From 651f3eeed06175b798ed3619ca325825541a9ac1 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Mon, 17 Jun 2019 20:08:51 -0500
Subject: [PATCH] Clean up trailing whitespace
---
Marlin/src/HAL/HAL_STM32F1/spi_pins.h | 5 +++--
Marlin/src/lcd/menu/menu_advanced.cpp | 2 +-
Marlin/src/lcd/ultralcd.h | 2 +-
Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h | 2 +-
Marlin/src/pins/pins_Z_BOLT_X_SERIES.h | 2 +-
5 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/Marlin/src/HAL/HAL_STM32F1/spi_pins.h b/Marlin/src/HAL/HAL_STM32F1/spi_pins.h
index 388e760584..c2222110a4 100644
--- a/Marlin/src/HAL/HAL_STM32F1/spi_pins.h
+++ b/Marlin/src/HAL/HAL_STM32F1/spi_pins.h
@@ -21,11 +21,12 @@
/**
* HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
*/
+
/**
* Define SPI Pins: SCK, MISO, MOSI, SS
*
* Any PIN can be used for Chip Select (SS)
- *
+ *
* SPI1 is enabled by default
*/
#if ENABLED(ENABLE_SPI3)
@@ -46,4 +47,4 @@
#define MISO_PIN BOARD_SPI1_MISO_PIN
#define MOSI_PIN BOARD_SPI1_MOSI_PIN
#define SS_PIN BOARD_SPI1_NSS_PIN
-#endif
\ No newline at end of file
+#endif
diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp
index 432b37ad27..e709eb339a 100644
--- a/Marlin/src/lcd/menu/menu_advanced.cpp
+++ b/Marlin/src/lcd/menu/menu_advanced.cpp
@@ -616,7 +616,7 @@ void menu_backlash();
void menu_advanced_settings() {
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
lcd_runout_distance_mm = runout.runout_distance();
- #endif
+ #endif
START_MENU();
MENU_BACK(MSG_CONFIGURATION);
diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h
index 97c87dfe11..aa4cc47766 100644
--- a/Marlin/src/lcd/ultralcd.h
+++ b/Marlin/src/lcd/ultralcd.h
@@ -289,7 +289,7 @@ public:
static void abort_print();
static void pause_print();
static void resume_print();
-
+
#if HAS_PRINT_PROGRESS
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
static uint8_t progress_bar_percent;
diff --git a/Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h b/Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
index 99630179e0..221345a0d4 100644
--- a/Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
+++ b/Marlin/src/pins/pins_BIGTREE_SKR_MINI_V1_1.h
@@ -126,7 +126,7 @@
// SD Card
//
-// By default the onboard SD is enabled.
+// By default the onboard SD is enabled.
// To disable it and use an external SD (connected to LCD)
// enable STM32_SD_LCD.
diff --git a/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
index 82673b9a2d..b8d4fdee38 100644
--- a/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
+++ b/Marlin/src/pins/pins_Z_BOLT_X_SERIES.h
@@ -21,7 +21,7 @@
*/
/**
- * Z-Bolt X Series board – based on Arduino Mega2560
+ * Z-Bolt X Series board – based on Arduino Mega2560
*/
#if HOTENDS > 4 || E_STEPPERS > 4
--
GitLab