diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 3689c245a9f0c38f45e2630147ca2208cc781400..ec7fe10e451b3fcd879a1111805d510a6fa2b9ef 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index 8498d98f7538cab8d9944b4ad9cf74bb70bc4e6a..8fe965b6192eec6cb48fe7ca96b8bfffd523947e 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 621e2e6142833a43de83eaa6eb5fc9180ec02c30..a1369a9873d212e0aebdaf17d6cbf5f05c07fae9 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h
index 930db3c00e75b073decdaf8afa577814ffdf464d..91fa71938fd924a0682d0b8a90cc7cb99f99681f 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration.h
@@ -992,17 +992,6 @@
#endif
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
- // 3 arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define PROBE_PT_1_X 20
- #define PROBE_PT_1_Y 160
- #define PROBE_PT_2_X 20
- #define PROBE_PT_2_Y 10
- #define PROBE_PT_3_X 180
- #define PROBE_PT_3_Y 10
-
#elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
@@ -1040,12 +1029,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 20
+ #define PROBE_PT_1_Y 160
+ #define PROBE_PT_2_X 20
+ #define PROBE_PT_2_Y 10
+ #define PROBE_PT_3_X 180
+ #define PROBE_PT_3_Y 10
#endif
/**
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 6db3bdb9cc89aedfcf03e942ade86aa2ee71e5d4..883a9d95c9cd8913823385f78d0f1f370476114e 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
index 52e43f4cc5879193f36d282d91439df4e8cf0f4e..88265063cbdc478de44f5365eb50b1912d38ed27 100644
--- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
index 3689c245a9f0c38f45e2630147ca2208cc781400..ec7fe10e451b3fcd879a1111805d510a6fa2b9ef 100644
--- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 2019bd817265fa3a43dedd55d0c5e7a41b8c58a5..275f678776b72278df09a5b36daefe635f1466c4 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index e1f8667cf90b5fede6d1dc6b790eb5193a0c5795..d314ae1a43b967524bf51fc0f1c14fb02ed43d88 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 2019bd817265fa3a43dedd55d0c5e7a41b8c58a5..275f678776b72278df09a5b36daefe635f1466c4 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 08e43ae57acd5ca7472b76afad1d25817e0f9eb4..65c13b232b6d6ae47e2ababc1ff7fb22ab7d5841 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -182,10 +182,12 @@
// @section temperature
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
#define TEMP_SENSOR_AD595_OFFSET 3.0
#define TEMP_SENSOR_AD595_GAIN 2.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN 1.0
/**
* Controller Fan
@@ -1215,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index bbbdfc15d829dae00e85abf6ca7903896b52ba15..50feb6970fe8bb761aba037a2e2f41573a47f474 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h b/Marlin/example_configurations/Creality/CR-10/_Bootscreen.h
old mode 100755
new mode 100644
diff --git a/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10/_Statusscreen.h
old mode 100755
new mode 100644
diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
index 456e48132ec74e5d5db934f250cacc813f34a08b..5600f6db0a254917ceef7679052a686d7615619c 100644
--- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h
@@ -937,6 +937,7 @@
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
+
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
@@ -1216,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
index 10989807a11306bfa2cf62cd60de4333ed7bc5d8..4061bacf827064012caa6b103571d8e8040985e0 100644
--- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
index 054909fe5b82b87998c2fbb81bbe17dfd2216417..7cbf04f3d5994745b08a3266e9fe8627a800b5df 100644
--- a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h
@@ -232,6 +232,7 @@
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
#define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@@ -1216,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
index 5691cb1746d5d63f35aa0e1b65d426aaedbfaa75..5909e8709dc1b11f0bf85801d1c468143ce6a880 100644
--- a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration.h b/Marlin/example_configurations/Creality/Ender-3/Configuration.h
index 34851f228b00b5e3483211d932be0afefe077edf..f67ecd3de0c7ebc3c7eb7a2e8ab0722727c8992e 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration.h
@@ -1035,8 +1035,8 @@
#endif
/**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
*/
//#define LCD_BED_LEVELING
diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
index c0a85b0267f7ec14a11b14d4791f1402210fe955..4986f71091917565f2ecfec6cc21d9f610d46dde 100644
--- a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
index 9b0d46e240f91e3eded86bccf50cf5e2ac043c3c..7cbf04f3d5994745b08a3266e9fe8627a800b5df 100644
--- a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 693f8ae14b2a474aebc1147f7a7568ac37849d89..38e52c95baff9864ee55664acaec6a354362e6d5 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
index 070d2cb82bb569e19b6ac90e2d72f10c14aabf6e..c65a05375f35f51da34b0aae23830120d2d4847e 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h
@@ -1012,14 +1012,7 @@
#define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
- #define GRID_MAX_POINTS_Y 10
-
- #define PROBE_PT_1_X 45 // Probing points for 3-Point leveling of the mesh
- #define PROBE_PT_1_Y 170
- #define PROBE_PT_2_X 45
- #define PROBE_PT_2_Y 25
- #define PROBE_PT_3_X 180
- #define PROBE_PT_3_Y 25
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@@ -1046,12 +1039,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 45
+ #define PROBE_PT_1_Y 170
+ #define PROBE_PT_2_X 45
+ #define PROBE_PT_2_Y 25
+ #define PROBE_PT_3_X 180
+ #define PROBE_PT_3_Y 25
#endif
/**
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index 1b0d615794be6777651ef7662f14a9ed2f2a0a3e..1f6fdbe0f357116bddd3debf26cd47a87ef6fc8e 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 87fc8fd0f5d941879275a78148929232e95b8267..5276e910516e18cfa5b0eb1727deff7bfcd5be38 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 87fc8fd0f5d941879275a78148929232e95b8267..5276e910516e18cfa5b0eb1727deff7bfcd5be38 100644
--- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 5e01f74ec0cabd6fdd7e386957c5dce6b38d82c3..ddedf8474372a9ccf2678c11a28bd27ddff119d9 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
index 916133435a77fc4ea9a5d25be4fe98ae6336508f..822a6b31a2d0439f72e9d8224c0900e3e581fb8b 100644
--- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h
index 1fadd066e791ce6398da3735ece1b20e0c661c0e..72746b559ff686bcdb322996bafa65a4859c3094 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration.h
@@ -1013,17 +1013,6 @@
#endif
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
- // 3 arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define PROBE_PT_1_X 50
- #define PROBE_PT_1_Y 150
- #define PROBE_PT_2_X 50
- #define PROBE_PT_2_Y 50
- #define PROBE_PT_3_X 150
- #define PROBE_PT_3_Y 50
-
#elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
@@ -1061,12 +1050,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 50
+ #define PROBE_PT_1_Y 150
+ #define PROBE_PT_2_X 50
+ #define PROBE_PT_2_Y 50
+ #define PROBE_PT_3_X 150
+ #define PROBE_PT_3_Y 50
#endif
/**
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index a9865bfb7162349ea06dac8660a8b87965d51013..b3e2617e75c669c69eabb113d3caa7ac12c84b8c 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index aff032c0fb96106012968c7a291a1ea468a021bd..ae415d8d03d0b53713c358680352d0fcf425cb6f 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
index 62f58dd235d5fd39cd425062c88f03a6136896b3..4c515bbe916302fb79ad76ddcb2eeba46299ef46 100644
--- a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h
@@ -713,6 +713,9 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
* readings with inductive probes and piezo sensors.
*/
//#define PROBING_HEATERS_OFF // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+ //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
//#define PROBING_FANS_OFF // Turn fans off when probing
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 1898461a7aca347586ff976a4e2b477afa3a4cf8..cdb7a53019101d13e44563d662482fbc67e9682b 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 9b9d92df71297ada7756538e053b16a12ef9cbc1..1a42b7c8a7073df69d5e136536ead2ae00c58d80 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index f72a698cb7b0c31f638750dd5e7e92e330afbae1..153efcce7eb0aa58baea586bf69815d516742a55 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index df232ab6ab4e6e7d756a1cb8452e1d7db312da38..8ecf0bf6cb89e3682da320b589ce7c387643e3c7 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h
index 9e478b4542159dd868f73fb9cda1b7b1af7c5f0e..c13b25847b5bce85dca4104b3ce5c125f288a82f 100644
--- a/Marlin/example_configurations/Tronxy/X1/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h
@@ -358,7 +358,7 @@
#define PIDTEMP
#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95 // Smoothing factor within the PID
+#define PID_K1 0.95 // Smoothing factor within any PID loop
#if ENABLED(PIDTEMP)
//#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
//#define PID_DEBUG // Sends debug data to the serial port.
@@ -942,7 +942,7 @@
/**
* Enable the G26 Mesh Validation Pattern tool.
*/
- #define G26_MESH_VALIDATION // Enable G26 mesh validation
+ #define G26_MESH_VALIDATION
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
index cc9c6176f891f72d4a02a2a45ea3682d15dee41a..29fd2a20b26fe4758273fd5c4b71719db003285c 100644
--- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h
+++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h
@@ -1079,8 +1079,8 @@
#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
- #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28).
- #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28).
+ #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
+ #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#endif
// Homing speeds (mm/m)
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index 7f8d70db292d7914fad4f46634501cfe51b3f7a8..087d3ad69751840ee0b8807dddf5ac1d1ed1fd86 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -1230,7 +1230,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index 03ffaef438a77baa731a1760851b971c804da331..65484ec92ebfe3124b590ff68edf805130ccdc2b 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
index da211eb80390d0425d026bee4cb80530cbe21584..7e3cfb969607e5e598dd47f15c748d93e780ea13 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h
@@ -883,7 +883,7 @@
//===========================================================================
//=============================== Bed Leveling ==============================
//===========================================================================
-// @section bedlevel
+// @section calibrate
/**
* Choose one of the options below to enable G29 Bed Leveling. The parameters
@@ -1010,6 +1010,9 @@
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
+ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+ // as the Z-Height correction value.
+
#elif ENABLED(MESH_BED_LEVELING)
//===========================================================================
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index 6a2f02a4889e6c83cd46272792d7876075f2e784..3df0bcfc305ef53fa679a4c326f5fab402edb407 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index bef8b7dbc66802e8ab76383412eb5f2b4f9ed88b..23242fc820ef12209d60dd10c32f1dbd24eb1cc7 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
index 9ad462fc1d0e9b2aa20276810ff9cc64b23e4d55..7a1528a01c5f7de57746035cb4606b67aefcad86 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h
@@ -839,8 +839,7 @@
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
- // Move the probe into position
- #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0
+ #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
index 48552de0dca14bb25038f1c030890cd602f181cf..cca003a52b1e4016300cb98598a8445e5dd5cec0 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
index 7d20849c46cfe52a343185f6a615a8b3ac784f1d..c000a87e6db867cb935ea62b423bcd1a0cd5b261 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@@ -1087,6 +1087,7 @@
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension.
+ // Works best with 5 or more points in each dimension.
#define GRID_MAX_POINTS_X 9
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index c1eba1450848f8ec2cd8823c60dd682329262402..ae0063674b0d85d0a9fee52f420a8fce5966f533 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
index dd25eb4e6c8d2d15a9531a8f6da35f94b291798f..2b76a83b60de383e0662d7c33cba3a69eb8be767 100644
--- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h
@@ -1120,17 +1120,6 @@
#endif
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
- // 3 arbitrary points to probe.
- // A simple cross-product is used to estimate the plane of the bed.
- #define PROBE_PT_1_X -116
- #define PROBE_PT_1_Y -67.5
- #define PROBE_PT_2_X 116
- #define PROBE_PT_2_Y -67.5
- #define PROBE_PT_3_X 0
- #define PROBE_PT_3_Y 135
-
#elif ENABLED(AUTO_BED_LEVELING_UBL)
//===========================================================================
@@ -1168,12 +1157,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X -116
+ #define PROBE_PT_1_Y -67.5
+ #define PROBE_PT_2_X 116
+ #define PROBE_PT_2_Y -67.5
+ #define PROBE_PT_3_X 0
+ #define PROBE_PT_3_Y 135
#endif
/**
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index c1eba1450848f8ec2cd8823c60dd682329262402..ae0063674b0d85d0a9fee52f420a8fce5966f533 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 769fa4b12dc0f62e08e47e5a117c3a271090a521..c1ff2f6f8bd741a506697649c85c0985eb60af9f 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -829,8 +829,7 @@
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
- // Move the probe into position
- #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0
+ #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index c1eba1450848f8ec2cd8823c60dd682329262402..ae0063674b0d85d0a9fee52f420a8fce5966f533 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 8da18ad0253ed39c1fafe247ce765e9f69070f9e..af6a2c22140d5868de2b495d2751c387beb32702 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -864,6 +864,7 @@
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset
+
#define Z_PROBE_OFFSET_RANGE_MIN -15
#define Z_PROBE_OFFSET_RANGE_MAX 5
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 5865ac81164a1210977b9ed0fb675770fef29b32..7782f3590db87062b1b440ea9e0acb71626bdbd1 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -1224,7 +1224,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index ed76c264b56599436a796e05efa5afb0e2a53672..cea7de48fde4acf81c299ba2ca69b9c74acbe618 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -1219,7 +1219,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
index 0b5f8aed5a92ff2aca3a1f8d534c3b7e2636b727..85253036a0a7d2fb098617dd69469840116a4050 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h
@@ -1011,13 +1011,6 @@
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
- #define PROBE_PT_1_X 53 // Probing points for 3-Point leveling of the mesh
- #define PROBE_PT_1_Y 323
- #define PROBE_PT_2_X 53
- #define PROBE_PT_2_Y 63
- #define PROBE_PT_3_X 348
- #define PROBE_PT_3_Y 211
-
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@@ -1043,12 +1036,12 @@
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
- //#define PROBE_PT_1_X 15
- //#define PROBE_PT_1_Y 180
- //#define PROBE_PT_2_X 15
- //#define PROBE_PT_2_Y 20
- //#define PROBE_PT_3_X 170
- //#define PROBE_PT_3_Y 20
+ #define PROBE_PT_1_X 53
+ #define PROBE_PT_1_Y 323
+ #define PROBE_PT_2_X 53
+ #define PROBE_PT_2_Y 63
+ #define PROBE_PT_3_X 348
+ #define PROBE_PT_3_Y 211
#endif
/**
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 7300db029c0f3be60c0338198c45394cd7c577c6..85efd1100886c47528f22a9d365afcd0a5165e5b 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index fab073cde8e9f6716d362569a62c6bf63bf9e973..7ef8f77080a7ecf64523d5f44f8e26143b357e35 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index e06afee8af732f72905b1b8dc9c0becf302b781b..5f9f3ea5a708a7c45b6744515a5a58c0547af818 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -1217,7 +1217,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index a62047ccf76bc27d7cb06f186b011d154ebdb94d..52c25217cc5f67e52721c266b3c6ecd1fc43776b 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -1031,8 +1031,7 @@
* You may also use software SPI if you wish to use general purpose IO pins.
*/
//#define HAVE_TMC2130
-#if ENABLED(HAVE_TMC2130)
- // Choose your axes here. This is mandatory!
+#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory!
//#define X_IS_TMC2130
//#define X2_IS_TMC2130
//#define Y_IS_TMC2130
@@ -1219,7 +1218,7 @@
* stepperY.interpolate(0); \
* }
*/
- #define TMC_ADV() { }
+ #define TMC_ADV() { }
#endif // TMC2130 || TMC2208