diff --git a/Marlin/src/HAL/HAL.h b/Marlin/src/HAL/HAL.h
index 60e0df6f2d5a88b34756790756e0b6b75e202ccb..bc7d285e818388a321afbd672bddd06759a10294 100644
--- a/Marlin/src/HAL/HAL.h
+++ b/Marlin/src/HAL/HAL.h
@@ -29,7 +29,7 @@
 #ifndef _HAL_H
 #define _HAL_H
 
-#include "../inc/SPI.h"
+#include "SPI.h"
 
 #ifdef __AVR__
   #include "HAL_AVR/HAL_AVR.h"
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
index 3b4109f0c3141ba140e31b7b7394eaa29de76b27..fc1bfb7550101d0fa886ca70148abdcaf02f3c87 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
@@ -37,7 +37,7 @@
 // --------------------------------------------------------------------------
 
 #include "../HAL.h"
-#include "SPI.h"
+#include "../SPI.h"
 #include "pins_arduino.h"
 #include "spi_pins.h"
 #include "../../core/macros.h"
diff --git a/Marlin/src/HAL/SPI.h b/Marlin/src/HAL/SPI.h
new file mode 100644
index 0000000000000000000000000000000000000000..78e867a1fa879c8fed1ed9944f40ebd2eee9d75c
--- /dev/null
+++ b/Marlin/src/HAL/SPI.h
@@ -0,0 +1,78 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * HAL/SPI.h
+ * Core Marlin definitions for SPI, implemented in the HALs
+ */
+
+#ifndef _SPI_H_
+#define _SPI_H_
+
+//#include "../inc/MarlinConfig.h"
+
+#include <stdint.h>
+
+#ifndef SPI_FULL_SPEED
+
+/**
+ * SPI speed where 0 <= index <= 6
+ *
+ * Approximate rates :
+ *
+ *  0 :  8 - 10 MHz
+ *  1 :  4 - 5 MHz
+ *  2 :  2 - 2.5 MHz
+ *  3 :  1 - 1.25 MHz
+ *  4 :  500 - 625 kHz
+ *  5 :  250 - 312 kHz
+ *  6 :  125 - 156 kHz
+ *
+ *  On AVR, actual speed is F_CPU/2^(1 + index).
+ *  On other platforms, speed should be in range given above where possible.
+ */
+
+#define SPI_FULL_SPEED      0   // Set SCK to max rate
+#define SPI_HALF_SPEED      1   // Set SCK rate to half of max rate
+#define SPI_QUARTER_SPEED   2   // Set SCK rate to quarter of max rate
+#define SPI_EIGHTH_SPEED    3   // Set SCK rate to 1/8 of max rate
+#define SPI_SIXTEENTH_SPEED 4   // Set SCK rate to 1/16 of max rate
+#define SPI_SPEED_5         5   // Set SCK rate to 1/32 of max rate
+#define SPI_SPEED_6         6   // Set SCK rate to 1/64 of max rate
+
+// Standard SPI functions
+/** Initialise SPI bus */
+void spiBegin(void);
+/** Configure SPI for specified SPI speed */
+void spiInit(uint8_t spiRate);
+/** Write single byte to SPI */
+void spiSend(uint8_t b);
+/** Read single byte from SPI */
+uint8_t spiRec(void);
+/** Read from SPI into buffer */
+void spiRead(uint8_t* buf, uint16_t nbyte);
+/** Write token and then write from 512 byte buffer to SPI (for SD card) */
+void spiSendBlock(uint8_t token, const uint8_t* buf);
+
+#endif // SPI_FULL_SPEED
+
+#endif // _SPI_H_
diff --git a/Marlin/src/inc/MarlinConfig.h b/Marlin/src/inc/MarlinConfig.h
index 25d56cf0064d7af141d87fd239bcdde8b36194bb..ea542fcda3a7394baa88fe85a4bf9e902eb70ede 100644
--- a/Marlin/src/inc/MarlinConfig.h
+++ b/Marlin/src/inc/MarlinConfig.h
@@ -26,7 +26,7 @@
 #include "../core/boards.h"
 #include "../core/macros.h"
 #include "Version.h"
-#include "SPI.h"
+#include "../HAL/SPI.h"
 #include "../../Configuration.h"
 #include "Conditionals_LCD.h"
 #include "../../Configuration_adv.h"
diff --git a/Marlin/src/inc/SPI.h b/Marlin/src/inc/SPI.h
deleted file mode 100644
index 3fa0cecceba47f3153810ae5d9e82eff019f4347..0000000000000000000000000000000000000000
--- a/Marlin/src/inc/SPI.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <stdint.h>
-
-
-#ifndef SPI_FULL_SPEED
-
-/**
- * SPI speed where 0 <= index <= 6
- *
- * Approximate rates :
- *
- *  0 :  8 - 10 MHz
- *  1 :  4 - 5 MHz
- *  2 :  2 - 2.5 MHz
- *  3 :  1 - 1.25 MHz
- *  4 :  500 - 625 kHz
- *  5 :  250 - 312 kHz
- *  6 :  125 - 156 kHz
- *
- *  On AVR, actual speed is F_CPU/2^(1 + index).
- *  On other platforms, speed should be in range given above where possible.
- */
-
-/** Set SCK to max rate */
-#define SPI_FULL_SPEED 0
-/** Set SCK rate to half max rate. */
-#define SPI_HALF_SPEED 1
-/** Set SCK rate to quarter max rate. */
-#define SPI_QUARTER_SPEED 2
-/** Set SCK rate to 1/8 max rate. */
-#define SPI_EIGHTH_SPEED 3
-/** Set SCK rate to 1/16 of max rate. */
-#define SPI_SIXTEENTH_SPEED 4
-/** Set SCK rate to 1/32 of max rate. */
-#define SPI_SPEED_5 5
-/** Set SCK rate to 1/64 of max rate. */
-#define SPI_SPEED_6 6
-
-// Standard SPI functions
-/** Initialise SPI bus */
-void spiBegin(void);
-/** Configure SPI for specified SPI speed */
-void spiInit(uint8_t spiRate);
-/** Write single byte to SPI */
-void spiSend(uint8_t b);
-/** Read single byte from SPI */
-uint8_t spiRec(void);
-/** Read from SPI into buffer */
-void spiRead(uint8_t* buf, uint16_t nbyte);
-/** Write token and then write from 512 byte buffer to SPI (for SD card) */
-void spiSendBlock(uint8_t token, const uint8_t* buf);
-
-#endif