diff --git a/Marlin/language.h b/Marlin/language.h
index c5a3d50082a3a60ea8d6fd122bef4a4d8854a452..26fd1a26e556bb8ef9e3b76098d76865f627ef11 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -40,16 +40,20 @@
#define MACHINE_NAME "Mendel"
#endif
- #define FIRMWARE_URL "http://www.mendel-parts.com"
+// Default firmware set to Mendel
+ #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
#endif
+
#ifndef MACHINE_UUID
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
#endif
+
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
+
#if LANGUAGE_CHOICE == 1
// LCD Menu Messages
@@ -234,7 +238,7 @@
#if LANGUAGE_CHOICE == 2
// LCD Menu Messages
- #define WELCOME_MSG MACHINE_NAME " Gotowe."
+ #define WELCOME_MSG MACHINE_NAME " gotowy."
#define MSG_SD_INSERTED "Karta wlozona"
#define MSG_SD_REMOVED "Karta usunieta"
#define MSG_MAIN "Menu glowne"
@@ -247,22 +251,22 @@
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
#define MSG_COOLDOWN "Chlodzenie"
- #define MSG_SWITCH_PS_ON "Wl. zasilacz"
- #define MSG_SWITCH_PS_OFF "Wyl. zasilacz"
+ #define MSG_SWITCH_PS_ON "Wlacz zasilacz"
+ #define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
#define MSG_EXTRUDE "Ekstruzja"
#define MSG_RETRACT "Cofanie"
#define MSG_MOVE_AXIS "Ruch osi"
- #define MSG_MOVE_X "Move X"
- #define MSG_MOVE_Y "Move Y"
- #define MSG_MOVE_Z "Move Z"
- #define MSG_MOVE_E "Extruder"
- #define MSG_MOVE_01MM "Move 0.1mm"
- #define MSG_MOVE_1MM "Move 1mm"
- #define MSG_MOVE_10MM "Move 10mm"
+ #define MSG_MOVE_X "Przesun w X"
+ #define MSG_MOVE_Y "Przesun w Y"
+ #define MSG_MOVE_Z "Przesun w Z"
+ #define MSG_MOVE_E "Ekstruzja (os E)"
+ #define MSG_MOVE_01MM "Przesuwaj co 0.1mm"
+ #define MSG_MOVE_1MM "Przesuwaj co 1mm"
+ #define MSG_MOVE_10MM "Przesuwaj co 10mm"
#define MSG_SPEED "Predkosc"
#define MSG_NOZZLE "Dysza"
- #define MSG_NOZZLE1 "Dysza2"
- #define MSG_NOZZLE2 "Dysza3"
+ #define MSG_NOZZLE1 "Dysza 2"
+ #define MSG_NOZZLE2 "Dysza 3"
#define MSG_BED "Loze"
#define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_FLOW "Przeplyw"
@@ -270,14 +274,14 @@
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Mnoznik"
- #define MSG_AUTOTEMP "Auto. temp."
+ #define MSG_AUTOTEMP "Auto. temperatura"
#define MSG_ON "Wl. "
#define MSG_OFF "Wyl."
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
- #define MSG_ACC "Acc"
+ #define MSG_ACC "Przyspieszenie"
#define MSG_VXY_JERK "Zryw Vxy"
#define MSG_VZ_JERK "Zryw Vz"
#define MSG_VE_JERK "Zryw Ve"
@@ -312,7 +316,7 @@
#define MSG_CARD_MENU "Menu karty SD"
#define MSG_NO_CARD "Brak karty"
#define MSG_DWELL "Uspij..."
- #define MSG_USERWAIT "Czekaj na uzytkownika..."
+ #define MSG_USERWAIT "Czekam na uzytkownika..."
#define MSG_RESUMING "Wznawiam drukowanie"
#define MSG_NO_MOVE "Brak ruchu."
#define MSG_PART_RELEASE "Czesciowe zwolnienie"
@@ -326,16 +330,16 @@
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
#define MSG_AUTORETRACT "Auto. wycofanie"
#define MSG_FILAMENTCHANGE "Zmien filament"
- #define MSG_INIT_SDCARD "Uruchom karte SD"
- #define MSG_CNG_SDCARD "Zmien karte SD"
+ #define MSG_INIT_SDCARD "Inicjalizacja karty"
+ #define MSG_CNG_SDCARD "Zmiana karty SD"
#define MSG_ZPROBE_OUT "Probkuj Z poza lozem"
- #define MSG_POSITION_UNKNOWN "Domuj X/Y przed Z"
- #define MSG_ZPROBE_ZOFFSET "Z Offset"
+ #define MSG_POSITION_UNKNOWN "Powrot w X/Y przed Z"
+ #define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
- #define MSG_ENDSTOP_ABORT "Endstop abort"
- #define MSG_CONTRAST "Contrast"
+ #define MSG_ENDSTOP_ABORT "Blad wyl. krancowego"
+ #define MSG_CONTRAST "Kontrast"
// Serial Console Messages
@@ -350,7 +354,7 @@
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
#define MSG_FREE_MEMORY " Wolna pamiec: "
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
- #define MSG_OK "ok"
+ #define MSG_OK "OK"
#define MSG_FILE_SAVED "Plik zapisany."
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
@@ -370,7 +374,7 @@
#define MSG_BED_HEATING "Nagrzewanie loza..."
#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
- #define MSG_COUNT_X " Liczenie X: "
+ #define MSG_COUNT_X " Licznik X: "
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
#define MSG_RESEND "Wyslij ponownie: "
@@ -386,7 +390,7 @@
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
#define MSG_ENDSTOP_HIT "Wyzwolony"
#define MSG_ENDSTOP_OPEN "Otwarty"
- #define MSG_HOTEND_OFFSET "Hotend offsets:"
+ #define MSG_HOTEND_OFFSET "Offsety dysz:"
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
@@ -401,16 +405,16 @@
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
- #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
+ #define MSG_SD_ERR_WRITE_TO_FILE "Wystapil blad podczas zapisu do pliku"
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
#define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
- #define MSG_BABYSTEPPING_X "Babystepping X"
- #define MSG_BABYSTEPPING_Y "Babystepping Y"
- #define MSG_BABYSTEPPING_Z "Babystepping Z"
+ #define MSG_BABYSTEPPING_X "Babystepping w osi X"
+ #define MSG_BABYSTEPPING_Y "Babystepping w osi Y"
+ #define MSG_BABYSTEPPING_Z "Babystepping w osi Z"
#endif