..29fd2a20b2 100644
--- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
@@ -1079,8 +1079,8 @@
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
- #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28).
- #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28).
+ #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
+ #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#endif
// Homing speeds (mm/m)
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index 7f8d70db29..087d3ad697 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -1230,7 +1230,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index 03ffaef438..65484ec92e 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
index da211eb803..7e3cfb9696 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
@@ -883,7 +883,7 @@
//===========================================================================
//=============================== Bed Leveling ==============================
//===========================================================================
-// @section bedlevel
+// @section calibrate
/**
* Choose one of the options below to enable G29 Bed Leveling. The parameters
@@ -1010,6 +1010,9 @@
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
+ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+ // as the Z-Height correction value.
+
#elif ENABLED(MESH_BED_LEVELING)
//===========================================================================
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index 6a2f02a488..3df0bcfc30 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index bef8b7dbc6..23242fc820 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
index 9ad462fc1d..7a1528a01c 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
@@ -839,8 +839,7 @@
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
- // Move the probe into position
- #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0
+ #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index 48552de0dc..cca003a52b 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 7d20849c46..c000a87e6d 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -1087,6 +1087,7 @@
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension.
+ // Works best with 5 or more points in each dimension.
#define GRID_MAX_POINTS_X 9
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index c1eba14508..ae0063674b 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
index dd25eb4e6c..2b76a83b60 100644
--- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
@@ -1120,17 +1120,6 @@
#endif
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
- // 3 arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define PROBE_PT_1_X -116
- #define PROBE_PT_1_Y -67.5
- #define PROBE_PT_2_X 116
- #define PROBE_PT_2_Y -67.5
- #define PROBE_PT_3_X 0
- #define PROBE_PT_3_Y 135
-
#elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
@@ -1168,12 +1157,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X -116
+ #define PROBE_PT_1_Y -67.5
+ #define PROBE_PT_2_X 116
+ #define PROBE_PT_2_Y -67.5
+ #define PROBE_PT_3_X 0
+ #define PROBE_PT_3_Y 135
#endif
/**
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index c1eba14508..ae0063674b 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 769fa4b12d..c1ff2f6f8b 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -829,8 +829,7 @@
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
- // Move the probe into position
- #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0
+ #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index c1eba14508..ae0063674b 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 8da18ad025..af6a2c2214 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -864,6 +864,7 @@
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset
+
#define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX 5
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 5865ac8116..7782f3590d 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -1224,7 +1224,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index ed76c264b5..cea7de48fd 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
index 0b5f8aed5a..85253036a0 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
@@ -1011,13 +1011,6 @@
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
- #define PROBE_PT_1_X 53 // Probing points for 3-Point leveling of the mesh
- #define PROBE_PT_1_Y 323
- #define PROBE_PT_2_X 53
- #define PROBE_PT_2_Y 63
- #define PROBE_PT_3_X 348
- #define PROBE_PT_3_Y 211
-
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@@ -1043,12 +1036,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 53
+ #define PROBE_PT_1_Y 323
+ #define PROBE_PT_2_X 53
+ #define PROBE_PT_2_Y 63
+ #define PROBE_PT_3_X 348
+ #define PROBE_PT_3_Y 211
#endif
/**
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 7300db029c..85efd11008 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index fab073cde8..7ef8f77080 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index e06afee8af..5f9f3ea5a7 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index a62047ccf7..52c25217cc 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -1031,8 +1031,7 @@
* You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)
- // Choose your axes here. This is mandatory!
+#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory!
//#define X_IS_TMC2130
//#define X2_IS_TMC2130
//#define Y_IS_TMC2130
@@ -1219,7 +1218,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
--
GitLab